-
User Guide for the Cisco Mobile Wireless Transport Manager 6.1.6
-
Preface
-
Configuring Security
-
Overview
-
Getting Started
-
Basic Operations
-
Setting Up Your Server
-
Managing Views
-
Understanding Detailed Object Functions
-
Understanding Basic Object Functions
-
Managing Alarms and Events
-
Viewing Network Topology
-
Accessing Data from the Web Interface
-
Viewing Administrative Information from the Web Interface
-
Managing Reports
-
Editing an ITP Route Table File
-
Editing an ITP Global Title Translation Table
-
Editing ITP MLR Address Table Files
-
Client Object Map Reference
-
Command Reference
-
FAQS
-
Troubleshooting the MWTM and the Network
-
Status Definitions
-
MIB Reference
-
Trap Reference
-
Configuring MWTM to Run with Various Networking Options
-
MWTM Ports
-
Glossary
-
Index
-
Feedback
Table Of Contents
Understanding Basic Object Functions
Right-Click Menu for All Objects
Application Server Processes Table
Application Server Process Associations Table
Signaling Gateway Mated Pairs Table
Editing Properties for a RAN-O Backhaul
Deleting an Object from Your Network
Deleting an Object from the MWTM Database
Deleting a Node from the MWTM Discovery Dialog
Unmanaging and Managing Nodes or ITP Signaling Points
Excluding Nodes or ITP Signaling Points from a View
Ignoring and Unignoring Objects
Understanding Basic Object Functions
You can use the Cisco Mobile Wireless Transport Manager (MWTM) to view basic information about any discovered MWTM object, including its associated objects, status, and other important information.
To view basic information for an object, click Summary Lists in the navigation tree of the MWTM main window, then select one of these objects:
Note
Objects only appear if your network contains that particular object type.
This chapter contains:
•
•
•
Displaying Object Windows
To display an object window, in the MWTM main window, under Summary Lists in the navigation tree, click the object type. The object window appears in the right pane.
Example:
To display the nodes table, choose Summary Lists > Nodes. The nodes table appears.
•
•
•
Tip
Object windows provide information about all objects of a specific type that the MWTM has discovered and can contain:
•
•
•
•
Right-Click Menu for All Objects
To see the right-click menu for all objects, in the MWTM main window, under Summary Lists in the navigation tree, select the object type and right-click it. The right-click menu contains:
Note
Node Distributions Table
The Node Distributions link displays the percentage distribution summary lists. To display the Node Distributions table, choose Summary Lists > Node Distributions. The available distribution display options are:
•
•
•
•
Node Distributions By Type
To display the Node Distributions by Type table, use the following procedure:
Step 1
Step 2
Step 3
).
The Node Distribution by Type table contains:
Type
Description of the hardware platform that supports a feature. See the description of Node Type in Nodes Table for more information.
Total (total number of nodes)
Total number of nodes of a particular type.
Percentage
Percentage of nodes of this type out of all the discovered nodes.
Node Distributions By Feature
To display the Node Distributions by Feature table, use the following procedure:
Step 1
Step 2
Step 3
The Node Distribution by Feature table contains:
Node Distributions By Software Version
To display the Node Distributions by Software Version table, use the following procedure:
Step 1
Step 2
Step 3
The Node Distribution by Software Version table contains:
Node Distributions By Severity
To display the Node Distributions by Severity table, use the following procedure:
Step 1
Step 2
Step 3
The Node Distribution by Severity table contains:
Severity
Indicates the alarm severity for the chosen node. The severity can be Critical, Major, Minor, Warning, Informational, Indeterminate, Unmanaged, or Normal. See Managing Alarms and Events, page 9-1 for more information.
Total (total number of nodes)
Total number of nodes of a particular severity.
Percentage
Percentage of nodes of this type out of all the discovered nodes.
Note
Nodes Table
The nodes table displays information about nodes that the MWTM has discovered.
You can view the following links under Summary Lists > Nodes in web interface:
Note
To display the nodes table, choose Summary Lists > Nodes.
Note
The nodes table contains:
Internal ID
Internal ID of the node. The internal ID is a unique ID for every object, which the MWTM assigns for its own internal use. This ID can also be useful when the TAC is debugging problems.
Display Name
Name of the node.
This column is displayed by default.
Custom Name
Custom name of the node.
IP Address or DNS Hostname
IP address or DNS name of the node, as the MWTM discovered it.
SysName
System name of the node.
Primary SNMP Address
IP address of the node, which SNMP uses to poll the node. (There might be other IP addresses on the node that are not the primary SNMP address).
This column is displayed by default.
CLLI Code (ITP only)
Common Language Location Identification code for the node. A CLLI code is a standardized 11-character identifier that uniquely identifies the geographic location of the node. If the node has no CLLI code configured, this field is blank.
Node Type
Description of the hardware platform that supports a feature.
ITP Node Types
•
•
•
•
•
•
IPRAN Node Types
•
–
–
–
•
•
•
•
•
•
mSEF Node Types
•
•
•
Other Node Types
•
•
•
•
This column is displayed by default.
Feature
Primary function performed by a node type:
•
•
•
–
–
–
–
–
•
–
–
–
–
–
–
–
–
–
•
•
This column is displayed by default.
Software Version
Version of node's software.
This column is displayed by default.
Avg. MWTM Poll Response (secs)
Average response time for the device to respond to poll from the MWTM server.
Serial Number
Serial number of the node.
Uptime
Time the node has been up, in days, hours, minutes, and seconds.
This column is displayed by default.
Reboot Reason
Reason for the last reboot of the node.
Ignored
Indicates whether to include the signaling point when aggregating and displaying MWTM status information. This field is read-only for the web client, but editable in the Java client.
Users with authentication level Network Operator (level 3) and higher can edit this field. Users with authentication level Power User (level 2) and higher can edit the Unignore field.
This column is displayed by default.
Process Traps
Indicates whether the MWTM should process traps from this node. This field is read-only for the web client, but editable in the Java client.
Trap Polling
Indicates whether or not trap polling is enabled for this node. By default, trap polling is enabled for all nodes except for IP-RAN nodes. This field is read-only for the web client, but editable in the Java client.
For IP-RAN nodes, you can modify this setting by using the following commands:
•
•
Note
Report Polling
Indicates whether or not report polling is enabled for this node. This field is read-only for the web client, but editable in the Java client for ITP nodes.
For IP-RAN nodes, you can modify this setting by using the following commands:
•
•
For all other nodes, this field is not editable.
Notes
Indicates whether a note is associated with the node.
This column is displayed by default.
Events
(MWTM client only)Indicates whether the node has received any events. If the node has received an event, an icon appears in the table cell. Clicking the icon clears the event and takes you to the Recent Events tab for the node.
Severity
Indicates the alarm severity for the chosen node. The severity can be Critical, Major, Minor, Warning, Informational, Indeterminate, Unmanaged, or Normal. See Managing Alarms and Events, page 9-1 for more information.
This column is displayed by default.
Last Status Change
Date and time that the status of the node last changed.
Status
Current status of the node. Possible values are:
•
•
•
•
•
•
•
For detailed definitions of each status, see Appendix E, "Status Definitions."
This column is displayed by default.
Status Reason
Reason for the current status of the node.
For a full list of possible reasons, see the stateReasons.html file. If you installed the MWTM in:
•
•
If the cell is too small to show all of the status reason, place the cursor over the cell to see the full text in a tooltip.
The status reasons appear in order of decreasing magnitude. If two or more reasons apply, the reason of greatest magnitude appears first.
If the status reason is Unsupported Configuration, correct the configuration and enter the mwtm cleandiscover command to delete all current network data and begin a discovery of the network. If the status reason remains Unsupported Configuration, enter the mwtm clean command to restore the MWTM server to a state that would exist after a new installation of the MWTM, excluding the log files, which the MWTM retains. To also remove the log files, enter the mwtm cleanall command. For more information on the use of these commands, see Appendix B, "Command Reference".
This column is displayed by default.
Note
Alarms
The alarms table displays a count of alarms by node and severity. To display the Alarms table, choose Summary Lists > Nodes > Alarms.
In Java client, to display the Alarms table, choose Summary Lists > Alarms.
Note
The alarms table contains:
Uptime
The Uptime link displays the uptime for managed nodes. To display the Uptime for Managed Nodes table, choose Summary Lists > Nodes > Uptime.
The uptime for managed nodes table contains:
Internal ID
Internal ID of the node. The internal ID is a unique ID for every object, which the MWTM assigns for its own internal use. This ID can also be useful when the TAC is debugging problems.
Name
Name of the node.
This column is displayed by default.
Node Type
Description of the hardware platform that supports a feature. See the description of Node Type in Nodes Table for more information.
This column is displayed by default.
Feature
Primary function performed by a node type:
•
•
•
–
–
–
–
–
•
–
–
–
–
–
–
–
–
–
•
•
This column is displayed by default.
Uptime
Time the node has been up, in days, hours, minutes, and seconds.
This column is displayed by default.
Reboot Reason
Reason for the last reboot of the node.
This column is displayed by default.
Severity
Indicates the alarm severity for the chosen node. The severity can be Critical, Major, Minor, Warning, Informational, Indeterminate, Unmanaged, or Normal. See Managing Alarms and Events, page 9-1 for more information.
This column is displayed by default.
Note
Nodes by Alarm
This section contains:
Config Download Alarms
The Config Download Alarms link displays the Nodes for Alarm ConfigurationDownload table. To display this table, choose Summary Lists > Nodes > Configuration Download Alarms.
Note
The table displays the same columns as that of Nodes Table, but the columns Status and Status Reason are hidden by default. See Nodes Table.
Note
SNMP Timeout Alarms
The SNMP Timeout Alarms link displays the Nodes for Alarm NodeUnreachable table. To display this table, choose Summary Lists > Nodes > SNMP Timeout Alarms.
Note
The table displays the same columns as that of Nodes Table, but the columns Status and Status Reason are hidden by default. See Nodes Table.
Note
Software Versions
The Software Versions table lists the software versions for each node the MWTM manages. To display the Software Versions table, choose Summary Lists > Nodes > Software Versions.
In Java client, to display the Software Versions table choose Summary Lists > Software Versions.
The Software Versions table contains:
For details on the Software Versions table, see Displaying Software Versions, page 11-20.
Serial Numbers
The serial numbers table displays information about serial numbers of the nodes that the MWTM has discovered. To display the serial numbers table, choose Summary Lists > Nodes > Serial Numbers.
In Java client, to display the Serial Numbers table choose Summary Lists > Serial Numbers.
Note
The serial numbers table contains:
Note
Signaling Points Table
The signaling points table displays information about the signaling points that the MWTM has discovered. To display the signaling points table, choose Summary Lists > Signaling Points.
Note
The signaling points table contains:
Internal ID
Internal ID of the signaling point. The internal ID is a unique ID for every object, which the MWTM assigns for its own internal use. It can also be useful when the TAC is debugging problems.
Name
Name of the signaling point.
This column is displayed by default.
Node
Name of the node associated with this signaling point.
This column is displayed by default.
Instance Number
Number of the instance associated with the signaling point.
Network Name
Name of the instance associated with the signaling point.
This column is displayed by default.
Point Code
Primary point code of the signaling point.
This column is displayed by default.
Variant
SS7 protocol variant. Valid variants are:
•
•
•
•
•
This column is displayed by default.
Network Indicator
Determines the type of call that is being placed. Valid values are:
•
•
•
•
This column is displayed by default.
Ignored
Indicates whether to include the signaling point when aggregating and displaying MWTM status information. This field is read-only for the web client, but editable in the Java client.
Users with authentication level Network Operator (level 3) and higher can edit this field. Users with authentication level Power User (level 2) and higher can edit the Unignore field.
This column is displayed by default.
Notes
Indicates whether a note is associated with the signaling point.
This column is displayed by default.
Events (MWTM client only)
Indicates whether the signaling point has received any events. If the signaling point has received an event, an icon appears in the table cell. Clicking the icon clears the event and takes you to the Recent Events tab for the signaling point.
Severity
Indicates the alarm severity for the chosen signaling point. The severity can be Critical, Major, Minor, Warning, Informational, Indeterminate, Unmanaged, or Normal. See Managing Alarms and Events, page 9-1 for more information.
This column is displayed by default.
Last Status Change
Date and time that the status of the signaling point last changed.
Status
Current status of the signaling point. Possible values are:
•
•
•
•
For detailed definitions of each status, see Appendix E, "Status Definitions".
This column is displayed by default.
Status Reason
Reason for the current status of the signaling point.
For a full list of possible reasons, see the stateReasons.html file. If you installed the MWTM in:
•
•
If the cell is too small to show all of the status reason, place the cursor over the cell to see the full status reason in a mouse over help popup.
The status reasons are listed in order of decreasing magnitude. If two or more reasons apply, the reason of greatest magnitude appears.
If the status reason is Unsupported Configuration, correct the configuration and enter the mwtm cleandiscover command to delete all current network data and begin a discovery of the network. If the status reason remains Unsupported Configuration, enter the mwtm clean command to restore the MWTM server to a state that would exist after a new installation of the MWTM, excluding the log files, which the MWTM retains. To also remove the log files, enter the mwtm cleanall command. For more information on the use of these commands, see Appendix B, "Command Reference".
This column is displayed by default.
Note
Linksets Table
The linksets table displays information about the linksets that the MWTM has discovered. To display the linksets table, choose Summary Lists > Linksets.
Tip
Note
The linksets table contains:
Internal ID
Internal ID of the linkset. The internal ID is a unique ID for every object, which the MWTM assigns for its own internal use. It can also be useful when the TAC is debugging problems.
Name
Name of the linkset.
This column is displayed by default.
Node
Node associated with the linkset.
Signaling Point
Signaling point associated with the linkset.
Local Point Code
Point code of the primary signaling point for the linkset.
This column is displayed by default.
Adjacent Pt Code
Point code of the adjacent signaling point for the linkset.
This column is displayed by default.
Linkset Type
Type of linkset, which the MWTM determines by examining the links defined in the linkset. Possible linkset types are:
•
•
•
•
•
Note
•
This column is displayed by default.
Links
Total number of links in the linkset.
This column is displayed by default.
Active Links
Number of links in the linkset that are Active.
This column is displayed by default.
Congested Links
Number of links in the linkset that are Congested.
Ignored
Indicates whether to include the signaling point when aggregating and displaying MWTM status information. This field is read-only for the web client, but editable in the Java client.
Users with authentication level Network Operator (level 3) and higher can edit this field. Users with authentication level Power User (level 2) and higher can edit the Unignore field.
This column is displayed by default.
Notes
Indicates whether a note is associated with the linkset.
This column is displayed by default.
Events (MWTM client only)
Indicates whether the linkset has received any events. If the linkset has received an event, an icon appears in the table cell. Clicking the icon clears the event and takes you to the Recent Events tab for the linkset.
Severity
Indicates the alarm severity for the chosen linkset. The severity can be Critical, Major, Minor, Warning, Informational, Indeterminate, Unmanaged, or Normal. See Managing Alarms and Events, page 9-1 for more information.
This column is displayed by default.
Last Status Change
Date and time that the status of the linkset last changed.
Status
Current status of the linkset. Possible values are:
•
•
•
•
•
For detailed definitions of each status, see Appendix E, "Status Definitions".
This column is displayed by default.
Status Reason
Reason for the current status of the signaling gateway-mated pair.
For a full list of possible reasons, see the stateReasons.html file. If you installed the MWTM in:
•
•
If the cell is too small to show all of the status reason, place the cursor over the cell to see the full text in a tooltip.
The status reasons are listed in order of decreasing magnitude. If two or more reasons apply, the reason of greatest magnitude appears first.
If the status reason is Unsupported Configuration, correct the configuration and enter the mwtm cleandiscover command to delete all current network data and begin a discovery of the network. If the status reason remains Unsupported Configuration, enter the mwtm clean command to restore the MWTM server to a state that would exist after a new installation of the MWTM, excluding the log files, which the MWTM retains. To also remove the log files, enter the mwtm cleanall command. For more information on the use of these commands, see Appendix B, "Command Reference".
This column is displayed by default.
Note
Links Table
The links table displays information about the links that the MWTM has discovered. To display the links table, choose Summary Lists > Links.
Note
The links table contains:
Internal ID
Internal ID of the link. The internal ID is a unique ID for every object, which the MWTM assigns for its own internal use. This ID can also be useful when the TAC is debugging problems.
Node
Name of the node associated with the link.
This column is displayed by default.
Signaling Point
Name of the signaling point associated with the link.
This column is displayed by default.
Linkset
Name of the linkset associated with the link.
This column is displayed by default.
SLC
Signaling link code (SLC) ID for the link.
This column is displayed by default.
Type
Type of link. Possible link types are:
•
•
•
•
This column is displayed by default.
Slot
Slot number. The column displays a proper value only when the link is offloaded to a PA line card or a SAMI line card. Otherwise it displays N/A.
Bay
Number of bays. The column displays a proper value only when the link is offloaded to a PA line card. Otherwise it displays N/A.
Processor
Number of processors. The column displays a proper value only when the link is offloaded to a SAMI line card. Otherwise it displays N/A.
Congestion Level
Indicates the level of congestion on the link. A link is congested if it has too many packets waiting to be sent. This condition could result from the failure of an element in your network.
Possible values for the Congestion Level field are None, indicating no congestion, and 1 to 3, indicating levels of congestion from very light (1) to very heavy (3).
Ignored
Indicates whether to include the signaling point when aggregating and displaying MWTM status information. This field is read-only for the web client, but editable in the Java client.
Users with authentication level Network Operator (level 3) and higher can edit this field. Users with authentication level Power User (level 2) and higher can edit the Unignore field.
This column is displayed by default.
Notes
Indicates whether a note is associated with the link.
This column is displayed by default.
Events (MWTM client only)
Indicates whether the link has received any events. If the link has received an event, an icon appears in the table cell. Clicking the icon clears the event and takes you to the Recent Events tab for the link.
Severity
Indicates the alarm severity for the chosen link. The severity can be Critical, Major, Minor, Warning, Informational, Indeterminate, Unmanaged, or Normal. See Managing Alarms and Events, page 9-1 for more information.
This column is displayed by default.
Last Status Change
Date and time that the status of the link last changed.
Status
Current status of the link. Possible values are:
•
•
•
•
•
•
•
•
For detailed definitions of each status, see Appendix E, "Status Definitions".
This column is displayed by default.
Status Reason
Reason for the current status of the signaling gateway-mated pair.
For a full list of possible reasons, see the stateReasons.html file. If you installed the MWTM in:
•
•
If the cell is too small to show all of the status reason, place the cursor over the cell to see the full text in a tooltip.
The status reasons appear in order of decreasing magnitude. If two or more reasons apply, the reason of greatest magnitude appears first.
If the status reason is Unsupported Configuration, correct the configuration and enter the mwtm cleandiscover command to delete all current network data and begin a discovery of the network. If the status reason remains Unsupported Configuration, enter the mwtm clean command to restore the MWTM server to a state that would exist after a new installation of the MWTM, excluding the log files, which the MWTM retains. To also remove the log files, enter the mwtm cleanall command. For more information on the use of these commands, see Appendix B, "Command Reference".
This column is displayed by default.
Note
Application Servers Table
The application servers table displays information about the application servers that the MWTM has discovered. To display the application servers table, choose Summary Lists > App. Servers.
Note
The application servers table contains:
Internal ID
Internal ID of the application server. The internal ID is a unique ID for every object, that the MWTM assigns for its own internal use. This ID can also be useful when the TAC is debugging problems.
Name
Name of the application server.
This column is displayed by default.
Node
Name of the node associated with the application server.
This column is displayed by default.
Signaling Point
Name of the signaling point associated with the application server.
This column is displayed by default.
Protocol
Protocol associated with the application server. Possible values are:
•
•
Routing Key
Routing key associated with the application server. The application server bases its routing decisions on the routing key value.
Traffic Mode
Method by which the application server forwards requests to its active application server processes. Possible values are:
•
•
•
•
•
Application Server Process Associations
Total number of application server processes associated with the application server.
This column is displayed by default.
Active ASP Associations
Number of currently active application server processes associated with the application server.
This column is displayed by default.
Ignored
Indicates whether to include the signaling point when aggregating and displaying MWTM status information. This field is read-only for the web client, but editable in the Java client.
Users with authentication level Network Operator (level 3) and higher can edit this field. Users with authentication level Power User (level 2) and higher can edit the Unignore field.
This column is displayed by default.
Notes
Indicates whether a note is associated with the application server.
This column is displayed by default.
Events (MWTM client only)
Indicates whether the application server has received any events. If the application server has received an event, an icon appears in the table cell. Clicking the icon clears the event and takes you to the Recent Events tab for the application server.
Severity
Indicates the alarm severity for the chosen application server. The severity can be Critical, Major, Minor, Warning, Informational, Indeterminate, Unmanaged, or Normal. See Managing Alarms and Events, page 9-1 for more information.
This column is displayed by default.
Last Status Change
Date and time that the status of the application server last changed.
Status
Current status of the application server. Possible values are:
•
•
•
•
•
•
•
For detailed definitions of each status, see Appendix E, "Status Definitions".
This column is displayed by default.
Status Reason
Reason for the current status of the signaling gateway-mated pair.
For a full list of possible reasons, see the stateReasons.html file. If you installed the MWTM in:
•
•
If the cell is too small to show all of the status reason, place the cursor over the cell to see the full text in a tooltip.
The status reasons are listed in order of decreasing magnitude. If two or more reasons apply, the reason of greatest magnitude appears first.
If the status reason is Unsupported Configuration, correct the configuration and enter the mwtm cleandiscover command to delete all current network data and begin a discovery of the network. If the status reason remains Unsupported Configuration, enter the mwtm clean command to restore the MWTM server to a state that would exist after a new installation of the MWTM, excluding the log files, which the MWTM retains. To also remove the log files, enter the mwtm cleanall command. For more information on the use of these commands, see Appendix B, "Command Reference".
This column is displayed by default.
Note
Application Server Processes Table
The application server processes table displays information about the application server processes that the MWTM has discovered. To display the application server processes table, choose Summary Lists > App. Server Processes.
Note
The application server processes table contains:
Internal ID
Internal ID of the application server process. The internal ID is a unique ID for every object, that the MWTM assigns for its own internal use. This ID can also be useful when the TAC is debugging problems.
Name
Name of the application server process.
This column is displayed by default.
Node
Name of the node associated with the application server process.
This column is displayed by default.
Local IP Address
Local IP address that the application server process is currently using.
This column is displayed by default.
Local Port
Local port number that the application server process is currently using.
This column is displayed by default.
Ignored
Indicates whether to include the signaling point when aggregating and displaying MWTM status information. This field is read-only for the web client, but editable in the Java client.
Users with authentication level Network Operator (level 3) and higher can edit this field. Users with authentication level Power User (level 2) and higher can edit the Unignore field.
This column is displayed by default.
Notes
Indicates whether a note is associated with the application server process.
This column is displayed by default.
Events (MWTM client only)
Indicates whether the application server process has received any events. If the application server process has received an event, an icon appears in the table cell. Clicking the icon clears the event and takes you to the Recent Events tab for the application server process.
Severity
Indicates the alarm severity for the chosen application server process. The severity can be Critical, Major, Minor, Warning, Informational, Indeterminate, Unmanaged, or Normal. See Managing Alarms and Events, page 9-1 for more information.
This column is displayed by default.
Last Status Change
Date and time that the status of the application server process last changed.
Status
Current status of the application server process. Possible values are:
•
•
For detailed definitions of each status, see Appendix E, "Status Definitions".
This column is displayed by default.
Status Reason
Reason for the current status of the application server process.
For a full list of possible reasons, see the stateReasons.html file. If you installed the MWTM in:
•
•
If the cell is too small to show all of the status reason, place the cursor over the cell to see the full text in a tooltip.
The status reasons are listed in order of decreasing magnitude. If two or more reasons apply, the reason of greatest magnitude appears first.
If the status reason is Unsupported Configuration, correct the configuration and enter the mwtm cleandiscover command to delete all current network data and begin a discovery of the network. If the status reason remains Unsupported Configuration, enter the mwtm clean command to restore the MWTM server to a state that would exist after a new installation of the MWTM, excluding the log files, which the MWTM retains. To also remove the log files, enter the mwtm cleanall command. For more information on the use of these commands, see Appendix B, "Command Reference".
This column is displayed by default.
Note
Application Server Process Associations Table
The application server process associations table displays information about the application server process associations that the MWTM has discovered. To display the application server process associations table, choose Summary Lists > App. Server Proc. Assoc.
Note
The application server process associations table contains:
Internal ID
Internal ID of the application server process association. The internal ID is a unique ID for every object, that the MWTM assigns for its own internal use. The ID can also be useful to TAC when troubleshooting problems.
Name
Name of the application server process association.
This column is displayed by default.
Node
Name of the node associated with the application server process association.
This column is displayed by default.
Signaling Point
Name of the signaling point associated with the application server process association.
This column is displayed by default.
Application Server
Name of the application server associated with the application server process association.
This column is displayed by default.
Slot
Slot number. The column displays a proper value only when the ASPA is offloaded to a PA line card or a SAMI line card. Otherwise it displays N/A.
Bay
Bay number. The column displays a proper value only when the ASPA is offloaded to a PA line card. Otherwise it displays N/A.
Processor
Processor number. The column displays a proper value only when the ASPA is offloaded to a SAMI line card. Otherwise it displays N/A.
Protocol
Protocol associated with the application server process association. Possible values are:
•
•
This column is displayed by default.
Congestion Level
Indicates the level of congestion of an application server process association. An application server process association is congested if it has too many packets waiting to be sent. This condition could result from the failure of an element in your network.
Possible values for the Congestion Level field are None, indicating no congestion, and 1 to 7, indicating levels of congestion from very light (1) to very heavy (7).
Ignored
Indicates whether to include the signaling point when aggregating and displaying MWTM status information. This field is read-only for the web client, but editable in the Java client.
Users with authentication level Network Operator (level 3) and higher can edit this field. Users with authentication level Power User (level 2) and higher can edit the Unignore field.
This column is displayed by default.
Notes
Indicates whether a note is associated with the application server process association.
This column is displayed by default.
Events (MWTM client only)
Indicates whether the application server process association has received any events. If the application server process association has received an event, an icon appears in the table cell. Clicking the icon clears the event and takes you to the Recent Events tab for the application server process association.
Severity
Indicates the alarm severity for the chosen application server process association. The severity can be Critical, Major, Minor, Warning, Informational, Indeterminate, Unmanaged, or Normal. See Managing Alarms and Events, page 9-1 for more information.
This column is displayed by default.
Last Status Change
Date and time that the status of the application server process association last changed.
Status
Current status of the application server process association. Possible values are:
•
•
•
•
•
•
•
•
For detailed definitions of each status, see Appendix E, "Status Definitions".
This column is displayed by default.
Status Reason
Reason for the current status of the application server process association.
For a full list of possible reasons, see the stateReasons.html file. If you installed the MWTM in:
•
•
If the cell is too small to show all of the status reason, place the cursor over the cell to see the full text in a tooltip.
The status reasons are listed in order of decreasing magnitude. If two or more reasons apply, the reason of greatest magnitude appears first.
If the status reason is Unsupported Configuration, correct the configuration and enter the mwtm cleandiscover command to delete all current network data and begin a discovery of the network. If the status reason remains Unsupported Configuration, enter the mwtm clean command to restore the MWTM server to a state that would exist after a new installation of the MWTM, excluding the log files, which the MWTM retains. To also remove the log files, enter the mwtm cleanall command. For more information on the use of these commands, see Appendix B, "Command Reference".
This column is displayed by default.
Signaling Gateway Mated Pairs Table
The signaling gateway-mated pairs table displays information about the signaling gateway-mated pairs that the MWTM has discovered. To display the signaling gateway-mated pairs table, choose Summary Lists > Signaling Gateway Mated Pairs.
Note
The signaling gateway-mated pairs table contains:
Internal ID
Internal ID of the signaling gateway-mated pair. The internal ID is a unique ID for every object, that the MWTM assigns for its own internal use. The ID can also be useful to TAC when troubleshooting problems.
Name
Name of the signaling gateway-mated pair.
This column is displayed by default.
Mate
Name of the node associated with the mate of the signaling gateway-mated pair.
This column is displayed by default.
Node
Name of the node associated with the signaling gateway-mated pair.
This column is displayed by default.
Congestion Level
Indicates the congestion level of a signaling gateway-mated pair. A signaling gateway-mated pair is congested if it has too many packets waiting to be sent. This condition could result from the failure of an element in your network.
Possible values for the Congestion Level field are None, indicating no congestion, and 1 to 7, indicating levels of congestion from very light (1) to very heavy (7).
Ignored
Indicates whether to include the signaling point when aggregating and displaying MWTM status information. This field is read-only for the web client, but editable in the Java client.
Users with authentication level Network Operator (level 3) and higher can edit this field. Users with authentication level Power User (level 2) and higher can edit the Unignore field.
This column is displayed by default.
Notes
Indicates whether a note is associated with the signaling gateway-mated pair.
This column is displayed by default.
Events (MWTM client only)
Indicates whether the signaling gateway-mated pair has received any events. If the signaling gateway-mated pair has received an event, an icon appears in the table cell. Clicking the icon clears the event and takes you to the Recent Events tab for the signaling gateway-mated pair.
Severity
Indicates the alarm severity for the chosen signaling gateway-mated pair. The severity can be Critical, Major, Minor, Warning, Informational, Indeterminate, Unmanaged, or Normal. See Managing Alarms and Events, page 9-1 for more information.
This column is displayed by default.
Last Status Change
Date and time that the status of the signaling gateway-mated pair last changed.
Status
Current status of the signaling gateway-mated pair. Possible values are:
•
•
•
•
•
•
For detailed definitions of each status, see Appendix E, "Status Definitions".
This column is displayed by default.
Status Reason
Reason for the current status of the signaling gateway-mated pair.
For a full list of possible reasons, see the stateReasons.html file. If you installed the MWTM in:
•
•
If the cell is too small to show all of the status reason, place the cursor over the cell to see the full text in a tooltip.
The status reasons are listed in order of decreasing magnitude. If two or more reasons apply, the reason of greatest magnitude appears first.
If the status reason is Unsupported Configuration, correct the configuration and enter the mwtm cleandiscover command to delete all current network data and begin a discovery of the network. If the status reason remains Unsupported Configuration, enter the mwtm clean command to restore the MWTM server to a state that would exist after a new installation of the MWTM, excluding the log files, which the MWTM retains. To also remove the log files, enter the mwtm cleanall command. For more information on the use of these commands, see Appendix B, "Command Reference".
This column is displayed by default.
Note
Interfaces Table
The interfaces table displays information about the ITP or RAN interfaces that the MWTM has discovered. To display the interfaces table, choose Summary Lists > Interfaces.
Note
The interfaces table contains:
Internal ID
Internal ID of the interface. The internal ID is a unique ID for every object, that the MWTM assigns for its own internal use. The ID can also be useful to TAC when troubleshooting problems.
Name
Name of the interface. The node specifies the name of the interface.
This column is displayed by default.
Node
Name of the node with the interface.
This column is displayed by default.
Interface Type
Type of interface.
Send Speed
Interface send speed in bits per second.
This column is displayed by default.
Receive Speed
Interface receive speed in bits per second.
This column is displayed by default.
Interface Index
Unique numeric identifier of the interface. This identifier appears in the interface table (ifTable).
This column is displayed by default.
Interface Description
Description of the interface. This field displays N/A if the Interface Description is blank for the particular node.
Maximum Packet Size
The maximum packet size that traverses the interface in bytes.
Physical Address
The physical address of the interface. If a physical address does not apply to the interface, N/A appears in the table cell.
Ignored
Indicates whether to include the signaling point when aggregating and displaying MWTM status information. This field is read-only for the web client, but editable in the Java client.
Users with authentication level Network Operator (level 3) and higher can edit this field. Users with authentication level Power User (level 2) and higher can edit the Unignore field.
This column is displayed by default.
Notes
Indicates whether a note is associated with the interface.
This column is displayed by default.
Events (MWTM client only)
Indicates whether the interface has received any events. If the interface has received an event, an icon appears in the table cell. Clicking the icon clears the event and takes you to the Recent Events tab for the interface.
Severity
Indicates the alarm severity for the chosen interface. The severity can be Critical, Major, Minor, Warning, Informational, Indeterminate, Unmanaged, or Normal. See Managing Alarms and Events, page 9-1 for more information.
This column is displayed by default.
Last Status Change
Date and time that the status of the interface last changed.
Status
Current status of the interface. Possible values are:
•
•
•
•
•
•
For detailed definitions of each status, see Appendix E, "Status Definitions".
This column is displayed by default.
Admin Status
Desired state of the interface:
•
•
•
•
For detailed definitions of each status, see Appendix E, "Status Definitions".
This column is displayed by default.
Oper. Status
Current operational state of the interface:
•
•
•
•
•
•
•
For detailed definitions of each status, see Appendix E, "Status Definitions".
This column is displayed by default.
Status Reason
Reason for the current status of the interface.
For a full list of possible reasons, see the stateReasons.html file. If you installed the MWTM in:
•
•
If the cell is too small to show all of the status reason, place the cursor over the cell to see the full text in a tooltip.
The status reasons are listed in order of decreasing magnitude. If two or more reasons apply, the reason of greatest magnitude appears first.
If the status reason is Unsupported Configuration, correct the configuration and enter the mwtm cleandiscover command to delete all current network data and begin a discovery of the network. If the status reason remains Unsupported Configuration, enter the mwtm clean command to restore the MWTM server to a state that would exist after a new installation of the MWTM, excluding the log files, which the MWTM retains. To also remove the log files, enter the mwtm cleanall command. For more information on the use of these commands, see Appendix B, "Command Reference".
This column is displayed by default.
Note
Cards Table
The cards table displays information about the cards in the ONS 15454 IPRAN node that the MWTM has discovered. To display the cards table, choose Summary Lists > Cards.
Note
The cards table contains:
Internal ID
Internal ID of the card. The internal ID is a unique ID for every object, that the MWTM assigns for its own internal use. The ID can also be useful to TAC when troubleshooting problems.
Name
Name of the card. The node specifies the name of the card.
This column is displayed by default.
Node
Name of the node in which the card resides.
This column is displayed by default.
Card Type
Type of the card in the node.
This column is displayed by default.
Model Name
Model name of the card (can include the part number).
Description
Description of the card.
Slot Number
The slot number of the card in the node.
Ignored
Indicates whether to include the signaling point when aggregating and displaying MWTM status information. This field is read-only for the web client, but editable in the Java client.
Users with authentication level Network Operator (level 3) and higher can edit this field. Users with authentication level Power User (level 2) and higher can edit the Unignore field.
This column is displayed by default.
Notes
Indicates whether a note is associated with the card.
This column is displayed by default.
Events (MWTM client only)
Indicates whether the card has received any events. If the card has received an event, an icon appears in the table cell. Clicking the icon clears the event and takes you to the Recent Events tab for the card.
Severity
Indicates the alarm severity for the chosen card. The severity can be Critical, Major, Minor, Warning, Informational, Indeterminate, Unmanaged, or Normal. See Managing Alarms and Events, page 9-1 for more information.
This column is displayed by default.
Last Status Change
Date and time that the status of the card last changed.
Status
Current status of the card. Possible values are:
•
•
•
•
•
•
For detailed definitions of each status, see Appendix E, "Status Definitions".
This column is displayed by default.
Status Reason
Reason for the current status of the card.
For a full list of possible reasons, see the stateReasons.html file. If you installed the MWTM in:
•
•
If the cell is too small to show all of the status reason, place the cursor over the cell to see the full text in a tooltip.
The status reasons are listed in order of decreasing magnitude. If two or more reasons apply, the reason of greatest magnitude appears first.
If the status reason is Unsupported Configuration, correct the configuration and enter the mwtm cleandiscover command to delete all current network data and begin a discovery of the network. If the status reason remains Unsupported Configuration, enter the mwtm clean command to restore the MWTM server to a state that would exist after a new installation of the MWTM, excluding the log files, which the MWTM retains. To also remove the log files, enter the mwtm cleanall command. For more information on the use of these commands, see Appendix B, "Command Reference".
Hardware Version
Hardware version of the card.
Firmware Version
Firmware version of the card.
Software Version
Software version of the card.
Note
RAN Backhauls Table
The RAN backhauls table displays information about the RAN backhauls that the MWTM has discovered. To display the RAN backhauls table, choose Summary Lists > RAN Backhauls.
Note
The RAN backhauls table contains:
Internal ID
Internal ID of the RAN backhaul. The internal ID is a unique ID for every object, that the MWTM assigns for its own internal use. The ID can also be useful to TAC when troubleshooting problems.
Name
Name of the RAN backhaul.
This column is displayed by default.
Node
Name of the node on which this RAN backhaul resides.
This column is displayed by default.
Location
Location of the node (either at the cell site or the aggregation node site).
This column is displayed by default.
Peer Name
Name of the object's peer.
This column is displayed by default.
Peer Node
Name of the node to which the peer object belongs.
This column is displayed by default.
Type
Indicates whether the RAN backhaul is a normal backhaul or a virtual backhaul (see Creating Virtual RAN Backhauls, page 7-145).
User Send Bandwidth
The bandwidth that the user specified for the backhaul. Values for send and receive bandwidths will be different if the interface is asymmetrical. To change this value, see Editing Properties for a RAN-O Backhaul.
User Receive Bandwidth
System Send Bandwidth
The bandwidth that the system specifies for the backhaul. Values for send and receive bandwidths will be different if the interface is asymmetrical.
System Receive Bandwidth
Ignored
Indicates whether to include the signaling point when aggregating and displaying MWTM status information. This field is read-only for the web client, but editable in the Java client.
Users with authentication level Network Operator (level 3) and higher can edit this field. Users with authentication level Power User (level 2) and higher can edit the Unignore field.
This column is displayed by default.
Notes
Indicates whether a note is associated with the RAN backhaul.
This column is displayed by default.
Events (MWTM client only)
Indicates whether the RAN backhaul has received any events. If the RAN backhaul has received an event, an icon appears in the table cell. Clicking the icon clears the event and takes you to the Recent Events tab for the RAN backhaul.
Severity
Indicates the alarm severity for the chosen RAN backhaul. The severity can be Critical, Major, Minor, Warning, Informational, Indeterminate, Unmanaged, or Normal. See Managing Alarms and Events, page 9-1 for more information.
This column is displayed by default.
Last Status Change
Date and time that the status of the RAN backhaul last changed.
Status
Current status of the RAN backhaul. Possible values are:
•
•
•
For detailed definitions of each status, see Appendix E, "Status Definitions".
This column is displayed by default.
Status Reason
Reason for the current status of the RAN backhaul.
For a full list of possible reasons, see the stateReasons.html file. If you installed the MWTM in:
•
•
If the cell is too small to show all of the status reason, place the cursor over the cell to see the full text in a tooltip.
The status reasons are listed in order of decreasing magnitude. If two or more reasons apply, the reason of greatest magnitude appears first.
If the status reason is Unsupported Configuration, correct the configuration and enter the mwtm cleandiscover command to delete all current network data and begin a discovery of the network. If the status reason remains Unsupported Configuration, enter the mwtm clean command to restore the MWTM server to a state that would exist after a new installation of the MWTM, excluding the log files, which the MWTM retains. To also remove the log files, enter the mwtm cleanall command. For more information on the use of these commands, see Appendix B, "Command Reference".
This column is displayed by default.
Accept Threshold1
The percentage threshold setting below which the backhaul is considered acceptable.
Warning Threshold1
The percentage threshold setting beyond which the backhaul issues a warning. Subsequent warnings are issued only if the value goes below the Acceptable Threshold.
Overload Threshold1
The percentage threshold setting beyond which the backhaul is considered overloaded. Subsequent overload messages are issued only if the value goes below the Warning Threshold.
1 To change the default setting, see Editing Properties for a RAN-O Backhaul.
Note
RAN Shorthauls Table
The RAN shorthauls table displays information about the RAN shorthauls that the MWTM has discovered. To display the RAN shorthauls table, choose Summary Lists > RAN Shorthauls.
Note
The RAN shorthauls table contains:
Internal ID
Internal ID of the RAN shorthaul. The internal ID is a unique ID for every object, that the MWTM assigns for its own internal use. The ID can also be useful to TAC when troubleshooting problems.
Name
Name of the RAN shorthaul.
This column is displayed by default.
Node
Name of the node to which the RAN shorthaul is connected.
This column is displayed by default.
Type
Type of shorthaul, either GSM or UMTS.
This column is displayed by default.
Optimized
Whether or not the traffic is optimized.
This column is displayed by default.
Location
Location of the node (either at the cell site or the aggregation node site).
This column is displayed by default.
Peer Name
Name of the object's peer.
This column is displayed by default.
Peer Node
Name of the node to which the peer object belongs.
This column is displayed by default.
Interface Type
Type of interface (for example, a point-to-point interface or an ATM interface).
Send Speed
Send speed of the interface in bits per second (for example, 1.98M).
Receive Speed
Receive Speed of the interface in bits per second (for example, 1.98M).
Interface Index
Unique numeric identifier of the interface. This identifier appears in the interface table (ifTable).
Maximum Packet Size (bytes)
Maximum packet size on the interface in bytes.
Physical Address
Physical address, if applicable, of the interface.
Ignored
Indicates whether to include the signaling point when aggregating and displaying MWTM status information. This field is read-only for the web client, but editable in the Java client.
Users with authentication level Network Operator (level 3) and higher can edit this field. Users with authentication level Power User (level 2) and higher can edit the Unignore field.
This column is displayed by default.
Notes
Indicates whether a note is associated with the RAN shorthaul.
This column is displayed by default.
Events (MWTM client only)
Indicates whether the RAN shorthaul has received any events. If the RAN shorthaul has received an event, an icon appears in the table cell. Clicking the icon clears the event and takes you to the Recent Events tab for the RAN shorthaul.
Severity
Indicates the alarm severity for the chosen RAN shorthaul. The severity can be Critical, Major, Minor, Warning, Informational, Indeterminate, Unmanaged, or Normal. See Managing Alarms and Events, page 9-1 for more information.
This column is displayed by default.
Last Status Change
Date and time that the status of the shorthaul last changed.
Status
Current status of the RAN shorthaul.
For detailed definitions of each status, see Appendix E, "Status Definitions".
This column is displayed by default.
Admin Status
Desired state of the interface:
•
•
•
•
For detailed definitions of each status, see Appendix E, "Status Definitions".
Operational Status
Current operational state of the interface:
•
•
•
•
•
•
•
For detailed definitions of each status, see Appendix E, "Status Definitions".
Status Reason
Reason for the current status of the RAN shorthaul.
For a full list of possible reasons, see the stateReasons.html file. If you installed the MWTM in:
•
•
If the cell is too small to show all of the status reason, place the cursor over the cell to see the full text in a tooltip.
The status reasons are listed in order of decreasing magnitude. If two or more reasons apply, the reason of greatest magnitude appears first.
If the status reason is Unsupported Configuration, correct the configuration and enter the mwtm cleandiscover command to delete all current network data and begin a discovery of the network. If the status reason remains Unsupported Configuration, enter the mwtm clean command to restore the MWTM server to a state that would exist after a new installation of the MWTM, excluding the log files, which the MWTM retains. To also remove the log files, enter the mwtm cleanall command. For more information on the use of these commands, see Appendix B, "Command Reference".
This column is displayed by default.
Note
PWE3 Backhauls Table
The PWE3 Backhauls table displays information about the PWE3 backhauls that the MWTM has discovered. A PWE3 backhaul is an object created for the logical grouping of PWE3 virtual circuits on a given node that have the same remote peer.
To display the PWE3 backhauls table, choose Summary Lists > PWE3 Backhauls.
Note
The PWE3 Backhauls table contains:
Internal ID
Internal ID of the PWE3 backhaul. The internal ID is a unique ID for every object, that the MWTM assigns for its own internal use. The ID can also be useful to TAC when troubleshooting problems.
Name
Name of the PWE3 backhaul.
This column is displayed by default.
Node
Name of the node on which this PWE3 backhaul resides.
This column is displayed by default.
Peer Name
Name of the object's peer.
This column is displayed by default.
Peer Node
Name of the node to which the peer object belongs.
This column is displayed by default.
Ignored
Indicates whether to include the signaling point when aggregating and displaying MWTM status information. This field is read-only for the web client, but editable in the Java client.
Users with authentication level Network Operator (level 3) and higher can edit this field. Users with authentication level Power User (level 2) and higher can edit the Unignore field.
This column is displayed by default.
Notes
Indicates whether a note is associated with the PWE3 backhaul.
This column is displayed by default.
Events
(MWTM client only)Indicates whether the PWE3 backhaul has received any events. If the PWE3 backhaul has received an event, an icon appears in the table cell. Clicking the icon clears the event and takes you to the Recent Events tab for the PWE3 backhaul.
Severity
Indicates the alarm severity for the chosen PWE3 backhaul. The severity can be Critical, Major, Minor, Warning, Informational, Indeterminate, Unmanaged, or Normal. See Managing Alarms and Events, page 9-1 for more information.
This column is displayed by default.
Last Status Change
Date and time that the status of the PWE3 backhaul last changed.
Status
Current status of the PWE3 backhaul. Possible values are:
•
•
•
This column is displayed by default.
Status Reason
Reason for the current status of the PWE3 backhaul.
For a full list of possible reasons, see the stateReasons.html file. If you installed the MWTM in:
•
•
If the cell is too small to show all of the status reason, place the cursor over the cell to see the full text in a tooltip.
The status reasons are listed in order of decreasing magnitude. If two or more reasons apply, the reason of greatest magnitude appears first.
If the status reason is Unsupported Configuration, correct the configuration and enter the mwtm cleandiscover command to delete all current network data and begin a discovery of the network. If the status reason remains Unsupported Configuration, enter the mwtm clean command to restore the MWTM server to a state that would exist after a new installation of the MWTM, excluding the log files, which the MWTM retains. To also remove the log files, enter the mwtm cleanall command. For more information on the use of these commands, see Appendix B, "Command Reference".
This column is displayed by default.
Note
PWE3 Virtual Circuits Table
The PWE3 virtual circuits table displays information about the PWE3 virtual circuits that the MWTM has discovered. To display the PWE3 virtual circuits table, choose Summary Lists > PWE3 Virtual Circuits.
Note
The PWE3 virtual circuits table contains:
Internal ID
Internal ID of the PWE3 virtual circuit. The internal ID is a unique ID for every object, that the MWTM assigns for its own internal use.
Name
Name of the PWE3 virtual circuits.
This column is displayed by default.
Node
Name of the node on which this PWE3 virtual circuits resides.
This column is displayed by default.
Peer Name
Name of the object's peer.
This column is displayed by default.
Peer Node
Name of the node to which the peer object belongs.
This column is displayed by default.
Type
Indicates the service to be carried over this virtual circuit type.
PSN Type
Packet Switched Network (PSN) type on which this virtual circuit is carried.
This column is displayed by default.
ID
Virtual circuit identifier.
Primary
Indicates whether the virtual circuit is primary. A virtual circuit that services traffic is considered primary. A virtual circuit that provides redundancy is not primary.
This column is displayed by default.
Remote Interface String
If provided by the protocol, displays the interface description of the remote side of the virtual circuit.
Description
Each virtual circuit is associated to an interface in the ifTable of the node as part of the service configuration. If specified, this field displays the description of the interface.
Ignored
Indicates whether to include the signaling point when aggregating and displaying MWTM status information. This field is read-only for the web client, but editable in the Java client.
Users with authentication level Network Operator (level 3) and higher can edit this field. Users with authentication level Power User (level 2) and higher can edit the Unignore field.
This column is displayed by default.
Notes
Indicates whether a note is associated with the PWE3 virtual circuits.
This column is displayed by default.
Events
(MWTM client only)Indicates whether the PWE3 virtual circuits have received any events. If the PWE3 virtual circuits have received an event, an icon appears in the table cell. Clicking the icon clears the event and takes you to the Recent Events tab for the PWE3 virtual circuits.
Severity
Indicates the alarm severity for the chosen PWE3 virtual circuits. The severity can be Critical, Major, Minor, Warning, Informational, Indeterminate, Unmanaged, or Normal. See Managing Alarms and Events, page 9-1 for more information.
This column is displayed by default.
Last Status Change
Date and time that the status of the virtual circuit last changed.
Status
Current status of the PWE3 virtual circuits. Possible values are:
•
•
•
•
This column is displayed by default.
Admin Status
Desired state of the interface:
•
•
•
•
For detailed definitions of each status, see Appendix E, "Status Definitions".
Oper Status
Indicates the actual combined operational status of this virtual circuit. Oper Status is up if both Inbound Oper Status and Outbound Oper Status are in the up state.
•
•
For detailed definitions of each status, see Appendix E, "Status Definitions".
Inbound Oper Status
Indicates the actual operational status of this virtual circuit in the inbound direction.
Outbound Oper Status
Indicates the actual operational status of this virtual circuit in the outbound direction.
Status Reason
Reason for the current status of the virtual circuits.
For a full list of possible reasons, see the stateReasons.html file. If you installed the MWTM in:
•
•
If the cell is too small to show all of the status reason, place the cursor over the cell to see the full text in a tooltip.
The status reasons are listed in order of decreasing magnitude. If two or more reasons apply, the reason of greatest magnitude appears first.
If the status reason is Unsupported Configuration, correct the configuration and enter the mwtm cleandiscover command to delete all current network data and begin a discovery of the network. If the status reason remains Unsupported Configuration, enter the mwtm clean command to restore the MWTM server to a state that would exist after a new installation of the MWTM, excluding the log files, which the MWTM retains. To also remove the log files, enter the mwtm cleanall command. For more information on the use of these commands, see Appendix B, "Command Reference".
This column is displayed by default.
Note
Access Point Names Table
The Access Point Names (APN) table displays information about the APNs the MWTM has discovered. To display the Access Point Names table, choose Summary Lists > Access Point Names.
Note
The Access Point Names table contains:
Internal ID
Not shown by default, the Internal ID of the APN is a unique ID for every object the MWTM assigns for its own internal use. The ID can also be useful to TAC when troubleshooting problems.
Name
Name of the APN node.
This column is displayed by default.
Ignored
Indicates whether to include the signaling point when aggregating and displaying MWTM status information. This field is read-only for the web client, but editable in the Java client.
Users with authentication level Network Operator (level 3) and higher can edit this field. Users with authentication level Power User (level 2) and higher can edit the Unignore field.
This column is displayed by default.
Notes
Indicates whether a note is associated with the APN.
This column is displayed by default.
Severity
Indicates the alarm severity for the chosen APN. The severity can be Critical, Major, Minor, Warning, Informational, Indeterminate, Unmanaged, or Normal. See Managing Alarms and Events, page 9-1 for more information.
This column is displayed by default.
Last Status Change
Date and time that the status of the access point name last changed.
Status
Current status of the access point names. Possible values are:
•
•
•
•
This column is displayed by default.
Status Reason
Reason for the current status of the access point names.
For a full list of possible reasons, see the stateReasons.html file. If you installed the MWTM in:
•
•
If the cell is too small to show all of the status reason, place the cursor over the cell to see the full text in a tooltip.
The status reasons are listed in order of decreasing magnitude. If two or more reasons apply, the reason of greatest magnitude appears first.
If the status reason is Unsupported Configuration, correct the configuration and enter the mwtm cleandiscover command to delete all current network data and begin a discovery of the network. If the status reason remains Unsupported Configuration, enter the mwtm clean command to restore the MWTM server to a state that would exist after a new installation of the MWTM, excluding the log files, which the MWTM retains. To also remove the log files, enter the mwtm cleanall command. For more information on the use of these commands, see Appendix B, "Command Reference".
This column is displayed by default.
Note
IP Addresses Table
You can view current IP Addresses reports using the MWTM. You can also export the reports.
IP Addresses Statistics
To display the IP Address report table, choose Summary Lists > IP Addresses.
The IP Addresses table is sorted based on the information in the Node column. However, you can sort the table based on the information in any of the columns (see Navigating Table Columns, page 4-23).
The IP Addresses table contains:
Node
Name or IP address of the node.
To see more information for the node, click the node name.
Note
This column is displayed by default.
IP Address
IP address of the node.
This column is displayed by default.
Last Regular Poll Interval
The last time this node was polled.
This column is displayed by default.
SNMP Pollable
Whether the node can be polled by SNMP (yes or no).
This column is displayed by default.
IP Address Type
Indicates whether the IP address displayed is the primary or secondary IP address for the device.
1 To sort the column in descending order, click the column heading. Click again to sort the list in ascending order.
Note
Point Code Table
You can view current point code reports using the MWTM. You can also export the reports.
Point Code Statistics
The Point Codes page shows all point codes that are currently being used by all nodes that the MWTM detected. To display the Point Code table, choose Summary Lists > Point Code.
The Point Code table is sorted based on the information in the Node column. However, you can sort the table based on the information in any of the columns (see Navigating Table Columns, page 4-23).
Note
Editing Properties
In the Edit Properties dialog box you can change the basic properties associated with these objects:
•
•
•
•
•
In the MWTM web interface, to edit node's properties, select Edit Properties option from the Actions menu in the Details tab of the node. See MWTM: Edit Properties Dialog, page 11-11.
To edit a node's properties, right-click the node in the Node table in the right pane or in a view in the navigation tree, and choose Edit > Properties in the right-click menu. The MWTM displays the Edit Properties dialog box, which contains:
Name
Name of the object.
•
•
•
You can also use this field to specify a new, more meaningful name for the node or ITP signaling point. Remember that:
•
•
•
•
•
•
When you click Save, all MWTM windows are updated automatically to reflect the new name.
Connect Address (Nodes only)
Connect IP address to pass to the Telnet or SSH command.
A new Telnet or SSH IP address must use the x.x.x.x format, where x is between 0 and 255, and must contain only numbers and periods, but no letters or special characters. If you enter a Telnet or SSH IP address that contains any letters or special characters, the MWTM beeps and retains the current IP address.
Connection Protocol
Connection protocol to use. You cannot modify this field.
Connect Port (Nodes only)
Port to be used with the protocol specified in the Connector Protocol field. The default values are:
•
•
Icon Name
Drop-down menu of graphic icons to assign to this object in topology maps. The MWTM automatically assigns an appropriate icon to each discovered node and to Unknown nodes; but, you can use this field to assign a different icon (for example, if you know that a given Unknown node is a mobile switching center).
Note
When the MWTM discovers a single-instance node, it assigns the icon that corresponds to the node. When the MWTM discovers a multi-instance node, it assigns a separate icon for each unique instance.
Icon names include the following:
•
•
•
•
•
•
•
•
•
•
Icon Name
(continued)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
When you click Save, the topology window is updated automatically to reflect the new icon.
Interface Structure
Drop-down menu to configure the way the MWTM displays the physical interfaces of a node (excluding the ONS node). Choices include:
•
Note
•
•
When you choose a different setting, the MWTM opens a popup with this message:
A clean poll will be triggered if this value is changed.Click OK to close the popup. Click Save to activate your changes. You can view your changes in the MWTM client and web interfaces.
Save
Button to save the changes that you make to the object information. Updates all MWTM windows to reflect your changes, and exits the dialog box.
Restore
Button to restore changes that you make to the Name and Icon Name fields of the Edit Properties dialog box and leave the dialog box open.
Cancel
Button to exit the dialog box without saving any changes.
Help
Button to display online help for the dialog box.
1 The MWTM does not manage BSC, BTS, RNC, or Node B objects but displays them in the topology window to help you visualize the network.
Editing Properties for a RAN-O Backhaul
To edit the properties of a backhaul or virtual backhaul interface, right-click the backhaul object in the navigation tree or right pane, and choose Edit > Properties in the right-click menu.
The MWTM displays the Edit RAN Backhaul Properties dialog box, which contains:
Name
Name of the backhaul.
You can use this field to specify a new, more meaningful name for the backhaul.
Remember that:
•
–
–
–
If you enter a name that is longer than 30 characters, or if you enter any other special characters, the MWTM beeps and retains the current name.
•
When you click Save, all MWTM windows are updated automatically to reflect the new name.
Threshold Information
Displays slider bars for controlling the Acceptable, Warning, and Overloaded threshold settings. Left-click the slider and drag it to the desired setting for each threshold. See Threshold Information (RAN-O Only), page 7-36, for descriptions of these thresholds.
Bandwidth Information
Displays:
•
•
The user bandwidth is the value that you (the user) specify for the backhaul. Send and receive values will differ if the interface is asymmetrical.
The backhaul appears in the backhaul real-time chart as a percentage of the User Bandwidth. The preset value for the User Bandwidth is the same as the System Bandwidth.
When you change the User Bandwidth, you are changing the scale of the Y axis of the backhaul real-time chart in the Performance tab (see Displaying Backhaul Performance Statistics, page 11-37). The X and Y values of the data do not change. The threshold ranges resize because they are percentages of User Bandwidth.
The User Bandwidth represents 100%. Data points that are higher than the User Bandwidth will exceed 100%. The Y axis dynamically increases to display all data points. (See Why does my backhaul graph show greater than 100% for transmit traffic?, page C-24).
•
•
The system bandwidth is the value that the system specifies for the backhaul. Send and receive values will differ if the interface is asymmetrical. You cannot edit this field.
Save
Saves changes that you make to the object information, updates all MWTM windows to reflect your changes, and exits the dialog box.
Restore
Restores changes that you make to the Name, and sets the Threshold Information, and Bandwidth Information fields to the system defaults. The dialog box is left open.
Cancel
Exits the dialog box without saving any changes.
Help
Displays online help for the dialog box.
Attaching Notes
Tip
You use the MWTM to annotate an object, attaching a descriptive string to it. To attach a note to an object, in the:
•
•
Note
The Edit Notes dialog contains:
Related Topic
Viewing Notes
You use the MWTM to view any notes that are associated with an object. To view a note:
•
•
The MWTM displays the Notes tab for the chosen object, which shows:
•
•
•
Note
For example, to view a note for a node, right-click the node in the Node table in the right pane or in a view in the navigation tree, then choose View > Notes in the right-click menu.
Related Topic
Deleting Objects
After discovery, the objects in your network are known to the MWTM and added to the MWTM database. Physically deleting objects from your network is not the same as deleting them from the MWTM database. These sections describe the differences between deleting objects from your network, the MWTM database, and the MWTM discovery database, and the procedures for doing so:
•
•
Deleting an Object from Your Network
If you physically delete a known object from your network (for example, by powering down a node), it remains in the MWTM database, the MWTM labels it Unknown, and the system administrator is responsible for deleting it from the MWTM database, if you choose to do so.
Note
Deleting an Object from the MWTM Database
Typically, you delete an object from the MWTM database for one of these reasons:
•
•
You are aware of the reason for the state, and you no longer want to see the object in the MWTM displays. For example, the object might be a test lab device, or it could be associated with an object that was removed from the network.
Note
•
If you have physically deleted a known object from your network, and you then delete it from the MWTM, it is no longer in the MWTM database, it does not appear in MWTM windows, and it is not discovered when you run discovery.
If you have not physically deleted a known object from your network, and you delete it from the MWTM, any associated objects are also automatically deleted from the MWTM database (if applicable). However, at the next poll the MWTM finds the object (and any associated objects) and adds it back to the MWTM database, setting the status appropriately. If this happens, do not delete the object again. Instead, set it to Ignored. See Ignoring and Unignoring Objects, for more information.
To delete an object from the MWTM database, use one of these procedures:
Note
•
•
The MWTM asks you to confirm the deletion. Click:
•
•
You can also enter the mwtm delete commands from the command line interface to delete one or more objects from the MWTM database. See mwtm delete, page B-26, for more information on the use of this command.
Deleting a Node from the MWTM Discovery Dialog
If you want to completely eliminate a given node from the MWTM database, you can delete it from the MWTM Discovery dialog box, ensuring that the MWTM never even discovers it.
Note
To delete a node from the MWTM Discovery dialog box:
Step 1
Step 2
Step 3
Step 4
The MWTM deletes the nodes from the MWTM database, without asking for confirmation. The MWTM will no longer discover the nodes.
Unmanaging and Managing Nodes or ITP Signaling Points
You use the MWTM to change a node or any associated signaling point to the Unmanaged state. You can also remove the Unmanaged state from these objects.
In some situations, you might not want to a node or signaling point to appear in MWTM windows. However, you might be unable to delete the object from the MWTM database. For example, if:
•
•
In these situations, you can label the object as Unmanaged. When you set a node or signaling point to the Unmanaged state, the MWTM removes the object from the poll list.
Note
Users with authentication level System Administrator (level 5) can Manage nodes or ITP signaling points.
Note
To label a node or signaling point Unmanaged:
Step 1
Note
Step 2
Note
You can also remove the Unmanaged status from a node or signaling point, when you are ready to return them to the MWTM poll list. To remove the Unmanaged status from an object:
Step 1
Note
Step 2
Note
Note
Excluding Nodes or ITP Signaling Points from a View
To exclude a node or signaling point from the current view, right-click the node or signaling point in a window, then select Exclude from View in the right-click menu. The MWTM excludes the node or signaling point from the current view. See Creating a New View, page 6-7, for more information about excluding objects from views.
Ignoring and Unignoring Objects
You can instruct the MWTM to ignore an object when it aggregates and displays network data. Setting objects to Ignored prevents known problems from affecting MWTM displays for associated network objects. In effect, you are preventing a known problem from distracting you from other, more urgent network problems.
Example:
You can set a node to Ignored before shutting down the node for maintenance.
Note
Also, if you set an object to Ignored, make a note of the change, and remember to reset the object when the problem is corrected or the maintenance is complete.•
Right-click the object, then select Ignore from the menu
or
In the object window in the right pane, check the Ignored check box.
•
•
•
Note
