 Feedback
|
Table Of Contents
Cisco Prime Network Analysis Module Software Documentation Guide, 5.1
Cisco Prime Network Analysis Module 5.1 Software Documentation
Cisco Prime Network Analysis Module 5.1 Release Notes
Cisco Prime Network Analysis Module 5.1 User Guide
Cisco Prime Network Analysis Module 5.1 Command Reference
Cisco Prime Network Analysis Module 5.1 API Programmer Guide
Cisco Prime Network Analysis Module 5.1 Third Party and Open Source Copyright Notices
Cisco Prime NAM for ISR G2 SRE Documentation
Cisco 2200 Series NAM Appliance Documentation
Quick Start and Documentation Guide for the Cisco 2200 Series NAM Appliance
Installation and Configuration Guide for the Cisco NAM 2204 Appliance
Installation and Configuration Guide for the Cisco NAM 2220 Appliance
Regulatory Compliance and Safety Information for the Cisco NAM 2200 Series Appliances
Cisco Prime Network Analysis Module for Virtual Services Blades Documentation
Cisco Prime Network Analysis Module for WAAS VB Installation and Configuration Guide, 5.1
Cisco Prime Network Analysis Module (NAM) for Nexus 1010 Installation and Configuration Guide, 5.1
Obtaining Documentation and Submitting a Service Request
Cisco Prime Network Analysis Module Software Documentation Guide, 5.1
April 4, 2011This guide contains the following:
•
Information about the user documentation for Cisco Prime Network Analysis Module 5.1 on various platforms
•
This document contains the following sections:
•
•
•
•
•
Introduction
The Cisco Prime Network Analysis Module 5.1 software enables network managers to understand, manage, and improve how applications and services are delivered to end users. The Network Analysis Module (NAM) offers flow-based traffic analysis of applications, hosts, and conversations, performance-based measurements on application, server, and network latency, quality of experience metrics for network-based services such as Voice over IP (VoIP) and video, and problem analysis using deep, insightful packet captures. The Cisco NAM includes an embedded, web-based GUI that provides quick access to the configuration menus and presents easy-to-read performance reports on web, voice, and video traffic.
Cisco Prime Network Analysis Module 5.1 Software Documentation
This section provides a list of the Cisco Prime Network Analysis Module 5.1 software documentation. You can find links to all NAM software documentation at the following URL:
http://www.cisco.com/en/US/products/sw/cscowork/ps5401/tsd_products
_support_series_home.htmlThe following is a list of the documentation, in the order in which you should address it.
•
•
•
•
•
Cisco Prime Network Analysis Module 5.1 Release Notes
OL-24399-01
The Cisco Prime Network Analysis Module 5.1 Release Notes provide a collection of information including software and hardware compatibility and information about new features, requirements, and anomalies that might exist.
Cisco Prime Network Analysis Module 5.1 User Guide
OL-24410-01
The Cisco Prime Network Analysis Module 5.1 User Guide describes how to use the Cisco Prime Network Analysis Module and NAM 5.1 user software.
http://cisco.com/en/US/docs/net_mgmt/network_analysis_module
_software/5.1/user/guide/nam51_ug.htmlCisco Prime Network Analysis Module 5.1 Command Reference
OL-24400-01
The Cisco Prime Network Analysis Module 5.1 Command Reference provides information about how to use the NAM command-line interface to manage the NAM devices supported by NAM 5.1 software, including:
•
–
–
•
–
•
–
–
–
–
•
–
–
•
–
–
•
–
–
•
–
Cisco Prime Network Analysis Module 5.1 API Programmer Guide
OL-24408-01
The Cisco Prime Network Analysis Module 5.1 API Programmer Guide describes APIs that are available to connect to the NAM system. The NAM API provides a mechanism for provisioning and retrieving data from the NAM servers using an eXtensible Markup Language (XML) interface. The API utilizes REpresentational State Transfer (REST) methodology to execute requests (web services) over HTTP or HTTPS by sending the XML data to the API server.
The developers who use the APIs should have an understanding of a high-level programming language such as Java or an equivalent.
The Cisco Prime Network Analysis Module 5.1 API Programmer Guide is available on the Cisco NAM Technology Center. The Cisco NAM Technology Center is an online resource for additional downloadable Cisco NAM support content, including help for developers who use Cisco NAM application programming interfaces (APIs). The website provides information, guidance, and examples to help you integrate your applications with Cisco NAM. It also provides a platform for you to interact with subject matter experts. To view the information on the Cisco NAM Technology Center website, you must have a Cisco.com account with partner level access, or you must be a Cisco NAM licensee. You can access the Cisco NAM Technology Center at http://developer.cisco.com/web/nam/home.
Cisco Prime Network Analysis Module 5.1 Third Party and Open Source Copyright Notices
OL-24409-01
The Cisco Prime Network Analysis Module 5.1 Third Party and Open Source Copyright Notices provides a listing of all copyright notices for the open source third-party software used in NAM 5.1.
Cisco Prime NAM for ISR G2 SRE Documentation
OL-24407-01
The Cisco Prime Network Analysis Module (NAM) for ISR G2 SRE Installation and Configuration Note provides detailed steps to install the NAM on an ISR G2 SRE and configure the NAM.
Cisco 2200 Series NAM Appliance Documentation
This section describes the Cisco 2200 Series NAM Appliance documentation.
•
•
•
•
Quick Start and Documentation Guide for the Cisco 2200 Series NAM Appliance
78-18440-01
The Quick Start and Documentation Guide for the Cisco 2200 Series NAM Appliance is available online at the following URL:
http://www.cisco.com/en/US/products/ps10113/products_documentation_roadmaps_list.html
This document contains a description of the documentation for the NAM appliance and NAM software and information about how to get started with the NAM appliance.
Installation and Configuration Guide for the Cisco NAM 2204 Appliance
OL-24404-01
The Installation and Configuration Guide for the Cisco NAM 2204 Appliance provides information to help you install and configure the NAM 2204 appliance. This guide includes overview information and details about how to install the appliance, connect the appliance to power and the device it monitors, configure the appliance, log in, and get started setting up the appliance to monitor the device.
The Installation and Configuration Guide for the Cisco NAM 2204 Appliance is an online only document you can find at the following URL:
http://www.cisco.com/en/US/docs/net_mgmt/network_analysis_module_appliance/5.1/
2204/instcfg2204.htmlInstallation and Configuration Guide for the Cisco NAM 2220 Appliance
OL-24403-01
The Installation and Configuration Guide for the Cisco NAM 2220 Appliance provides information to help you install and configure the NAM 2220 appliance. This guide includes overview information and details about how to install the appliance, connect the appliance to power and the device it monitors, configure the appliance, log in, and get started setting up the appliance to monitor the device.
The Installation and Configuration Guide for the Cisco NAM 2220 Appliance is an online only document you can find at the following URL:
Regulatory Compliance and Safety Information for the Cisco NAM 2200 Series Appliances
78-18308-01
The Regulatory Compliance and Safety Information for the Cisco NAM 2200 Series Appliances is a printed document that ships with the NAM appliance and is also available online at the following URL:
The Regulatory Compliance and Safety Information for the Cisco 2200 Series NAM Appliances contains regulatory compliance and safety information for the Cisco 2200 Series NAM appliances.
Cisco Prime Network Analysis Module for Virtual Services Blades Documentation
The following URL provides links to product support, additional product literature, software, and other helpful information for the Cisco WAAS NAM Virtual Blade:
http://www.cisco.com/en/US/products/ps10506/index.html
The following URL provides links to product support, additional product literature, software, and other helpful information for the Nexus 1010 NAM Virtual Blade:
http://www.cisco.com/en/US/products/ps10846/tsd_products_support_series_home.html
Cisco Prime Network Analysis Module for WAAS VB Installation and Configuration Guide, 5.1
OL-24405-01
The Cisco Prime Network Analysis Module (NAM) for WAAS VB Installation and Configuration Guide, 5.1 provides detailed steps to install the NAM VSB on a WAAS appliance and configure the NAM VSB.
Cisco Prime Network Analysis Module (NAM) for Nexus 1010 Installation and Configuration Guide, 5.1
OL-24406-01
The Cisco Prime Network Analysis Module (NAM) for Nexus 1010 Installation and Configuration Guide, 5.1 provides detailed steps to install the NAM VSB on a Nexus 1010 switch and configure the NAM VSB.
Related Documentation
This section provides information about other documentation related to the Network Analysis Module and Cisco Prime NAM 5.1 software.
NAM-1 and NAM-2
Catalyst 6500 Series Switch and Cisco 7600 Series Router Network Analysis Module
Installation Note, 5.1Catalyst 6500 Series Switch and Cisco 7600 Series Router Network Analysis Module
Installation Note, 5.0Catalyst 6500 Series Switch and Cisco 7600 Series Router Network Analysis Module
Installation Note, 4.2Catalyst 6500 Series Switch and Cisco 7600 Series Router Network Analysis Module
Installation Note, 4.1Catalyst 6500 Series Switch and Cisco 7600 Series Router Network Analysis Module
Installation Note, 4.0http://www.cisco.com/en/US/docs/net_mgmt/network_analysis_module
_software/4.0/switch/configuration/guide/swinstcfg.htmlCatalyst 6500 Series Switch and Cisco 7600 Series Router Network Analysis Module
Installation Note, 3.6Catalyst 6500 Series Switch and Cisco 7600 Series Router Network Analysis Module
Installation Note. 3.5NME-NAM
Cisco Branch Routers Series Network Analysis Module (NME-NAM-120S) Installation and Configuration Note, 5.1
Cisco Branch Routers Series Network Analysis Module (NME-NAM-120S) Installation and Configuration Note, 5.0
Cisco Branch Routers Series Network Analysis Module (NME-NAM-120S) Installation and Configuration Note, 4.2
Cisco Branch Routers Series Network Analysis Module (NME-NAM-120S) Installation and Configuration Note, 4.1
http://www.cisco.com/en/US/docs/net_mgmt/network_analysis_module_software/
4.1/branch_router/configuration/guide/BRincfg_120S.htmlCisco NAM Enhanced Network Modules
http://www.cisco.com/en/US/docs/routers/access/interfaces/nm/hardware/
installation/guide/namnme.htmlInstalling Cisco Network Modules and Service Modules
Cisco 3800 Series Hardware Installation
http://cisco.com/en/US/docs/routers/access/3800/hardware/installation/
guide/hw.htmlCisco 3700 Series Routers Hardware Installation Guide
http://www.cisco.com/en/US/docs/routers/access/3700/hardware/
installation/guide/3700hig.htmlInstalling Network Modules in Cisco 2800 Series Routers
http://www.cisco.com/en/US/docs/routers/access/2800/hardware/
installation/guide/08_hw.htmlObtaining Documentation and Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS Version 2.0.
Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco's trademarks can be found at www.cisco.com/go/trademarks. Third party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1005R)
Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.
© 2011 Cisco Systems, Inc. All rights reserved.
