Contents

• Miscellaneous Command Reference

• show ip interface brief

Miscellaneous Command Reference

---

This chapter describes miscellaneous commands to configure CPT services.

• show ip interface brief

show ip interface brief

To display the usability status of interfaces configured for various IP addresses, use the show ip interface brief command in privileged EXEC mode.

show ip interface brief [brief]

Syntax Description

brief

(Optional) Displays a summary of the usability status information for each interface.

Command Default

This command has no defaults.

Command Modes

Privileged EXEC

Command History

Release	Modification
9.3.0	This command was introduced.

Usage Guidelines

The show ip interface brief command can be used to view a summary of the router interfaces. This command displays the IP address, interface status, and additional information.

Examples

Example

The following is sample output from the show ip interface brief command:

Router# show ip interface brief

Interface             IP-Address      OK?    Method Status     	Protocol
GigabitEthernet0/1    unassigned      YES    unset  up         	up
GigabitEthernet0/2    192.168.190.235 YES    unset  up         	up
GigabitEthernet0/3    unassigned      YES    unset  up         	up
GigabitEthernet0/4    192.168.191.2   YES    unset  up         	up
TenGigabitEthernet2/1 unassigned      YES    unset  up         	up
TenGigabitEthernet2/2 unassigned      YES    unset  up         	up
TenGigabitEthernet2/3 unassigned      YES    unset  up         	up
TenGigabitEthernet2/4 unassigned      YES    unset  down       	down
GigabitEthernet36/1   unassigned      YES    unset  down        down
GigabitEthernet36/2   unassigned      YES    unset  down        down
GigabitEthernet36/11  unassigned      YES    unset  down       	down
GigabitEthernet36/25  unassigned      YES    unset  down       	down 
Te36/45               unassigned      YES    unset  down       	down
Te36/46               unassigned      YES    unset  down       	down
Te36/47               unassigned      YES    unset  down       	down
Te36/48               unassigned      YES    unset  down       	down
Virtual36             unassigned      YES    unset  up         	up

The following table describes the significant fields shown in the display.

Table 1 show ip interface brief Field Description

Field	Description
Interface	Type of interface. Note    The show ip interface brief command also displays GigabitEthernet interfaces. These interfaces reside on slot 0 and are used for internal communication between uplinks and Transport Node Controller (TNC).
IP-Address	IP address assigned to the interface.
OK?	Yes signifies that the IP address is currently valid. No signifies that the IP address is not currently valid.
Method	The method field has the following possible values: RARP or SLARP—Reverse Address Resolution Protocol (RARP) or Serial Line Address Resolution Protocol (SLARP) request BOOTP—Bootstrap protocol TFTP—Configuration file obtained from TFTP server manual—Manually changed by CLI command NVRAM—Configuration file in NVRAM IPCP—ip address negotiated command DHCP—ip address dhcp command unassigned—No IP address unset—Unset other—Unknown
Status	Indicates the status of interface. Valid values and their meanings are: up—Interface is administratively up. down—Interface is administratively down. administratively down—Interface is administratively down.
Protocol	Indicates the operational status of the routing protocol on this interface.