![]() |
Table Of Contents
Release Notes for Cisco CRS-1 and Cisco CRS-3 for Cisco IOS XR Software Release 4.1.2
Determining Your Software Version
Cisco CRS-1 show version Output
Cisco CRS-3 show version Output
New Cisco CRS Router Software Features
ISSU (In-Service Software Upgrade)
New Hardware Features for the Cisco CRS router
Cisco CRS Series 8-slot Line Card Chassis (LCC) Enhanced Router
New DWDM Configuration Requirement
Summary of Important DWDM Changes in Cisco IOS XR Software Release 3.9.0 and Later Releases
Configuration Examples in Cisco IOS XR Software Release 3.9.0 and Later Releases
Minimum Flash Disk Requirements When Upgrading to Release 4.1.2
Caveats Specific to the Cisco CRS-1 Router
Caveats Specific to the Cisco CRS-3 Router
Upgrading Cisco IOS XR Software
Migrating Cisco CRS-1 to Cisco CRS-3
Obtaining Documentation and Submitting a Service Request
Release Notes for Cisco CRS-1 and Cisco CRS-3 for Cisco IOS XR Software Release 4.1.2
March 15, 2013
Cisco IOS XR Software Release 4.1.2
Text Part Number OL-26129-01
These release notes describe the features provided in the Cisco IOS XR Software Release 4.1.2 for the Cisco CRS router and are updated as needed.
Note
For information on the Cisco CRS router running Cisco IOS XR Software Release 4.1.2, see the "Important Notes" section.
You can find the most current Cisco IOS XR Software documentation at
http://www.cisco.com/en/US/products/ps5763/tsd_products_support_series_home.html
These electronic documents may contain updates and modifications. For more information on obtaining Cisco documentation, see the "Obtaining Documentation and Submitting a Service Request".
For a list of software caveats that apply to Cisco IOS XR Software Release 4.1.2, see the "Caveats" section. The caveats are updated for every release and are described at www.cisco.com.
We recommend that you view the field notices for this release located at the following URL to see if your software or hardware platforms are affected:
http://www.cisco.com/public/support/tac/fn_index.html
Contents
These release notes contain the following sections:
•
Determining Your Software Version
•
New Cisco CRS Router Software Features
•
New Hardware Features for the Cisco CRS router
•
Upgrading Cisco IOS XR Software
•
Migrating Cisco CRS-1 to Cisco CRS-3
•
Obtaining Documentation and Submitting a Service Request
Introduction
Cisco IOS XR Software is a distributed operating system designed for continuous system operation combined with service flexibility and high performance.
Cisco IOS XR Software running on the Cisco CRS router provides the following features and benefits:
•
IP and Routing—This supports a wide range of IPv4 and IPv6 services and routing protocols; such as Border Gateway Protocol (BGP), Routing Information Protocol (RIPv2), Intermediate System-to-Intermediate System (IS-IS), Open Shortest Path First (OSPF), IP Multicast, Routing Policy Language (RPL), Hot Standby Router Protocol (HSRP), and Virtual Router Redundancy Protocol features (VRRP).
•
BGP Prefix Independent Convergence—This provides the ability to converge BGP routes within sub seconds instead of multiple seconds. The Forwarding Information Base (FIB) is updated, independent of a prefix, to converge multiple 100K BGP routes with the occurrence of a single failure. This convergence is applicable to both core and edge failures and with or without MPLS. This fast convergence innovation is unique to Cisco IOS XR Software.
•
Multiprotocol Label Switching (MPLS)—This supports MPLS protocols, including Traffic Engineering (TE), Resource Reservation Protocol (RSVP), Label Distribution Protocol (LDP), Virtual Private LAN Service (VPLS), Layer 2 Virtual Private Network (L2VPN), and Layer 3 Virtual Private Network (L3VPN).
•
Multicast—This provides comprehensive IP Multicast software including Source Specific Multicast (SSM) and Protocol Independent Multicast (PIM) in Sparse Mode only, and Bidirectional Protocol Independent Multicast (BIDIR-PIM).
•
Quality of Service (QoS)—This supports QoS mechanisms including policing, marking, queuing, random and hard traffic dropping, and shaping. Additionally, Cisco IOS XR Software also supports modular QoS command-line interface (MQC). MQC is used to configure QoS features.
•
Manageability—This provides industry-standard management interfaces including modular command-line interface (CLI), Simple Network Management Protocol (SNMP), and native Extensible Markup Language (XML) interfaces. It includes a comprehensive set of Syslog messages.
•
Security— This provides comprehensive network security features including access control lists (ACLs), routing authentications, Authentication, Authorization, and Accounting (AAA)/Terminal Access Controller Access Control System (TACACS+), Secure Shell (SSH); Management Plane Protection (MPP) for management plane security, and Simple Network Management Protocol version3 (SNMPv3). Control plane protections integrated into line card Application-Specific Integrated Circuits (ASICs) include Generalized TTL Security Mechanism (GTSM), RFC 3682, and Dynamic Control Plane Protection (DCPP).
•
Availability—This supports rich availability features such as fault containment, fault tolerance, fast switchover, link aggregation, nonstop routing for ISIS, LDP, BGP, and OSPF, and nonstop forwarding (NSF).
•
Multicast service delivery in SP NGN—MVPNv4 support carries multicast traffic over an ISP MPLS core network.
•
IPv6 Provider Edge Router support for IPv6 applications—This delivers IPv6 traffic over an IPv4/MPLS core with IPv6 provider edge router (6PE) support.
•
IPv6 VPN over MPLS (6VPE) support—This delivers IPv6 VPN over MPLS (IPv6) VPN traffic over an IPv4 or MPLS core with 6VPE support.
•
Carrier Grade Network Address Translation (CGN)—This enables service providers to execute orderly transitions to IPv6 through mixed IPv4 and IPv6 networks. CGN provides address family translation but is not limited to just translation within one address family. CGN delivers a comprehensive solution suite for IP address management and IPv6 transition.
•
Enhanced core competencies:
–
IP fast convergence with Fast Reroute (FRR) is supported for Intermediate System-to-Intermediate System (IS-IS) and OSPF.
–
Traffic engineering is supported for unequal load balancing.
–
Traffic engineering over generic routing encapsulation (GRE) tunnel interfaces—LDP, L2VPN, and L3VPN over TE over GRE are supported. VPN routes over TE and over GRE require a labelled path for path resolution.
–
VRF is supported for GRE tunnel interfaces under a VRF. However, the GRE tunnel source and destination are in the global table.
–
RSVP is supported over GRE tunnels.
–
Traffic engineering is supported with Path Computation Element (PCE) capability.
For more information about new features provided on the Cisco CRS router for Cisco IOS XR Software Release 4.1.2, see the "New Cisco CRS Router Software Features" section in this document.
System Requirements
This section describes the system requirements for Cisco IOS XR Software Release 4.1.2 supported on the Cisco CRS router. The system requirements include the following information:
•
Cisco CRS-1 Feature Set Table
To determine the software versions or levels of your current system, see the "Determining Your Software Version" section.
Cisco CRS-1 Feature Set Table
Cisco IOS XR Software is packaged in feature sets (also called software images). Each feature set contains a specific set of Cisco IOS XR Software Release 4.1.2 features.
Table 1 lists the Cisco IOS XR Software feature set matrix (PIE files) and associated filenames available for the Cisco IOS XR Software Release 4.1.2 supported on the Cisco CRS-1 Series Router.
Table 1 Cisco CRS-1 Supported Feature Sets
(Cisco IOS XR Software Release 4.1.2 PIE Files) Feature Set Filename Description Composite PackageCisco IOS XR IP Unicast Routing Core Bundle
hfr-mini-p-4.1.2
Contains the required core packages, including OS, Admin, Base, Forwarding, Modular Services Card, Routing, SNMP Agent, and Alarm Correlation.
Cisco IOS XR IP Unicast Routing Core Bundle
hfr-mini-p.vm-4.1.2
Contains the required core packages including OS, Admin, Base, Forwarding, Modular Services Card, Routing, SNMP Agent, and Alarm Correlation.
Optional Individual Packages1Cisco IOS XR Manageability Package
hfr-mgbl-p.pie-4.1.2
Cisco IOS XR MPLS Package
hfr-mpls-p.pie-4.1.2
MPLS-TE,4 LDP,5 MPLS Forwarding, MPLS OAM,6 LMP,7 OUNI,8 RSVP,9 and Layer-2 VPN and Layer-3 VPN.
Cisco IOS XR Multicast Package
hfr-mcast-p.pie-4.1.2
Multicast Routing Protocols (PIM, MSDP,10 IGMP,11 Auto-RP), Tools (SAP, MTrace), and Infrastructure (MRIB,12 MURIB13 , MFWD14 ), and BIDIR-PIM.15
Cisco IOS XR Security Package
hfr-k9sec-p.pie-4.1.2
Support for Encryption, Decryption, IPSec,16 SSH,17 SSL,18 and PKI19 (Software based IPSec support—maximum of 500 tunnels)
Cisco IOS XR FPD Package
hfr-fpd-p.pie-4.1.2
Firmware for Fixed PLIM20 and SPA21 modules as well as ROMMON22 images for Cisco CRS chassis.
Cisco IOS XR Diagnostic Package
hfr-diags-p.pie-4.1.2
Diagnostic utilities for Cisco IOS XR routers.
Cisco IOS XR Documentation Package
hfr-doc-p.pie-4.1.2
.man pages for Cisco IOS XR software on the Cisco CRS chassis.
Cisco IOS XR Carrier Grade NAT Package
hfr-cgn-p.pie-4.1.2
Support for Carrier Grade NAT on Cisco CRS routers.
1 Packages are installed individually
2 Common Object Request Broker Architecture
3 Extensible Markup Language
4 MPLS Traffic Engineering
5 Label Distribution Protocol
6 Operations, Administration, and Maintenance
7 Link Manager Protocol
8 Optical User Network Interface
9 Resource Reservation Protocol
10 Multicast Source Discovery Protocol
11 Internet Group Management Protocol
12 Multicast Routing Information Base
13 Multicast-Unicast RIB
14 Multicast forwarding
15 Bidirectional Protocol Independent Multicast
16 IP Security
17 Secure Shell
18 Secure Socket Layer
19 Public-key infrastructure
20 Physical layer interface module
21 Shared port adapters
22 ROM monitor
Table 2 lists the Cisco CRS-1 Router TAR files.
Cisco CRS-3 Feature Set Table
Table 3 lists the Cisco IOS XR Software feature set matrix (PIE files) and associated filenames available for the Cisco IOS XR Software Release 4.1.2 supported on the Cisco CRS-3 Router.
Table 3 Cisco CRS-3 Supported Feature Sets
(Cisco IOS XR Software Release 4.1.2 PIE Files) Feature Set Filename Description Composite PackageCisco IOS XR IP Unicast Routing Core Bundle
hfr-mini-px-4.1.2
Contains the required core packages, including OS, Admin, Base, Forwarding, Modular Services Card, Routing, SNMP Agent, and Alarm Correlation.
Cisco IOS XR IP Unicast Routing Core Bundle
hfr-mini-px.vm-4.1.2
Contains the required core packages including OS, Admin, Base, Forwarding, Modular Services Card, Routing, SNMP Agent, and Alarm Correlation.
Optional Individual Packages1Cisco IOS XR Manageability Package
hfr-mgbl-px.pie-4.1.2
Cisco IOS XR MPLS Package
hfr-mpls-px.pie-4.1.2
MPLS-TE,4 LDP,5 MPLS Forwarding, MPLS OAM,6 LMP,7 OUNI,8 RSVP,9 and Layer-2 VPN and Layer-3 VPN.
Cisco IOS XR Multicast Package
hfr-mcast-px.pie-4.1.2
Multicast Routing Protocols (PIM, MSDP,10 IGMP,11 Auto-RP), Tools (SAP, MTrace), and Infrastructure (MRIB,12 MURIB13 , MFWD14 ), and BIDIR-PIM.15
Cisco IOS XR Security Package
hfr-k9sec-px.pie-4.1.2
Support for Encryption, Decryption, IPSec,16 SSH,17 SSL,18 and PKI19 (Software based IPSec support—maximum of 500 tunnels)
Cisco IOS XR FPD Package
hfr-fpd-px.pie-4.1.2
Firmware for Fixed PLIM20 and SPA21 modules as well as ROMMON22 images for Cisco CRS chassis.
Cisco IOS XR Diagnostic Package
hfr-diags-px.pie-4.1.2
Diagnostic utilities for Cisco IOS XR routers.
Cisco IOS XR Documentation Package
hfr-doc-px.pie-4.1.2
.man pages for Cisco IOS XR software on the Cisco CRS chassis.
Cisco IOS XR Carrier Grade NAT Package
hfr-cgn-px.pie-4.1.2
Support for Carrier Grade NAT on Cisco CRS routers.
1 Packages are installed individually
2 Common Object Request Broker Architecture
3 Extensible Markup Language
4 MPLS Traffic Engineering
5 Label Distribution Protocol
6 Operations, Administration, and Maintenance
7 Link Manager Protocol
8 Optical User Network Interface
9 Resource Reservation Protocol
10 Multicast Source Discovery Protocol
11 Internet Group Management Protocol
12 Multicast Routing Information Base
13 Multicast-Unicast RIB
14 Multicast forwarding
15 Bidirectional Protocol Independent Multicast
16 IP Security
17 Secure Shell
18 Secure Socket Layer
19 Public-key infrastructure
20 Physical layer interface module
21 Shared port adapters
22 ROM monitor
Table 4 lists the Cisco CRS-3 Router TAR files.
Memory Requirements
CautionIf you remove the media in which the software image or configuration is stored, the router may become unstable and fail.
The minimum memory requirements for a Cisco CRS running Cisco IOS XR Software Release 4.1.2 consist of the following:
•
4-GB memory on the route processors (RPs)
•
2-GB memory on Modular Services Card (MSC-40) and Forwarding Processor (FP-40)
•
4-GB memory on MSC-140 and FP-140
•
4-GB USB on MSC-140 and FP-140
•
2-GB PCMCIA Flash Disk
Hardware Supported
All hardware features are supported on Cisco IOS XR Software, subject to the memory requirements specified in the "Memory Requirements" section.
Table 5 lists the supported hardware components on the Cisco CRS and the minimum required software versions. For more information, see the "Other Firmware Support" section.
Note
With Cisco IOS XR Software Release 4.1.0 PX, the CRS MSC-140 or CRS FP-140 can now be used for Provider (P) and Provider Edge (PE) Layer 3 router configurations, including Layer 3 VPN features. With Cisco IOS XR Software Release 4.1.0, CRS MSC-140 or CRS FP-140 now supports Layer 2 VPN functionality. Please contact your Cisco representative for more information.
The CRS FP40 is compatible with the following PLIMs:
•
4-10GE
•
42-1GE
•
20-1GE-FLEX
•
2-10GE-WL-FLEX
•
4-10GBE-WL-XFP
•
8-10GBE-WL-XFP
•
4-10GE-ITU/C
RP-B with CRS-3 is not supported for Multichassis systems; only PRP is supported for such systems. Cisco highly recommends PRP for all CRS-1, CRS-3 Single chassis and Multichassis configurations, due to its significant advantages in improving boot time, performance, and scale. For information on End-of-Sale and End-of-Life Announcement for the Cisco CRS 8-Slot and 16-slot Line Card Chassis Route Processors:
http://www.cisco.com/en/US/partner/prod/collateral/routers/ps5763/end_of_life_notice_c51-695816.html
http://www.cisco.com/en/US/partner/prod/collateral/routers/ps5763/end_of_life_notice_c51-695817.html
CRS FP-140 Licenses
The following licenses apply to the CRS FP-140:
CRS CGSE-PLIM Licenses
The following licenses apply to the Cisco CRS-1 Series Carrier Grade Service Engine PLIM in Cisco IOS XR software Release 4.1.2.
Software Compatibility
Cisco IOS XR Software Release 4.1.2 is compatible with the following Cisco CRS-1 systems:
•
Cisco CRS 4-Slot Line Card Chassis
•
Cisco CRS 8-Slot Line Card Chassis
•
Cisco CRS 16-Slot Line Card Chassis
•
Cisco CRS Multishelf Systems
Cisco IOS XR Software Release 4.1.2 is compatible with the following Cisco CRS-3 systems:
•
Cisco CRS 4-Slot Line Card Chassis
•
Cisco CRS 8-Slot Line Card Chassis
•
Cisco CRS 16-Slot Line Card Chassis
Other Firmware Support
The Cisco CRS router supports the following firmware code:
•
The minimum ROMMON version required for this release is 2.03. For more information about ROMMON specifications, see http://www.cisco.com/web/Cisco_IOS_XR_Software/index.html. For information about upgrading the ROMMON, refer to the Cisco IOS XR ROM Monitor Guide for the Cisco CRS-1 Router at:
http://www.cisco.com/en/US/products/ps5763/products_installation_and_configuration_guides_list.html•
The minimum CPUCNTRL version required for this release is 2.07. For more information about CPU controller bits, refer to the Cisco IOS XR System Management Configuration Guide for the Cisco CRS-1 Router at: http://www.cisco.com/en/US/products/ps5763/products_installation_and_configuration_guides_list.html
•
If the FPDs need an upgrade or a downgrade, use the admin upgrade hw-module fpd command.
•
At least one FPD is running the minimum supported software version. To upgrade this FPD, use the admin upgrade hw-module fpd force.
Check the firmware needed by running the show fpd package command in admin mode.
Cisco CRS-1 show fpd package Output
RP/0/RP0/CPU0:router(admin)#show fpd package
Wed Nov 23 10:54:39.283 PST=============================== ================================================Field Programmable Device Package================================================SW Min Req Min ReqCard Type FPD Description Type Subtype Version SW Ver HW Vers==================== ========================== ==== ======= =========== ======== ========S2 FPGA 4.02 lc fpga2 4.02 0.0 0.0FPGA 5.00 lc fpga3 5.00 0.0 0.0FPGA 6.04 spb lc fpga1 6.04 0.0 0.0ROMMONA swv2.05 spb lc rommonA 2.05 2.5 0.0ROMMONB swv2.05 spb lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------140G-S1S2S3 FPGA 4.01 lc fpga2 4.01 0.0 0.0FPGA 6.04 spb lc fpga1 6.04 0.0 0.0ROMMONA swv2.05 spb lc rommonA 2.05 2.5 0.0ROMMONB swv2.05 spb lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------Fabric HS123 Superst FPGA 4.00 lc fpga2 4.00 0.0 0.0FPGA 6.04 spb lc fpga1 6.04 0.0 0.0ROMMONA swv2.05 spb lc rommonA 2.05 2.5 0.0ROMMONB swv2.05 spb lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------140G-4-S1S2S3 FPGA 4.01 lc fpga2 4.01 0.0 0.0FPGA 6.04 spb lc fpga1 6.04 0.0 0.0ROMMONA swv2.05 spb lc rommonA 2.05 2.5 0.0ROMMONB swv2.05 spb lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------140G-S1S3 FPGA 4.01 lc fpga2 4.01 0.0 0.0FPGA 6.04 spb lc fpga1 6.04 0.0 0.0ROMMONA swv2.05 spb lc rommonA 2.05 2.5 0.0ROMMONB swv2.05 spb lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------140G-S1S2S3-2 FPGA 4.01 lc fpga2 4.01 0.0 0.0FPGA 6.04 spb lc fpga1 6.04 0.0 0.0ROMMONA swv2.05 spb lc rommonA 2.05 2.5 0.0ROMMONB swv2.05 spb lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------140G-S1S3-2 FPGA 4.01 lc fpga2 4.01 0.0 0.0FPGA 6.04 spb lc fpga1 6.04 0.0 0.0ROMMONA swv2.05 spb lc rommonA 2.05 2.5 0.0ROMMONB swv2.05 spb lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------140G-S2-2 FPGA 4.02 lc fpga2 4.02 0.0 0.0FPGA 16.00 lc fpga3 16.00 0.0 0.0FPGA 6.04 spb lc fpga1 6.04 0.0 0.0ROMMONA swv2.05 spb lc rommonA 2.05 2.5 0.0ROMMONB swv2.05 spb lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------140G-MSC FPGA Linecard 0.36 lc fpga2 0.36 0.0 0.0FPGA CPU 0.8 lc fpga1 0.08 0.0 0.0ROMMONA swv2.05 kensho lc rommonA 2.05 2.4 0.0ROMMONB swv2.05 kensho lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------FP-140G FPGA Linecard 0.36 lc fpga2 0.36 0.0 0.0FPGA CPU 0.8 lc fpga1 0.08 0.0 0.0ROMMONA swv2.05 kensho lc rommonA 2.05 2.4 0.0ROMMONB swv2.05 kensho lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------CRS-LSP FPGA Linecard 0.36 lc fpga2 0.36 0.0 0.0FPGA CPU 0.8 lc fpga1 0.08 0.0 0.0ROMMONA swv2.05 kensho lc rommonA 2.05 2.4 0.0ROMMONB swv2.05 kensho lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------1OC768-ITU/C OPTICS FIRMWARE 110B10 lc fpga2 110.10 0.0 0.0------------------------------------------------------------------------------------------1OC768-DWDM-L OPTICS FIRMWARE 110B10 lc fpga2 110.10 0.0 0.0------------------------------------------------------------------------------------------1OC768-DPSK/C OPTICS FIRMWARE 110B14 lc fpga2 110.14 0.0 0.0------------------------------------------------------------------------------------------1OC768-DPSK/C-O OPTICS FIRMWARE 110B14 lc fpga2 110.14 0.0 0.0------------------------------------------------------------------------------------------1OC768-DPSK/C-E OPTICS FIRMWARE 110B14 lc fpga2 110.14 0.0 0.0------------------------------------------------------------------------------------------CRS-CGSE-PLIM FPGA mCPU0 0.559 lc fpga2 0.559 0.0 0.0FPGA sCPU0 0.559 lc fpga3 0.559 0.0 0.0FPGA mCPU1 0.559 lc fpga4 0.559 0.0 0.0FPGA sCPU1 0.559 lc fpga5 0.559 0.0 0.0FPGA PLIM_SVC 0.41014 lc fpga1 0.41014 0.0 0.0------------------------------------------------------------------------------------------20-10GBE PLIM FPGA 42.0 lc fpga3 42.00 0.0 0.0------------------------------------------------------------------------------------------12-10GBE PLIM FPGA 42.0 lc fpga3 42.00 0.0 0.0------------------------------------------------------------------------------------------1-100GBE PLIM FPGA 19.0 lc fpga3 19.00 0.0 0.0RX MAC FPGA 49.0 lc fpga4 49.00 0.0 0.0TX MAC FPGA 34.0 lc fpga5 34.00 0.0 0.0------------------------------------------------------------------------------------------14-10GBE PLIM FPGA 42.0 lc fpga3 42.00 0.0 0.0------------------------------------------------------------------------------------------DRP_B FPGA 6.04 spb lc fpga1 6.04 0.0 0.0ROMMONA swv2.05 asmp lc rommonA 2.05 2.1 0.0ROMMONA swv2.05 dsmp lc rommonA 2.05 2.1 0.0ROMMONA swv2.05 sp lc rommonA 2.05 2.1 0.0ROMMONA swv2.05 spb lc rommonA 2.05 2.5 0.0ROMMONB swv2.05 asmp lc rommon 2.05 2.5 0.0ROMMONB swv2.05 dsmp lc rommon 2.05 2.5 0.0ROMMONB swv2.05 sp lc rommon 2.05 2.5 0.0ROMMONB swv2.05 spb lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------MSC_B FPGA 6.04 spb lc fpga1 6.04 0.0 0.0ROMMONA swv2.05 asmp lc rommonA 2.05 2.1 0.0ROMMONA swv2.05 dsmp lc rommonA 2.05 2.1 0.0ROMMONA swv2.05 sp lc rommonA 2.05 2.1 0.0ROMMONA swv2.05 spb lc rommonA 2.05 2.5 0.0ROMMONB swv2.05 asmp lc rommon 2.05 2.5 0.0ROMMONB swv2.05 dsmp lc rommon 2.05 2.5 0.0ROMMONB swv2.05 sp lc rommon 2.05 2.5 0.0ROMMONB swv2.05 spb lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------FP40 FPGA 6.04 spb lc fpga1 6.04 0.0 0.0ROMMONA swv2.05 asmp lc rommonA 2.05 2.1 0.0ROMMONA swv2.05 dsmp lc rommonA 2.05 2.1 0.0ROMMONA swv2.05 sp lc rommonA 2.05 2.1 0.0ROMMONA swv2.05 spb lc rommonA 2.05 2.5 0.0ROMMONB swv2.05 asmp lc rommon 2.05 2.5 0.0ROMMONB swv2.05 dsmp lc rommon 2.05 2.5 0.0ROMMONB swv2.05 sp lc rommon 2.05 2.5 0.0ROMMONB swv2.05 spb lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------CRS1-SIP-800 JACKET FPGA swv6.0 lc fpga1 6.00 5.0 0.0FPGA swv6.0 hwv80 lc fpga1 6.00 5.0 0.80------------------------------------------------------------------------------------------8-10GBE FPGA swvA.0 lc fpga1 10.00 0.0 0.0------------------------------------------------------------------------------------------OC48-POS-16-ED FPGA PLIM_OC48 9.0 lc fpga1 9.00 0.0 0.0------------------------------------------------------------------------------------------4-10GBE FPGA sw_4p_v15.0 lc fpga1 15.00 0.0 0.0------------------------------------------------------------------------------------------8-10GBE FPGA sw_8p_v15.0 lc fpga1 15.00 0.0 0.0------------------------------------------------------------------------------------------4-10GE SQUIRREL FPGA 10.0 lc fpga1 10.00 0.0 0.0------------------------------------------------------------------------------------------42-1GE FPGA swv6.0 lc fpga1 6.00 0.0 0.0FPGA swv6.0 hwv0.80 lc fpga1 6.00 0.0 0.80------------------------------------------------------------------------------------------20-1GE-FLEX FPGA swv6.0 lc fpga1 6.00 0.0 0.0FPGA swv6.0 hwv0.80 lc fpga1 6.00 0.0 0.80------------------------------------------------------------------------------------------2-10GE-WL-FLEX FPGA swv6.0 lc fpga1 6.00 0.0 0.0FPGA swv6.0 hwv0.80 lc fpga1 6.00 0.0 0.80------------------------------------------------------------------------------------------CRS-16-ALARM-C FPGA 6.04 spb lc fpga1 6.04 0.0 0.0ROMMONA swv2.05 sp lc rommonA 2.05 2.1 0.0ROMMONA swv2.05 spb lc rommonA 2.05 2.5 0.0ROMMONB swv2.05 sp lc rommon 2.05 2.5 0.0ROMMONB swv2.05 spb lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------CRS-16-ALARM-B FPGA 6.04 spb lc fpga1 6.04 0.0 0.0ROMMONA swv2.05 spb lc rommonA 2.05 2.5 0.0ROMMONB swv2.05 spb lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------CRS-16-FAN-CT FPGA 6.04 spb lc fpga1 6.04 0.0 0.0ROMMONA swv2.05 spb lc rommonA 2.05 2.5 0.0ROMMONB swv2.05 spb lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------CRS-16-LCC-F-CT-B FPGA 6.04 spb lc fpga1 6.04 0.0 0.0ROMMONA swv2.05 spb lc rommonA 2.05 2.5 0.0ROMMONB swv2.05 spb lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------CRS-FCC-LED FPGA 6.04 spb lc fpga1 6.04 0.0 0.0ROMMONA swv2.05 sp lc rommonA 2.05 2.1 0.0ROMMONA swv2.05 spb lc rommonA 2.05 2.5 0.0ROMMONB swv2.05 sp lc rommon 2.05 2.5 0.0ROMMONB swv2.05 spb lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------Route Processor ROMMONA swv2.05 asmp lc rommonA 2.05 2.1 0.0ROMMONA swv2.05 dsmp lc rommonA 2.05 2.1 0.0ROMMONB swv2.05 asmp lc rommon 2.05 2.5 0.0ROMMONB swv2.05 dsmp lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------SC ROMMONA swv2.05 asmp lc rommonA 2.05 2.1 0.0ROMMONA swv2.05 dsmp lc rommonA 2.05 2.1 0.0ROMMONB swv2.05 asmp lc rommon 2.05 2.5 0.0ROMMONB swv2.05 dsmp lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------RP ROMMONA swv2.05 asmp lc rommonA 2.05 2.1 0.0ROMMONA swv2.05 dsmp lc rommonA 2.05 2.1 0.0ROMMONB swv2.05 asmp lc rommon 2.05 2.5 0.0ROMMONB swv2.05 dsmp lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------Shelf Controller GE ROMMONA swv2.05 asmp lc rommonA 2.05 2.1 0.0ROMMONA swv2.05 dsmp lc rommonA 2.05 2.1 0.0ROMMONB swv2.05 asmp lc rommon 2.05 2.5 0.0ROMMONB swv2.05 dsmp lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------RP ROMMONA swv2.05 asmp lc rommonA 2.05 2.1 0.0ROMMONA swv2.05 dsmp lc rommonA 2.05 2.1 0.0ROMMONB swv2.05 asmp lc rommon 2.05 2.5 0.0ROMMONB swv2.05 dsmp lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------Shelf Controller GE2 ROMMONA swv2.05 asmp lc rommonA 2.05 2.1 0.0ROMMONA swv2.05 dsmp lc rommonA 2.05 2.1 0.0ROMMONB swv2.05 asmp lc rommon 2.05 2.5 0.0ROMMONB swv2.05 dsmp lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------DRP ROMMONA swv2.05 asmp lc rommonA 2.05 2.1 0.0ROMMONA swv2.05 dsmp lc rommonA 2.05 2.1 0.0ROMMONA swv2.05 sp lc rommonA 2.05 2.1 0.0ROMMONB swv2.05 asmp lc rommon 2.05 2.5 0.0ROMMONB swv2.05 dsmp lc rommon 2.05 2.5 0.0ROMMONB swv2.05 sp lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------S1S2S3 ROMMONA swv2.05 sp lc rommonA 2.05 2.1 0.0ROMMONB swv2.05 sp lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------S1S3 ROMMONA swv2.05 sp lc rommonA 2.05 2.1 0.0ROMMONB swv2.05 sp lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------S2 ROMMONA swv2.05 sp lc rommonA 2.05 2.1 0.0ROMMONB swv2.05 sp lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------Fabric HS123 ROMMONA swv2.05 sp lc rommonA 2.05 2.1 0.0ROMMONB swv2.05 sp lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------Fabric QQS123 ROMMONA swv2.05 sp lc rommonA 2.05 2.1 0.0ROMMONB swv2.05 sp lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------LED ROMMONA swv2.05 sp lc rommonA 2.05 2.1 0.0ROMMONB swv2.05 sp lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------40G-MSC ROMMONA swv2.05 asmp lc rommonA 2.05 2.1 0.0ROMMONA swv2.05 dsmp lc rommonA 2.05 2.1 0.0ROMMONA swv2.05 sp lc rommonA 2.05 2.1 0.0ROMMONB swv2.05 asmp lc rommon 2.05 2.5 0.0ROMMONB swv2.05 dsmp lc rommon 2.05 2.5 0.0ROMMONB swv2.05 sp lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------CRS-16-ALARM ROMMONA swv2.05 sp lc rommonA 2.05 2.1 0.0ROMMONB swv2.05 sp lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------CRS-16-LCC-FAN-CT ROMMONA swv2.05 sp lc rommonA 2.05 2.1 0.0ROMMONB swv2.05 sp lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------FC Fan Controller ROMMONA swv2.05 sp lc rommonA 2.05 2.1 0.0ROMMONB swv2.05 sp lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------SPA-4XT3/E3 SPA E3 Subrate FPGA spa fpga2 1.04 0.0 0.0SPA T3 Subrate FPGA spa fpga3 1.04 0.0 0.0SPA I/O FPGA spa fpga1 1.00 0.0 0.0SPA ROMMON spa rommon 2.12 0.0 0.0------------------------------------------------------------------------------------------SPA-2XT3/E3 SPA E3 Subrate FPGA spa fpga2 1.04 0.0 0.0SPA T3 Subrate FPGA spa fpga3 1.04 0.0 0.0SPA I/O FPGA spa fpga1 1.00 0.0 0.0SPA ROMMON spa rommon 2.12 0.0 0.0------------------------------------------------------------------------------------------SPA-1XCHOC48/DS3 SPA I/O FPGA spa fpga2 1.00 0.0 0.49SPA I/O FPGA spa fpga3 1.00 0.0 0.52SPA I/O FPGA spa fpga1 1.36 0.0 0.49SPA ROMMON spa rommon 2.02 0.0 0.49------------------------------------------------------------------------------------------SPA-1XCHOC12/DS0 SPA I/O FPGA spa fpga2 1.00 0.0 0.49SPA I/O FPGA spa fpga1 1.36 0.0 0.49SPA ROMMON spa rommon 2.02 0.0 0.49------------------------------------------------------------------------------------------SPA-OC192POS SPA FPGA swv1.3 spa fpga1 1.03 0.0 0.0------------------------------------------------------------------------------------------SPA-8XOC12-POS SPA FPGA swv1.0 spa fpga1 1.00 0.0 0.5------------------------------------------------------------------------------------------SPA-4XOC3-POS SPA FPGA swv3.4 spa fpga1 3.04 0.0 0.0------------------------------------------------------------------------------------------SPA-OC192POS-XFP SPA FPGA swv1.2 spa fpga1 1.02 0.0 0.0------------------------------------------------------------------------------------------SPA-8X1GE SPA FPGA swv1.8 spa fpga1 1.08 0.0 0.0------------------------------------------------------------------------------------------SPA-2XOC48POS/RPR SPA FPGA swv1.0 spa fpga1 1.00 0.0 0.0------------------------------------------------------------------------------------------SPA-4XOC48POS/RPR SPA FPGA swv1.0 spa fpga1 1.00 0.0 0.0------------------------------------------------------------------------------------------SPA-1XOC48POS/RPR SPA FPGA swv1.2 spa fpga1 1.02 0.0 0.0------------------------------------------------------------------------------------------SPA-8XOC3-POS SPA FPGA swv1.0 spa fpga1 1.00 0.0 0.5SPA FPGA swv1.0 spa fpga1 1.00 0.0 0.5------------------------------------------------------------------------------------------SPA-2XOC12-POS SPA FPGA swv1.0 spa fpga1 1.00 0.0 0.5------------------------------------------------------------------------------------------SPA-4XOC12-POS SPA FPGA swv1.0 spa fpga1 1.00 0.0 0.5------------------------------------------------------------------------------------------SPA-10X1GE-V2 SPA FPGA swv1.10 spa fpga1 1.10 0.0 0.0------------------------------------------------------------------------------------------SPA-8X1GE-V2 SPA FPGA swv1.10 spa fpga1 1.10 0.0 0.0------------------------------------------------------------------------------------------SPA-5X1GE-V2 SPA FPGA swv1.10 spa fpga1 1.10 0.0 0.0------------------------------------------------------------------------------------------SPA-1X10GE-L-V2 SPA FPGA swv1.11 spa fpga1 1.11 0.0 0.0------------------------------------------------------------------------------------------SPA-4XOC3-POS-V2 SPA FPGA swv1.0 spa fpga1 1.00 0.0 0.5------------------------------------------------------------------------------------------SPA-1X10GE-WL-V2 SPA FPGA swv1.11 spa fpga1 1.11 0.0 0.0------------------------------------------------------------------------------------------SPA-1XOC3-ATM-V2 SPA FPGA swv1.2 spa fpga1 2.02 0.0 0.0------------------------------------------------------------------------------------------SPA-2XOC3-ATM-V2 SPA FPGA swv1.2 spa fpga1 2.02 0.0 0.0------------------------------------------------------------------------------------------SPA-3XOC3-ATM-V2 SPA FPGA swv1.2 spa fpga1 2.02 0.0 0.0------------------------------------------------------------------------------------------SPA-1XOC12-ATM-V2 SPA FPGA swv1.2 spa fpga1 2.02 0.0 0.0------------------------------------------------------------------------------------------RP/0/RP0/CPU0:router(admin)#$Cisco CRS-3 show fpd package Output
RP/0/RP0/CPU0:router(admin)#show fpd package
=============================== ================================================Field Programmable Device Package================================================SW Min Req Min ReqCard Type FPD Description Type Subtype Version SW Ver HW Vers==================== ========================== ==== ======= =========== ======== ========PRP FPGA ZJF uBlaze lc fpga2 0.01 0.0 0.0S-8 FPGA Nirvana lc fpga3 13.00 0.0 0.0FPGA BCM 8727 lc fpga4 0.01 0.0 0.0FPGA MCU lc fpga5 0.01 0.0 0.0S-8 FPGA UTI lc fpga6 4.09 0.0 0.0FPGA CPU ZJF lc fpga1 7.00 0.0 0.0ROMMONA swv2.05 x86mp lc rommonA 2.05 2.3 0.0ROMMONB swv2.05 x86mp lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------PRP FPGA ZJF uBlaze lc fpga2 0.01 0.0 0.0S-16 FPGA Nirvana lc fpga3 13.00 0.0 0.0FPGA BCM 8727 lc fpga4 0.01 0.0 0.0FPGA MCU lc fpga5 0.01 0.0 0.0ZJF FPGA CPU lc fpga1 7.00 0.0 0.0ROMMONA swv2.05 x86mp lc rommonA 2.05 2.3 0.0ROMMONB swv2.05 x86mp lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------S2 FPGA 4.02 lc fpga2 4.02 0.0 0.0FPGA 5.00 lc fpga3 5.00 0.0 0.0FPGA 6.04 spb lc fpga1 6.04 0.0 0.0ROMMONA swv2.05 spb lc rommonA 2.05 2.5 0.0ROMMONB swv2.05 spb lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------140G-S1S2S3 FPGA 4.01 lc fpga2 4.01 0.0 0.0FPGA 6.04 spb lc fpga1 6.04 0.0 0.0ROMMONA swv2.05 spb lc rommonA 2.05 2.5 0.0ROMMONB swv2.05 spb lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------Fabric HS123 Superst FPGA 4.00 lc fpga2 4.00 0.0 0.0FPGA 6.04 spb lc fpga1 6.04 0.0 0.0ROMMONA swv2.05 spb lc rommonA 2.05 2.5 0.0ROMMONB swv2.05 spb lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------140G-4-S1S2S3 FPGA 4.01 lc fpga2 4.01 0.0 0.0FPGA 6.04 spb lc fpga1 6.04 0.0 0.0ROMMONA swv2.05 spb lc rommonA 2.05 2.5 0.0ROMMONB swv2.05 spb lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------140G-S1S3 FPGA 4.01 lc fpga2 4.01 0.0 0.0FPGA 6.04 spb lc fpga1 6.04 0.0 0.0ROMMONA swv2.05 spb lc rommonA 2.05 2.5 0.0ROMMONB swv2.05 spb lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------140G-S1S2S3-2 FPGA 4.01 lc fpga2 4.01 0.0 0.0FPGA 6.04 spb lc fpga1 6.04 0.0 0.0ROMMONA swv2.05 spb lc rommonA 2.05 2.5 0.0ROMMONB swv2.05 spb lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------140G-S1S3-2 FPGA 4.01 lc fpga2 4.01 0.0 0.0FPGA 6.04 spb lc fpga1 6.04 0.0 0.0ROMMONA swv2.05 spb lc rommonA 2.05 2.5 0.0ROMMONB swv2.05 spb lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------140G-S2-2 FPGA 4.02 lc fpga2 4.02 0.0 0.0FPGA 16.00 lc fpga3 16.00 0.0 0.0FPGA 6.04 spb lc fpga1 6.04 0.0 0.0ROMMONA swv2.05 spb lc rommonA 2.05 2.5 0.0ROMMONB swv2.05 spb lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------140G-MSC FPGA Linecard 0.36 lc fpga2 0.36 0.0 0.0FPGA CPU 0.8 lc fpga1 0.08 0.0 0.0ROMMONA swv2.05 kensho lc rommonA 2.05 2.4 0.0ROMMONB swv2.05 kensho lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------FP-140G FPGA Linecard 0.36 lc fpga2 0.36 0.0 0.0FPGA CPU 0.8 lc fpga1 0.08 0.0 0.0ROMMONA swv2.05 kensho lc rommonA 2.05 2.4 0.0ROMMONB swv2.05 kensho lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------CRS-LSP FPGA Linecard 0.36 lc fpga2 0.36 0.0 0.0FPGA CPU 0.8 lc fpga1 0.08 0.0 0.0ROMMONA swv2.05 kensho lc rommonA 2.05 2.4 0.0ROMMONB swv2.05 kensho lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------1OC768-ITU/C OPTICS FIRMWARE 110B10 lc fpga2 110.10 0.0 0.0------------------------------------------------------------------------------------------1OC768-DWDM-L OPTICS FIRMWARE 110B10 lc fpga2 110.10 0.0 0.0------------------------------------------------------------------------------------------1OC768-DPSK/C OPTICS FIRMWARE 110B14 lc fpga2 110.14 0.0 0.0------------------------------------------------------------------------------------------1OC768-DPSK/C-O OPTICS FIRMWARE 110B14 lc fpga2 110.14 0.0 0.0------------------------------------------------------------------------------------------1OC768-DPSK/C-E OPTICS FIRMWARE 110B14 lc fpga2 110.14 0.0 0.0------------------------------------------------------------------------------------------CRS-CGSE-PLIM FPGA mCPU0 0.559 lc fpga2 0.559 0.0 0.0FPGA sCPU0 0.559 lc fpga3 0.559 0.0 0.0FPGA mCPU1 0.559 lc fpga4 0.559 0.0 0.0FPGA sCPU1 0.559 lc fpga5 0.559 0.0 0.0FPGA PLIM_SVC 0.41014 lc fpga1 0.41014 0.0 0.0------------------------------------------------------------------------------------------20-10GBE PLIM FPGA 42.0 lc fpga3 42.00 0.0 0.0------------------------------------------------------------------------------------------12-10GBE PLIM FPGA 42.0 lc fpga3 42.00 0.0 0.0------------------------------------------------------------------------------------------1-100GBE PLIM FPGA 19.0 lc fpga3 19.00 0.0 0.0RX MAC FPGA 49.0 lc fpga4 49.00 0.0 0.0TX MAC FPGA 34.0 lc fpga5 34.00 0.0 0.0------------------------------------------------------------------------------------------14-10GBE PLIM FPGA 42.0 lc fpga3 42.00 0.0 0.0------------------------------------------------------------------------------------------DRP_B FPGA 6.04 spb lc fpga1 6.04 0.0 0.0ROMMONA swv2.05 asmp lc rommonA 2.05 2.1 0.0ROMMONA swv2.05 dsmp lc rommonA 2.05 2.1 0.0ROMMONA swv2.05 sp lc rommonA 2.05 2.1 0.0ROMMONA swv2.05 spb lc rommonA 2.05 2.5 0.0ROMMONB swv2.05 asmp lc rommon 2.05 2.5 0.0ROMMONB swv2.05 dsmp lc rommon 2.05 2.5 0.0ROMMONB swv2.05 sp lc rommon 2.05 2.5 0.0ROMMONB swv2.05 spb lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------MSC_B FPGA 6.04 spb lc fpga1 6.04 0.0 0.0ROMMONA swv2.05 asmp lc rommonA 2.05 2.1 0.0ROMMONA swv2.05 dsmp lc rommonA 2.05 2.1 0.0ROMMONA swv2.05 sp lc rommonA 2.05 2.1 0.0ROMMONA swv2.05 spb lc rommonA 2.05 2.5 0.0ROMMONB swv2.05 asmp lc rommon 2.05 2.5 0.0ROMMONB swv2.05 dsmp lc rommon 2.05 2.5 0.0ROMMONB swv2.05 sp lc rommon 2.05 2.5 0.0ROMMONB swv2.05 spb lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------FP40 FPGA 6.04 spb lc fpga1 6.04 0.0 0.0ROMMONA swv2.05 asmp lc rommonA 2.05 2.1 0.0ROMMONA swv2.05 dsmp lc rommonA 2.05 2.1 0.0ROMMONA swv2.05 sp lc rommonA 2.05 2.1 0.0ROMMONA swv2.05 spb lc rommonA 2.05 2.5 0.0ROMMONB swv2.05 asmp lc rommon 2.05 2.5 0.0ROMMONB swv2.05 dsmp lc rommon 2.05 2.5 0.0ROMMONB swv2.05 sp lc rommon 2.05 2.5 0.0ROMMONB swv2.05 spb lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------CRS1-SIP-800 JACKET FPGA swv6.0 lc fpga1 6.00 5.0 0.0FPGA swv6.0 hwv80 lc fpga1 6.00 5.0 0.80------------------------------------------------------------------------------------------8-10GBE FPGA swvA.0 lc fpga1 10.00 0.0 0.0------------------------------------------------------------------------------------------OC48-POS-16-ED FPGA PLIM_OC48 9.0 lc fpga1 9.00 0.0 0.0------------------------------------------------------------------------------------------4-10GBE FPGA sw_4p_v15.0 lc fpga1 15.00 0.0 0.0------------------------------------------------------------------------------------------8-10GBE FPGA sw_8p_v15.0 lc fpga1 15.00 0.0 0.0------------------------------------------------------------------------------------------4-10GE SQUIRREL FPGA 10.0 lc fpga1 10.00 0.0 0.0------------------------------------------------------------------------------------------42-1GE FPGA swv6.0 lc fpga1 6.00 0.0 0.0FPGA swv6.0 hwv0.80 lc fpga1 6.00 0.0 0.80------------------------------------------------------------------------------------------20-1GE-FLEX FPGA swv6.0 lc fpga1 6.00 0.0 0.0FPGA swv6.0 hwv0.80 lc fpga1 6.00 0.0 0.80------------------------------------------------------------------------------------------2-10GE-WL-FLEX FPGA swv6.0 lc fpga1 6.00 0.0 0.0FPGA swv6.0 hwv0.80 lc fpga1 6.00 0.0 0.80------------------------------------------------------------------------------------------CRS-16-ALARM-C FPGA 6.04 spb lc fpga1 6.04 0.0 0.0ROMMONA swv2.05 sp lc rommonA 2.05 2.1 0.0ROMMONA swv2.05 spb lc rommonA 2.05 2.5 0.0ROMMONB swv2.05 sp lc rommon 2.05 2.5 0.0ROMMONB swv2.05 spb lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------CRS-16-ALARM-B FPGA 6.04 spb lc fpga1 6.04 0.0 0.0ROMMONA swv2.05 spb lc rommonA 2.05 2.5 0.0ROMMONB swv2.05 spb lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------CRS-16-FAN-CT FPGA 6.04 spb lc fpga1 6.04 0.0 0.0ROMMONA swv2.05 spb lc rommonA 2.05 2.5 0.0ROMMONB swv2.05 spb lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------CRS-16-LCC-F-CT-B FPGA 6.04 spb lc fpga1 6.04 0.0 0.0ROMMONA swv2.05 spb lc rommonA 2.05 2.5 0.0ROMMONB swv2.05 spb lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------CRS-FCC-LED FPGA 6.04 spb lc fpga1 6.04 0.0 0.0ROMMONA swv2.05 sp lc rommonA 2.05 2.1 0.0ROMMONA swv2.05 spb lc rommonA 2.05 2.5 0.0ROMMONB swv2.05 sp lc rommon 2.05 2.5 0.0ROMMONB swv2.05 spb lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------Route Processor ROMMONA swv2.05 asmp lc rommonA 2.05 2.1 0.0ROMMONA swv2.05 dsmp lc rommonA 2.05 2.1 0.0ROMMONB swv2.05 asmp lc rommon 2.05 2.5 0.0ROMMONB swv2.05 dsmp lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------SC ROMMONA swv2.05 asmp lc rommonA 2.05 2.1 0.0ROMMONA swv2.05 dsmp lc rommonA 2.05 2.1 0.0ROMMONB swv2.05 asmp lc rommon 2.05 2.5 0.0ROMMONB swv2.05 dsmp lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------RP ROMMONA swv2.05 asmp lc rommonA 2.05 2.1 0.0ROMMONA swv2.05 dsmp lc rommonA 2.05 2.1 0.0ROMMONB swv2.05 asmp lc rommon 2.05 2.5 0.0ROMMONB swv2.05 dsmp lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------Shelf Controller GE ROMMONA swv2.05 asmp lc rommonA 2.05 2.1 0.0ROMMONA swv2.05 dsmp lc rommonA 2.05 2.1 0.0ROMMONB swv2.05 asmp lc rommon 2.05 2.5 0.0ROMMONB swv2.05 dsmp lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------RP ROMMONA swv2.05 asmp lc rommonA 2.05 2.1 0.0ROMMONA swv2.05 dsmp lc rommonA 2.05 2.1 0.0ROMMONB swv2.05 asmp lc rommon 2.05 2.5 0.0ROMMONB swv2.05 dsmp lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------Shelf Controller GE2 ROMMONA swv2.05 asmp lc rommonA 2.05 2.1 0.0ROMMONA swv2.05 dsmp lc rommonA 2.05 2.1 0.0ROMMONB swv2.05 asmp lc rommon 2.05 2.5 0.0ROMMONB swv2.05 dsmp lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------DRP ROMMONA swv2.05 asmp lc rommonA 2.05 2.1 0.0ROMMONA swv2.05 dsmp lc rommonA 2.05 2.1 0.0ROMMONA swv2.05 sp lc rommonA 2.05 2.1 0.0ROMMONB swv2.05 asmp lc rommon 2.05 2.5 0.0ROMMONB swv2.05 dsmp lc rommon 2.05 2.5 0.0ROMMONB swv2.05 sp lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------S1S2S3 ROMMONA swv2.05 sp lc rommonA 2.05 2.1 0.0ROMMONB swv2.05 sp lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------S1S3 ROMMONA swv2.05 sp lc rommonA 2.05 2.1 0.0ROMMONB swv2.05 sp lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------S2 ROMMONA swv2.05 sp lc rommonA 2.05 2.1 0.0ROMMONB swv2.05 sp lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------Fabric HS123 ROMMONA swv2.05 sp lc rommonA 2.05 2.1 0.0ROMMONB swv2.05 sp lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------Fabric QQS123 ROMMONA swv2.05 sp lc rommonA 2.05 2.1 0.0ROMMONB swv2.05 sp lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------LED ROMMONA swv2.05 sp lc rommonA 2.05 2.1 0.0ROMMONB swv2.05 sp lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------40G-MSC ROMMONA swv2.05 asmp lc rommonA 2.05 2.1 0.0ROMMONA swv2.05 dsmp lc rommonA 2.05 2.1 0.0ROMMONA swv2.05 sp lc rommonA 2.05 2.1 0.0ROMMONB swv2.05 asmp lc rommon 2.05 2.5 0.0ROMMONB swv2.05 dsmp lc rommon 2.05 2.5 0.0ROMMONB swv2.05 sp lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------CRS-16-ALARM ROMMONA swv2.05 sp lc rommonA 2.05 2.1 0.0ROMMONB swv2.05 sp lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------CRS-16-LCC-FAN-CT ROMMONA swv2.05 sp lc rommonA 2.05 2.1 0.0ROMMONB swv2.05 sp lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------FC Fan Controller ROMMONA swv2.05 sp lc rommonA 2.05 2.1 0.0ROMMONB swv2.05 sp lc rommon 2.05 2.5 0.0------------------------------------------------------------------------------------------SPA-4XT3/E3 SPA E3 Subrate FPGA spa fpga2 1.04 0.0 0.0SPA T3 Subrate FPGA spa fpga3 1.04 0.0 0.0SPA I/O FPGA spa fpga1 1.00 0.0 0.0SPA ROMMON spa rommon 2.12 0.0 0.0------------------------------------------------------------------------------------------SPA-2XT3/E3 SPA E3 Subrate FPGA spa fpga2 1.04 0.0 0.0SPA T3 Subrate FPGA spa fpga3 1.04 0.0 0.0SPA I/O FPGA spa fpga1 1.00 0.0 0.0SPA ROMMON spa rommon 2.12 0.0 0.0------------------------------------------------------------------------------------------SPA-1XCHOC48/DS3 SPA I/O FPGA spa fpga2 1.00 0.0 0.49SPA I/O FPGA spa fpga3 1.00 0.0 0.52SPA I/O FPGA spa fpga1 1.36 0.0 0.49SPA ROMMON spa rommon 2.02 0.0 0.49------------------------------------------------------------------------------------------SPA-1XCHOC12/DS0 SPA I/O FPGA spa fpga2 1.00 0.0 0.49SPA I/O FPGA spa fpga1 1.36 0.0 0.49SPA ROMMON spa rommon 2.02 0.0 0.49------------------------------------------------------------------------------------------SPA-OC192POS SPA FPGA swv1.3 spa fpga1 1.03 0.0 0.0------------------------------------------------------------------------------------------SPA-8XOC12-POS SPA FPGA swv1.0 spa fpga1 1.00 0.0 0.5------------------------------------------------------------------------------------------SPA-4XOC3-POS SPA FPGA swv3.4 spa fpga1 3.04 0.0 0.0------------------------------------------------------------------------------------------SPA-OC192POS-XFP SPA FPGA swv1.2 spa fpga1 1.02 0.0 0.0------------------------------------------------------------------------------------------SPA-8X1GE SPA FPGA swv1.8 spa fpga1 1.08 0.0 0.0------------------------------------------------------------------------------------------SPA-2XOC48POS/RPR SPA FPGA swv1.0 spa fpga1 1.00 0.0 0.0------------------------------------------------------------------------------------------SPA-4XOC48POS/RPR SPA FPGA swv1.0 spa fpga1 1.00 0.0 0.0------------------------------------------------------------------------------------------SPA-1XOC48POS/RPR SPA FPGA swv1.2 spa fpga1 1.02 0.0 0.0------------------------------------------------------------------------------------------SPA-8XOC3-POS SPA FPGA swv1.0 spa fpga1 1.00 0.0 0.5SPA FPGA swv1.0 spa fpga1 1.00 0.0 0.5------------------------------------------------------------------------------------------SPA-2XOC12-POS SPA FPGA swv1.0 spa fpga1 1.00 0.0 0.5------------------------------------------------------------------------------------------SPA-4XOC12-POS SPA FPGA swv1.0 spa fpga1 1.00 0.0 0.5------------------------------------------------------------------------------------------SPA-10X1GE-V2 SPA FPGA swv1.10 spa fpga1 1.10 0.0 0.0------------------------------------------------------------------------------------------SPA-8X1GE-V2 SPA FPGA swv1.10 spa fpga1 1.10 0.0 0.0------------------------------------------------------------------------------------------SPA-5X1GE-V2 SPA FPGA swv1.10 spa fpga1 1.10 0.0 0.0------------------------------------------------------------------------------------------SPA-1X10GE-L-V2 SPA FPGA swv1.11 spa fpga1 1.11 0.0 0.0------------------------------------------------------------------------------------------SPA-4XOC3-POS-V2 SPA FPGA swv1.0 spa fpga1 1.00 0.0 0.5------------------------------------------------------------------------------------------SPA-1X10GE-WL-V2 SPA FPGA swv1.11 spa fpga1 1.11 0.0 0.0------------------------------------------------------------------------------------------SPA-1XOC3-ATM-V2 SPA FPGA swv1.2 spa fpga1 2.02 0.0 0.0------------------------------------------------------------------------------------------SPA-2XOC3-ATM-V2 SPA FPGA swv1.2 spa fpga1 2.02 0.0 0.0------------------------------------------------------------------------------------------SPA-3XOC3-ATM-V2 SPA FPGA swv1.2 spa fpga1 2.02 0.0 0.0------------------------------------------------------------------------------------------SPA-1XOC12-ATM-V2 SPA FPGA swv1.2 spa fpga1 2.02 0.0 0.0------------------------------------------------------------------------------------------RP/0/RP0/CPU0:router(admin)#$Minimum Firmware Requirement
•
After completing an RMA remember to upgrade the firmware as per this matrix:
http://www.cisco.com/web/Cisco_IOS_XR_Software/pdf/SoftwareFirmwareCompatibilityMatrix.pdf
•
Links to PDF copies of the IOS XR Firmware Upgrade Guides are available here:
http://www.cisco.com/web/Cisco_IOS_XR_Software/index.html
Here's the link to the Cisco Systems IOS XR Firmware Upgrade Guide for Cisco CRS-1 router and Cisco XR12000 router:
http://www.cisco.com/web/Cisco_IOS_XR_Software/pdf/IOSXRFirmwareUpgradeGuide.pdf
•
Refer to the Hardware Redundancy and Node Administration Commands on Cisco IOS XR Software chapter of the Cisco IOS XR System Management Command Reference for the Cisco CRS router for the upgrade CLI:
http://www.cisco.com/en/US/docs/routers/crs/software/crs_r4.0/system_management/command/reference/yr40crs_chapter8.html
Determining Your Software Version
To determine the version of Cisco IOS XR Software running on your router, log into the router and enter the show version command:
Cisco CRS-1 show version Output
Step 1
Establish a Telnet session with the router.
Step 2
Enter the show version command from EXEC mode.
RP/0/RP0/CPU0:router(admin)#show version
Wed Nov 23 10:53:11.713 PSTCisco IOS XR Software, Version 4.1.2[Default]Copyright (c) 2011 by Cisco Systems, Inc.ROM: System Bootstrap, Version 2.05(20110622:200433) [CRS ROMMON],PE3 uptime is 1 day, 16 hours, 7 minutesSystem image file is "bootflash:disk1/hfr-os-mbi-4.1.2/mbihfr-rp.vm"cisco CRS-4/S (7457) processor with 4194304K bytes of memory.7457 processor at 1197Mhz, Revision 1.1UNKNOWN RACK2 Management Ethernet1 WANPHY controller(s)10 GigabitEthernet4 SONET/SDH4 Packet over SONET/SDH1 TenGigE1019k bytes of non-volatile configuration memory.38079M bytes of hard disk.14119040k bytes of disk0: (Sector size 512 bytes).14119040k bytes of disk1: (Sector size 512 bytes).Boot device on node 0/0/SP is bootflash:Package active on node 0/0/SP:iosxr-infra, V 4.1.2[00], Cisco Systems, at disk0:iosxr-infra-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-diags, V 4.1.2[00], Cisco Systems, at disk0:iosxr-diags-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fpd, V 4.1.2[00], Cisco Systems, at disk0:hfr-fpd-4.1.2Built on Sat Nov 19 23:49:36 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-diags-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.2Built on Sat Nov 19 23:49:00 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-base, V 4.1.2[00], Cisco Systems, at disk0:hfr-base-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-os-mbi, V 4.1.2[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.2Built on Sat Nov 19 23:32:57 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieBoot device on node 0/0/CPU0 is mem:Package active on node 0/0/CPU0:iosxr-ce, V 4.1.2[00], Cisco Systems, at disk0:iosxr-ce-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-ce, V 4.1.2[00], Cisco Systems, at disk0:hfr-ce-4.1.2Built on Sat Nov 19 23:31:17 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-service-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-service-supp-4.1.2Built on Sat Nov 19 23:48:37 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-service, V 4.1.2[00], Cisco Systems, at disk0:iosxr-service-4.1.2Built on Sat Nov 19 23:48:37 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-mpls, V 4.1.2[00], Cisco Systems, at disk0:iosxr-mpls-4.1.2Built on Sat Nov 19 23:33:48 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-mcast, V 4.1.2[00], Cisco Systems, at disk0:iosxr-mcast-4.1.2Built on Sat Nov 19 23:33:20 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-routing, V 4.1.2[00], Cisco Systems, at disk0:iosxr-routing-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-infra, V 4.1.2[00], Cisco Systems, at disk0:iosxr-infra-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fwding, V 4.1.2[00], Cisco Systems, at disk0:hfr-fwding-4.1.2Built on Sat Nov 19 23:31:17 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-fwding, V 4.1.2[00], Cisco Systems, at disk0:iosxr-fwding-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-diags, V 4.1.2[00], Cisco Systems, at disk0:iosxr-diags-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fpd, V 4.1.2[00], Cisco Systems, at disk0:hfr-fpd-4.1.2Built on Sat Nov 19 23:49:36 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-diags-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.2Built on Sat Nov 19 23:49:00 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-mcast-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-mcast-supp-4.1.2Built on Sat Nov 19 23:33:20 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-base, V 4.1.2[00], Cisco Systems, at disk0:hfr-base-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-os-mbi, V 4.1.2[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.2Built on Sat Nov 19 23:32:57 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieConfiguration register on node 0/RP0/CPU0 is 0x102Boot device on node 0/RP0/CPU0 is disk1:Package active on node 0/RP0/CPU0:iosxr-ce, V 4.1.2[00], Cisco Systems, at disk0:iosxr-ce-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-doc-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-doc-supp-4.1.2Built on Sat Nov 19 23:49:27 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-ce, V 4.1.2[00], Cisco Systems, at disk0:hfr-ce-4.1.2Built on Sat Nov 19 23:31:17 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-service-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-service-supp-4.1.2Built on Sat Nov 19 23:48:37 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-service, V 4.1.2[00], Cisco Systems, at disk0:iosxr-service-4.1.2Built on Sat Nov 19 23:48:37 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-security, V 4.1.2[00], Cisco Systems, at disk0:iosxr-security-4.1.2Built on Sat Nov 19 23:48:27 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-mpls, V 4.1.2[00], Cisco Systems, at disk0:iosxr-mpls-4.1.2Built on Sat Nov 19 23:33:48 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-mgbl, V 4.1.2[00], Cisco Systems, at disk0:iosxr-mgbl-4.1.2Built on Sat Nov 19 23:33:39 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-mcast, V 4.1.2[00], Cisco Systems, at disk0:iosxr-mcast-4.1.2Built on Sat Nov 19 23:33:20 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-routing, V 4.1.2[00], Cisco Systems, at disk0:iosxr-routing-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-infra, V 4.1.2[00], Cisco Systems, at disk0:iosxr-infra-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fwding, V 4.1.2[00], Cisco Systems, at disk0:hfr-fwding-4.1.2Built on Sat Nov 19 23:31:17 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-fwding, V 4.1.2[00], Cisco Systems, at disk0:iosxr-fwding-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-diags, V 4.1.2[00], Cisco Systems, at disk0:iosxr-diags-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fpd, V 4.1.2[00], Cisco Systems, at disk0:hfr-fpd-4.1.2Built on Sat Nov 19 23:49:36 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-diags-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.2Built on Sat Nov 19 23:49:00 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-k9sec-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-k9sec-supp-4.1.2Built on Sat Nov 19 23:48:27 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-mgbl-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-mgbl-supp-4.1.2Built on Sat Nov 19 23:33:39 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-mcast-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-mcast-supp-4.1.2Built on Sat Nov 19 23:33:20 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-base, V 4.1.2[00], Cisco Systems, at disk0:hfr-base-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-os-mbi, V 4.1.2[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.2Built on Sat Nov 19 23:32:57 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieConfiguration register on node 0/RP1/CPU0 is 0x102Boot device on node 0/RP1/CPU0 is disk0:Package active on node 0/RP1/CPU0:iosxr-ce, V 4.1.2[00], Cisco Systems, at disk0:iosxr-ce-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-doc-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-doc-supp-4.1.2Built on Sat Nov 19 23:49:27 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-ce, V 4.1.2[00], Cisco Systems, at disk0:hfr-ce-4.1.2Built on Sat Nov 19 23:31:17 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-service-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-service-supp-4.1.2Built on Sat Nov 19 23:48:37 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-service, V 4.1.2[00], Cisco Systems, at disk0:iosxr-service-4.1.2Built on Sat Nov 19 23:48:37 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-security, V 4.1.2[00], Cisco Systems, at disk0:iosxr-security-4.1.2Built on Sat Nov 19 23:48:27 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-mpls, V 4.1.2[00], Cisco Systems, at disk0:iosxr-mpls-4.1.2Built on Sat Nov 19 23:33:48 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-mgbl, V 4.1.2[00], Cisco Systems, at disk0:iosxr-mgbl-4.1.2Built on Sat Nov 19 23:33:39 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-mcast, V 4.1.2[00], Cisco Systems, at disk0:iosxr-mcast-4.1.2Built on Sat Nov 19 23:33:20 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-routing, V 4.1.2[00], Cisco Systems, at disk0:iosxr-routing-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-infra, V 4.1.2[00], Cisco Systems, at disk0:iosxr-infra-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fwding, V 4.1.2[00], Cisco Systems, at disk0:hfr-fwding-4.1.2Built on Sat Nov 19 23:31:17 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-fwding, V 4.1.2[00], Cisco Systems, at disk0:iosxr-fwding-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-diags, V 4.1.2[00], Cisco Systems, at disk0:iosxr-diags-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fpd, V 4.1.2[00], Cisco Systems, at disk0:hfr-fpd-4.1.2Built on Sat Nov 19 23:49:36 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-diags-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.2Built on Sat Nov 19 23:49:00 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-k9sec-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-k9sec-supp-4.1.2Built on Sat Nov 19 23:48:27 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-mgbl-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-mgbl-supp-4.1.2Built on Sat Nov 19 23:33:39 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-mcast-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-mcast-supp-4.1.2Built on Sat Nov 19 23:33:20 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-base, V 4.1.2[00], Cisco Systems, at disk0:hfr-base-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-os-mbi, V 4.1.2[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.2Built on Sat Nov 19 23:32:57 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieBoot device on node 0/SM0/SP is bootflash:Package active on node 0/SM0/SP:iosxr-infra, V 4.1.2[00], Cisco Systems, at disk0:iosxr-infra-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-diags, V 4.1.2[00], Cisco Systems, at disk0:iosxr-diags-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fpd, V 4.1.2[00], Cisco Systems, at disk0:hfr-fpd-4.1.2Built on Sat Nov 19 23:49:36 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-diags-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.2Built on Sat Nov 19 23:49:00 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-base, V 4.1.2[00], Cisco Systems, at disk0:hfr-base-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-os-mbi, V 4.1.2[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.2Built on Sat Nov 19 23:32:57 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieBoot device on node 0/SM1/SP is bootflash:Package active on node 0/SM1/SP:iosxr-infra, V 4.1.2[00], Cisco Systems, at disk0:iosxr-infra-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-diags, V 4.1.2[00], Cisco Systems, at disk0:iosxr-diags-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fpd, V 4.1.2[00], Cisco Systems, at disk0:hfr-fpd-4.1.2Built on Sat Nov 19 23:49:36 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-diags-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.2Built on Sat Nov 19 23:49:00 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-base, V 4.1.2[00], Cisco Systems, at disk0:hfr-base-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-os-mbi, V 4.1.2[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.2Built on Sat Nov 19 23:32:57 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieBoot device on node 0/SM2/SP is bootflash:Package active on node 0/SM2/SP:iosxr-infra, V 4.1.2[00], Cisco Systems, at disk0:iosxr-infra-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-diags, V 4.1.2[00], Cisco Systems, at disk0:iosxr-diags-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fpd, V 4.1.2[00], Cisco Systems, at disk0:hfr-fpd-4.1.2Built on Sat Nov 19 23:49:36 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-diags-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.2Built on Sat Nov 19 23:49:00 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-base, V 4.1.2[00], Cisco Systems, at disk0:hfr-base-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-os-mbi, V 4.1.2[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.2Built on Sat Nov 19 23:32:57 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieBoot device on node 0/SM3/SP is bootflash:Package active on node 0/SM3/SP:iosxr-infra, V 4.1.2[00], Cisco Systems, at disk0:iosxr-infra-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-diags, V 4.1.2[00], Cisco Systems, at disk0:iosxr-diags-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fpd, V 4.1.2[00], Cisco Systems, at disk0:hfr-fpd-4.1.2Built on Sat Nov 19 23:49:36 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-diags-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.2Built on Sat Nov 19 23:49:00 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-base, V 4.1.2[00], Cisco Systems, at disk0:hfr-base-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-os-mbi, V 4.1.2[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.2Built on Sat Nov 19 23:32:57 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieRP/0/RP0/CPU0:router(admin)#$
Cisco CRS-3 show version Output
Step 1
Establish a Telnet session with the router.
Step 2
Enter the show version command from EXEC mode.
RP/0/RP0/CPU0:router(admin)#show version
Cisco IOS XR Software, Version 4.1.2[Default]Copyright (c) 2011 by Cisco Systems, Inc.ROM: System Bootstrap, Version 2.05(20110622:151317) [CRS ROMMON],PE1 uptime is 1 day, 19 hours, 19 minutesSystem image file is "disk0:hfr-os-mbi-4.1.2/0x100008/mbihfr-rp-x86e.vm"cisco CRS-16/S (Intel 686 F6M14S4) processor with 6291456K bytes of memory.Intel 686 F6M14S4 processor at 2128Mhz, Revision 2.174Cisco CRS Series 16 Slots Line Card Chassis2 Management Ethernet57 TenGigE48 WANPHY controller(s)4 E34 T349 GigabitEthernet31 SONET/SDH28 Packet over SONET/SDH8 Serial network interface(s)3 Asynchronous Transfer Mode1 HundredGigE1019k bytes of non-volatile configuration memory.14712M bytes of hard disk.10449904k bytes of disk0: (Sector size 512 bytes).10449904k bytes of disk1: (Sector size 512 bytes).Boot device on node 0/4/CPU0 is mem:Package active on node 0/4/CPU0:iosxr-ce, V 4.1.2[00], Cisco Systems, at disk0:iosxr-ce-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-ce, V 4.1.2[00], Cisco Systems, at disk0:hfr-ce-4.1.2Built on Sat Nov 19 23:31:17 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-service-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-service-supp-4.1.2Built on Sat Nov 19 23:48:37 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-service, V 4.1.2[00], Cisco Systems, at disk0:iosxr-service-4.1.2Built on Sat Nov 19 23:48:37 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-mpls, V 4.1.2[00], Cisco Systems, at disk0:iosxr-mpls-4.1.2Built on Sat Nov 19 23:33:48 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-mcast, V 4.1.2[00], Cisco Systems, at disk0:iosxr-mcast-4.1.2Built on Sat Nov 19 23:33:20 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-routing, V 4.1.2[00], Cisco Systems, at disk0:iosxr-routing-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-infra, V 4.1.2[00], Cisco Systems, at disk0:iosxr-infra-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fwding, V 4.1.2[00], Cisco Systems, at disk0:hfr-fwding-4.1.2Built on Sat Nov 19 23:31:17 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-fwding, V 4.1.2[00], Cisco Systems, at disk0:iosxr-fwding-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-diags, V 4.1.2[00], Cisco Systems, at disk0:iosxr-diags-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fpd, V 4.1.2[00], Cisco Systems, at disk0:hfr-fpd-4.1.2Built on Sat Nov 19 23:49:36 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-diags-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.2Built on Sat Nov 19 23:49:00 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-mcast-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-mcast-supp-4.1.2Built on Sat Nov 19 23:33:20 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-base, V 4.1.2[00], Cisco Systems, at disk0:hfr-base-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-os-mbi, V 4.1.2[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.2Built on Sat Nov 19 23:32:57 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieBoot device on node 0/6/CPU0 is mem:Package active on node 0/6/CPU0:iosxr-ce, V 4.1.2[00], Cisco Systems, at disk0:iosxr-ce-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-ce, V 4.1.2[00], Cisco Systems, at disk0:hfr-ce-4.1.2Built on Sat Nov 19 23:31:17 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-service-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-service-supp-4.1.2Built on Sat Nov 19 23:48:37 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-service, V 4.1.2[00], Cisco Systems, at disk0:iosxr-service-4.1.2Built on Sat Nov 19 23:48:37 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-mpls, V 4.1.2[00], Cisco Systems, at disk0:iosxr-mpls-4.1.2Built on Sat Nov 19 23:33:48 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-mcast, V 4.1.2[00], Cisco Systems, at disk0:iosxr-mcast-4.1.2Built on Sat Nov 19 23:33:20 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-routing, V 4.1.2[00], Cisco Systems, at disk0:iosxr-routing-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-infra, V 4.1.2[00], Cisco Systems, at disk0:iosxr-infra-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fwding, V 4.1.2[00], Cisco Systems, at disk0:hfr-fwding-4.1.2Built on Sat Nov 19 23:31:17 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-fwding, V 4.1.2[00], Cisco Systems, at disk0:iosxr-fwding-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-diags, V 4.1.2[00], Cisco Systems, at disk0:iosxr-diags-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fpd, V 4.1.2[00], Cisco Systems, at disk0:hfr-fpd-4.1.2Built on Sat Nov 19 23:49:36 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-diags-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.2Built on Sat Nov 19 23:49:00 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-mcast-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-mcast-supp-4.1.2Built on Sat Nov 19 23:33:20 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-base, V 4.1.2[00], Cisco Systems, at disk0:hfr-base-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-os-mbi, V 4.1.2[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.2Built on Sat Nov 19 23:32:57 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieBoot device on node 0/7/CPU0 is mem:Package active on node 0/7/CPU0:iosxr-ce, V 4.1.2[00], Cisco Systems, at disk0:iosxr-ce-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-ce, V 4.1.2[00], Cisco Systems, at disk0:hfr-ce-4.1.2Built on Sat Nov 19 23:31:17 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-service-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-service-supp-4.1.2Built on Sat Nov 19 23:48:37 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-service, V 4.1.2[00], Cisco Systems, at disk0:iosxr-service-4.1.2Built on Sat Nov 19 23:48:37 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-mpls, V 4.1.2[00], Cisco Systems, at disk0:iosxr-mpls-4.1.2Built on Sat Nov 19 23:33:48 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-mcast, V 4.1.2[00], Cisco Systems, at disk0:iosxr-mcast-4.1.2Built on Sat Nov 19 23:33:20 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-routing, V 4.1.2[00], Cisco Systems, at disk0:iosxr-routing-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-infra, V 4.1.2[00], Cisco Systems, at disk0:iosxr-infra-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fwding, V 4.1.2[00], Cisco Systems, at disk0:hfr-fwding-4.1.2Built on Sat Nov 19 23:31:17 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-fwding, V 4.1.2[00], Cisco Systems, at disk0:iosxr-fwding-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-diags, V 4.1.2[00], Cisco Systems, at disk0:iosxr-diags-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fpd, V 4.1.2[00], Cisco Systems, at disk0:hfr-fpd-4.1.2Built on Sat Nov 19 23:49:36 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-diags-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.2Built on Sat Nov 19 23:49:00 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-mcast-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-mcast-supp-4.1.2Built on Sat Nov 19 23:33:20 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-base, V 4.1.2[00], Cisco Systems, at disk0:hfr-base-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-os-mbi, V 4.1.2[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.2Built on Sat Nov 19 23:32:57 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieBoot device on node 0/11/CPU0 is disk0:Package active on node 0/11/CPU0:iosxr-ce, V 4.1.2[00], Cisco Systems, at disk0:iosxr-ce-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-doc-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-doc-supp-4.1.2Built on Sat Nov 19 23:49:27 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-ce, V 4.1.2[00], Cisco Systems, at disk0:hfr-ce-4.1.2Built on Sat Nov 19 23:31:17 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-service-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-service-supp-4.1.2Built on Sat Nov 19 23:48:37 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-service, V 4.1.2[00], Cisco Systems, at disk0:iosxr-service-4.1.2Built on Sat Nov 19 23:48:37 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-security, V 4.1.2[00], Cisco Systems, at disk0:iosxr-security-4.1.2Built on Sat Nov 19 23:48:27 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-mpls, V 4.1.2[00], Cisco Systems, at disk0:iosxr-mpls-4.1.2Built on Sat Nov 19 23:33:48 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-mgbl, V 4.1.2[00], Cisco Systems, at disk0:iosxr-mgbl-4.1.2Built on Sat Nov 19 23:33:39 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-mcast, V 4.1.2[00], Cisco Systems, at disk0:iosxr-mcast-4.1.2Built on Sat Nov 19 23:33:20 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-routing, V 4.1.2[00], Cisco Systems, at disk0:iosxr-routing-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-infra, V 4.1.2[00], Cisco Systems, at disk0:iosxr-infra-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fwding, V 4.1.2[00], Cisco Systems, at disk0:hfr-fwding-4.1.2Built on Sat Nov 19 23:31:17 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-fwding, V 4.1.2[00], Cisco Systems, at disk0:iosxr-fwding-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-diags, V 4.1.2[00], Cisco Systems, at disk0:iosxr-diags-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fpd, V 4.1.2[00], Cisco Systems, at disk0:hfr-fpd-4.1.2Built on Sat Nov 19 23:49:36 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-diags-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.2Built on Sat Nov 19 23:49:00 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-k9sec-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-k9sec-supp-4.1.2Built on Sat Nov 19 23:48:27 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-mgbl-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-mgbl-supp-4.1.2Built on Sat Nov 19 23:33:39 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-mcast-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-mcast-supp-4.1.2Built on Sat Nov 19 23:33:20 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-base, V 4.1.2[00], Cisco Systems, at disk0:hfr-base-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-os-mbi, V 4.1.2[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.2Built on Sat Nov 19 23:32:57 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieBoot device on node 0/11/CPU1 is disk0:Package active on node 0/11/CPU1:iosxr-ce, V 4.1.2[00], Cisco Systems, at disk0:iosxr-ce-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-doc-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-doc-supp-4.1.2Built on Sat Nov 19 23:49:27 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-ce, V 4.1.2[00], Cisco Systems, at disk0:hfr-ce-4.1.2Built on Sat Nov 19 23:31:17 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-service-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-service-supp-4.1.2Built on Sat Nov 19 23:48:37 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-service, V 4.1.2[00], Cisco Systems, at disk0:iosxr-service-4.1.2Built on Sat Nov 19 23:48:37 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-security, V 4.1.2[00], Cisco Systems, at disk0:iosxr-security-4.1.2Built on Sat Nov 19 23:48:27 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-mpls, V 4.1.2[00], Cisco Systems, at disk0:iosxr-mpls-4.1.2Built on Sat Nov 19 23:33:48 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-mgbl, V 4.1.2[00], Cisco Systems, at disk0:iosxr-mgbl-4.1.2Built on Sat Nov 19 23:33:39 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-mcast, V 4.1.2[00], Cisco Systems, at disk0:iosxr-mcast-4.1.2Built on Sat Nov 19 23:33:20 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-routing, V 4.1.2[00], Cisco Systems, at disk0:iosxr-routing-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-infra, V 4.1.2[00], Cisco Systems, at disk0:iosxr-infra-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fwding, V 4.1.2[00], Cisco Systems, at disk0:hfr-fwding-4.1.2Built on Sat Nov 19 23:31:17 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-fwding, V 4.1.2[00], Cisco Systems, at disk0:iosxr-fwding-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-diags, V 4.1.2[00], Cisco Systems, at disk0:iosxr-diags-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fpd, V 4.1.2[00], Cisco Systems, at disk0:hfr-fpd-4.1.2Built on Sat Nov 19 23:49:36 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-diags-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.2Built on Sat Nov 19 23:49:00 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-k9sec-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-k9sec-supp-4.1.2Built on Sat Nov 19 23:48:27 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-mgbl-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-mgbl-supp-4.1.2Built on Sat Nov 19 23:33:39 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-mcast-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-mcast-supp-4.1.2Built on Sat Nov 19 23:33:20 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-base, V 4.1.2[00], Cisco Systems, at disk0:hfr-base-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-os-mbi, V 4.1.2[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.2Built on Sat Nov 19 23:32:57 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieBoot device on node 0/15/CPU0 is lcdisk0:Package active on node 0/15/CPU0:iosxr-ce, V 4.1.2[00], Cisco Systems, at disk0:iosxr-ce-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-ce, V 4.1.2[00], Cisco Systems, at disk0:hfr-ce-4.1.2Built on Sat Nov 19 23:31:17 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-service-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-service-supp-4.1.2Built on Sat Nov 19 23:48:37 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-service, V 4.1.2[00], Cisco Systems, at disk0:iosxr-service-4.1.2Built on Sat Nov 19 23:48:37 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-mpls, V 4.1.2[00], Cisco Systems, at disk0:iosxr-mpls-4.1.2Built on Sat Nov 19 23:33:48 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-mcast, V 4.1.2[00], Cisco Systems, at disk0:iosxr-mcast-4.1.2Built on Sat Nov 19 23:33:20 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-routing, V 4.1.2[00], Cisco Systems, at disk0:iosxr-routing-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-infra, V 4.1.2[00], Cisco Systems, at disk0:iosxr-infra-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fwding, V 4.1.2[00], Cisco Systems, at disk0:hfr-fwding-4.1.2Built on Sat Nov 19 23:31:17 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-fwding, V 4.1.2[00], Cisco Systems, at disk0:iosxr-fwding-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-diags, V 4.1.2[00], Cisco Systems, at disk0:iosxr-diags-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fpd, V 4.1.2[00], Cisco Systems, at disk0:hfr-fpd-4.1.2Built on Sat Nov 19 23:49:36 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-diags-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.2Built on Sat Nov 19 23:49:00 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-mcast-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-mcast-supp-4.1.2Built on Sat Nov 19 23:33:20 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-base, V 4.1.2[00], Cisco Systems, at disk0:hfr-base-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-os-mbi, V 4.1.2[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.2Built on Sat Nov 19 23:32:57 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieBoot device on node 0/0/SP is bootflash:Package active on node 0/0/SP:iosxr-infra, V 4.1.2[00], Cisco Systems, at disk0:iosxr-infra-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-diags, V 4.1.2[00], Cisco Systems, at disk0:iosxr-diags-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fpd, V 4.1.2[00], Cisco Systems, at disk0:hfr-fpd-4.1.2Built on Sat Nov 19 23:49:36 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-diags-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.2Built on Sat Nov 19 23:49:00 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-base, V 4.1.2[00], Cisco Systems, at disk0:hfr-base-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-os-mbi, V 4.1.2[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.2Built on Sat Nov 19 23:32:57 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieBoot device on node 0/0/CPU0 is mem:Package active on node 0/0/CPU0:iosxr-ce, V 4.1.2[00], Cisco Systems, at disk0:iosxr-ce-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-ce, V 4.1.2[00], Cisco Systems, at disk0:hfr-ce-4.1.2Built on Sat Nov 19 23:31:17 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-service-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-service-supp-4.1.2Built on Sat Nov 19 23:48:37 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-service, V 4.1.2[00], Cisco Systems, at disk0:iosxr-service-4.1.2Built on Sat Nov 19 23:48:37 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-mpls, V 4.1.2[00], Cisco Systems, at disk0:iosxr-mpls-4.1.2Built on Sat Nov 19 23:33:48 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-mcast, V 4.1.2[00], Cisco Systems, at disk0:iosxr-mcast-4.1.2Built on Sat Nov 19 23:33:20 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-routing, V 4.1.2[00], Cisco Systems, at disk0:iosxr-routing-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-infra, V 4.1.2[00], Cisco Systems, at disk0:iosxr-infra-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fwding, V 4.1.2[00], Cisco Systems, at disk0:hfr-fwding-4.1.2Built on Sat Nov 19 23:31:17 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-fwding, V 4.1.2[00], Cisco Systems, at disk0:iosxr-fwding-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-diags, V 4.1.2[00], Cisco Systems, at disk0:iosxr-diags-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fpd, V 4.1.2[00], Cisco Systems, at disk0:hfr-fpd-4.1.2Built on Sat Nov 19 23:49:36 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-diags-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.2Built on Sat Nov 19 23:49:00 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-mcast-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-mcast-supp-4.1.2Built on Sat Nov 19 23:33:20 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-base, V 4.1.2[00], Cisco Systems, at disk0:hfr-base-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-os-mbi, V 4.1.2[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.2Built on Sat Nov 19 23:32:57 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieBoot device on node 0/1/SP is bootflash:Package active on node 0/1/SP:iosxr-infra, V 4.1.2[00], Cisco Systems, at disk0:iosxr-infra-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-diags, V 4.1.2[00], Cisco Systems, at disk0:iosxr-diags-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fpd, V 4.1.2[00], Cisco Systems, at disk0:hfr-fpd-4.1.2Built on Sat Nov 19 23:49:36 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-diags-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.2Built on Sat Nov 19 23:49:00 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-base, V 4.1.2[00], Cisco Systems, at disk0:hfr-base-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-os-mbi, V 4.1.2[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.2Built on Sat Nov 19 23:32:57 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieBoot device on node 0/1/CPU0 is mem:Package active on node 0/1/CPU0:iosxr-ce, V 4.1.2[00], Cisco Systems, at disk0:iosxr-ce-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-ce, V 4.1.2[00], Cisco Systems, at disk0:hfr-ce-4.1.2Built on Sat Nov 19 23:31:17 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-service-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-service-supp-4.1.2Built on Sat Nov 19 23:48:37 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-service, V 4.1.2[00], Cisco Systems, at disk0:iosxr-service-4.1.2Built on Sat Nov 19 23:48:37 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-mpls, V 4.1.2[00], Cisco Systems, at disk0:iosxr-mpls-4.1.2Built on Sat Nov 19 23:33:48 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-mcast, V 4.1.2[00], Cisco Systems, at disk0:iosxr-mcast-4.1.2Built on Sat Nov 19 23:33:20 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-routing, V 4.1.2[00], Cisco Systems, at disk0:iosxr-routing-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-infra, V 4.1.2[00], Cisco Systems, at disk0:iosxr-infra-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fwding, V 4.1.2[00], Cisco Systems, at disk0:hfr-fwding-4.1.2Built on Sat Nov 19 23:31:17 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-fwding, V 4.1.2[00], Cisco Systems, at disk0:iosxr-fwding-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-diags, V 4.1.2[00], Cisco Systems, at disk0:iosxr-diags-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fpd, V 4.1.2[00], Cisco Systems, at disk0:hfr-fpd-4.1.2Built on Sat Nov 19 23:49:36 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-diags-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.2Built on Sat Nov 19 23:49:00 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-mcast-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-mcast-supp-4.1.2Built on Sat Nov 19 23:33:20 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-base, V 4.1.2[00], Cisco Systems, at disk0:hfr-base-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-os-mbi, V 4.1.2[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.2Built on Sat Nov 19 23:32:57 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieBoot device on node 0/2/SP is bootflash:Package active on node 0/2/SP:iosxr-infra, V 4.1.2[00], Cisco Systems, at disk0:iosxr-infra-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-diags, V 4.1.2[00], Cisco Systems, at disk0:iosxr-diags-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fpd, V 4.1.2[00], Cisco Systems, at disk0:hfr-fpd-4.1.2Built on Sat Nov 19 23:49:36 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-diags-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.2Built on Sat Nov 19 23:49:00 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-base, V 4.1.2[00], Cisco Systems, at disk0:hfr-base-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-os-mbi, V 4.1.2[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.2Built on Sat Nov 19 23:32:57 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieBoot device on node 0/2/CPU0 is mem:Package active on node 0/2/CPU0:iosxr-ce, V 4.1.2[00], Cisco Systems, at disk0:iosxr-ce-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-ce, V 4.1.2[00], Cisco Systems, at disk0:hfr-ce-4.1.2Built on Sat Nov 19 23:31:17 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-service-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-service-supp-4.1.2Built on Sat Nov 19 23:48:37 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-service, V 4.1.2[00], Cisco Systems, at disk0:iosxr-service-4.1.2Built on Sat Nov 19 23:48:37 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-mpls, V 4.1.2[00], Cisco Systems, at disk0:iosxr-mpls-4.1.2Built on Sat Nov 19 23:33:48 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-mcast, V 4.1.2[00], Cisco Systems, at disk0:iosxr-mcast-4.1.2Built on Sat Nov 19 23:33:20 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-routing, V 4.1.2[00], Cisco Systems, at disk0:iosxr-routing-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-infra, V 4.1.2[00], Cisco Systems, at disk0:iosxr-infra-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fwding, V 4.1.2[00], Cisco Systems, at disk0:hfr-fwding-4.1.2Built on Sat Nov 19 23:31:17 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-fwding, V 4.1.2[00], Cisco Systems, at disk0:iosxr-fwding-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-diags, V 4.1.2[00], Cisco Systems, at disk0:iosxr-diags-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fpd, V 4.1.2[00], Cisco Systems, at disk0:hfr-fpd-4.1.2Built on Sat Nov 19 23:49:36 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-diags-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.2Built on Sat Nov 19 23:49:00 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-mcast-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-mcast-supp-4.1.2Built on Sat Nov 19 23:33:20 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-base, V 4.1.2[00], Cisco Systems, at disk0:hfr-base-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-os-mbi, V 4.1.2[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.2Built on Sat Nov 19 23:32:57 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieBoot device on node 0/3/SP is bootflash:Package active on node 0/3/SP:iosxr-infra, V 4.1.2[00], Cisco Systems, at disk0:iosxr-infra-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-diags, V 4.1.2[00], Cisco Systems, at disk0:iosxr-diags-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fpd, V 4.1.2[00], Cisco Systems, at disk0:hfr-fpd-4.1.2Built on Sat Nov 19 23:49:36 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-diags-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.2Built on Sat Nov 19 23:49:00 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-base, V 4.1.2[00], Cisco Systems, at disk0:hfr-base-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-os-mbi, V 4.1.2[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.2Built on Sat Nov 19 23:32:57 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieBoot device on node 0/3/CPU0 is mem:Package active on node 0/3/CPU0:iosxr-ce, V 4.1.2[00], Cisco Systems, at disk0:iosxr-ce-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-ce, V 4.1.2[00], Cisco Systems, at disk0:hfr-ce-4.1.2Built on Sat Nov 19 23:31:17 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-service-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-service-supp-4.1.2Built on Sat Nov 19 23:48:37 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-service, V 4.1.2[00], Cisco Systems, at disk0:iosxr-service-4.1.2Built on Sat Nov 19 23:48:37 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-mpls, V 4.1.2[00], Cisco Systems, at disk0:iosxr-mpls-4.1.2Built on Sat Nov 19 23:33:48 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-mcast, V 4.1.2[00], Cisco Systems, at disk0:iosxr-mcast-4.1.2Built on Sat Nov 19 23:33:20 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-routing, V 4.1.2[00], Cisco Systems, at disk0:iosxr-routing-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-infra, V 4.1.2[00], Cisco Systems, at disk0:iosxr-infra-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fwding, V 4.1.2[00], Cisco Systems, at disk0:hfr-fwding-4.1.2Built on Sat Nov 19 23:31:17 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-fwding, V 4.1.2[00], Cisco Systems, at disk0:iosxr-fwding-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-diags, V 4.1.2[00], Cisco Systems, at disk0:iosxr-diags-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fpd, V 4.1.2[00], Cisco Systems, at disk0:hfr-fpd-4.1.2Built on Sat Nov 19 23:49:36 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-diags-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.2Built on Sat Nov 19 23:49:00 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-mcast-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-mcast-supp-4.1.2Built on Sat Nov 19 23:33:20 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-base, V 4.1.2[00], Cisco Systems, at disk0:hfr-base-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-os-mbi, V 4.1.2[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.2Built on Sat Nov 19 23:32:57 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieBoot device on node 0/4/SP is bootflash:Package active on node 0/4/SP:iosxr-infra, V 4.1.2[00], Cisco Systems, at disk0:iosxr-infra-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-diags, V 4.1.2[00], Cisco Systems, at disk0:iosxr-diags-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fpd, V 4.1.2[00], Cisco Systems, at disk0:hfr-fpd-4.1.2Built on Sat Nov 19 23:49:36 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-diags-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.2Built on Sat Nov 19 23:49:00 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-base, V 4.1.2[00], Cisco Systems, at disk0:hfr-base-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-os-mbi, V 4.1.2[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.2Built on Sat Nov 19 23:32:57 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieBoot device on node 0/5/SP is bootflash:Package active on node 0/5/SP:iosxr-infra, V 4.1.2[00], Cisco Systems, at disk0:iosxr-infra-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-diags, V 4.1.2[00], Cisco Systems, at disk0:iosxr-diags-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fpd, V 4.1.2[00], Cisco Systems, at disk0:hfr-fpd-4.1.2Built on Sat Nov 19 23:49:36 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-diags-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.2Built on Sat Nov 19 23:49:00 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-base, V 4.1.2[00], Cisco Systems, at disk0:hfr-base-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-os-mbi, V 4.1.2[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.2Built on Sat Nov 19 23:32:57 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieBoot device on node 0/5/CPU0 is mem:Package active on node 0/5/CPU0:iosxr-ce, V 4.1.2[00], Cisco Systems, at disk0:iosxr-ce-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-ce, V 4.1.2[00], Cisco Systems, at disk0:hfr-ce-4.1.2Built on Sat Nov 19 23:31:17 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-service-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-service-supp-4.1.2Built on Sat Nov 19 23:48:37 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-service, V 4.1.2[00], Cisco Systems, at disk0:iosxr-service-4.1.2Built on Sat Nov 19 23:48:37 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-mpls, V 4.1.2[00], Cisco Systems, at disk0:iosxr-mpls-4.1.2Built on Sat Nov 19 23:33:48 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-mcast, V 4.1.2[00], Cisco Systems, at disk0:iosxr-mcast-4.1.2Built on Sat Nov 19 23:33:20 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-routing, V 4.1.2[00], Cisco Systems, at disk0:iosxr-routing-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-infra, V 4.1.2[00], Cisco Systems, at disk0:iosxr-infra-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fwding, V 4.1.2[00], Cisco Systems, at disk0:hfr-fwding-4.1.2Built on Sat Nov 19 23:31:17 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-fwding, V 4.1.2[00], Cisco Systems, at disk0:iosxr-fwding-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-diags, V 4.1.2[00], Cisco Systems, at disk0:iosxr-diags-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fpd, V 4.1.2[00], Cisco Systems, at disk0:hfr-fpd-4.1.2Built on Sat Nov 19 23:49:36 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-diags-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.2Built on Sat Nov 19 23:49:00 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-mcast-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-mcast-supp-4.1.2Built on Sat Nov 19 23:33:20 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-base, V 4.1.2[00], Cisco Systems, at disk0:hfr-base-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-os-mbi, V 4.1.2[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.2Built on Sat Nov 19 23:32:57 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieBoot device on node 0/6/SP is bootflash:Package active on node 0/6/SP:iosxr-infra, V 4.1.2[00], Cisco Systems, at disk0:iosxr-infra-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-diags, V 4.1.2[00], Cisco Systems, at disk0:iosxr-diags-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fpd, V 4.1.2[00], Cisco Systems, at disk0:hfr-fpd-4.1.2Built on Sat Nov 19 23:49:36 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-diags-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.2Built on Sat Nov 19 23:49:00 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-base, V 4.1.2[00], Cisco Systems, at disk0:hfr-base-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-os-mbi, V 4.1.2[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.2Built on Sat Nov 19 23:32:57 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieBoot device on node 0/7/SP is bootflash:Package active on node 0/7/SP:iosxr-infra, V 4.1.2[00], Cisco Systems, at disk0:iosxr-infra-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-diags, V 4.1.2[00], Cisco Systems, at disk0:iosxr-diags-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fpd, V 4.1.2[00], Cisco Systems, at disk0:hfr-fpd-4.1.2Built on Sat Nov 19 23:49:36 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-diags-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.2Built on Sat Nov 19 23:49:00 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-base, V 4.1.2[00], Cisco Systems, at disk0:hfr-base-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-os-mbi, V 4.1.2[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.2Built on Sat Nov 19 23:32:57 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieBoot device on node 0/8/SP is bootflash:Package active on node 0/8/SP:iosxr-infra, V 4.1.2[00], Cisco Systems, at disk0:iosxr-infra-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-diags, V 4.1.2[00], Cisco Systems, at disk0:iosxr-diags-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fpd, V 4.1.2[00], Cisco Systems, at disk0:hfr-fpd-4.1.2Built on Sat Nov 19 23:49:36 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-diags-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.2Built on Sat Nov 19 23:49:00 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-base, V 4.1.2[00], Cisco Systems, at disk0:hfr-base-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-os-mbi, V 4.1.2[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.2Built on Sat Nov 19 23:32:57 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieBoot device on node 0/8/CPU0 is mem:Package active on node 0/8/CPU0:iosxr-ce, V 4.1.2[00], Cisco Systems, at disk0:iosxr-ce-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-ce, V 4.1.2[00], Cisco Systems, at disk0:hfr-ce-4.1.2Built on Sat Nov 19 23:31:17 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-service-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-service-supp-4.1.2Built on Sat Nov 19 23:48:37 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-service, V 4.1.2[00], Cisco Systems, at disk0:iosxr-service-4.1.2Built on Sat Nov 19 23:48:37 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-mpls, V 4.1.2[00], Cisco Systems, at disk0:iosxr-mpls-4.1.2Built on Sat Nov 19 23:33:48 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-mcast, V 4.1.2[00], Cisco Systems, at disk0:iosxr-mcast-4.1.2Built on Sat Nov 19 23:33:20 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-routing, V 4.1.2[00], Cisco Systems, at disk0:iosxr-routing-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-infra, V 4.1.2[00], Cisco Systems, at disk0:iosxr-infra-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fwding, V 4.1.2[00], Cisco Systems, at disk0:hfr-fwding-4.1.2Built on Sat Nov 19 23:31:17 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-fwding, V 4.1.2[00], Cisco Systems, at disk0:iosxr-fwding-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-diags, V 4.1.2[00], Cisco Systems, at disk0:iosxr-diags-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fpd, V 4.1.2[00], Cisco Systems, at disk0:hfr-fpd-4.1.2Built on Sat Nov 19 23:49:36 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-diags-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.2Built on Sat Nov 19 23:49:00 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-mcast-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-mcast-supp-4.1.2Built on Sat Nov 19 23:33:20 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-base, V 4.1.2[00], Cisco Systems, at disk0:hfr-base-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-os-mbi, V 4.1.2[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.2Built on Sat Nov 19 23:32:57 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieBoot device on node 0/9/CPU0 is lcdisk0:Package active on node 0/9/CPU0:iosxr-ce, V 4.1.2[00], Cisco Systems, at disk0:iosxr-ce-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-ce, V 4.1.2[00], Cisco Systems, at disk0:hfr-ce-4.1.2Built on Sat Nov 19 23:31:17 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-service-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-service-supp-4.1.2Built on Sat Nov 19 23:48:37 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-service, V 4.1.2[00], Cisco Systems, at disk0:iosxr-service-4.1.2Built on Sat Nov 19 23:48:37 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-mpls, V 4.1.2[00], Cisco Systems, at disk0:iosxr-mpls-4.1.2Built on Sat Nov 19 23:33:48 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-mcast, V 4.1.2[00], Cisco Systems, at disk0:iosxr-mcast-4.1.2Built on Sat Nov 19 23:33:20 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-routing, V 4.1.2[00], Cisco Systems, at disk0:iosxr-routing-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-infra, V 4.1.2[00], Cisco Systems, at disk0:iosxr-infra-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fwding, V 4.1.2[00], Cisco Systems, at disk0:hfr-fwding-4.1.2Built on Sat Nov 19 23:31:17 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-fwding, V 4.1.2[00], Cisco Systems, at disk0:iosxr-fwding-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-diags, V 4.1.2[00], Cisco Systems, at disk0:iosxr-diags-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fpd, V 4.1.2[00], Cisco Systems, at disk0:hfr-fpd-4.1.2Built on Sat Nov 19 23:49:36 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-diags-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.2Built on Sat Nov 19 23:49:00 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-mcast-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-mcast-supp-4.1.2Built on Sat Nov 19 23:33:20 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-base, V 4.1.2[00], Cisco Systems, at disk0:hfr-base-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-os-mbi, V 4.1.2[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.2Built on Sat Nov 19 23:32:57 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieBoot device on node 0/10/SP is bootflash:Package active on node 0/10/SP:iosxr-infra, V 4.1.2[00], Cisco Systems, at disk0:iosxr-infra-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-diags, V 4.1.2[00], Cisco Systems, at disk0:iosxr-diags-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fpd, V 4.1.2[00], Cisco Systems, at disk0:hfr-fpd-4.1.2Built on Sat Nov 19 23:49:36 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-diags-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.2Built on Sat Nov 19 23:49:00 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-base, V 4.1.2[00], Cisco Systems, at disk0:hfr-base-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-os-mbi, V 4.1.2[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.2Built on Sat Nov 19 23:32:57 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieBoot device on node 0/10/CPU0 is mem:Package active on node 0/10/CPU0:iosxr-ce, V 4.1.2[00], Cisco Systems, at disk0:iosxr-ce-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-ce, V 4.1.2[00], Cisco Systems, at disk0:hfr-ce-4.1.2Built on Sat Nov 19 23:31:17 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-service-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-service-supp-4.1.2Built on Sat Nov 19 23:48:37 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-service, V 4.1.2[00], Cisco Systems, at disk0:iosxr-service-4.1.2Built on Sat Nov 19 23:48:37 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-mpls, V 4.1.2[00], Cisco Systems, at disk0:iosxr-mpls-4.1.2Built on Sat Nov 19 23:33:48 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-mcast, V 4.1.2[00], Cisco Systems, at disk0:iosxr-mcast-4.1.2Built on Sat Nov 19 23:33:20 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-routing, V 4.1.2[00], Cisco Systems, at disk0:iosxr-routing-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-infra, V 4.1.2[00], Cisco Systems, at disk0:iosxr-infra-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fwding, V 4.1.2[00], Cisco Systems, at disk0:hfr-fwding-4.1.2Built on Sat Nov 19 23:31:17 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-fwding, V 4.1.2[00], Cisco Systems, at disk0:iosxr-fwding-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-diags, V 4.1.2[00], Cisco Systems, at disk0:iosxr-diags-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fpd, V 4.1.2[00], Cisco Systems, at disk0:hfr-fpd-4.1.2Built on Sat Nov 19 23:49:36 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-diags-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.2Built on Sat Nov 19 23:49:00 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-mcast-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-mcast-supp-4.1.2Built on Sat Nov 19 23:33:20 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-base, V 4.1.2[00], Cisco Systems, at disk0:hfr-base-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-os-mbi, V 4.1.2[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.2Built on Sat Nov 19 23:32:57 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieBoot device on node 0/11/SP is bootflash:Package active on node 0/11/SP:iosxr-infra, V 4.1.2[00], Cisco Systems, at disk0:iosxr-infra-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-diags, V 4.1.2[00], Cisco Systems, at disk0:iosxr-diags-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fpd, V 4.1.2[00], Cisco Systems, at disk0:hfr-fpd-4.1.2Built on Sat Nov 19 23:49:36 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-diags-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.2Built on Sat Nov 19 23:49:00 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-base, V 4.1.2[00], Cisco Systems, at disk0:hfr-base-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-os-mbi, V 4.1.2[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.2Built on Sat Nov 19 23:32:57 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieBoot device on node 0/12/CPU0 is lcdisk0:Package active on node 0/12/CPU0:iosxr-ce, V 4.1.2[00], Cisco Systems, at disk0:iosxr-ce-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-ce, V 4.1.2[00], Cisco Systems, at disk0:hfr-ce-4.1.2Built on Sat Nov 19 23:31:17 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-service-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-service-supp-4.1.2Built on Sat Nov 19 23:48:37 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-service, V 4.1.2[00], Cisco Systems, at disk0:iosxr-service-4.1.2Built on Sat Nov 19 23:48:37 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-mpls, V 4.1.2[00], Cisco Systems, at disk0:iosxr-mpls-4.1.2Built on Sat Nov 19 23:33:48 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-mcast, V 4.1.2[00], Cisco Systems, at disk0:iosxr-mcast-4.1.2Built on Sat Nov 19 23:33:20 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-routing, V 4.1.2[00], Cisco Systems, at disk0:iosxr-routing-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-infra, V 4.1.2[00], Cisco Systems, at disk0:iosxr-infra-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fwding, V 4.1.2[00], Cisco Systems, at disk0:hfr-fwding-4.1.2Built on Sat Nov 19 23:31:17 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-fwding, V 4.1.2[00], Cisco Systems, at disk0:iosxr-fwding-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-diags, V 4.1.2[00], Cisco Systems, at disk0:iosxr-diags-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fpd, V 4.1.2[00], Cisco Systems, at disk0:hfr-fpd-4.1.2Built on Sat Nov 19 23:49:36 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-diags-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.2Built on Sat Nov 19 23:49:00 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-mcast-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-mcast-supp-4.1.2Built on Sat Nov 19 23:33:20 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-base, V 4.1.2[00], Cisco Systems, at disk0:hfr-base-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-os-mbi, V 4.1.2[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.2Built on Sat Nov 19 23:32:57 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieBoot device on node 0/13/CPU0 is lcdisk0:Package active on node 0/13/CPU0:iosxr-ce, V 4.1.2[00], Cisco Systems, at disk0:iosxr-ce-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-ce, V 4.1.2[00], Cisco Systems, at disk0:hfr-ce-4.1.2Built on Sat Nov 19 23:31:17 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-service-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-service-supp-4.1.2Built on Sat Nov 19 23:48:37 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-service, V 4.1.2[00], Cisco Systems, at disk0:iosxr-service-4.1.2Built on Sat Nov 19 23:48:37 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-mpls, V 4.1.2[00], Cisco Systems, at disk0:iosxr-mpls-4.1.2Built on Sat Nov 19 23:33:48 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-mcast, V 4.1.2[00], Cisco Systems, at disk0:iosxr-mcast-4.1.2Built on Sat Nov 19 23:33:20 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-routing, V 4.1.2[00], Cisco Systems, at disk0:iosxr-routing-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-infra, V 4.1.2[00], Cisco Systems, at disk0:iosxr-infra-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fwding, V 4.1.2[00], Cisco Systems, at disk0:hfr-fwding-4.1.2Built on Sat Nov 19 23:31:17 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-fwding, V 4.1.2[00], Cisco Systems, at disk0:iosxr-fwding-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-diags, V 4.1.2[00], Cisco Systems, at disk0:iosxr-diags-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fpd, V 4.1.2[00], Cisco Systems, at disk0:hfr-fpd-4.1.2Built on Sat Nov 19 23:49:36 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-diags-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.2Built on Sat Nov 19 23:49:00 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-mcast-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-mcast-supp-4.1.2Built on Sat Nov 19 23:33:20 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-base, V 4.1.2[00], Cisco Systems, at disk0:hfr-base-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-os-mbi, V 4.1.2[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.2Built on Sat Nov 19 23:32:57 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieBoot device on node 0/14/CPU0 is lcdisk0:Package active on node 0/14/CPU0:iosxr-ce, V 4.1.2[00], Cisco Systems, at disk0:iosxr-ce-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-ce, V 4.1.2[00], Cisco Systems, at disk0:hfr-ce-4.1.2Built on Sat Nov 19 23:31:17 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-service-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-service-supp-4.1.2Built on Sat Nov 19 23:48:37 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-service, V 4.1.2[00], Cisco Systems, at disk0:iosxr-service-4.1.2Built on Sat Nov 19 23:48:37 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-mpls, V 4.1.2[00], Cisco Systems, at disk0:iosxr-mpls-4.1.2Built on Sat Nov 19 23:33:48 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-mcast, V 4.1.2[00], Cisco Systems, at disk0:iosxr-mcast-4.1.2Built on Sat Nov 19 23:33:20 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-routing, V 4.1.2[00], Cisco Systems, at disk0:iosxr-routing-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-infra, V 4.1.2[00], Cisco Systems, at disk0:iosxr-infra-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fwding, V 4.1.2[00], Cisco Systems, at disk0:hfr-fwding-4.1.2Built on Sat Nov 19 23:31:17 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-fwding, V 4.1.2[00], Cisco Systems, at disk0:iosxr-fwding-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-diags, V 4.1.2[00], Cisco Systems, at disk0:iosxr-diags-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fpd, V 4.1.2[00], Cisco Systems, at disk0:hfr-fpd-4.1.2Built on Sat Nov 19 23:49:36 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-diags-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.2Built on Sat Nov 19 23:49:00 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-mcast-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-mcast-supp-4.1.2Built on Sat Nov 19 23:33:20 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-base, V 4.1.2[00], Cisco Systems, at disk0:hfr-base-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-os-mbi, V 4.1.2[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.2Built on Sat Nov 19 23:32:57 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieConfiguration register on node 0/RP0/CPU0 is 0x102Boot device on node 0/RP0/CPU0 is disk0:Package active on node 0/RP0/CPU0:iosxr-ce, V 4.1.2[00], Cisco Systems, at disk0:iosxr-ce-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-doc-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-doc-supp-4.1.2Built on Sat Nov 19 23:49:27 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-ce, V 4.1.2[00], Cisco Systems, at disk0:hfr-ce-4.1.2Built on Sat Nov 19 23:31:17 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-service-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-service-supp-4.1.2Built on Sat Nov 19 23:48:37 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-service, V 4.1.2[00], Cisco Systems, at disk0:iosxr-service-4.1.2Built on Sat Nov 19 23:48:37 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-security, V 4.1.2[00], Cisco Systems, at disk0:iosxr-security-4.1.2Built on Sat Nov 19 23:48:27 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-mpls, V 4.1.2[00], Cisco Systems, at disk0:iosxr-mpls-4.1.2Built on Sat Nov 19 23:33:48 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-mgbl, V 4.1.2[00], Cisco Systems, at disk0:iosxr-mgbl-4.1.2Built on Sat Nov 19 23:33:39 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-mcast, V 4.1.2[00], Cisco Systems, at disk0:iosxr-mcast-4.1.2Built on Sat Nov 19 23:33:20 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-routing, V 4.1.2[00], Cisco Systems, at disk0:iosxr-routing-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-infra, V 4.1.2[00], Cisco Systems, at disk0:iosxr-infra-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fwding, V 4.1.2[00], Cisco Systems, at disk0:hfr-fwding-4.1.2Built on Sat Nov 19 23:31:17 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-fwding, V 4.1.2[00], Cisco Systems, at disk0:iosxr-fwding-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-diags, V 4.1.2[00], Cisco Systems, at disk0:iosxr-diags-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fpd, V 4.1.2[00], Cisco Systems, at disk0:hfr-fpd-4.1.2Built on Sat Nov 19 23:49:36 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-diags-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.2Built on Sat Nov 19 23:49:00 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-k9sec-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-k9sec-supp-4.1.2Built on Sat Nov 19 23:48:27 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-mgbl-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-mgbl-supp-4.1.2Built on Sat Nov 19 23:33:39 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-mcast-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-mcast-supp-4.1.2Built on Sat Nov 19 23:33:20 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-base, V 4.1.2[00], Cisco Systems, at disk0:hfr-base-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-os-mbi, V 4.1.2[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.2Built on Sat Nov 19 23:32:57 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieConfiguration register on node 0/RP1/CPU0 is 0x102Boot device on node 0/RP1/CPU0 is disk0:Package active on node 0/RP1/CPU0:iosxr-ce, V 4.1.2[00], Cisco Systems, at disk0:iosxr-ce-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-doc-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-doc-supp-4.1.2Built on Sat Nov 19 23:49:27 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-ce, V 4.1.2[00], Cisco Systems, at disk0:hfr-ce-4.1.2Built on Sat Nov 19 23:31:17 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-service-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-service-supp-4.1.2Built on Sat Nov 19 23:48:37 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-service, V 4.1.2[00], Cisco Systems, at disk0:iosxr-service-4.1.2Built on Sat Nov 19 23:48:37 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-security, V 4.1.2[00], Cisco Systems, at disk0:iosxr-security-4.1.2Built on Sat Nov 19 23:48:27 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-mpls, V 4.1.2[00], Cisco Systems, at disk0:iosxr-mpls-4.1.2Built on Sat Nov 19 23:33:48 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-mgbl, V 4.1.2[00], Cisco Systems, at disk0:iosxr-mgbl-4.1.2Built on Sat Nov 19 23:33:39 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-mcast, V 4.1.2[00], Cisco Systems, at disk0:iosxr-mcast-4.1.2Built on Sat Nov 19 23:33:20 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-routing, V 4.1.2[00], Cisco Systems, at disk0:iosxr-routing-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-infra, V 4.1.2[00], Cisco Systems, at disk0:iosxr-infra-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fwding, V 4.1.2[00], Cisco Systems, at disk0:hfr-fwding-4.1.2Built on Sat Nov 19 23:31:17 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-fwding, V 4.1.2[00], Cisco Systems, at disk0:iosxr-fwding-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-diags, V 4.1.2[00], Cisco Systems, at disk0:iosxr-diags-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fpd, V 4.1.2[00], Cisco Systems, at disk0:hfr-fpd-4.1.2Built on Sat Nov 19 23:49:36 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-diags-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.2Built on Sat Nov 19 23:49:00 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-k9sec-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-k9sec-supp-4.1.2Built on Sat Nov 19 23:48:27 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-mgbl-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-mgbl-supp-4.1.2Built on Sat Nov 19 23:33:39 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-mcast-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-mcast-supp-4.1.2Built on Sat Nov 19 23:33:20 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-base, V 4.1.2[00], Cisco Systems, at disk0:hfr-base-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-os-mbi, V 4.1.2[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.2Built on Sat Nov 19 23:32:57 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieBoot device on node 0/FC0/SP is bootflash:Package active on node 0/FC0/SP:iosxr-infra, V 4.1.2[00], Cisco Systems, at disk0:iosxr-infra-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-diags, V 4.1.2[00], Cisco Systems, at disk0:iosxr-diags-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fpd, V 4.1.2[00], Cisco Systems, at disk0:hfr-fpd-4.1.2Built on Sat Nov 19 23:49:36 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-diags-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.2Built on Sat Nov 19 23:49:00 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-base, V 4.1.2[00], Cisco Systems, at disk0:hfr-base-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-os-mbi, V 4.1.2[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.2Built on Sat Nov 19 23:32:57 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieBoot device on node 0/FC1/SP is bootflash:Package active on node 0/FC1/SP:iosxr-infra, V 4.1.2[00], Cisco Systems, at disk0:iosxr-infra-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-diags, V 4.1.2[00], Cisco Systems, at disk0:iosxr-diags-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fpd, V 4.1.2[00], Cisco Systems, at disk0:hfr-fpd-4.1.2Built on Sat Nov 19 23:49:36 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-diags-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.2Built on Sat Nov 19 23:49:00 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-base, V 4.1.2[00], Cisco Systems, at disk0:hfr-base-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-os-mbi, V 4.1.2[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.2Built on Sat Nov 19 23:32:57 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieBoot device on node 0/AM0/SP is bootflash:Package active on node 0/AM0/SP:iosxr-infra, V 4.1.2[00], Cisco Systems, at disk0:iosxr-infra-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-diags, V 4.1.2[00], Cisco Systems, at disk0:iosxr-diags-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fpd, V 4.1.2[00], Cisco Systems, at disk0:hfr-fpd-4.1.2Built on Sat Nov 19 23:49:36 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-diags-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.2Built on Sat Nov 19 23:49:00 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-base, V 4.1.2[00], Cisco Systems, at disk0:hfr-base-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-os-mbi, V 4.1.2[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.2Built on Sat Nov 19 23:32:57 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieBoot device on node 0/AM1/SP is bootflash:Package active on node 0/AM1/SP:iosxr-infra, V 4.1.2[00], Cisco Systems, at disk0:iosxr-infra-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-diags, V 4.1.2[00], Cisco Systems, at disk0:iosxr-diags-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fpd, V 4.1.2[00], Cisco Systems, at disk0:hfr-fpd-4.1.2Built on Sat Nov 19 23:49:36 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-diags-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.2Built on Sat Nov 19 23:49:00 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-base, V 4.1.2[00], Cisco Systems, at disk0:hfr-base-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-os-mbi, V 4.1.2[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.2Built on Sat Nov 19 23:32:57 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieBoot device on node 0/SM2/SP is bootflash:Package active on node 0/SM2/SP:iosxr-infra, V 4.1.2[00], Cisco Systems, at disk0:iosxr-infra-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-diags, V 4.1.2[00], Cisco Systems, at disk0:iosxr-diags-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fpd, V 4.1.2[00], Cisco Systems, at disk0:hfr-fpd-4.1.2Built on Sat Nov 19 23:49:36 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-diags-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.2Built on Sat Nov 19 23:49:00 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-base, V 4.1.2[00], Cisco Systems, at disk0:hfr-base-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-os-mbi, V 4.1.2[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.2Built on Sat Nov 19 23:32:57 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieBoot device on node 0/SM3/SP is bootflash:Package active on node 0/SM3/SP:iosxr-infra, V 4.1.2[00], Cisco Systems, at disk0:iosxr-infra-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-diags, V 4.1.2[00], Cisco Systems, at disk0:iosxr-diags-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fpd, V 4.1.2[00], Cisco Systems, at disk0:hfr-fpd-4.1.2Built on Sat Nov 19 23:49:36 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-diags-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.2Built on Sat Nov 19 23:49:00 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-base, V 4.1.2[00], Cisco Systems, at disk0:hfr-base-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-os-mbi, V 4.1.2[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.2Built on Sat Nov 19 23:32:57 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieBoot device on node 0/SM4/SP is bootflash:Package active on node 0/SM4/SP:iosxr-infra, V 4.1.2[00], Cisco Systems, at disk0:iosxr-infra-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-diags, V 4.1.2[00], Cisco Systems, at disk0:iosxr-diags-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fpd, V 4.1.2[00], Cisco Systems, at disk0:hfr-fpd-4.1.2Built on Sat Nov 19 23:49:36 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-diags-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.2Built on Sat Nov 19 23:49:00 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-base, V 4.1.2[00], Cisco Systems, at disk0:hfr-base-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-os-mbi, V 4.1.2[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.2Built on Sat Nov 19 23:32:57 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieBoot device on node 0/SM5/SP is bootflash:Package active on node 0/SM5/SP:iosxr-infra, V 4.1.2[00], Cisco Systems, at disk0:iosxr-infra-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-diags, V 4.1.2[00], Cisco Systems, at disk0:iosxr-diags-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fpd, V 4.1.2[00], Cisco Systems, at disk0:hfr-fpd-4.1.2Built on Sat Nov 19 23:49:36 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-diags-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.2Built on Sat Nov 19 23:49:00 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-base, V 4.1.2[00], Cisco Systems, at disk0:hfr-base-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-os-mbi, V 4.1.2[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.2Built on Sat Nov 19 23:32:57 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieBoot device on node 0/SM6/SP is bootflash:Package active on node 0/SM6/SP:iosxr-infra, V 4.1.2[00], Cisco Systems, at disk0:iosxr-infra-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-diags, V 4.1.2[00], Cisco Systems, at disk0:iosxr-diags-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fpd, V 4.1.2[00], Cisco Systems, at disk0:hfr-fpd-4.1.2Built on Sat Nov 19 23:49:36 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-diags-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.2Built on Sat Nov 19 23:49:00 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-base, V 4.1.2[00], Cisco Systems, at disk0:hfr-base-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-os-mbi, V 4.1.2[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.2Built on Sat Nov 19 23:32:57 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieBoot device on node 0/SM7/SP is bootflash:Package active on node 0/SM7/SP:iosxr-infra, V 4.1.2[00], Cisco Systems, at disk0:iosxr-infra-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pieiosxr-diags, V 4.1.2[00], Cisco Systems, at disk0:iosxr-diags-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-fpd, V 4.1.2[00], Cisco Systems, at disk0:hfr-fpd-4.1.2Built on Sat Nov 19 23:49:36 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-diags-supp, V 4.1.2[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.2Built on Sat Nov 19 23:49:00 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-base, V 4.1.2[00], Cisco Systems, at disk0:hfr-base-4.1.2Built on Sat Nov 19 23:31:14 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for piehfr-os-mbi, V 4.1.2[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.2Built on Sat Nov 19 23:32:57 PST 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.2/all/workspace for pie
New Cisco CRS Router Software Features
This section contains the new software features that were introduced in Cisco IOS XR Software Release 4.1.2 on the Cisco CRS platform.
•
ISSU (In-Service Software Upgrade)
Note
Cisco Session Border Controller (SBC) is not supported on any platform in Cisco IOS XR Software Release 4.1.2. Cisco IOS XR Software Release 3.7 is the last release that supports SBC.
ISSU (In-Service Software Upgrade)
ISSU (In-Service Software Upgrade) is a user initiated and controlled process or a procedure through a set of CLI commands to upgrade an Cisco IOS XR image that is running on a Cisco Platform that supports SSO/NSF (Stateful switchover/Nonstop forwarding), from lower version to higher version. This moves a Cisco router from one version of SSO/NSF capable Cisco IOS XR image to another version of SSO/NSF capable Cisco IOS XR image with minimized downtime, degradation of service, or loss of packets. The CLI commands are issued in a specific order to perform this process. For Release 4.1.2, only SMUs (Software Maintenance Upgrades) that are identified and tagged as ISSU SMUs can be activated using ISSU.
Note
A SMU marked as parallel process restart or marked as reload cannot be activated using ISSU.
For ISSU, a system is a single-chassis router, with a single pair of (redundant) management nodes. Any node which is the head of a rack in a single-chassis system or redundant service cards is known as the management node. The system treats non-redundant service cards as managed nodes..
The standby management node is upgraded with the new version of the software. The switchover of management node takes place to activate the new version of the software. The upgrade method for non-management nodes uses either the Reload or iMDR (ISSU MDR) methods. iMDR is a warm-reload technology. With iMDR, all the states (with some exceptions) are wiped out and rebuilt in the new software with a reprogrammed hardware after the upgrade. iMDR supports forwarding changes that are impacted in the software and hardware.
LCs (line cards) are upgraded using iMDR or reloaded based on these factors:
•
Nature of the software changes in the image. Some types of software changes cannot be activated on the router using ISSU, and require router reload. However, the majority of software changes can be activated using ISSU.
•
The type of SPA/PLIM associated with an MSC card.
If a LC that is non-iMDR-able or a non-iMDR-able SPA is plugged in and the SPA has to be reset, then the user is notified at the beginning of the ISSU procedure. iMDR process upgrades the software while minimizing the traffic outage during reprogramming of the hardware. During an ISSU upgrade, service processor modules on the Alarm card is upgraded. There is no interruption to the PEM, FAN, Alarm or BITs states or functionality, during such upgrades. Although Service Processor (SP) modules use iMDR, no service outage is experienced on the SP, since there is no forwarding plane to update.
The user can issue a specific CLI command in prompted mode to ensure and verify that there is no degradation of the service throughout the process. However, in unprompted mode, the phases are executed automatically with no user intervention.
An ISSU process comprises of three phases. The supported modes are prompted and unpromoted. The phases are described as:
1.
Load—This initiates the ISSU Process. During this step, ISSU infrastructure ensures that the new image is downloaded to all nodes in a given router and checks the compatibility of the new image to ensure the appropriate system upgrades. For any incompatible images or if an outage is warranted, it notifies the user. On the Cisco CRS router, fabric cards are upgraded with one plane at a time during the load phase. Here, each plane is brought down with its fabric cards being reloaded with new image and then the plane is added back before proceeding to the next plane. All unsupported cards and SPAs are brought down at the beginning of the load phase.
2.
Run—All supported LCs undergo warm reload during the run phase and boot with the new MBI (mimimum boot image) image. After the LCs come up with the new image, an RP (Route Processor) switchover is initiated to activate the RP running the new version. During this initiation, the LCs are held in MBI until the new active RP is fully initiated. Once the new active RP is initiated, LCs proceed with the remaining bring up activities for iMDR. At the conclusion of this phase, the new Active RP, along with the managed node runs the new version of the software. A rollback mechanism is provided in this phase to guard against the catastrophic failures. After the iMDR process is completed, all unsupported SPAs are brought up during the run phase. Also, the standby management node is held in the new version MBI until the iMDR has completed. Once the iMDR is completed, the node is unblocked and the standby RP is restarted and runs with the new version. The standby RP also synchronizes with the Active RP that is running the old software.
3.
Complete—This is the final phase of the ISSU process that concludes the ISSU process and ensures that the new version of the software is running on all nodes in the system. The user cannot go back to the older version of the software, as downgrade process is not supported by ISSU for Release 4.1.2. All unsupported cards are brought up during the complete phase.
A new process iMDR Director is introduced on the LC to coordinate and minimize traffic outage during the iMDR. All ISSU-aware platform independent processes interested in event notifications can become iMDR clients by registering with iMDR process. iMDR helps to rebuild the software state in the new version of the software without disturbing the traffic while hardware is running and forwarding traffic using the old state. When the new state is rebuilt, traffic is stopped completely and the hardware is updated.
The following feature is provided with Release 4.1.2:
•
SMU upgrade ONLY for SMUs tagged for activation using ISSU method.
The following provides the list of supported hardware in ISSU implementation:
The following provides the list of hardware that are not supported in ISSU implementation:
Note
During the ISSU orchestration (from the load process till the complete process), ISSU disables all the unsupported hardware (LCs/SPAs) and holds them in the MBI run. Once ISSU process is completed, the unsupported hardware boot with the new software.
CautionIf the users have DRPs (Distributed Route Processors) in the router, then they must shut down the DRPs manually to start the ISSU. Else, ISSU gets aborted. Also, SDR configurations must be avoided or removed before starting the ISSU.
A SMU delivers a software change to the user in the least possible time. Prior to the ISSU support, SMU installation resulted in either restart of one of more processes or reload of one or more nodes. ISSU minimizes the operational impact that a user experiences. As ISSU does not support software downgrade, SMU upgrades installed using ISSU can only be un-installed by means of parallel reload method.
To perform ISSU SMU upgrade, user must issue the issu keyword when using the install activate command. The three types of SMUs are:
•
ISSU SMU—This is installed using ISSU method. These SMUs can also be installed using parallel reload method by omitting the issu keyword in the install activate command.
•
Reload SMU—This SMU requires parallel reloads during its installation.
•
Restart SMU—This SMU requires process restarts during its installation.
The type of SMU can be identified with the output of show install pie-info <pie> detail.
•
ISSU SMUs are identified by ISSU in the Restart information field. Mixed SMU types can only be combined in the same activation, if parallel reload is used as the activation type. ISSU cannot be used to activate parallel-process-restart SMUs. However, if the user wants to install both parallel-process-restart and ISSU SMUs, the following two options are provided:
–
Use parallel-reload to install the SMUs.
–
Install the parallel-process-restart SMU(s) as a first operation, and then install the ISSU SMU(s) as a separate operation.
RP/0/RP0/CPU0:ROUTER(admin)#show install pie-info tftp://223.255.254.254/hfrp-4.1.2.02I.issu.pie detailMon Jul 11 12:32:27.114 PSTContents of pie file '/tftp://223.255.254.254/hfr-p-4.1.2.02I.issu.pie':Expiry date : Oct 16, 2015 17:51:47 PSTUncompressed size : 727056Compressed size : 316258hfr-p-4.1.2.02I.CSCea12345-1.0.0hfr-p-4.1.2.02I.CSCea12345 V1.0.0[SMU] User specified bundle hfrbase-4.1.2.02I.CSCea12345.pi.pie.[composite package][root package, grouped contents]Vendor : Cisco SystemsDesc : User specified bundle hfr-base-4.1.2.02I.CSCea12345.pi.pie.Build : Built on Fri Jul 8 16:25:25 PST 2011Source : By sjc-lds-773 in /nobackup/ryeh/smu-test-issu for pieCard(s): RP, RP-B, HRP, DRP, 40G-MSC, SP, SCRestart information:Default:parallel impacted processes restartSize Compressed/Uncompressed: 308KB/710KB (43%)Components in package hfr-p-4.1.2.02I.CSCea12345-1.0.0, package hfrp-4.1.2.02I.CSCea12345:hfr-base-4.1.2.02I.CSCea12345-1.0.0hfr-base-4.1.2.02I.CSCea12345 V1.0.0[SMU] HFR base PackageVendor : Cisco SystemsDesc : HFR base PackageBuild : Built on Fri Jul 8 16:25:24 PST 2011Source : By sjc-lds-773 in /nobackup/ryeh/smu-test-issu for pieCard(s): RP, RP-B, HRP, DRP, 40G-MSC, SP, SCRestart information:Default:ISSU (quick) warm reloadSpecific:ISSU (quick) warm reload to and from ***-*Size Compressed/Uncompressed: 308KB/710KB (43%)Components in package hfr-base-4.1.2.02I.CSCea12345-1.0.0,package hfr-base-4.1.2.02I.CSCea12345:hfr-lcplatform-mgr V[r412/3] LC only version of HFRplatform-mgr.hfr-base-4.1.2.02I.CSCea12345-package-compatibilityV[Default] Package Compatibility information for package hfr-base-4.1.2.02I.CSCea12345hfr-base-4.1.2.02I.CSCea12345-package V[Default] Manifestinformation for package hfr-base-4.1.2.02I.CSCea12345•
Restart SMUs are identified by parallel impacted processes restart in the Restart information field:
RP/0/RP0/CPU0:ROUTER(admin)#show install pie-info tftp://223.255.254.254/hfrp-4.1.2.02I.restart.pie detailMon Jul 11 12:40:58.130 PSTContents of pie file '/tftp://223.255.254.254/hfr-p-4.1.2.02I.restart.pie':Expiry date : Oct 16, 2015 17:51:47 PSTUncompressed size : 727059Compressed size : 316260hfr-p-4.1.2.02I.CSCea12345-1.0.0hfr-p-4.1.2.02I.CSCea12345 V1.0.0[SMU] User specified bundle hfrbase-4.1.2.02I.CSCea12345.pi.pie.[composite package][root package, grouped contents]Vendor : Cisco SystemsDesc : User specified bundle hfr-base-4.1.2.02I.CSCea12345.pi.pie.Build : Built on Mon Jul 11 12:14:21 PST 2011Source : By sjc-lds-773 in /nobackup/ryeh/smu-test-restart for pieCard(s): RP, RP-B, HRP, DRP, 40G-MSC, SP, SCRestart information:Default:parallel impacted processes restartSize Compressed/Uncompressed: 308KB/710KB (43%)Components in package hfr-p-4.1.2.02I.CSCea12345-1.0.0, package hfrp-4.1.2.02I.CSCea12345:hfr-base-4.1.2.02I.CSCea12345-1.0.0hfr-base-4.1.2.02I.CSCea12345 V1.0.0[SMU] HFR base PackageVendor : Cisco SystemsDesc : HFR base PackageBuild : Built on Mon Jul 11 12:14:20 PST 2011Source : By sjc-lds-773 in /nobackup/ryeh/smu-test-restart forpieCard(s): RP, RP-B, HRP, DRP, 40G-MSC, SP, SCRestart information:Default:parallel impacted processes restartSize Compressed/Uncompressed: 308KB/710KB (43%)Components in package hfr-base-4.1.2.02I.CSCea12345-1.0.0,package hfr-base-4.1.2.02I.CSCea12345:hfr-lcplatform-mgr V[r412/3] LC only version of HFRplatform-mgr.hfr-base-4.1.2.02I.CSCea12345-package-compatibilityV[Default] Package Compatibility information for package hfr-base-4.1.2.02I.CSCea12345hfr-base-4.1.2.02I.CSCea12345-package V[Default] Manifestinformation for package hfr-base-4.1.2.02I.CSCea12345•
Reload SMUs are identified by parallel reload in the Restart information field:
RP/0/RP0/CPU0:ROUTER(admin)#show install pie-info tftp://223.255.254.254/hfrp-4.1.2.02I.reload.pie detailMon Jul 11 19:13:34.716 PSTContents of pie file '/tftp://223.255.254.254/hfr-p-4.1.2.02I.reload.pie':Expiry date : Oct 16, 2015 17:51:47 PSTUncompressed size : 727058Compressed size : 316251hfr-p-4.1.2.02I.CSCea12345-1.0.0hfr-p-4.1.2.02I.CSCea12345 V1.0.0[SMU] User specified bundle hfrbase-4.1.2.02I.CSCea12345.pi.pie.[composite package][root package, grouped contents]Vendor : Cisco SystemsDesc : User specified bundle hfr-base-4.1.2.02I.CSCea12345.pi.pie.Build : Built on Mon Jul 11 12:57:16 PST 2011Source : By sjc-lds-773 in /nobackup/ryeh/smu-test-reload for pieCard(s): RP, RP-B, HRP, DRP, 40G-MSC, SP, SCRestart information:Default:parallel reloadSize Compressed/Uncompressed: 308KB/710KB (43%)Components in package hfr-p-4.1.2.02I.CSCea12345-1.0.0, package hfrp-4.1.2.02I.CSCea12345:hfr-base-4.1.2.02I.CSCea12345-1.0.0hfr-base-4.1.2.02I.CSCea12345 V1.0.0[SMU] HFR base PackageVendor : Cisco SystemsDesc : HFR base PackageBuild : Built on Mon Jul 11 12:57:15 PST 2011Source : By sjc-lds-773 in /nobackup/ryeh/smu-test-reload for pieCard(s): RP, RP-B, HRP, DRP, 40G-MSC, SP, SCRestart information:Default:parallel reloadSize Compressed/Uncompressed: 308KB/710KB (43%)Components in package hfr-base-4.1.2.02I.CSCea12345-1.0.0,package hfr-base-4.1.2.02I.CSCea12345:hfr-lcplatform-mgr V[r412/3] LC only version of HFRplatform-mgr.hfr-base-4.1.2.02I.CSCea12345-package-compatibilityV[Default] Package Compatibility information for package hfr-base-4.1.2.02I.CSCea12345hfr-base-4.1.2.02I.CSCea12345-package V[Default] Manifestinformation for package hfr-base-4.1.2.02I.CSCea12345The users could execute the following commands outside the maintenance window since there is no traffic impact:
•
install add
Example:install add tftp://223.255.254.245/hfr-px-4.1.2.22I.CSCtr08523.pie•
install activate—This command is used to initiate the ISSU and specify the prompt mode.
Example:install activate id 1 issu prompt-level all issuIt is recommend that the users execute the following command within the maintenance window in run phase.
•
ISSU Run Phase
Example:install operation 70 run•
ISSU Complete Phase
Example:install operation 70 completeThe following new ISSU process syslog events are added:
•
A new event is logged upon execution of each phase (Load, Run and Complete) of the ISSU Process.
•
A new event is logged when the ISSU process is completed.
•
A new event is logged when the Rollback Process is kicked off.
•
A new event is logged for all of the abnormal cases.
Note
ISSU SMU upgraded is ONLY supported for the Cisco CRS-1 router and only for legacy RP. PRP is NOT supported.
Stateful NAT64
Stateful NAT64 (Network Address Translation 64) is a stateful translator between IPv4 and IPv6. NAT64 allows IPv6-only clients to contact IPv4 servers using unicast UDP, TCP, or ICMP. The public IPv4 address can be shared with several IPv6-only clients. NAT64 supports communication between:
•
IPv6 Network and Public IPv4 Internet
•
Public IPv6 Internet and IPv4 Network
•
IPv6 Network and IPv6 Network
NAT64 is implemented on the Cisco CRS-1 router CGSE platform. CGSE (Carrier Grade Service Engine) has four octeons and supports 20 Gbps full duplex traffic. It works on Linux operating system and traffic into CGSE is forwarded using serviceApp interfaces. SVIs (Service Virtual Interfaces) are configured to enable traffic to flow in and out of CGSE.
Each NAT64 instance configured is associated with two serviceApps for the following purposes:
•
One serviceApp is used to carry traffic from IPv6 side
•
Another serviceApp is used to carry traffic from IPv4 side of the NAT64.
NAT64 instance parameters are configured using the CGN (Carrier-Grade NAT) CLI. The NAT64 application in the octeons updates its NAT64 instance and serviceApp databases, which are used to perform the translation between IPv6 and IPv4 and vice versa.
Active CGN instance configuration is replicated in the standby CGN instance through the XR control plane. Translations that are established on the Active CGN instance are exported to the Standby CGN instance as the failure of the Active CGN affects the service until translations are re-established through normal packet flow. Service interruption is moderate for the given fault detection time and translation learning rate in terms of seconds or tens of seconds for a large translation database.
The following are the functionalities being supported in NAT64 implementation:
•
TCP, UDP, and ICMP protocol NAT64
•
IPv4 to IPv6 header translation and vice versa
•
End point independent mapping
•
Address dependant filtering
•
Multiple Address Pools
•
Well known prefix handling
•
NFv9 netflow logging
•
TCP/UDP/ICMP fragments handling
•
IP options and ICMP error handling
•
Protocol based session timers
•
Destination based session timers
•
Hairpinning
•
DNS64 being decoupled and NAT64 working with decoupled DNS64
•
Multiple NAT64 instances each having configurable options
•
XML support for config and show
•
CLI consistent with other CGv6 applications
A maximum of 64 NAT64 instances are supported in the NAT64 configuration. The configuration parameters per NAT64 instance are as follows:
•
NAT64 Prefix—Indicates IPv6 prefix (for mapping destination IPv4 address - default WKP 64:FF9B::/96)
•
NAT64 Prefix Length—Indicates IPv6 NAT64 prefix length (/32, to /96)
•
NAT64 IPv4 map address pool—Indicates outside IPv4 address space for this NAT64 instance
•
IPv4 serviceApp and IPv6 serviceApp interfaces for the instance
•
u-bit-reserved flag—When this configuration is enabled, bits in the range 64-71 in the IPv6 addresses are reserved for several purposes including U-Bit. These bits are not used for translation purposes.
•
Static port configuration—This is a protocol based configuration which specifies source IPv6 address that needs static mapping to the outside IPv4
•
Protocol based timeouts—Indicates active/init timeouts and per destination IP/port timeouts
•
tcp mss—Indicates the tcp mss value to be used while translating packets
•
tos, traffic class, df override related flags similar to NAT64 stateless
•
Netflow information
•
Address dependant filtering enabling
•
Port limit
•
Destination based active timeouts
•
Fragment handling timeouts.
The following set of commands are used to configure NAT64:
service cgn cgn1service-type nat64 stateful xlat1map address-pool 100.1.1.0/24ubit-reservedipv6-prefix 2001:db8::/32protocol tcpaddress 123.14.4.4port 1234 timeout 200!mss 1500static-forward insideaddress 1345:ABc::1 port 123session active timeout 1230!address-family ipv4tos 111interface ServiceApp4tcp mss 28!address-family ipv6interface ServiceApp6protocol icmpreset-mtu!traffic-class 222tcp mss 30df-override!external-logging netflow version 9serveraddress 90.1.1.1 port 99session-loggingThe details of the counters that are maintained on NAT64 instant basis are as follows:
•
Counters to track TCP packet counts V6 -> V4 direction
–
Input
–
Drop due to state mismatch
–
Drop due to no NAT64 instance entry
–
Output
•
Counters to track TCP packet counts V4 -> V6 direction
–
Input
–
Drop due to no NAT64 DB entry
–
Drop due to filtering
–
Drop due to state mismatch
–
Output
•
Counters to track UDP packet counts V6 -> V4 direction
–
Input
–
Drop due to no NAT64 DB entry
–
Output
•
Counters to track UDP packet counts V4 -> V6 direction
–
Input
–
Drop due to no NAT64 DB entry
–
Drop due to filtering
–
Output
–
Drop due to Fragmented UDP pkt with CRC ==0
•
Counters to track ICMP packet counts V6 -> V4 direction
–
Input
–
Drop due to no NAT64 DB entry
–
Drop due to Fragmented ICMPv6 packets
–
Drop due to unsupported ICMP types/codes
–
ICMP Error Output
–
ICMP Query Output
•
Counters to track ICMP packet counts V4 -> V6 direction
–
Input
–
Drop due to no NAT64 DB entry
–
Drop due to Fragmented ICMPv4 packets
–
Drop due to unsupported ICMP types/codes
–
ICMP Error Output
–
ICMP Query Output
•
Counters to track Fragmented packet counts V6 -> V4 direction
–
Input
–
Drop due to invalid next header fields
–
Drop due to no NAT64 DB entry
–
Drop due to timeout of arrival first fragment header
–
Output
•
Counters to track Fragmented packet counts V4 -> V6 direction
–
Input
–
Drop due to no NAT64 DB entry
–
Drop due to timeout of no arrival of first fragment
–
Output
•
Counters to track Option packet counts V6 -> V4 direction
–
Input
–
Drop due to unsupported options
–
Output
The NAT64 based commands are described as follows:
•
Create a NAT64 stateful instance—The following command creates an instance for the NAT64 stateful application. There can be a maximum of 64 NAT64 stateful instances that can be created.
service cgn cgn1serviceSyntax:[no] service-type nat64 stateful nat64instance•
Configure IPv6 prefix and prefix length for a NAT64 stateful instance—This is a NAT64 stateful instance command. This IPv6 prefix is used to convert destination IPv6 address to an external destination IPv4 address which is derived by DNS64 using this prefix and IPv4 address of an external IPv4 address. This configuration is optional.
service cgn cgn1service-type nat64 stateful stfullipv6-prefix 2001:db8::/32!!Syntax:[no] service cgn cgninstance service-type nat64 stful 1 ipv6-prefix ipv6prefix/prefixlen•
Configure ipv4 address poo —This command is used per NAT64 stateful instance. This assigns an IPv4 address pool to be used by a NAT64 stateful instance to map an internal IPv6 address to a public IPv4 address which is used as a source address in the IPv4 network. A maximum of 8 pools per instance can be added and a maximum of /16 inclusive of all NAT64 and NAT44 instances. Total addresses (for pool) per CGSE card (NAT44 and NAT64 included) are /16.
service cgn cgn1service-type nat64 stateful stfullipv4 address-pool 20.20.30.0/24ipv4 address-pool 30.20.30.0/24!!Syntax:[no] service cgn cgninstance service-type nat64 stateful nat64instance ipv4 address-pool ipv4address-prefix/len•
Configure u-bit reserved—This is a NAT64 stateful translation command that is used per instance of NAT64 stateful.When this configuration is enabled, the bits 64-71 in the IPv6 addresses are reserved for various purposes including U-Bit.
service cgn cgn1service-type nat64 stateful stfullubit-reserved!!Syntax:[no] service cgn cgninstance service-type nat64 stateful nat64instance ubit-reserved•
Configure port limit per subscriber for NAT64 stateful instance for TCP, UDP and ICMP—This is a NAT64 stateful service type command user per NAT64 stateful instance. This command restricts the number of ports used by an IPv6 address.
service cgn cgn1service-type nat64 stateful stfullportlimit 10!!Syntax:[no] service cgn cgninstance service-type nat64 stateful nat64instance portlimit portlimitvalue•
Configure timeout value for ICMP, UDP and TCP session per NAT64 stateful instance—This is a NAT64 stateful service type specific command used per NAT64 stateful instance. This command configures the timeout value in seconds for ICMP, TCP or UDP sessions for a NAT64 stateful instance. For TCP and UDP, the user can configure the init and active session timeout values. For ICMP, there are no such options. This configuration is applicable to all the sessions that belong to the particular NAT64 stateful instance.
service cgn cgn1service-type nat64 stateful stful1protocol icmptimeout 908!!!service cgn cgn1service-type nat64 stateful stful1protocol tcpsession active timeout 90!!!service cgn cgn1service-type nat64 stateful stful1protocol tcpsession initial timeout 90!!!service cgn cgn1service-type nat64 stateful stful1protocol udpsession timeout 90!!!Syntax:[no] service cgn cgninstance service-type nat64 stateful nat64instance protocol {tcp} session {initial|active} timeout value[no] service cgn cgninstance service-type nat64 stateful nat64instance protocol {udp|icmp} timeout value•
Configure fragment timeout per NAT64 stateful instance—The NAT64 must limit the amount of resources devoted to the storage of fragmented packets in order to protect from DoS attacks. As long as the NAT64 has available resources, the NAT64 must allow the fragments to arrive over a time interval. The time interval should be configurable and the default value for FRAGMENT_MIN must be 2 sec and FRAGMENT_MAX must be 20 sec.
service cgn cgn1service-type nat64 stateful stfullfragment-timeout 15!!!Syntax:[no] service cgn cgninstance service-tye nat64 stateful nat64instance fragment-timeout value•
IPv4 ServiceApp name—This is a service application on whichV4 traffic enters or leaves.
•
IPv6 ServiceApp name—This is a service application on which V6 traffic enters or leaves.
•
IPv4 & IPv6 TCP MSS configuration—IPv4 TCP traffic's MSS value is set to the smaller of incoming MSS value and IPv6 TCP traffic's MSS value is set to the smaller of incoming MSS value.
•
IPv4 TOS Setting—By default, IPv4 TOS field is copied from IPv6 Traffic Class field. This value can be overridden based on the configured TOS value.
•
IPv6 Traffic Class Setting—By default, IPv6 Traffic Class field is copied from IPv4 field. This value can be overridden based on the configured Traffic Class value.
•
IPv4 DF override—When translating IPv6 packet with no fragment header, IPv4 DF bit is made 1. This can be overridden and DF bit can be set to 0, if incoming IPv6 packets are smaller than 1280 bytes.
•
refresh-direction Outbound—If set, session timer will only be reset, if the in2out packets are flowing.
•
dynamic-port-range start—Provides the start port for selecting outside port for dynamic sessions.
•
Netflow—This indicates the IP address, port of the external netflow server.
–
session-logging—Enabling this would send destination information along with the translation information. Netflow record is send only when the destination information is also available. By default, the translation information is only sent (after the translation entry is created).
–
path-mtu—This is the MTU for the netflow packet.
–
Refresh-rate—This is used to indicate template refresh time.
•
Timeouts
–
Protocol level
•
TCP init/active
•
UDP, ICMP and Frag
–
Destination-based (IP only, port only, IP/port)
•
Maximum 1000 per instance, maximum of 16k per CGSE
•
Static port forwarding
–
TCP, UDP
–
Max 6K per CGSE
The following provide the CLI commands for stateful NAT64:
NAT64 Statistics:
RP/0/RP0/CPU0:router#show cgn nat64 stateful nat64_1 statisticsSun Aug 7 23:24:45.072 UTCStatistics summary of NAT64 Stateful instance: 'nat64_1'--------------------------------------------------------Number of active translations : 1 ? Total Number of translation activeNumber of static translations : 0 ?Number of dynamic translations : 1Number of Sessions : 1Translations create rate : 0Translations delete rate : 0Inside to outside forward rate : 0Outside to inside forward rate : 1Inside to outside drops port limit exceeded : 0Inside to outside drops system limit reached : 0Inside to outside drops resource depletion : 0No translation entry drops : 73Filtering Drops : 0Invalid Ipv6 Prefix Drops : 0Pool address totally free : 255Pool address used : 1Pool address usage:------------------------------------------------External Address Ports Used-------------------------------------------------52.52.52.89 1Show NAT64 instance counters:
RP/0/RP0/CPU0:router#show cgn nat64 Stateful NAT64_1 countersStateful Nat64 IPv6 to IPv4 counters:TCP Input Count: 64TCP NonTranslatable Drop Count: 128TCP NoDb Drop Count: 256TCP Output Count: 320......Stateful Nat64 IPv4 to IPv6 counters:TCP Input Count: 384TCP No Db Drop Count: 448TCP Output Count: 512......Show translations (inside):
show cgn nat64 stateful nat64_1 inside-translation protocol tcp inside-address 3301:db8::2 portstart 1 end 10Inside-translation details-------------------------------------------------------------------------------------- ------NAT64 Stateful instance : nat64_1-------------------------------------------------------------------------------------- ------Outside Protocol Inside Outside Translation Inside OutsideAddress Source Source Type to toPort Port Outside InsidePackets Packets-------------------------------------------------------------------------------------- ------51.51.33.186 tcp 1 42910 dynamic 112 11251.51.33.186 tcp 2 52014 dynamic 112 11251.51.33.186 tcp 3 6316 dynamic 112 11251.51.33.186 tcp 4 45502 dynamic 112 11251.51.33.186 tcp 5 49890 dynamic 111 11151.51.33.186 tcp 6 29084 dynamic 111 11151.51.33.186 tcp 7 30359 dynamic 112 11251.51.33.186 tcp 8 16231 dynamic 112 11251.51.33.186 tcp 9 27703 dynamic 112 112RP/0/RP0/CPU0:CGN-node1#Show translations (outside):
show cgn nat64 stateful nat64_1outside-translation protocol tcp outside-address 51.51.33.186 portstart 6300 end 6310Outside-translation details-------------------------------------------------------------------------------------- ------NAT64 Stateful instance : nat64_1-------------------------------------------------------------------------------------- ------Inside Protocol Outside Inside Translation Inside OutsideAddress Destination Destination Type to toPort Port Outside InsidePackets Packets-------------------------------------------------------------------------------------- ------3301:db8::2 tcp 6300 11144 dynamic 122 1223301:db8::2 tcp 6301 37521 static 121 1213301:db8::2 tcp 6302 50524 dynamic 121 1213301:db8::2 tcp 6303 13872 dynamic 122 1223301:db8::2 tcp 6304 24180 dynamic 121 1213301:db8::2 tcp 6305 53615 dynamic 121 1213301:db8::2 tcp 6306 34139 dynamic 121 1213301:db8::2 tcp 6307 20798 dynamic 121 1213301:db8::2 tcp 6308 2624 dynamic 122 1223301:db8::2 tcp 6309 2282 dynamic 121 1213301:db8::2 tcp 6310 16620 dynamic 121 121Show - Pool Utilization:
# RP/0/RP0/CPU0:router#show cgn nat64 stateful nat64_1 pool-utilization address-range50.1.1.20 50.1.1.30Thu Aug 11 06:31:25.180 UTCPublic address pool utilization details-------------------------------------------------------NAT64 Statefeul instance : nat64_1-------------------------------------------------------Outside Number NumberAddress of ofFree ports Used ports-------------------------------------------------------50.1.1.20 65535 050.1.1.21 65535 050.1.1.22 65535 050.1.1.23 65535 050.1.1.24 65535 050.1.1.25 65535 050.1.1.26 65533 250.1.1.27 65535 050.1.1.28 65535 050.1.1.29 65535 050.1.1.30 65535 0Show session:
RP/0/RP0/CPU0:router#show cgn nat64 stateful nat64_1 sessionprotocol tcp in$Tue Aug 16 03:22:36.537 UTC------------------------------------------------------NAT64 Stateful instance : nat64_1------------------------------------------------------Outside Address : 52.52.52.25Outside Port : 61746Translation Type : dynamicProtocol : tcp------------------------------------------------------Destination Address Destination Port------------------------------------------------------14.14.14.2 40Bulk Ping
In prior Cisco IOS XR Software releases, multiple ping commands are issued through CLI or XML, to check reachability to multiple destinations. This resulted in buying huge CPU time at the QNX/XR microkernel OS, which in turn resulted in more time consumption, thus blocking other processes during this interval.
To overcome this issue, the platform independent Bulk Ping feature is introduced in Release 4.1.2. When a bulk ping mode is chosen, users can input multiple destinations in one ping process itself. The ping process checks the reachability to all the multiple destinations that have been provided and prints the result on the console or back in XML agent. The advantage over this is that there will be no more spawn or exit overhead of QNX. The destination addresses can either be specified in a file or directly entered at the CLI prompt.
The following shows the format of the bulk ping command:
ping bulk ipvr\ipv6 input cli\file [filesystem://<path to input file>][vrf <vrf1>] addr1 <other ping options currently supported>[vrf <vrf2>] addr2 <other ping option currently supported >....[vrf <vrfm>] addrn <other ping options currently supported >The following factors are considered while implementing the Bulk Ping feature:
•
In the bulk ping mode, back-to-back pings to multiple destinations greater than 50 should not take high CPU time of QNX process for handling the spawn or exit.
•
Unlike single ping command, bulk ping process must get completed very quickly by taking only 10% of the actual time on an idle system.
•
Bulk ping mode should be made available for IPv4 destinations also.
•
With CLI being the preferred input method, destination address is entered one by one in inline mode and as a batch (complete set of destination addresses) in batch mode.
•
Except for the vrf option, no other options should be used with the destination address.
•
Only about 8000 destinations are allowed in a single bulk ping process to avoid memory conflicts within the DOS.
The bulk ping commands are issued at the CLI interface both in inline mode and batch mode as follows:
Example for Input through CLI using inline mode
RP/0/RP0/CPU0:router#ping bulk ipv4 input cli inlineFri Sep 16 15:57:23.640 EDT Please enter the first destination (or) Ctrl-D/(exit) to exit:vrf NMVPN 10.2.1.16Type escape sequence to abort.Sending 5, 100-byte ICMP Echos to 10.2.1.16, vrf is NMVPN, timeout is 2seconds:!!!!!Success rate is 100 percent (5/5), round-trip min/avg/max = 6/7/8 msPlease enter the next destination: (or) Ctrl-D/(exit) to exit:Example for Input through CLI using batch mode
RP/0/RP0/CPU0:router#ping bulk ipv4 input cli batchFri Sep 16 15:57:40.141 EDTPlease enter input via CLI with one destination per line and when done Ctrl-D/(exit) to initiate pings:1: vrf NMVPN 10.2.1.16 2: Starting pings...Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 10.2.1.16, vrf is NMVPN, timeout is 2 seconds:!!!!!Success rate is 100 percent (5/5), round-trip min/avg/max = 5/7/9 msRP/0/RP0/CPU0:router#Cisco CRS-3 SW Features
Note
With Cisco IOS XR Software Release 4.1.0 PX, the CRS MSC-140 or CRS FP-140 can now be used for Provider (P) and Provider Edge (PE) Layer 3 router configurations, including Layer 3 VPN features. With Cisco IOS XR Software Release 4.1.0, CRS MSC-140 or CRS FP-140 now supports Layer 2 VPN functionality. Please contact your Cisco representative for more information.
The following features are now supported on the Cisco CRS-3 router in Cisco IOS XR Software Release 4.1.2:
IPv6 ABF
The IPv6 ABF feature for the Cisco CRS-3 router in Release 4.1.2 includes the support for next hop table from specified VRF in the ABF configuration. In addition to its current access list of actions, IPv6 is set to have the following actions for Release 4.1.2:
•
List of next hops—The following gives the situations or conditions on which the hops are made:
–
Up to 3 next hops can be specified with an optional VRF name and an optional IPv6 address.
–
For any of the next hop address that is UP (in global or in specified VRF), the next hop specified with VRF name and IP address identifies the next hop router in the path to the destination (where packets are to be forwarded).
–
For any of the next hop address that is not UP, packets are transferred through standard routing path based on destination address.
–
If the VRF name is not specified in the configuration of next hop, either the global table or the VRF table is used for the next hop lookup.
–
If the IP address is not specified in the configuration of next hop, destination address lookup is done in the specified VRF.
•
List of default hops—This differs from the List of next hops process by means of enabling the next hop only when there is no explicit route in the routing table for the packet to go to the destination address, on the condition that the default keyword to be specified in ACE configuration before next hops.
The following configurations are taken into consideration while implementing this feature:
•
Permitting packets by security ACL and accepting forwarding result from ACE—Packets are forwarded only based on next hop information having either VRF only or both VRF and IPv6 address from ACE result.
•
Permitting packets by security ACT and ignoring forwarding result from ACE—Packets are forwarded using traditional routing based on the destination address.
•
Denying packets from security ACL—This means that the security is denied and the packets matching this ACE will get dropped. For this, an implicit "deny IPv6 any" is present at the end of security ACL to drop packets that does not match permit entries in security ACL.
For any change in VRF or IPv6 address, the next hop status changes. If the status of a next hop changes, PFilter EA gets a notification from ACL client and updates ACL TCAM result entry with new next hop or with no next hop for all next-hops that are down.
The change in VRF name or IP address for any next hop in ACE configuration is considered an ACE modification and thus resets the statistics for that ACE.
The packets are forwarded based on the ABF rule as follows:
•
Packet forwarding at Ingress LC Mode—Here the packet forwarding is done as:
1.
With Adjacent next hop being the action, the following activities are performed:
–
If PLU NH lookup configured in global or specific VRF table results in a default route or with specific route to next hop, the packets are forwarded using traditional forwarding wherein the microcode forwards the packets using the result from PLU lookup launched with packet destination address.
–
On the other hand, the packets are forwarded using ACL next hop PLU lookup result. The microcode adds the next hop extension header including both the IP address and VRF table id in buffer header
2.
With Adjacent default next hop being the action, if PLU lookup with packet destination address results in a default route entry, the packets are forwarded using ACL next hop PLU lookup result. The microcode adds the next hop extension header in buffer header. If not, the forwarding is done in a traditional manner.
•
Packet forwarding at Egress LC Mode—Here the packet forwarding is done as:
–
The NH bit in the buffer header indicates the presence of next hop in buffer header extensions. If this bit is set, Egress PSE microcode would launch PLU lookup using next hop from the next hop extension header for TX adjacency.
–
There are cases where packets hitting the incomplete adjacencies that are caused when the interface connecting to next hop is UP but with the next hop status as down in broadcast networks. In such situations, the microcode would send NH extension header to LC CPU which is an Ingress feature and which is not configured in Egress line card. Here the L2encap node on output interface IDB e-chain punts packet to ND process after which the packet is forwarded or dropped based on ND resolution result.
–
In cases of incomplete or glean adjacency, a global statistics counter is added to count the packets that are sent to LC CPU.
ABF is an ingress ONLY feature. Henceforth, the configuration is rejected for the following reasons:
•
If a next hop is configured in ACE of ACL that is attached to an interface in Egress direction.
•
Modifying an ACL attached in Egress direction with next hop (or ABF) action.
The configuration steps regarding current IPv6 activities are as follows:
In addition to the current IPv6 ACE actions such as permit, deny, log | log-input, the optional next hop or default nexthop with an optional vrf name for each next hop combination of vrf name and next hop address are included by the CLI for packet forwarding.
{[default] nexthop1 [vrf <vrf_name_A>] [ipv6 <IPv6-address1>] [[nexthop2[vrf <vrf_name_B>] [ipv6 <IPv6-address2> ]] [ nexthop3 [vrf <vrf_name_C>] [ipv6 <IPv6-address3>]]]}The nexthop<n>*/default nexthop<n>* extensions are valid only for permit ACEs, whereas n identifies which nexthop. Up to three nexthops are allowed and each nexthop is a combination of vrf name and ipv6 address.
RP/0/RP0/CPU0:router(config)#IPv6 access-list v6RP/0/RP0/CPU0:router(config-IPv6-acl)#10 permit IPv6 any any ?authen Match if authentication header is presentdestopts Match if destination opts header is presentdscp Match packets with given DSCP valuefragments Match if fragment extension header contains a non-zero fragment offsetlog Log matches against this entrylog-input Log matches against this entry, including input interfacepacket-length Check packet lengthprecedence Match packets with given precedencerouting Match if routing header is presentttl Match against Hop Limitdefault Use specified default nexthop on match against this entrynexthop1 Forward to specified nexthop on match against this entry<cr>RP/0/RP0/CPU0:router(config)#IPv6 access-list v6RP/0/RP0/CPU0:router(config-IPv6-acl)#10 permit IPv6 any any nexthop1 ?vrf Enter specific vrf Name for this nexthopipv6 Enter nexthop address<cr>The show command for IPv6 access list with hardware option displays count of packets matched against each ACE along with active next hop that is programmed in hardware. The count of packets forwarded using any of the next hops configured in the ACE are also shown. For any next hop status change, the active next hop is updated in the hardware but the statistics for the ACE will not get reset.
RP/0/RP0/CPU0:router#sh access-lists IPv6 v6_aclMon Apr 6 17:40:44.225 UTCIPv6 access-list v6_acl10 permit IPv6 any host 3ffe::1:10 nexthop1 vrf vrf_A ipv6 3ffe::1:2 nexthop2 vrf vrf_B ipv6 3ffe::2:12 nexthop3 vrf vrf_C ipv6 3ffe::3:1320 permit IPv6 any host 3ffe::1:10 default nexthop1 vrf vrf_A ipv6 3ffe::1:2 nexthop2 vrf vrf_B ipv6 3ffe::2:12 nexthop3 vrf vrf_C ipv6 3ffe::3:13RP/0/RP0/CPU0:router#sh access-lists IPv6 v6_acl hardware ingress loc <>IPv6 access-list v6_acl10 permit IPv6 any host 3ffe::1:10 (nexthop: vrf-B 3ffe::2:12)RP/0/RP0/CPU0:router#sh access-lists IPv6 v6_acl hardware ingress detail loc <>Wed Apr 29 17:56:55.360 UTCACL name: v6_aclSequence Number: 10Grant: permitLogging: OFFPer ace icmp: ONNext Hop Enable: ONVRF: vrf_BVRF Table Id: 123Nexthop: 3ffe::2:12Default Next hop Enable: OFFVRF-Aware IPv4 ABF
VRF-Aware IPv4 ABF feature is supported on CRS-1 and CRS-3 line cards in the Cisco CRS-3 router for the Release 4.1.2. This feature provides configuration of up to 3 next hop addresses belonging to a VRF table rather than a global routing table.
There are three types of next hop addresses per ACE available for the Release 4.1.2:
•
VRF Next Hop Address—This indicates that an IPv4 address can be specified with VRF name. This next hop address is programmed into the ACE result and is used for forwarding, if this is the first UP address and is reachable in the VRF table.
•
VRF Default Next Hop Address—This indicates that an IPv4 default next hop can be specified with VRF name. This default next hop address is programmed into the ACE result and is used for forwarding only on the condition that there is no explicit route available for the packet to the destination address in the global routing table.
•
VRF Select—This indicates that no VRF name and no IPv4 address can be specified. Here the first available VRF is programmed into the ACE result and the destination address of the packets is used to do the forwarding lookup in the VRF table.
Note
VRF-Aware IPv4 ABF is supported on
•
Both CRS-1 and CRS-3 line card types.
•
All PLIM or interface types which support ACL.
The following provides the required configuration for VRF-Aware IPv4 ABF feature:
The show access-list ipv4 is enhanced to display next hop configuration. With the hardware option in show command CLI, the next-hop programmed in hardware is also displayed.
RP/0/RP0/CPU0:router#sh access-lists ipv4 v4_aclMon Apr 6 17:40:44.225 UTCipv4 access-list 4_acl10 permit ipv4 any host 10.1.1.10 nexthop1 vrf vrf-A ipv4 20.1.1.2 nexthop2 vrf vrf-B ipv4 30.1.1.2 nexthop3 vrf vrf-C ipv4 40.1.1.2RP/0/RP0/CPU0:router#sh access-lists IPv4 v4_acl hardware ingress loc <>ipv4 access-list v4_acl10 permit ipv4 any host 10.1.1.10 (nexthop: vrf-B 30.1.1.2)RP/0/RP0/CPU0:router#sh access-lists ipv4 v4_acl hardware ingress detail loc <>Wed Apr 29 17:56:55.360 UTCACL name: v4_aclSequence Number: 10Grant: permitLogging: OFFPer ace icmp: ONNext Hop Enable: ONVRF Table Id: 123Nexthop: 30.1.1.2Default Next hop Enable: OFFCurrent configuration also changes the CLI and the XML based settings.The CLI changes are provided as follows:
The pfilter-ea show command, show access-list ipv4 <name> hardware displays the VRF table ID. This is the hardware table ID, or VRF of the VRF select or VRF next-hop address which is currently active.
A table IDof 0 implies the default or global routing table.
RP/0/RP0/CPU0:router#sh access-lists ipv4 v4_aclMon Apr 6 17:40:44.225 UTCipv4 access-list 4_acl10 permit ipv4 any host 10.1.1.10 nexthop1 vrf vrf-A ipv4 20.1.1.2 nexthop2 vrf vrf-B ipv4 30.1.1.2 nexthop3 vrf vrf-C ipv4 40.1.1.2RP/0/RP0/CPU0:router#sh access-lists IPv4 v4_acl hardware ingress loc <>ipv4 access-list v4_acl10 permit ipv4 any host 10.1.1.10 (tableid: 123 nexthop: 30.1.1.2)RP/0/RP0/CPU0:router#sh access-lists ipv4 v4_acl hardware ingress detail loc <>Wed Apr 29 17:56:55.360 UTCACL name: v4_aclSequence Number: 10Grant: permitLogging: OFFPer ace icmp: ONNext Hop Enable: ONVRF Table Id: 123Nexthop: 30.1.1.2The XML changes for both IPv4 and IPv6 ABF features are as follows:
The VRF Table ID and IPv4/IPv6 next-hop address is added to the following pfilter BAG structures to support IPv4 and IPv6 VRF aware ABF:
bag pfilter_ea_ace_brief {private uint32_t ace_sequence/Sequence@ "ACE sequence number";private uint8_t ace_gr;grant_type ace_grant/Grant@ "Either permit or deny";bool ace_log/IsLog@ "True if log enabled otherwise disabled";bool ace_icmp_on/IsICMPEnabled@ "Per ACE ICMP enabled/disabled";bool ace_no_stats/IsStatistics@ "True if statistics available";uint32_t ace_num_entries/Entries@ "Number of tcam entries";uint64_t ace_hits_count/Hits@ "Number of TCAM hits";private pfilter_engine_type ace_pse_type/PSEType@ "PSE engine type";bool ace_next_hop_enable/IsNextHop@ "True if nexthop enable";3@ "Nexthop IPv6 address";} @ "Pfilter ACL hardware brief";New Hardware Features for the Cisco CRS router
The following new hardware features were introduced in Cisco IOS XR Software Release 4.1.2 on the Cisco CRS router:
•
Cisco CRS Series 8-slot Line Card Chassis (LCC) Enhanced Router
Cisco CRS Series 8-slot Line Card Chassis (LCC) Enhanced Router
Cisco IOS XR Software Release 4.1.2 introduces support for the Cisco CRS Series 8-slot Line Card Chassis (LCC) Enhanced Router. Cisco CRS Series 8-slot Line Card Chassis (LCC) Enhanced Router is a chassis that has 8 slots for modular service cards (MSCs), forwarding processor (FPs) cards, and label switch processor (LSP) cards (all referred to as line cards); associated physical layer interface modules (PLIMs) and SPA Interface Processors (SIPs). Each slot has the capacity of up to 400 gigabits per second (Gbps) ingress and 400 Gbps egress, for a total routing capacity per chassis of 12.8 terabits.
The LCC supports both 40 G and 140 G fabric cards and line cards. The Cisco CRS-1 Carrier Routing System uses fabric cards designed for 40 G operation (CRS-8-FC/S or CRS-8-FC/M cards) and the Cisco CRS-3 Carrier Routing System uses fabric cards designed for 140 G operation (CRS-8-FC140/S or CRS-8-FC140/M cards). A mixture of 40 G and 140 G fabric cards is not supported except during migration.
The chassis has an integrated rack and does not require an external rack. It is bolted to the facility floor. It contains its own power and cooling systems. Power systems are available using AC or DC power.
The Cisco CRS Series 8-slot Line Card Chassis (LCC) Enhanced Router is supported in Release 4.1.2 to increase the middle plane to 400G per slot and to make necessary changes in thermal and power capacity to support this 400G capacity. The Cisco CRS Series 8-slot Line Card Chassis (LCC) Enhanced Router has the same physical dimension as the existing Cisco CRS Series 8-slot Line Card Chassis (LCC) Router. This is compatible to support all 40G and 140G cards.
A new power shelf with an upgraded 70 Amp circuit breaker is created for the Cisco CRS Series 8-slot Line Card Chassis (LCC) Enhanced Router to support an increased load of 400G per slot. The changes made in the hardware have created a new Product ID (PID) for the Chassis, CRS Modular DC Power Shelf for CRS-8/S-B or CRS Modular AC Power Shelf for CRS-8/S-B AC and DC power shelf.
The following provides the characteristics of the Chassis:
•
Slot Numbers—A single-shelf (standalone) system consists of a single LCC. The chassis is provided with slot numbers for major cards that plug into the chassis. The MSC slot numbers on the rear of the chassis are reversed from the PLIM slot numbers on the front side of the chassis. A mated MSC and PLIM are slot specific and mated through the midplane.
•
Chassis Cable Management—Cable Management features in the chassis are provided for both the front (PLIM) and rear (MSC) sides of the chassis. The PLIM side has horizontal cable management features above both card cages. There are two types of vertical cable troughs as part of the chassis cable management: standard width and wider width. The MSC side of the chassis has one cable management system above the lower card cage.
•
Chassis Exterior Components—There are exterior cosmetic components for the front side, rear side of the chassis.
The Cisco CRS Series 8-slot Line Card Chassis (LCC) Enhanced Router support in Release 4.1.2 ensures the following in Phase 1 and Phase 2 implementation:
•
Improves Airflow cooling, EMI performance and incorporates DFM (Design For Manufacturing).
•
Upgrades Power shelf to increase power budget per zone for Cisco CRS 400 support for higher powered HW and incorporates CRS Modular DC Power Shelf for CRS-8/S-B or CRS Modular AC Power Shelf for CRS-8/S-B DFM.
•
Upgrades Fan Tray to use higher performance fans from CRS-16 VE PWM fans.
In addition, the following changes are made for Cisco CRS Series 8-slot Line Card Chassis (LCC) Enhanced Router support in the Cisco CRS router:
•
New PIDs
–
CRS-8-LCC-B—CRS-8 Line Card Chassis-enhanced for CRS-8/S-B
–
CRS-8-PSH-AC-B—CRS Modular AC Power Shelf for CRS-8/S-B
–
CRS-8-PSH-DC-B—CRS Modular DC Power Shelf for CRS-8/S-B
•
Network Management OID—Three OIDs as provided in the following table are requested for the 400G midplane, AC and DC power shelf.
/vob/ios.sys1/sys/MIBS/CISCO-ENTITY-VENDORTYPE-OID-MIB.my+ cevChassisCrs8SBOBJECT IDENTIFIER ::= { cevChassis 1123 }-- CRS-8 Line Card Chassis-enhanced for CRS-8/S-B+ cevPowerSupplyCrs8PshDcBOBJECT IDENTIFIER ::= { cevPowerSupply 330 }-- CRS Modular DC Power Shelf for CRS-8/S-B+ cevPowerSupplyCrs8PshAcBOBJECT IDENTIFIER ::= { cevPowerSupply 331 }-- CRS Modular AC Power Shelf for CRS-8/S-BCisco CRS Series 8-slot Line Card Chassis (LCC) Enhanced Router supports the following CLIs:
•
Inventory manager CLI show and debug commands—The show and debug commands are similar to that of existing CRS-8/S CLI, except for the new PIDs in the inventory display.
RP/0/RP0/CPU0:router(admin)#sh inventory power-supplyThu Jun 16 00:54:32.400 UTCNAME: "Rack 0 - Power Shelf", DESCR: "CRS Modular DC Power Shelf for CRS-8/S-B"PID: CRS-8-PSH-DC-B , VID: V255255, SN: P1A2NAME: "Rack 0 - Power Supply A0", DESCR: "Cisco CRS-1 Series DC Power Module 2100W"PID: CRS-PM-DC , VID: V01, SN: DTM1316004HNAME: "Rack 0 - Power Supply A1", DESCR: "Cisco CRS-1 Series DC Power Module 2100W"PID: CRS-PM-DC , VID: V01, SN: DTM1316004CNAME: "Rack 0 - Power Supply A2", DESCR: "Cisco CRS-1 Series DC Power Module 2100W"PID: CRS-PM-DC , VID: V01, SN: DTM1316003VNAME: "Rack 0 - Power Shelf", DESCR: "CRS Modular DC Power Shelf for CRS-8/S-B"PID: CRS-8-PSH-DC-B , VID: V255255, SN: P1A3NAME: "Rack 0 - Power Supply B0", DESCR: "Cisco CRS-1 Series DC Power Module 2100W"PID: CRS-PM-DC , VID: V01, SN: DTM1316006YNAME: "Rack 0 - Power Supply B2", DESCR: "Cisco CRS-1 Series DC Power Module 2100W"PID: CRS-PM-DC , VID: V01, SN: DTM1316006JNAME: "Rack 0 - Power Supply B3", DESCR: "Cisco CRS-1 Series DC Power Module 2100W"PID: CRS-PM-DC , VID: V01, SN: DTM1316004RRP/0/RP0/CPU0:router(admin)#sh inventory chassisThu Jun 16 00:55:20.616 UTCNAME: "Rack 0 - Chassis", DESCR: "CRS-8 Line Card Chassis-enhanced for CRS-8/S-B"PID: CRS-8-LCC-B , VID: V04, SN: TBM14399128RP/0/RP0/CPU0:router(admin)#sh inventory fanThu Jun 16 00:55:51.800 UTCNAME: "Rack 0 - Fan Tray Upper", DESCR: "Cisco CRS-1 Series Fan Tray for 8 slots LCC"PID: CRS-8-LCC-FAN-TR , VID: V04, SN: TBA12430025NAME: "Rack 0 - Fan Tray Lower", DESCR: "Cisco CRS-1 Series Fan Tray for 8 slots LCC"PID: CRS-8-LCC-FAN-TR , VID: V05, SN: TBA12370014RP/0/RP0/CPU0:router(admin)#sh inventory oidThu Jun 16 00:52:47.254 UTCNAME: "0/RP0/*", DESCR: "Cisco CRS-1 Series 8 Slots Route Processor"PID: CRS-8-RP , VID: V160, SN: SAD083703V9OID: 1.3.6.1.4.1.9.12.3.1.9.55.22NAME: "MgmtEth0/RP0/CPU0/0", DESCR: "RP Mgmt Port"PID: , VID: N/A, SN:OID: 1.3.6.1.4.1.9.12.3.1.10NAME: "ControlEthernet0/RP0/CPU0", DESCR: "CPU_PORT_0"PID: , VID: N/A, SN:OID: 1.3.6.1.4.1.9.12.3.1.10NAME: "ControlEthernet0/RP0/CPU0/S0/1", DESCR: "INTRA_RACK_SWITCH_PORT_0"PID: , VID: N/A, SN:OID: 1.3.6.1.4.1.9.12.3.1.10....NAME: "Rack 0 - Chassis", DESCR: "CRS-8 Line Card Chassis-enhanced for CRS-8/S-B"PID: CRS-8-LCC-B , VID: V04, SN: TBM14399128OID: 1.3.6.1.4.1.9.12.3.1.3.1123NAME: "Rack 0 - Fan Tray Upper", DESCR: "Cisco CRS-1 Series Fan Tray for 8 slots LCC"PID: CRS-8-LCC-FAN-TR , VID: V04, SN: TBA12430025OID: 1.3.6.1.4.1.9.12.3.1.7.84NAME: "Rack 0 - Fan Tray Lower", DESCR: "Cisco CRS-1 Series Fan Tray for 8 slots LCC"PID: CRS-8-LCC-FAN-TR , VID: V05, SN: TBA12370014OID: 1.3.6.1.4.1.9.12.3.1.7.84NAME: "Rack 0 - Power Shelf", DESCR: "CRS Modular DC Power Shelf for CRS-8/S-B"PID: CRS-8-PSH-DC-B , VID: V255255, SN: P1A2OID: 1.3.6.1.4.1.9.12.3.1.6.330NAME: "Rack 0 - Power Supply A0", DESCR: "Cisco CRS-1 Series DC Power Module 2100W"PID: CRS-PM-DC , VID: V01, SN: DTM1316004HOID: 1.3.6.1.4.1.9.12.3.1.6.258NAME: "Rack 0 - Power Shelf", DESCR: "CRS Modular DC Power Shelf for CRS-8/S-B"PID: CRS-8-PSH-DC-B , VID: V255255, SN: P1A3OID: 1.3.6.1.4.1.9.12.3.1.6.330NAME: "Rack 0 - Power Supply B0", DESCR: "Cisco CRS-1 Series DC Power Module 2100W"PID: CRS-PM-DC , VID: V01, SN: DTM1316006YOID: 1.3.6.1.4.1.9.12.3.1.6.258The following factors are considered for Cisco CRS Series 8-slot Line Card Chassis (LCC) Enhanced Router implementation:
•
Cisco CRS Series 8-slot Line Card Chassis (LCC) Enhanced Router powershelf is not backward compatible with the Cisco CRS Series 8-slot Line Card Chassis (LCC) Router.
•
Cisco CRS Series 8-slot Line Card Chassis (LCC) Router power shelf is not compatible with the new Cisco CRS Series 8-slot Line Card Chassis (LCC) Enhanced Router.
•
Invmgr and CCTL are updated to recognize the PIDs for the Cisco CRS Series 8-slot Line Card Chassis (LCC) Enhanced Router and new CRS Modular DC Power Shelf for CRS-8/S-B or CRS Modular AC Power Shelf for CRS-8/S-B AC and DC power shelves.
16G Flash Support
The Cisco IOS XR Software Release 4.1.2 supports the 16G flash cards on CRS-4, CRS-8, RP-B for CRS-16, DRP and SC-Ges. The cards must be formatted within the Cisco IOS XR Software with FAT32 file system as the cards only support FAT32 file system by default.
Important Notes
•
Default timestamp setting—The timestamp prompt that precedes console output is enabled by default in Cisco IOS XR Software Release 3.8. To disable the timestamp prompt, use the no service timestamp command. For more information, refer to the Cisco IOS XR System Management Command Reference for the Cisco CRS-1 Router.
•
From Cisco IOS XR Software Release 3.6.0, WRED statements are collapsed in that if different random-detect statements using the same match types (EXP, DSCP, Prec, and so forth) are entered with identical minimum and maximum threshold values, a single configuration line is shown in the output of show running config. This reduces the length of the configuration but creates a problem with backward compatibility with previous releases. In such a situation, on rollback, the QoS policy is rejected and must be manually entered again.
Configuration prior to Cisco IOS XR Software Release 3.6.0:
Policy-map wred_exampleClass class-defaultrandom-detect exp 0 384 packets 484 packetsrandom-detect exp 1 384 packets 484 packetsrandom-detect exp 2 384 packets 484 packetsrandom-detect exp 3 484 packets 584 packetsrandom-detect exp 4 484 packets 584 packetsrandom-detect discard-class 0 384 packets 484 packetsrandom-detect discard-class 1 384 packets 484 packetsrandom-detect discard-class 2 484 packets 584 packetsbandwidth remaining percent 20Cisco IOS XR Software Release 3.6.0 and later releases:
policy-map wred_exampleclass class-defaultrandom-detect exp 0,1,2 384 packets 484 packetsrandom-detect exp 3,4 484 packets 584 packetsrandom-detect discard-class 0,1 384 packets 484 packetsrandom-detect discard-class 2 484 packets 584 packetsbandwidth remaining percent 20!end-policy-map!endIn Cisco IOS XR Software Release 3.6.0 and later releases, the implicitly assigned QoS class class-default must have at least 1 percent bandwidth made available to it. This can be done either by assigning at least 1 percent explicitly (bandwidth remaining percent 1) or by ensuring that the total bandwidth assigned to all other classes in the policy is a maximum of 99 percent, leaving 1 percent available for the class-default. A QoS policy that does not have any bandwidth for class-default is rejected when upgrading to Cisco IOS XR Software Release 3.6.0 or later releases.
•
Country-specific laws, regulations, and licences—In certain countries, use of these products may be prohibited and subject to laws, regulations, or licenses, including requirements applicable to the use of the products under telecommunications and other laws and regulations; customers must comply with all such applicable laws in the countries in which they intend to use the products.
•
Card, fan controller, and RP removal—For all card removal and replacement (including fabric cards, line cards, fan controller, and RP) follow the instructions provided by Cisco to avoid impact to traffic. See the Cisco IOS XR Getting Started Guide for the Cisco CRS-1 Router for procedures.
•
Exceeding Cisco testing—If you intend to test beyond the combined maximum configuration tested and published by Cisco, contact your Cisco Technical Support representative to discuss how to engineer a large-scale configuration maximum for your purpose.
•
mpls traffic engineering igp-intact command—This command must be used only when policy based tunnel selection is configured for all tunnels originating on the device.
•
The following commands are not supported on the Cisco CRS-1 Series Router:
–
affinity location set
–
affinity location type
–
affinity program
–
affinity self
•
BFD IPv6 UDP Checksum Calculation—In Cisco IOS XR Software Release 3.9, you turn the BFD IPv6 UDP checksum calculation on and off:
–
To disable the BFD IPv6 UDP checksum calculation:
RP/0/RP0/CPU0:router(config)# bfdRP/0/RP0/CPU0:router(config-bfd)# ipv6 checksum disableRP/0/RP0/CPU0:router(config-bfd)# end–
To enable BFD IPv6 UDP checksum calculation:
RP/0/RP0/CPU0:router(config)# bfdRP/0/RP0/CPU0:router(config-bfd)# no ipv6 checksum disableRP/0/RP0/CPU0:router(config-bfd)# end•
On upgrading the Cisco CRS-1 Software from 3.6.2 to 4.0.0 the MAC address assigned to physical interfaces changes. This is required because prior to Cisco IOS XR software Release 3.8.4 the MAC address assigned to the bundle interface was taken from the first member's MAC address. If this bundle member is removed from the bundle, the bundle gets a new MAC address, which results in traffic loss due to ARP resolution. Beginning in Cisco IOS XR software Release 3.8.4, a pool of MAC addresses are assigned to the bundle interfaces by the bundlemgr process during bundle interface creation.
•
Deactivation of os-mbi dependent (Nonreload) SMU fails—Backing out the non reload os-mbi SMU fails because deactivation runs out of memory (activation did not release some memory, which stayed at 38 MB). This failure to activate or deactivate the SMU due to insufficient SP resources impacts SP cards on Cisco CRS router.
•
When configuring the Label Distribution Protocol (LDP) graceful restart (GR) process in a network with multiple [link and/or targeted] LDP hello adjacencies with the same neighbor, make sure that GR is activated on the session before any hello adjacency times out due to neighbor control plane failures. One way of achieving this is by configuring a lower session hold time between neighbors such that session time out always occurs before hello adjacency can time out. Cisco recommends setting LDP session hold time using the following formula:
LDP session hold time <= (Hello hold time - Hello interval) * 3
This means that for default values of 15/5 seconds respectively for the link Hello hold time and the Hello interval, the LDP session hold time should be set to 30 seconds or less.
For more information, refer to the "Implementing MPLS Label Distribution Protocol on Cisco IOS XR Software" section of the Cisco IOS XR MPLS Configuration Guide, Release 4.0.
•
For information about upgrading from a Cisco CRS-1 router to a Cisco CRS-3 chassis, refer to the Cisco CRS-1 Carrier Routing System to Cisco CRS-3 Carrier Routing System Upgrade Guide at the following URL:
http://www.cisco.com/en/US/products/ps5763/prod_installation_guides_list.html
•
The following commands have been modified to support Cisco CRS-3 router:
–
show environment
–
hw-module reload
–
show controllers egressq client location
–
show controllers egressq queue drr [max | min] location <>
–
show controllers egressq group drr [max | min] location <>
–
show controllers egressq group ntb [max | min] location <>
–
show controllers egressq port bpmap location <>
–
show controllers egressq statistics detail location <>
–
show controllers egressq resources location <>
For information about these commands, refer to the Commands section of the Cisco CRS-1 Carrier Routing System to Cisco CRS-3 Carrier Routing System Upgrade Guide:
http://www.cisco.com/en/US/products/ps5763/prod_installation_guides_list.html
•
For Cisco IOS XR software Release 4.0.0 and above, after upgrading, the FPGA upgrade using the auto-fpd upgrade command as a part of the auto-fpd upgrade process fails for the SPA-1X10GE-L-V2 SPA. The workaround is to perform a manual FPGA upgrade on the SPA-1X10GE-L-V2 SPA using the upgrade hw-module fpd fpga1 location 0/0/1 command in admin mode after the auto-fpd upgrade command execution completes.
•
The minimum timer configuration value for the BFD on Bundle Members feature (BoB) increases from 30 to 60 seconds in Cisco IOS XR Software Release 4.1.2. The timer value can be left as default or modified as follows:
–
int bundle-(ether|pos) <num>
–
bfd address-family ipv4 timers start <30-3600>
–
bfd address-family ipv4 timers nbr-unconfig <30-3600>
•
Optics Supported in Cisco IOS XR software Release 4.1.2—See Table 6.
DWDM-XFP listed in Table 6 includes any one of the DWDM-XFPs listed in Table 7.
Reference caveat, CSCtk96820. Please contact your Cisco representative for more information on dates by which this will be available.
•
For Cisco IOS XR Software Release 4.0.0 and above the hw-module location <LOC> reload warm command has been disabled. This means that the warm reload feature has been disabled.
New DWDM Configuration Requirement
Note
This section describes only the new DWDM configuration requirements in Cisco IOS XR 3.9.0 and later releases. It does not describe all updates to the DWDM feature. For more information about DWDM configuration, refer to the "Configuring Dense Wavelength Division Multiplexing Controllers on Cisco IOS XR Software" module in the Cisco IOS XR Interface and Hardware Component Configuration Guide for the Cisco CRS-1 Router.
Cisco IOS XR Software Release 3.9.0 introduced new commands in addition to an important change to the default laser state for all of the DWDM physical layer interface modules (PLIMs) supported on the Cisco CRS-1 router, which impacts the required configuration to support those cards.
This change affects all models of the following hardware on the Cisco CRS-1 router:
•
Cisco 1-Port OC-768c/STM-256c DWDM PLIM
•
Cisco 4-Port 10-Gigabit Ethernet DWDM PLIM
Summary of Important DWDM Changes in Cisco IOS XR Software Release 3.9.0 and Later Releases
•
The laser off and shutdown (DWDM) commands are replaced by the admin-state out-of-service command.
•
The default state of the laser has changed from "On" to "Off" for all PLIMs. Therefore, the laser for all DWDM controllers must explicitly be turned on using the admin-state in-service command in DWDM configuration mode.
Configuration Examples in Cisco IOS XR Software Release 3.9.0 and Later Releases
This section provides configuration examples for turning on and off the laser on a DWDM PLIM.
Turning On the Laser: Example
Note
This is a required configuration beginning in Cisco IOS XR Software Release 3.9.0. The DWDM PLIMs will not operate without this configuration.
The following example shows how to turn on the laser and place a DWDM port in In Service (IS) state:
RP/0/RP0/CPU0:router# configureRP/0/RP0/CPU0:router(config)# controller dwdm 0/1/0/1RP/0/RP0/CPU0:router(config-dwdm)# admin-state in-serviceRP/0/RP0/CPU0:router(config-dwdm)# commitTurning Off the Laser: Example
Note
This configuration replaces the laser off and shutdown (DWDM) configuration commands.
The following example shows how to turn off the laser, stop all traffic and place a DWDM port in Out of Service (OOS) state:
RP/0/RP0/CPU0:router# configureRP/0/RP0/CPU0:router(config)# controller dwdm 0/1/0/1RP/0/RP0/CPU0:router(config-dwdm)# admin-state out-of-serviceRP/0/RP0/CPU0:router(config-dwdm)# commitMinimum Flash Disk Requirements When Upgrading to Release 4.1.2
Cisco IOS XR Software Release 4.1.2 requires a 2-GB Flash Disk as a minimum. If your Cisco CRS currently uses a 1-GB Flash Disk, you must upgrade it to 2-GB before upgrading to Cisco IOS XR Software Release 4.1.2. The PCMCIA 1-GB Flash Disk was the default size for the Cisco CRS running Cisco IOS XR Software Release 3.6 and earlier.
In Cisco IOS XR Software Release 3.6 and later releases, disk partitioning is supported. Partitioning of a 2-GB disk is possible but not required. Partitioning of a 4-GB disk is required.
A 4-GB Flash Disk can be installed instead of the 2-GB for greater disk storage.
To upgrade from a 1-GB flash disk to a 2-GB or greater flash disk, refer to the Flash Disk Upgrade Tasks link on the following Cisco CRS router Installation and Upgrade URL: http://www.cisco.com/en/US/products/ps5763/prod_installation_guides_list.html
Additional upgrade instructions for the Cisco CRS router are available from http://www.cisco.com/web/Cisco_IOS_XR_Software/pdf/ReplacingPCMCIACardOnCRS-1.pdf
Caveats
Caveats describe unexpected behavior in Cisco IOS XR Software releases. Severity-1 caveats are the most serious caveats; severity-2 caveats are less serious.
This section contains caveats that are generic to the Cisco IOS XR Release 4.1.2 Software and those specific to the Cisco CRS-1 router and the Cisco CRS-3 router.
Cisco IOS XR Caveats
The following open caveats apply to Cisco IOS XR Software Release 4.1.2 and are not platform specific:
•
CSCtt29747
Basic Description:
Error adding 2K RT through XML interface.
Symptom:
<?xml version="1.0"?><Response MajorVersion="1" MinorVersion="0"><Set ErrorCode="0x43679000"ErrorMsg="'XML Service Library' detected the 'warning'condition 'An error was encountered in the XML beneath this operationtag'"><Configuration><RoutingPolicy MajorVersion="3"MinorVersion="1"><Sets><ExtendedCommunityRTSetTable><ExtendedCommunityRTSetErrorCode="0x4368a200" ErrorMsg="'XMLMDA' detected the'warning' condition 'An XML request provided too little ortoo much values for aclass'"><Naming><SetName>rt_set_global_service</SetName></Naming><ExtendedCommunityRTSetAsText ErrorCode="0x42c6aa00" ErrorMsg="'PolicyRepository' detected the 'warning' condition 'The parserencountered an internal error while parsing thepolicy/set.'"/></ExtendedCommunityRTSet></ExtendedCommunityRTSetTable></Sets></RoutingPolicy></Configuration></Set><Commit ErrorCode="0x41864e00"ErrorMsg="'CfgMgr' detected the 'wa!rning' condition 'The target configuration buffer isempty.'"/><ResultSummary ErrorCount="2"/></Response>Conditions:
Configuring a number of extended community RTs through the XML interface exceeding 8192 bytes. In other words, string length of the content within the ExtendedCommunityRTSetAsText tag exceeding 8192 bytes.This limitation affects other xxxAsText tags in the RPL configuration schema.
Workaround:
None.
Recovery:
None.
•
CSCtr78557
Basic Description:
MPP SNMP out-of-band not working.
Symptom:
SNMP packets coming on out-of-band interface are dropped. When "snmp-server" host trap source-port <port>" configuration gets removed, SNMP inform packets are not received.
Conditions:
Inform notification packets coming on MPP out-of-band interface.
Workaround:
Restart snmpd process.
Recovery:
None.
•
CSCti50227
Basic Description:
Not able to modify RPL and delete prefix-set in a single commit.
Symptom:
When a policy that is attached directly or indirectly to an attach point needs to be modified, a single commit operation cannot be performed when:
–
Removing a set or policy referred by another policy that is attached to any attach point directly or indirectly.
–
Modifying the policy to remove the reference to the same set or policy that is getting removed.
Workaround:
The commit must be performed in two steps:
1.
Modify the policy to remove the reference to the policy or set and then commit.
2.
Remove the policy or set and commit.
CRS Caveats from 4.1.2
The following open caveat is common to both the Cisco CRS-1 router and the Cisco CRS-3 router:
•
CSCts04706
Basic Description:
ipv6_rib : %ROUTING-RIB-3-UPDATE_TIMEOUT : Client "bgp" updated the RIB without signaling update completion for Vrf: "default" Tbl: "default" Safi: "Unicast".
Symptom:
RIB error is seen on console for the client bgp.
ipv6_rib[1121]: %ROUTING-RIB-3-UPDATE_TIMEOUT : Client "bgp" updated the RIB without signaling update completion for Vrf: "default" Tbl: "default" Safi: "Unicast"
Conditions:
This happens while reloading the RPFO or router.
Workaround:
None.
Recovery:
None.
Caveats Specific to the Cisco CRS-1 Router
The following open caveats are specific to the Cisco CRS-1 router:
•
CSCts99249
Basic Description:
CGSE Stateful NAT Line rate traffic results in fabric ping failure.
Symptom:
Fabric ping failure messages are shown in XR console.
Conditions:
When there is a traffic that is above 8 Mpps.
Workaround:
The messages are harmless unless the automatic node reload (ANR) is configured. ANR should be disabled. This defect is fixed in 4.2.1 release.
Recovery:
None.
•
CSCts80241
Basic Description:
After ISSU SMU upgrade, "show red" is not showing the correct reason.
Symptom:
After a reload SMU is activated in the router using the ISSU method, the "show redundancy" does not show correct reason why the active RP and the standby RP got reloaded. This is a display issue and there is no functional impact to the router operation.
Conditions:
This behavior is observed in a CRS-1 router running Cisco IOS XR Software Release 4.1.2.
Workaround:
There is no known workaround available for this issue.
Recovery:
None.
•
CSCtq56162
Basic Description:
Memory leak in mibd_interface on SNMP polling of ATMMIB.
Symptom:
Increase in memory consumption by mibd_interface process on Active RP. It is approximately 16k memory leak for 500 polls.
Conditions:
Cisco CRS router running 4.1.1.x image performing SNMP polling ATMMIB.
Workaround:
None.
Recovery:
System can restart mibd_interface automatically or user can initiate the restart without any impact.
•
CSCtr23982
Basic Description:
%L2-EGRESSQ-3-QUEUE-STUCK-LC reloaded.
Symptom:
EgressQ stuck condition is observed in Cisco CRS-edge profile system with the combination of edge feature set (12vpn, mldp, l3vpn, etc.) and IPv6 HBH options stream.
Conditions:
The issue is observed with overnight traffic and is only applicable to CRS-1 based line cards. Also, the issue is only observed in edge profile running IPv6 HBH options stream with many streams going over MTU limit.
Workaround:
None.
Recovery:
None.
•
CSCto34421
Basic Description:
sysdb svr virtual address fragmentation
Symptom:
In the Cisco IOS XR Software, "SYSDB-SYSDB-6-TIMEOUT-EDM" syslog messages might be displayed steadily.
Conditions:
A syslog message like the following example might be displayed steadily:
RP/0/RP0/CPU0:Mar 29 10:20:05.152 : sysdb_svr_admin[346]: %SYSDB-SYSDB-6-TIMEOUT_EDM :
EDM request for 'admin/oper/fabric/rack/2/lport/s1tx/' from 'online_diag_lc' (jid 227, node
2/3/CPU0). No response from 'fsdb_server' (jid 211, node 2/RP1/CPU0) within the timeout period (100 seconds)
It indicates that certain EDM requests are rejected by sysdb. The reason is that sysdb is not able to allocate memory for replies because of memory fragmentation. The probability to hit this problem is low.
Workaround:
Not available.
Recovery:
Restart sysdb_svr_admin process.
Example: process restart sysdb_svr_admin
•
CSCtu33128
Basic Description:
Big chunk of address pool (/18 or below) may fail.
Symptom:
Addition of big chunk of Address pool (/18 or below) failure may result in CGSE spp crash or HA failure.
Conditions:
Addition of big chunk of Address pool after there is a removal of big chunk of pool(s) in nat64 instances.
Workaround:
Remove the instance and add it back with required address pools, while removing a big chunk in address pool. This would ensure that enough memory is available to take up new pool configurations.
Recovery:
None.
Caveats Specific to the Cisco CRS-3 Router
There are no Cisco CRS-3 router specific caveats available for the Release 4.1.2.
Upgrading Cisco IOS XR Software
Cisco IOS XR Software is installed and activated from modular packages, allowing specific features or software patches to be installed, upgraded, or downgraded without affecting unrelated processes. Software packages can be upgraded or downgraded on all supported card types, or on a single card (node).
Software packages are installed from package installation envelope (PIE) files that contain one or more software components.
The following URL contains links to information about how to upgrade Cisco IOS XR Software:
http://www.cisco.com/web/Cisco_IOS_XR_Software/index.html
Migrating Cisco CRS-1 to Cisco CRS-3
For information about migrating from a Cisco CRS-1 router to a Cisco CRS-3 chassis, refer to the Cisco CRS-1 Carrier Routing System to Cisco CRS-3 Carrier Routing System Migration Guide at the following URL:
http://www.cisco.com/en/US/products/ps5763/prod_installation_guides_list.html
Troubleshooting
For information on troubleshooting Cisco IOS XR Software, refer to the Cisco IOS XR Troubleshooting Guide for the Cisco CRS router and the Cisco IOS XR Getting Started Guide for the Cisco CRS router.
Related Documentation
The most current Cisco CRS router hardware documentation is located at the following URL:
http://www.cisco.com/en/US/products/ps5763/tsd_products_support_series_home.html
The Cisco IOS XR Software documentation set includes the Cisco IOS XR Software configuration guides and command references, as well as a getting started guide.
The most current Cisco CRS router software documentation is located at the following URL:
http://www.cisco.com/en/US/products/ps5763/tsd_products_support_series_home.html
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional information, see What's New in Cisco Product Documentation at: http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html.
Subscribe to What's New in Cisco Product Documentation, which lists all new and revised Cisco technical documentation, as an RSS feed and deliver content directly to your desktop using a reader application. The RSS feeds are a free service.
This document is to be used in conjunction with the documents listed in the "Related Documentation" section.
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)
© 2011 Cisco Systems, Inc. All rights reserved.