Table Of Contents
Release Notes for the Cisco Mobile Wireless Transport Manager 6.1
Contents
What's New in MWTM 6.1
Supported IOS Releases in MWTM 6.1
Unsupported IOS Releases
Limitations and Restrictions
Provisioning Timeout
SSH-Enabled Nodes
INSTANCE_NUMBER on Single-Instance ITP
Multiprocessor Multithread Vendor Exception
External SSH Client Use
SSH and Telnet Terminal
Trap Configuration for CDT 2.0
Launching Service Managers from MWTM
Tooltip Text Truncated
Credentials for Nodes with Multiple IP Address
Unprintable Characters
Symbol Style and Line Style Preferences
Java Exception
Avoid Colon (:) in ITP Object Names
Unprintable Characters in GUI
Appearance of MSU Rates Real-Time Charts
Provisioning Problem Due to Credentials
Broken Pipe Exceptions
Special Characters in ITP AS/ASP/Linkset Names in Reports
Using MWTM With the RealPlayer Plugin Installed
Online Help System
Important Notes
RAN Backhaul Utilization
New Features and Resolved MWTM Caveats
Open MWTM Caveats
Open Device Caveats
Related Documentation
Obtaining Documentation, Obtaining Support, and Security Guidelines
Release Notes for the Cisco Mobile Wireless Transport Manager 6.1
Date: March, 2009
Last Revised: March 27, 2009
These release notes describe features added, caveats, known bugs, and other important information for installing and using Cisco Mobile Wireless Transport Manager 6.1 (MWTM).
Note 
You can access the most current Cisco documentation, including these release notes, online at:
http://www.cisco.com/en/US/products/ps6472/tsd_products_support_series_home.html
For the latest MWTM information and software updates, go to http://www.cisco.com/go/mwtm.
Contents
These release notes contain:
•What's New in MWTM 6.1
•Limitations and Restrictions
•Important Notes
•New Features and Resolved MWTM Caveats
•Open MWTM Caveats
•Open Device Caveats
•Related Documentation
•Obtaining Documentation, Obtaining Support, and Security Guidelines
What's New in MWTM 6.1
Table 1 lists the new features in MWTM 6.1.
Table 1 New Features in Mobile Wireless Transport Manager 6.1
Feature
|
Description
|
New Device Support
|
•Cisco BWG 1.1 (SAMI and 7301): 12.4(15)XL2
•Cisco CSG2 R1 (SAMI): 12.4(11)MD3, 12.4(11)MD4, 12.4(11)MD5, 12.4(11)MD6
•Cisco CSG2 R2 (SAMI): 12.4(15)MD, 12.4(15)MD1
•Cisco GGSN 8.0 (SAMI): 12.4(15)XQ, 12.4(15)XQ1
•Cisco GGSN 7.0 (MWAM): 12.4(9)XG3
•Cisco GGSN 6.0 (MWAM): 12.4(2)XB10
•Cisco Home Agent 4.0 (SAMI and 7301): 12.4(15)XM1, 12.4(15)XM2
•Cisco Mobile Internet (7600): 12.2(33)SRC1, 12.2(33)SRC2
•Cisco ITP (2811, 7200, 7300): 12.4(15)SW2
•Cisco ITP (7600): 12.2(18)IXF1, 12.2(18)IXG
•Cisco ITP (7600 with SAMI): 12.2(33)IRA, 12.2(33)IRB
•Cisco IPRAN (7600): 12.2(33)SRB3, 12.2(33)SRB4, 12.2(33)SRC1, 12.2(33)SRC2
•Cisco IPRAN (MWR-1941, 3825): 12.4(16)MR2, 12.4(19)MR
•Cisco IPRAN (ONS-RAN-SVC): 12.2(29)SM3, 12.2(29)SM4
•Cisco IPRAN (ONS15454): 7.2.2, 7.2.3
|
Event Monitoring
|
•Cisco GPRS GGSN Service Node: Access Point Name discovery, status monitoring and alarming
•Cisco ITP: New Traps For Q752 Table 4 Item 5 and 6
•Cisco ITP SAMI card: Event monitoring
•All Cisco Mobile Wireless devices: Alarm Management—Shows Events and Timestamps Pertaining to Selected Alarm
•Cisco 7600 router: Event monitoring
•Audio notification upon detection of loss of connection between MWTM server and client
|
Wizard-Based Provisioning
|
•Provides configuration support for Cisco Content Services Gateway and Cisco GPRS GGSN Service Node.
•Batch and group provisioning for Cisco GGSN and Cisco CSG
•Supports configuration of Cisco IPRAN devices (Cisco MWR-1941, Cisco 3825 and Cisco 7600) with strong semantic and syntactic checks for attributes such as pseudowire cross-connects, ATM cell switching and controller configuration.
•Cisco ITP 7600 with SAMI card: Configuration support
|
Performance Reporting
|
•Cisco Mobile Wireless devices: CPU and memory utilization, and interface real-time statistics
•Cisco GPRS Gateway Support Node (GGSN): Real-time usage statistics
•Cisco Home Agent (HA): Real-time usage statistics
•Cisco Broadband Wireless Gateway (BWG): Real-time usage statistics
•Cisco ITP devices: Linkset Reports now includes adjacent instances with point codes and NumLinks.
•Cisco ITP devices: Automatic CSV Export of MSU Rates Reports
•Cisco ITP devices: Enhanced support for CISCO-ITP-XUA MIB
•Cisco ITP devices: ITU Q752 Standard updates for tables 1, 2 and 3 (Link Statistics)
•Cisco ITP 7600 with SAMI card: Performance monitoring and reporting
•Cisco IPRAN: Network-wide reports for RAN-O backhaul and shorthaul statistics
|
Auto-Discovery and Topology
|
•Discovers the entire Cisco Mobile Internet, Cisco IPRAN and RAN Optimization, and Cisco ITP networks; displays each RAN Optimization and ITP network element, neighboring equipment, and physical and logical connectivity in a network topology drawing that you can customize.
|
Troubleshooting
|
•Cisco GGSN: Search for Subscriber by MSISDN
•Cisco Home Agent: Search For Subscriber by Network Access Identifier
•Cisco ITP devices: Troubleshooting tab for AS and SGMP objects
•Cisco ITP 7600 with SAMI card: Troubleshooting support
•Cisco IPRAN devices: Pseudowire support
|
NMS/OSS Integration
|
•Compatible with CiscoWorks LAN Management System (LMS) R3.1
|
Security
|
•Support for multiple user-authentication methods: Pluggable Authentication Modules (PAM), OS-based and standalone
•Optional SSL-based encryption1 between client and server support; optional Secure Shell (SSH) Protocol-based encryption between server and network element
|
Client/Server Architecture and OS Support
|
•Based on client/server architecture, supports Windows and Solaris clients and Solaris and Linux servers and provides data access through a Web browser
|
Supported IOS Releases in MWTM 6.1
This section contains the following tables:
•Table 2, Supported IOS Releases for ITP Devices
•Table 3, Supported IOS Releases for IPRAN Devices
•Table 4, Supported IOS Releases for mSEF Devices
Table 2 Supported IOS Releases for ITP Devices
Device
|
IOS Release
|
7600
|
12.2(18)IXA
12.2(18)IXB2
12.2(18)IXC
12.2(18)IXD1
12.2(18)IXF1
12.2(18)IXG
|
Other1
|
12.2(25)SW4A
12.2(25)SW5
12.2(25)SW6
12.2(25)SW7
12.2(25)SW8
12.2(25)SW9
12.2(25)SW10
12.2(25)SW11
12.2(25)SW12
12.4(11)SW3
12.4(15)SW
12.4(15)SW1
12.4(15)SW2
12.2(33)IRA (for the WS-SVC-SAMI-BB-K9 module)
12.2(33)IRB (for the WS-SVC-SAMI-BB-K9 module)
|
GTT Encoding Scheme Support
|
12.2(25)SW4A or later, or
12.2(18)IXA or later, or
12.4(11)SW or later, or
12.2(33)IRA or later is required.
|
MLR Address Table Configuration Support
|
12.2(25)SW4A or later, or
12.2(18)IXA or later, or
12.4(11)SW or later, or
12.2(33)IRA or later is required.
|
For the GTT Accounting Statistics Reports
|
12.2(25)SW4A or later, or
12.2(18)IXA or later, or
12.4(11)SW or later, or
12.2(33)IRA or later is required.
|
For Route Table and GTT Table Deployment
|
12.2(25)SW4A or later, or
12.2(18)IXA or later, or
12.4(11)SW or later, or
12.2(33)IRA or later is required.
|
For ITP Provisioning
|
12.2(25)SW4A or later, or
12.2(18)IXA or later, or
12.2(33)IRA or later is required
|
For MSU Rates
|
12.2(25)SW7 or later, or
12.2(18)IXB or later, or
12.4(11)SW or later, or
12.2(33)IRA or later is required.
|
Cisco Database for Tecommunications (CDT)
|
2.02
|
Table 3 Supported IOS Releases for IPRAN Devices
Device
|
IOS Release
|
Cell Site Router
|
12.4(12)MR2 (MWR-1941-DC-A only)
12.4(16)MR (MWR-1941-DC-A only)
12.4(16)MR1
12.4(16)MR2
12.4(19)MR
|
RAN-O ONS
|
7.2
7.2.2
7.2.3
|
RAN-O ONS-RAN-SVC
|
12.2(29)SM
12.2(29)SM1
12.2(29)SM2
12.2(29)SM3
12.2(29)SM4
|
MToP 7600
|
12.2(33)SRB3
12.2(33)SRB4
12.2(33)SRC1
12.2(33)SRC2
|
Table 4 Supported IOS Releases for mSEF Devices
Device
|
IOS Release
|
GGSN
|
GGSN 8 on the WS-SVC-SAMI-BB-K9 module:
•12.4(15)XQ
•12.4(15)XQ1
GGSN 7 on the WS-SVC-MWAM-1 module:
•12.4(9)XG2
•12.4(9)XG3
GGSN 6 on the WS-SVC-MWAM-1 module:
•12.4(2)XB7
•12.4(2)XB8
•12.4(2)XB9
•12.4(2)XB10
Supervisor Module:
•12.2(33)SRC1
•12.2(33)SRC2
|
CSG1
|
CSG1 7:
•3.1(3)C7(1)
•3.1(3)C7(2)
•3.1(3)C7(3)
•3.1(3)C7(4)
•3.1(3)C7(5)
•3.1(3)C7(6)
•3.1(3)C7(7)
CSG1 6:
•3.1(3)C6(6)
•3.1(3)C6(7)
•3.1(3)C6(8)
•3.1(3)C6(9)
•3.1(3)C6(10)
|
CSG2
|
CSG2 R2:
•12.4(15)MD
•12.4(15)MD1
CSG2 R1:
•12.4(11)MD3
•12.4(11)MD4
•12.4(11)MD5
•12.4(15)MD6
Supervisor Module:
•12.2(33)SRC1
•12.2(33)SRC2
|
HA
|
HA 4.0:
•12.4(15)XM
•12.4(15)XM1
•12.4(15)XM2
Supervisor Module:
•12.2(33)SRC1
•12.2(33)SRC2
|
BWG
|
12.4(15)XL2 (BWG version 1.1)
Supervisor Module:
•12.2(33)SRC1
•12.2(33)SRC2
|
Unsupported IOS Releases
The MWTM no longer supports the IOS releases listed in Table 5:
Table 5 Unsupported IOS Releases in MWTM 6.1
ITP
|
IPRAN
|
mSEF
|
7600
|
Other
|
GGSN
|
CSG1
|
CSG2
|
HA
|
BWG
|
12.2(18)IXB
12.2(18)IXB1
12.2(18)IXD
12.2(18)IXE
12.2(18)IXF
|
12.2(4)MB4
12.2(4)MB5
12.2(4)MB6
12.2(4)MB7
12.2(4)MB8
12.2(4)MB9
12.2(4)MB9a
12.2(4)MB10
12.2(4)MB11
12.2(4)MB12
12.2(4)MB13
12.2(18)SW
12.2(19)SW
12.2(20)SW
12.2(21)SW
12.2(21)SW1
12.2(23)SW
12.2(23)SW1
12.2(25)SW
12.2(25)SW1
12.2(25)SW2
12.2(25)SW3
12.2(25)SW4
12.4(11)SW
12.4(11)SW1
12.4(11)SW2
|
12.4(9)MR
12.4(11)MR
12.4(12)MR
12.4(12)MR1
|
GGSN 6
12.4(2)XB
12.4(2)XB1
12.4(2)XB2
12.4(2)XB3
12.4(2)XB4
12.4(2)XB5
12.4(2)XB6
GGSN 7
12.4(9)XG
12.4(9)XG1
|
N/A
|
12.4(11)MD
12.4(11)MD1
12.4(11)MD2
|
N/A
|
12.4(15)XL1
(BWG version 1.0)
|
Limitations and Restrictions
This section describes limitations and restrictions that are associated with the MWTM:
•Provisioning Timeout
•SSH-Enabled Nodes
•INSTANCE_NUMBER on Single-Instance ITP
•Multiprocessor Multithread Vendor Exception
•External SSH Client Use
•SSH and Telnet Terminal
•Trap Configuration for CDT 2.0
•Launching Service Managers from MWTM
•Tooltip Text Truncated
•Credentials for Nodes with Multiple IP Address
•Unprintable Characters
•Symbol Style and Line Style Preferences
•Java Exception
•Avoid Colon (:) in ITP Object Names
•Using MWTM With the RealPlayer Plugin Installed
•Online Help System
Provisioning Timeout
When using the MWTM provisioning feature to modify the management interface, sometimes the operation fails with this message:
This response can occur when changing the duplex or speed attributes for the Ethernet interface. The response can also occur for other interface attributes that affect IP connectivity between the MWTM and the device.
The default setting for a provisioning operation timeout is 50 seconds. As a workaround, the system administrator can increase the TGS_OP_TIMEOUT attribute in the System.properties file to a higher value. You must restart the MWTM server for this change to take effect.
SSH-Enabled Nodes
The MWTM Node > Home Page right-click menu option does not work correctly for the following SSH-enabled IP Transfer Point (ITP) nodes:
•Cisco 2600
•Cisco 7200
•Cisco 7300
•Cisco 7500
•Cisco 7600
The browser launches, as expected, but the user is not prompted for login information.
Note This limitation exists for any ITP node running the 12.2(x) IOS with SSH enabled.
INSTANCE_NUMBER on Single-Instance ITP
Symptom If a command with INSTANCE_NUMBER is included in the UserCommands.ts file, the
instance number will appear on all nodes in the GUI. If you run this command on a node that does not
have multi-instance enabled, it fails.
Workaround If you have a network with both single-instance and multi-instance nodes, you must configure a separate set of troubleshooting commands for each node type in the UserCommands.ts file. Do this by grouping the commands for each type under a separate category.
Multiprocessor Multithread Vendor Exception
Sometimes when using the MWTM client on a Solaris multi-processor computer, an exception occurs when the topology window is open and you are manipulating views. The workaround is to close the topology window, then reopen it.
External SSH Client Use
If you enable the MWTM terminal proxy (mwtm termproxy) and use an external SSH terminal client to connect to a device, you might receive a warning message indicating a man-in-the-middle attack. This warning occurs because the MWTM server is operating as an SSH proxy to the device. In this scenario, ignore any warning messages indicating a man-in-the-middle attack. These warnings do not occur if you disable the MWTM terminal proxy or if you use the SSH terminal included with the MWTM.
SSH and Telnet Terminal
The SSH and Telnet terminals that are included with the MWTM provide basic terminal functionality. They do not support non-English character sets or the UNIX curses library (for example, colors). If these, or other, additional terminal functions are required, you can configure the MWTM to use an external SSH or Telnet program.
Trap Configuration for CDT 2.0
CSCsk60334
If you configure Cisco Data Telecommunications (CDT) 2.0 for use with the MWTM, you must set up CDT 2.0 to send traps that conform to Trap Version 2 (V2 style). Do not configure CDT 2.0 to send traps that use Trap Version 1 style.
Launching Service Managers from MWTM
CSCsl17461
When you set the MWTM personalities to manage CSG and GGSN nodes, the MWTM Tools menu provides these launch commands in the MWTM client:
•Tools > CiscoWorks > CSG Service Manager
•Tools > CiscoWorks > GGSN Service Manager
Note In the MWTM web interface, you click CiscoWorks in the navigation tree, then click CSG or GGSN in the right pane to launch the service manager.
When you launch one of these commands, the MWTM attempts to launch the URL of the service manager that resides on the LMS server to which your MWTM client is currently connected. However, if the service manager is not actually installed on the LMS server, you will receive an HTTP 404 error. To prevent this error, ensure that the service managers are installed on the LMS server to which you are connected. Otherwise, you should remove the CSG or GGSN personality setting with the mwtm manage command.
Tooltip Text Truncated
The Firefox 2 browser truncates tool tips that contain long text strings (see Firefox bug 218223). The MWTM contains only a few tool tips that exhibit this problem. The problem is resolved in Firefox 3. The problem does not occur when using the Internet Explorer (IE) browser.
Credentials for Nodes with Multiple IP Address
Credentials for a node are associated with a unique IP address. If a node has more than one accessible IP address, functions that require credentials might not resolve to a credential based on the selected IP address, and the requested function would fail. The MWTM functions that require credentials include:
•Discovery of ONS and RAN_SVC nodes
•Troubleshooting
•Provisioning
•Route, MLR Address, and Global Title Translation (GTT) table deployment
To work around this limitation, specify the credentials for all accessible IP addresses for a node.
Unprintable Characters
CSCse81393
In various GUI and web pages, simple text fields might contain unprintable characters. An example is the Model Name PID field for a RAN service (RAN_SVC) card in an ONS chassis. This is a cosmetic problem and does not affect functionality.
Symbol Style and Line Style Preferences
CSCsg83861
The preferences dialog box of the MWTM client interface allows you to customize the way that data series appear in charts. You can specify series color, line style, and symbol style. However, symbol style and line style preferences do not work when displaying real-time charts for MSU rates and for RAN backhauls and shorthauls.
Java Exception
CSCsh15638
The following exception with corresponding stacktrace can occur. The MWTM captures this exception in the sgmConsoleLog.txt file:
java.net.SocketException: Broken pipe
This exception can occur when users access the MWTM web interface and frequently abort connections while the server is under heavy load (for example, during discovery). Clicking the Stop button on the web browser or navigating to a different web page before the current page finishes loading can cause this exception to occur.
Note The root cause of this condition is an internal bug in the Tomcat web application that ships with this release of the MWTM.
You can safely ignore these log messages.
Avoid Colon (:) in ITP Object Names
CSCsh58070
The following error messages may appear when performing these operations:
Operation
|
Error Message
|
Generating link report by using the sgmLinkStats.sh script
|
sgmgawk: cmd. line:45: (FILENAME=- FNR=???)
fatal: division by zero
|
Attempting to import link and linkset report data
|
ERROR 38000: The exception
'java.sql.SQLException: Invalid character
string format for type SMALLINT.' was thrown
while evaluating an expression.
|
Using the ITP route table deployment function
|
Invalid Linkset in Route Table: [???]
|
These error messages occur when ITP linkset, AS, and ASP names contain a colon (:). To prevent these errors, do not use the colon (:) in ITP linkset, AS, and ASP names.
Note In general, the MWTM does not support ITP AS, ASP, or linkset names that contain special characters, such as: !@#$%^&*()+=[]{};',./\:"<>?|
The supported characters in ITP AS, ASP, and linkset names are: [a-z], [A-Z], [0-9], - and _.
Unprintable Characters in GUI
On some GUI windows and web pages simple text fields might contain unprintable characters. An example is the Model Name PID field for a RAN service (RAN_SVC) card in an ONS chassis. This might occur one some RAN_SVC cards in an ONS chassis.
Appearance of MSU Rates Real-Time Charts
The preferences dialog box of the MWTM client interface allows you to customize the way that data series appear in charts. You can specify series color, line style, and symbol style. However, symbol style and line style preferences do not work when displaying real-time charts for MSU rates and for RAN backhauls and shorthauls.
Provisioning Problem Due to Credentials
After switching the SNMP IP address, provisioning stops working due to credentials. Credentials for a node are associated with a unique IP address. If a node has more than one accessible IP address, functions that require credentials might not resolve to a credential based on the selected IP address, and the requested function would fail. The MWTM functions that require credentials include:
•Discovery of ONS and RAN_SVC nodes
•Troubleshooting
•Provisioning
•Route and Global Title Translation (GTT) table deployment
This might occur with nodes with multiple, accessible IP addresses with credentials set for a subset of those IP addresses. To work around this limitation, specify credentials for all accessible IP addresses for a node.
Broken Pipe Exceptions
An error might occur after sending end packet which results in a broken pipe exception. The following exception with corresponding stacktrace might occur. The MWTM captures this exception in the sgmConsoleLog.txt file:
java.net.SocketException: Broken pipe
This exception might occur when you try to access the MWTM web interface and frequently abort connections while the server is under heavy load (for example, during discovery). Clicking the Stop button on the web browser or navigating to a different web page before the current page finishes loading can cause this exception to occur.
Note The root cause of this condition is an internal bug in the Tomcat web application that ships with this release of the MWTM.
There is no workaround for this limitation, but you can safely ignore these log messages.
Special Characters in ITP AS/ASP/Linkset Names in Reports
The following error messages might appear when performing these operations:
Operation
|
Error Message
|
Generating link report by using the sgmLinkStats.sh script
|
sgmgawk: cmd. line:45: (FILENAME=- FNR=???)
fatal: division by zero
|
Attempting to import link and linkset report data
|
ERROR 38000: The exception
'java.sql.SQLException: Invalid character
string format for type SMALLINT.' was thrown
while evaluating an expression.
|
Using the ITP route table deployment function
|
Invalid Linkset in Route Table: [???]
|
The error messages occur when ITP linkset, AS, and ASP names contain a colon (:). To work around this problem, remove the colon (:) from ITP linkset, AS, and ASP names.
Using MWTM With the RealPlayer Plugin Installed
If you use a computer that has the RealPlayer plugin installed, the Provision launch window will not work properly. When you change types on the Provision launch window, the provisioned item list will not refresh.
This is a known issue with the RealPlayer plugin. This issue occurs on both Internet Explorer and Firefox browsers.
Disable the RealPlayer plugin to use the Provision launch window. If you use Internet Explorer, you might need to reboot your computer after disabling the plugin. If you use Firefox, you might need to restart your browser after disabling the plugin.
Online Help System
The online help system is updated only during major release updates. New features added in patch releases (for example, 6.0.4) are not contained in the online help system. Instead, new features are documented in the release notes for the patch release.
Important Notes
This section contains important notes about RAN Backhaul Utilization.
RAN Backhaul Utilization
When the backhaul utilization for transmit traffic exceeds 100%, the likely cause is oversubscription of the shorthaul links that constitute the backhaul. The backhaul utilization is the amount of traffic that the system attempted to send, not the amount that was actually sent. If utilization is greater than 100%, you should see queue drops or other errors during the same time period. A backhaul utilization of greater than 100% is possible for a heavily loaded link with some occasional oversubscription.
New Features and Resolved MWTM Caveats
The following new features and bugs fixes have been fixed in MWTM 6.1:
Bug ID
|
Description
|
CSCsl80633
|
7600 Support - Generic Devices CPU/Memory Monitoring
|
CSCsl82542
|
7600 Support - Interface Utilization Real-time Statistics
|
CSCsl82688
|
PWE3 - Real-time Client
|
CSCsl82702
|
PWE3 - Provisioning - Server
|
CSCsl82708
|
PWE3 - Provision ATM Cell Switching and TDM DropAndinsert
|
CSCsl82713
|
PWE3 - Fault support on the 7600
|
CSCsl82723
|
PWE3 - Provisioning Support For 7600 (24 port T1/E1 CEOPS)
|
CSCsb91677
|
RAN-O - Network wide reports
|
CSCsi67871
|
RAN-O - ONS-RAN-SVC Traffic CPU Utilization Support
|
CSCsl82611
|
HomeAgent - Real-time Monitoring
|
CSCsl82621
|
HomeAgent - Support For 12.4(15)XM1
|
CSCsl82627
|
HomeAgent - Troubleshooting Support
|
CSCsl82639
|
BWG - Release 1.1 - Real-Time Monitoring - WebClient
|
CSCsl82649
|
BWG - Release 1.1 - Troubleshooting
|
CSCsl88143
|
CSG2 - Provisioning
|
CSCsl85287
|
GGSN 8 - Discovery Support
|
CSCsl85301
|
GGSN 8 - Traps and Alarms Support
|
CSCsl85330
|
GGSN 8 - Web Client Support
|
CSCsl85335
|
GGSN 8 - Client Support
|
CSCsq56371
|
GGSN/MSISDN Subscriber search - Web
|
CSCsq56036
|
GGSN - Batch/Group Provisioning and Deployment
|
CSCsq56040
|
GGSN - Provisioning
|
CSCsq56048
|
APN - Alarms
|
CSCsq57539
|
APN - Discovery and Polling
|
CSCsq58674
|
APN - Tree and Details Tabs for Web Client
|
CSCsq56028
|
APN - Status Monitoring and Inventory
|
CSCso45283
|
ITP - Q752 - Support Missing Link Statistics
|
CSCso45302
|
ITP - Q752 - Support New Traps For Q752
|
CSCsl88124
|
ITP/SAMI - Configuration Support
|
CSCsl88127
|
ITP/SAMI - Statistics Poller Support
|
CSCsl88081
|
ITP/SAMI - Troubleshooting Support
|
CSCso60563
|
System - Autologin After Failover To Backup Server
|
CSCso62522
|
Integration - Support For CiscoWorks LMS 3.1
|
CSCsh47258
|
Alarms - Show Events & Timestamps Pertaining To Selected Alarm
|
CSCso65542
|
ITP/SAMI - Support For 12.2(33)IRA
|
CSCso65550
|
ITP - Support 12.2(33)IRB 12.2(18)IXG 12.4(15)SW2
|
CSCso60766
|
ITP - Update Archived Reports Formats To Document MIB Variables Polled
|
CSCso92787
|
CLI - Support clear Option To mwtm secondary server
|
CSCsq03961
|
RAN-O - Support For 12.4(19)MR and 12.2(29)SM3
|
CSCsq05190
|
System - Raise Alarm if Database Integrity Check Fails
|
CSCsq05835
|
ITP - Improve Performance of Link/MTP3 Accounting/GTT Accounting Reports
|
CSCsq29997
|
RAN - MToP - Support 12.2(33)SRB3, 12.2(33)SRC1
|
CSCsq38336
|
ITP - Updated Support for CISCO-ITP-XUA MIB
|
CSCsq46095
|
RAN - Change Personality from RAN-O to IPRAN to cover MToP/PWE3
|
CSCsq49283
|
ITP - Link and MTP3 Accounting Measurements By Linkset/DPC/OPC Via CLI
|
CSCsq55072
|
PWE3 - Provision PWE3 xconnect on Warlord and CEOPS OC3 Cards
|
CSCsq62133
|
Provisioning: Config Tree: Server
|
CSCsq62141
|
Provisioning: Config Tree: Client
|
CSCsq68678
|
ITP - Support For 12.2(18)IXF1
|
CSCsq86555
|
ITP - Support 12.2(25)SW12
|
CSCsr48985
|
HomeAgent - Support for HA 12.4(15)XM2 IOS Release
|
CSCsr58113
|
GGSN - Support IOS Maintenance Releases of GGSN6, GGSN7, GGSN8
|
CSCsr77511
|
MSEF - Add support for 12.2(33)SRC2
|
CSCsr78768
|
CSG - Support CSG2 R1 MD6 maintenance release
|
CSCso45817
|
HomeAgent - Support For 12.4(15)XM1
|
CSCsr82104
|
BWG - Personality change from ASN-GW
|
CSCsr94992
|
IPRAN - Update PWE3 MIBs to latest versions
|
CSCsu35740
|
RAN-O - Support IOS Release 12.2(29)SM4 on ONS-RAN-SVC
|
CSCso60254
|
CSG2 - Add Support for R1 IOS maintenance releases and CSG2 R2
|
CSCsu57991
|
ITP - Add Adjacent Instance/PointCode and NumLinks to Linkset Reports
|
CSCsl82707
|
Troubleshooting - User Input GUI
|
CSCsk35443
|
ITP - Client - Add Troubleshooting Tab For AS and SGMP Objects
|
CSCsk43356
|
Inventory - Add Serial Number To Columns in Node Summary List
|
CSCsk43378
|
Inventory - IP Address Inventory Report
|
CSCsu69834
|
RAN - MToP - Support 12.2(33)SRB4
|
CSCeh76367
|
ITP - GTT Editor - Prevent Cell Editing in View-only Mode
|
CSCsd81322
|
Client - Add Managed Object Names To Tab Pages
|
CSCsg97941
|
Events - Write XML sgmEvent.conf with Proper Indentation
|
CSCsh14499
|
Events - Add a Function to Lookup the Varbinds of Supported Traps
|
CSCsh71257
|
ITP - GTT/MLR Editors - Dialogs Sometimes Appear Behind Main GUI
|
CSCsi15512
|
ITP - MLR Editor - Add Help Page for Version 1.3 MLR Tables
|
CSCsi26115
|
WebClient - Show Unlimited or Max records Per Web Page
|
CSCsi70857
|
WebClient - Real-Time Updates To Summary Lists In Web Navigation Tree
|
CSCsi86140
|
WebClient - Add Location Bar
|
CSCsj32925
|
Events - Personalities Editor for Event Entries
|
CSCsj40576
|
Client - Support Client-side Sorting in Table Taglib
|
CSCsj43694
|
Events - Sort the Event Config Tree Based on Personality
|
CSCsj64211
|
WebClient - Launch CiscoWorks Device Center and CiscoView
|
CSCsk46514
|
ITP - WebClient - Add Troubleshooting Tab For AS and SGMP objects
|
CSCsk63989
|
Install - Do Not Depend on /usr/ucb/whoami
|
CSCsk64252
|
JavaClient - Quick Find Feature on Main Window
|
CSCsk72958
|
Use the Device Capabilities in clients and deprecate miblevel.
|
CSCsl08788
|
WebClient - Implement ITP Details Tabs to Match Java Client
|
CSCsl11820
|
Poller Engine & Event Engine Changes to Help Easier Development
|
CSCsl20577
|
Security - Support PAM Based Authentication
|
CSCsl63319
|
ITP - JavaClient - Revise CPU presentation for MSU Rates and Performance
|
CSCsl82637
|
BWG Release 1.1 - Real-time Poller
|
CSCsl82679
|
PWE3 - Real-time Poller
|
CSCsl82692
|
PWE3 - Real-time Web Client
|
CSCsl82695
|
Troubleshooting - User Input Server
|
CSCsl82714
|
Troubleshooting - User Input Web
|
CSCsl82724
|
Troubleshooting - Capability Support
|
CSCsl82761
|
Release Train - GUI Client
|
CSCsl82774
|
Release Train - Web Client
|
CSCsl85323
|
GGSN 8 - Server Support
|
CSCsl85348
|
Provisioning Infrastructure - Config Engine Parser
|
CSCsl85352
|
Provisioning Infrastructure - Table Widget GUI
|
CSCsl87995
|
CSG2R2 - Discovery Support
|
CSCsl88004
|
CSG2R2 - Real-time Poller Support
|
CSCsl88007
|
CSG2R2 - Real-time Web Client
|
CSCsl88064
|
GGSN 8 - Troubleshooting Support
|
CSCsl88085
|
CSG2 - Troubleshooting Support
|
CSCsm02877
|
Reports - Support Paging in RAN Reports
|
CSCsm02882
|
RAN Reports need to be added to the main Reports table on the web
|
CSCsm03142
|
RAN Report tables should link object names to objects
|
CSCsm08762
|
Provisioning Infrastructure - Separate directories for different domains
|
CSCsm15694
|
Provisioning Infrastructure - Rework the Provision Choice Screen
|
CSCsm17226
|
BWG - Release 1.1 - Real-time Statistics
|
CSCsm20612
|
HomeAgent - User Search For Subscriber by Network Access Identifier
|
CSCsm20635
|
Install - Check for the ncompress RPM on Linux
|
CSCsm42618
|
Provisioning - Support various widget and provision XML changes - Server
|
CSCsm58535
|
Java client: clean up handling of communication failures
|
CSCsm87916
|
ITP - Automatic CSV Export of MSU Rates Reports
|
CSCsm88094
|
Provisioning Infrastructure - Array Combo box Widget GUI
|
CSCsm92374
|
Provisioning - Support Table Widget Server
|
CSCsm92908
|
Troubleshooting upgrade path
|
CSCsm98650
|
JavaClient - Play Sound With No Popup When Client Loses Connection
|
CSCso00595
|
WebClient - Display Custom/Blank Pulldown For Reports With Custom Time
|
CSCso21012
|
Alarms - Generate Event Archive Files in csv.zip Format Including Alarms
|
CSCso28088
|
System - Export Data Dates In Human Readable Format
|
CSCso29561
|
ITP - WebClient - Revise CPU presentation for MSU Rates and Performance
|
CSCso30919
|
Provisioning - Support developer specified text width
|
CSCso30923
|
Provisioning - Support regular expression in profile XML
|
CSCso40454
|
Provisioning - Support regular expression in profile XML - Client
|
CSCso40458
|
Provision: Provision Launch Button Need to support NESubType - GUI
|
CSCso42656
|
Upgrade: Support 6.0.3/6.0.4 to 6.1
|
CSCso45007
|
Troubleshoot - Maintain prefilled values and commands across web pages
|
CSCso68349
|
Cosmetic Improvements to Interface Performance and Error Tabs
|
CSCso75152
|
ITP - Enhancements to debugging of report scripts
|
CSCsq03545
|
Client - Support Counter Reset Button in WebClient
|
CSCsq32294
|
Troubleshooting enhancement to add suffix to all commands
|
CSCsq34361
|
WebClient - Restore User To Last Page After Reconnecting To Server
|
CSCsq34704
|
Update criteria for objects reported on in the RAN system wide reports
|
CSCsq55079
|
PWE3 - Hide Controller Array Widget When Provisioning IMA on MWR
|
CSCsq55089
|
Troubleshooting: use PWE3 capability in troubleshooting file
|
CSCsq56042
|
Grouping Support for Configuration
|
CSCsq58671
|
Web Client - Play Sound With No Popup When Client Loses Connection
|
CSCsq58677
|
APN Status Monitoring and Inventory - Java Client
|
CSCsq58708
|
APN & GGSN Historical reports - Web Tree Work
|
CSCsq68563
|
GGSN - Batch Provisioning - Web
|
CSCsq70096
|
Alarms - Add Archive Option To Java Event/Alarm GUI
|
CSCsq71053
|
System - Reduce Database Size Used By Reports In Large Networks
|
CSCsq73874
|
Install: On Linux, validate that the OS is RH 4 update 6
|
CSCsq74024
|
WebClient - Preserve Tab Selection During Tree Navigation
|
CSCsq97336
|
TDM Drop & Insert - extra parameter displays in web client
|
CSCsr11758
|
ITP - Use Event Poller To Determine Status of DestStateInaccess Alarms
|
CSCsr23593
|
Provisioning:ITP Implement ConfigTree and Table Wizard in Profiles.
|
CSCsr25722
|
FQDN data model lookup performance improvements for Provisioning
|
CSCsr25807
|
RAN-O: Improve scalability of historical reports and discovery
|
CSCsr25833
|
Provisioning IPRAN:Implemment configTree and Table Wizard in templates.
|
CSCsr25847
|
Provisioning mSEF:Implemment configTree and Table Wizard in templates.
|
CSCsr25856
|
Provisioning:Config Tree Performance Optimization : Server
|
CSCsr25935
|
Provisioning: Config - Add Display Name.
|
CSCsr51683
|
BWG - Remove support for 1.0, add support for 1.1
|
CSCsr68783
|
Add a run interval specification to the eventPoller.xml
|
CSCsr96431
|
Provisioning:Hide non-provisionable objects in the config tree.
|
CSCsu62536
|
Provision launch from Java Client should open to provision config tree
|
CSCsu87512
|
IPRAN - MToP - Add support for backup peer and delay subcommands
|
CSCsu87522
|
IPRAN - MToP - Add support for additional GRE Tunnel subcommands
|
CSCsu93922
|
IPRAN - MToP - Add support for 7600 CEMClass 'payload-size' parameter
|
CSCsu95454
|
OSS Integration Guide related code changes
|
CSCsu95617
|
Copyright - Update customer-facing GUI and docs
|
CSCsv14933
|
Update help
|
CSCsv15061
|
Install - Remove CMX SM install scripts
|
CSCsv30226
|
CSG2 Real time stats on web shows inconsistent format for values
|
CSCsv40698
|
Add Alarm Guide link to the home page
|
CSCsj01970
|
Allow sort by name on main GUI tree
|
CSCsj27333
|
Trap Event Configuration Screen Has Cramped Text Components
|
CSCsk93373
|
Provision web pages have incorrect help links
|
CSCsl02911
|
Personalities in event editor need to be cleaned up
|
CSCsl10665
|
Negative if speed values for sonet if on an OC48 card in ONS
|
CSCsl68270
|
v 4.4 gtt file should not be deployed to IOS not supporting 4.4
|
CSCsm74015
|
Make sure Personality for Event Editor and MIB listing web page match
|
CSCso10003
|
Asian language setting makes unreadable characters in notes
|
CSCso53385
|
Help: Incorrect help link for Active Alarms table
|
CSCso58037
|
Web reports throw exception when DB is empty
|
CSCso70413
|
RAN-O: BH Capacity Summary 15 min. report displays incorrect average
|
CSCso82845
|
Summary List Count Msg Panel does not use properties
|
CSCsq19887
|
DB - Derby exception due to DB locking and timing issues
|
CSCsq22400
|
Java client: troubleshooting input modal to main window
|
CSCsq22533
|
RAN-O Web reports set to Duration All do not display data
|
CSCsq46576
|
MToP: Classify 7600 running PWE3 as appropriate technology
|
CSCsq48283
|
RAN alarms not displayed after device delete/re-discover
|
CSCsr28068
|
Alarms - RouteMgmtState Alarm Does Not Reliably Clear
|
CSCsr51634
|
ITP-SAMI: CPU numbering in CPU-PROCESS-MIB is broken with 12.2(33)IRA
|
CSCsr63577
|
Performance tab: Show CPU Utilization report by default
|
CSCsr65948
|
Provision: media-type sfp invalid option for GE interface
|
CSCsu60295
|
Usability - Admin Web Screens
|
CSCsu65073
|
Web display of sgmCommandLog needs to be paged
|
CSCsu93324
|
ALARMS: Some alarms are not re-raised after object is deleted
|
CSCsu97840
|
Use monospace font for troubleshooting output pages
|
CSCsv05300
|
Concurrently running reports can cause side effects in each other
|
CSCsv07288
|
Node Credentials Editor displays IP address rather than name for dual-homed
|
CSCsv15253
|
Alarms: Alarm logging has incorrect alarm id
|
CSCsv24782
|
Support nullcaps/nonullcaps in Linkset Reports
|
CSCsv28431
|
Disable Invalid Chunk Warning Messages In Console Log from Tomcat
|
Open MWTM Caveats
This section describes caveats that exist in the MWTM 6.1 software.
•CSCsg92892
Symptom When provisioning ITP nodes from the Provision tab of the web interface, some provisioning
operations might fail on the node with these symptoms and conditions:
Provisioning Action
|
Symptom
|
Condition
|
Changing the media type for FastEthernet or GigabitEthernet interface
|
|
FastEthernet or GigabitEthernet on the node does not support the media type configuration option, but the user specified a media type in the MWTM provisioning request.
|
Changing speed for FastEthernet or GigabitEthernet interface
|
|
FastEthernet or GigabitEthernet on the node does not support the speed configuration option, but the user specified the speed in the MWTM provisioning request.
|
Configuring MTP3 User Adaptation (M3UA) or SCCP User Adaptation (SUA) offload, or Local Peer offload
|
Error: at least one
address must reside
on slot xx
|
The user specified an IP address that does not exist for the specified card slot.
|
Configuring M3UA or SUA offload, or Local Peer offload
|
Error: XXX is
already offloaded
to this linecard
slot=xx
|
The user specified a target card slot that is already in use by another M3UA or SUA offload, or Local Peer offload.
Note The ITP does not allow mixed types between M3UA or SUA offload, and Local Peer offload.
|
Configuring the line priority for the clock source line option on the Cisco 2600 T1/E1 controller
|
% Invalid input
detected at '^'
marker.
The '^' marker points to the line priority: primary or secondary.
|
While configuring the clock source line priority option on the T1/E1 controller, the user specified the primary or secondary option on the line, but the WAN Interface Card (WIC) card has only one port, and does not support the line priority option.
|
Configuring the secondary line priority for the clock source line option on the Cisco 7xxx ITP T1/E1 controller
|
% Invalid input
detected at '^'
marker.
The '^' marker points to the secondary line priority: primary or secondary.
|
When configuring the clock source secondary line priority option on the T1/E1 controller, the user specified a number that is greater than the supported range on the device. Although the MWTM allows values 1-72, some cards only support 1-8 or 1-16.
|
Workaround None. The user must know the ITP card information and specify correct values in the provisioning request.
•CSCsu02993
Symptom When IOS running-config contains the following characters in the object name, MWTM web
user interface may exhibit unexpected behavior:
Double quote (")
Less than (<)
Conditions When IOS running-config contains following characters in the object name:
Double quote (")
Less than (<)
Additional MWTM provisioning or other functions may behave unexpectedly when IOS running-config contains following characters:
!,@,#,$,%,^,*,(,),_, and -
Workaround Remove special characters from IOS running-config.
Open Device Caveats
This section documents caveats associated with the devices that the MWTM manages. These caveats can affect the capability of the MWTM to manage the associated features. Follow the guidelines in the workarounds for these defects.
•CSCsg77152
Symptom When you configure the following parameter for an SCTP link:
retransmit-cwnd-rate <rate> sctp-fast-retransmit
the sctp-fast-retransmit portion is not saved in the configuration, and is ignored at the next reload.
Conditions Tune the sctp-fast-retransmit parameter for retransmit-cwnd-rate.
Workaround Reconfigure the parameter after reloading the device.
•CSCsh13017
Symptom The MWTM login credentials might not work if you run the no enable secret command on the
active RAN Service (RAN SVC) Module.
Conditions During failover, the running configuration on the active RAN service card merges with the RAN protection card. As a result, any baseline configuration command that exists on the protection card but not on the active card will be applied.
Workaround For all RAN service cards:
•Apply the enable-secret configuration option.
•Define these credentials in the MWTM.
Related Documentation
Use this document in conjunction with the following documents:
•User Guide for the Cisco Mobile Wireless Transport Manager 6.1
http://cisco.com/en/US/docs/net_mgmt/mobile_wireless_transport_manager/6.1/user/guide/
mwtmug.html
•Installation Guide for the Cisco Mobile Wireless Transport Manager 6.1
http://cisco.com/en/US/docs/net_mgmt/mobile_wireless_transport_manager/6.1/installation/guide/mwtmig.html
•OSS Integration Guide for the Cisco Mobile Wireless Transport Manager 6.1
http://cisco.com/en/US/docs/net_mgmt/mobile_wireless_transport_manager/6.1/developer/guide/mwtmoss.html
•Supported IOS Releases for the Cisco Mobile Wireless Transport Manager and the Cisco Signaling Gateway Manager
http://cisco.com/en/US/docs/net_mgmt/mobile_wireless_transport_manager/6.1/ios_support/
release/IOS_comp.html
Obtaining Documentation, Obtaining Support, and Security Guidelines
For information on obtaining documentation, obtaining support, providing documentation feedback, security guidelines, and also recommended aliases and general Cisco documents, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
This document is to be used in conjunction with the documents listed in the "Related Documentation" section.
CCDE, CCENT, Cisco Eos, Cisco HealthPresence, the Cisco logo, Cisco Lumin, Cisco Nexus, Cisco StadiumVision, Cisco TelePresence, Cisco WebEx, DCE, and Welcome to the Human Network are trademarks; Changing the Way We Work, Live, Play, and Learn and Cisco Store are service marks; and Access Registrar, Aironet, AsyncOS, Bringing the Meeting To You, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, CCVP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Collaboration Without Limitation, EtherFast, EtherSwitch, Event Center, Fast Step, Follow Me Browsing, FormShare, GigaDrive, HomeLink, Internet Quotient, IOS, iPhone, iQuick Study, IronPort, the IronPort logo, LightStream, Linksys, MediaTone, MeetingPlace, MeetingPlace Chime Sound, MGX, Networkers, Networking Academy, Network Registrar, PCNow, PIX, PowerPanels, ProConnect, ScriptShare, SenderBase, SMARTnet, Spectrum Expert, StackWise, The Fastest Way to Increase Your Internet Quotient, TransPath, WebEx, and the WebEx logo are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.
All other trademarks mentioned in this document or website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0812R)
Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.
© 2009 Cisco Systems, Inc. All rights reserved.
Feedback
