 Feedback
|
Table Of Contents
Documentation Guide for Cisco Network Analysis Module Software, 4.2
Cisco NAM 4.2 Software Documentation
Release Notes for the Cisco Network Analysis Module, Release 4.2
User Guide for the Cisco Network Analysis Module
Traffic Analyzer, Release 4.2Cisco NAM Command Reference, Release 4.2
Copyright Notices for the Cisco Network Analysis Module, Release 4.2
Cisco 2200 Series NAM Appliance Documentation
Quick Start and Documentation Guide for the Cisco 2200 Series NAM Appliance
Installation and Configuration Guide for the Cisco NAM 2204 Appliance
Installation and Configuration Guide for the Cisco NAM 2220 Appliance
Regulatory Compliance and Safety Information for the Cisco NAM 2200 Series Appliances
Cisco NAM Virtual Services Blade Documentation
Installation and Configuration Guide for Cisco Nexus 1010 Network Analysis Module, 4.2
Installation and Configuration Guide for the Cisco WAAS NAM
Virtual Services Blade, 4.2User Guide for the Cisco Network Analysis Module Virtual Services Blades, 4.2
Obtaining Documentation and Submitting a Service Request
Documentation Guide for Cisco Network Analysis Module Software, 4.2
April 2010, 78-19322-01This guide contains the following:
•
Information about the user documentation for the Cisco Network Analysis Module on various platforms, and NAM 4.2 software
•
This document contains the following sections:
•
•
•
•
Introduction
The Cisco Network Analysis Module 4.2 software enables network managers to understand, manage, and improve how applications and services are delivered to end users.
The NAM offers flow-based traffic analysis of applications, hosts, and conversations, performance-based measurements on application, server, and network latency, quality of experience metrics for network-based services such as voice over IP (VoIP) and video, and problem analysis using deep, insightful packet captures.
The Cisco NAM includes an embedded, web-based Traffic Analyzer GUI that provides quick access to the configuration menus and presents easy-to-read performance reports on web for different types of services and traffic including voice and video, response time, and network flow-based reports.
Cisco NAM 4.2 Software Documentation
This section provides a list of the Cisco NAM 4.2 software documentation. You can find links to all NAM software documentation at the following URL:
http://www.cisco.com/en/US/products/sw/cscowork/ps5401/tsd_products
_support_series_home.htmlThe following is a list of the documentation for Cisco Network Analysis Module 4.2 (in the order in which you should address it).
•
•
•
•
You can access the URLs listed for each document on the World Wide Web.
Release Notes for the Cisco Network Analysis Module, Release 4.2
OL-21577-01
The Release Notes for the Cisco Network Analysis Module, 4.2 provide a collection of information including software and hardware compatibility and information about new features, requirements, and anomalies that might exist.
User Guide for the Cisco Network Analysis Module
Traffic Analyzer, Release 4.2OL-21525-01
The User Guide for the Cisco Network Analysis Module Traffic Analyzer, 4.2 describes how to use the Network Analysis Module Traffic Analyzer and NAM 4.2 user software.
http://cisco.com/en/US/docs/net_mgmt/network_analysis_module
_software/4.2/user/guide/nam42_ug.htmlCisco NAM Command Reference, Release 4.2
OL-21728-01
The Cisco NAM Command Reference, Release 4.2 provides information about how to use the NAM command-line interface to manage the NAM devices supported by NAM 4.2 software including:
•
•
•
•
•
•
•
•
•
The Cisco NAM Command Reference, Release 4.2 also supports the following WAAS appliances:
•
•
and the Nexus 1010 Virtual Services Appliance:
•
Copyright Notices for the Cisco Network Analysis Module, Release 4.2
OL-21732-01
The Copyright Notices for the Cisco Network Analysis Module, 4.2 provides a listing of all copyright notices for the open source third-party software used in NAM 4.2.
Cisco 2200 Series NAM Appliance Documentation
This section describes the Cisco 2200 Series NAM Appliance documentation.
Quick Start and Documentation Guide for the Cisco 2200 Series NAM Appliance
78-18440-01
The Quick Start and Documentation Guide for the Cisco 2200 Series NAM Appliance is available online at the following URL:
http://cisco.com/en/US/docs/net_mgmt/network_analysis_module
_appliance/2220/roadmap/docguide.htmlThis document contains a description of the documentation for the NAM appliance and NAM software and information about how to get started with the NAM appliance.
Installation and Configuration Guide for the Cisco NAM 2204 Appliance
OL-14943-01
The Installation and Configuration Guide for the Cisco NAM 2204 Appliance provides information to help you install and configure the NAM 2204 appliance. This guide includes overview information and details about how to install the appliance, connect the appliance to power and the device it monitors, configure the appliance, log in, and get started setting up the appliance to monitor the device.
The Installation and Configuration Guide for the Cisco NAM 2204 Appliance is an online only document you can find at the following URL:
Installation and Configuration Guide for the Cisco NAM 2220 Appliance
OL-16692-01
The Installation and Configuration Guide for the Cisco NAM 2220 Appliance provides information to help you install and configure the NAM 2220 appliance. This guide includes overview information and details about how to install the appliance, connect the appliance to power and the device it monitors, configure the appliance, log in, and get started setting up the appliance to monitor the device.
The Installation and Configuration Guide for the Cisco NAM 2220 Appliance is an online only document you can find at the following URL:
Regulatory Compliance and Safety Information for the Cisco NAM 2200 Series Appliances
78-18308-01
The Regulatory Compliance and Safety Information for the Cisco NAM 2200 Series Appliances is a printed document that ships with the NAM appliance and is also available online at the following URL:
The Regulatory Compliance and Safety Information for the Cisco 2200 Series NAM Appliances contains regulatory compliance and safety information for the Cisco 2200 Series NAM appliances.
Cisco NAM Virtual Services Blade Documentation
The following URL provides links to product support, additional product literature, software, and other helpful information:
http://www.cisco.com/en/US/products/ps10506/index.html
The following document is specific to the Nexus 1010 Virtual Services Appliance:
•
The following document is specific to the Cisco WAAS Network Analysis Module Virtual Services Blade:
•
The following document applies to both platforms:
•
Installation and Configuration Guide for Cisco Nexus 1010 Network Analysis Module, 4.2
OL-21578-01
The Installation and Configuration Guide for Cisco Nexus 1010 Network Analysis Module, 4.2 provides detailed steps to install the NAM VSB on a Cisco Nexus 1010 and configure the NAM VSB.
Installation and Configuration Guide for the Cisco WAAS NAM
Virtual Services Blade, 4.2OL-21830-01
The Installation and Configuration Guide for the Cisco WAAS NAM Virtual Services Blade, 4.2 provides detailed steps to install the NAM VSB on a WAAS appliance, configure the NAM VSB, and generate useful reports to demonstrate the impact of WAAS in a Proof of Concept (POC).
User Guide for the Cisco Network Analysis Module Virtual Services Blades, 4.2
OL-21551-01
The User Guide for the Cisco Network Analysis Module Virtual Services Blades, 4.2 describes how to use the Network Analysis Module Traffic Analyzer and NAM 4.2 user software.
Related Documentation
This section provides information about other documentation related to the Network Analysis Module and Cisco NAM 4.2 software.
NAM-1 and NAM-2
Catalyst 6500 Series Switch and Cisco 7600 Series Router Network Analysis Module
Installation Note, 4.2Catalyst 6500 Series Switch and Cisco 7600 Series Router Network Analysis Module
Installation Note, 4.1Catalyst 6500 Series Switch and Cisco 7600 Series Router Network Analysis Module
Installation Note, 4.0http://www.cisco.com/en/US/docs/net_mgmt/network_analysis_module
_software/4.0/switch/configuration/guide/swinstcfg.htmlCatalyst 6500 Series Switch and Cisco 7600 Series Router Network Analysis Module
Installation Note, 3.6Catalyst 6500 Series Switch and Cisco 7600 Series Router Network Analysis Module
Installation Note. 3.5NME-NAM
Cisco Branch Routers Series Network Analysis Module (NME-NAM-120S) Installation and Configuration Note, 4.2
Cisco Branch Routers Series Network Analysis Module (NME-NAM-120S) Installation and Configuration Note, 4.1
http://www.cisco.com/en/US/docs/net_mgmt/network_analysis_module_software/
4.1/branch_router/configuration/guide/BRincfg_120S.htmlCisco NAM Enhanced Network Modules
http://www.cisco.com/en/US/docs/routers/access/interfaces/nm/hardware/
installation/guide/namnme.htmlInstalling Cisco Network Modules and Service Modules
Cisco 3800 Series Hardware Installation
http://cisco.com/en/US/docs/routers/access/3800/hardware/installation/
guide/hw.htmlCisco 3700 Series Routers Hardware Installation Guide
http://www.cisco.com/en/US/docs/routers/access/3700/hardware/
installation/guide/3700hig.htmlInstalling Network Modules in Cisco 2800 Series Routers
http://www.cisco.com/en/US/docs/routers/access/2800/hardware/
installation/guide/08_hw.htmlObtaining Documentation and Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS Version 2.0.
CCDE, CCENT, CCSI, Cisco Eos, Cisco Explorer, Cisco HealthPresence, Cisco IronPort, the Cisco logo, Cisco Nurse Connect, Cisco Pulse, Cisco SensorBase, Cisco StackPower, Cisco StadiumVision, Cisco TelePresence, Cisco TrustSec, Cisco Unified Computing System, Cisco WebEx, DCE, Flip Channels, Flip for Good, Flip Mino, Flipshare (Design), Flip Ultra, Flip Video, Flip Video (Design), Instant Broadband, and Welcome to the Human Network are trademarks; Changing the Way We Work, Live, Play, and Learn, Cisco Capital, Cisco Capital (Design), Cisco:Financed (Stylized), Cisco Store, Flip Gift Card, and One Million Acts of Green are service marks; and Access Registrar, Aironet, AllTouch, AsyncOS, Bringing the Meeting To You, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, CCVP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Lumin, Cisco Nexus, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Collaboration Without Limitation, Continuum, EtherFast, EtherSwitch, Event Center, Explorer, Follow Me Browsing, GainMaker, iLYNX, IOS, iPhone, IronPort, the IronPort logo, Laser Link, LightStream, Linksys, MeetingPlace, MeetingPlace Chime Sound, MGX, Networkers, Networking Academy, PCNow, PIX, PowerKEY, PowerPanels, PowerTV, PowerTV (Design), PowerVu, Prisma, ProConnect, ROSA, SenderBase, SMARTnet, Spectrum Expert, StackWise, WebEx, and the WebEx logo are registered trademarks of Cisco and/or its affiliates in the United States and certain other countries.
All other trademarks mentioned in this document or website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1002R)
Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.
© 2010 Cisco Systems, Inc. All rights reserved.
