MIB
|
Description
|
ATM-MIB.my
|
Module for ATM and AAL5-related objects for managing ATM interfaces, ATM virtual links, ATM cross-connects, AAL5 entities, and AAL5 connections.
|
ATM-TC-MIB.my
|
Provides Textual Conventions and OBJECT-IDENTITY Objects to be used by ATM systems.
|
CISCO-AAA-SERVER-MIB.my
|
Provides configuration and statistics reflecting the state of authentication, authorization, and accounting (AAA) server operation in the node and AAA communications with external servers.
|
CISCO-ACCESS-ENVMON-MIB.my
|
Describes the additional status of the Environmental Monitor on those Cisco Access devices which support one.
|
CISCO-CLASS-BASED-QOS-MIB.my
|
Class-Based QoS Configuration and Statistics MIB. This MIB provides read access to Quality of Service (QoS) configuration and statistics information for Cisco platforms that support the Modular Quality of Service Command-line Interface (Modular QoS CLI).
|
CISCO-CONFIG-MAN-MIB.my
|
Provides configuration management, primarily by tracking changes and saving the running configuration. This MIB represents a model of configuration data that exists in various locations:
• running—In use by the running system
•terminal—Logical or attached hardware
•local—Saved locally in NVRAM or flash
•remote—Saved to a server on the network
|
CISCO-ENHANCED-MEMPOOL-MIB.my
|
Monitors the memory pools of all physical entities on a managed system.
|
CISCO-ENTITY-FRU-CONTROL
CAPABILITY.my
|
Provides additional capabilities for various platforms that are needed by the CISCO-ENTITY-FRU-CONTROL-MIB.
|
CISCO-ENTITY-FRU-CONTROL-MIB.my
|
Monitors and configures the operational status of Field Replaceable Units (FRUs) of the system listed in the Entity-MIB (RFC 2037) entPhysicalTable. FRUs include assemblies such as power supplies, fans, processor modules, interface modules, and so forth.
|
CISCO-ENVMON-MIB.my
|
Provides environmental monitoring information on Cisco ITPs.
|
CISCO-EPM-NOTIFICATION-MIB.my
|
Defines the trap structure that carries the identity and status information of the managed object. The MWTM can send internal events as traps defined in this MIB to third-party network management system (NMS) applications for further processing.
|
CISCO-FLASH-MIB.my
|
Provides management of Cisco Flash Devices.
|
CISCO-FRAME-RELAY-MIB.my
|
Cisco Frame Relay MIB file. This MIB provides Frame Relay specific information.
|
CISCO-HSRP-EXT-MIB.my
|
Provides an extension to the CISCO-HSRP-MIB which defines Cisco's proprietary Hot Standby Routing Protocol (HSRP). The extensions cover assigning of secondary HSRP IP addresses and modifying an HSRP group's priority by tracking the operational status of interfaces.
|
CISCO-HSRP-MIB.my
|
Provides a means to monitor and configure the Cisco IOS proprietary Hot Standby Router Protocol (HSRP). Cisco HSRP protocol is defined in RFC2281.
|
CISCO-ICSUDSU-MIB.my
|
Integrated CSU/DSU MIB module for T1 and switched 56 kbps interfaces.
|
CISCO-IF-EXTENSION-MIB.my
|
Extension to the CISCO-IETF-SCTP-MIB used to provide additional information to manage the Stream Control Transmission Protocol (RFC 2960).
|
CISCO-MEMORY-POOL-MIB.my
|
Module for monitoring memory pools.
|
CISCO-PROCESS-MIB.my
|
Shows memory and CPU on Cisco nodes. CPU gives a general idea of how busy the processor is. The numbers are a ratio of the current idle time divided by the longest idle time.
|
CISCO-PRODUCTS-MIB.my
|
Defines the object identifiers that are assigned to various hardware platforms, and hence are returned as values for sysObjectID.
|
CISCO-QOS-PIB-MIB.my
|
Cisco QoS Policy PIB for provisioning QoS policy.
|
CISCO-RADIUS-MIB.my
|
Radius Configuration MIB. This MIB module is for monitoring and configuring authentication and logging services using RADIUS (Remote Authentication Dial In User Service) related objects.
|
CISCO-RF-MIB.my
|
Provides configuration control and status for the Redundancy Framework (RF) subsystem. RF provides a mechanism for logical redundancy of software functionality and is designed to support 1-to-1 redundancy on processor cards. Redundancy is concerned with the duplication of data elements and software functions to provide an alternative in case of failure.
|
CISCO-RTTMON-MIB.my
|
Defines a MIB for Round Trip Time (RTT) monitoring of a list of targets, using a variety of protocols.
|
CISCO-SMI.my
|
Defines the Structure of Management Information for the Cisco enterprise.
|
CISCO-STACK-MIB.my
|
Provides configuration and runtime status for chassis, modules, ports, and so on, on the Catalyst systems.
|
CISCO-SYSLOG-MIB.my
|
Provides a means of gathering syslog messages generated by the Cisco IOS. The MWTM can send internal events as traps defined in this MIB to third-party NMS applications for further processing.
|
CISCO-TC.my
|
Defines textual conventions used throughout Cisco enterprise MIBs.
|
CISCO-VTP-MIB.my
|
Module for entities implementing the VTP protocol and VLAN management.
|
ENTITY-MIB.my
|
Module that represents multiple logical entities supported by a single SNMP agent. This MIB is based on RFC 2737. For more information on entity MIBs, see RFC 2037 section 3.
|
FDDI-SMT73-MIB.my
|
Contains information for FDDI (Fiber Distributed Data Interface).
|
HCNUM-TC.my
|
Contains textual conventions for high capacity data types. This module addresses an immediate need for data types not directly supported in the SMIv2. This short-term solution is meant to be deprecated when a long-term solution is deployed.
|
IANAifType-MIB.my
|
Defines the IANAifType Textual Convention, and thus the enumerated values of the ifType object defined in MIB-II's ifTable.
|
IF-MIB.my
|
Describes generic objects for network interface sublayers. This MIB is an updated version of MIB-II's ifTable, and incorporates the extensions defined in RFC 1229.
|
IMA-MIB.my
|
Module that manages ATM Forum Inverse Multiplexing for ATM (IMA) interfaces.
|
INET-ADDRESS-MIB.my
|
Defines textual conventions for representing Internet addresses. An Internet address can be an IPv4 address, an IPv6 address, or a DNS domain name. This module also defines textual conventions for Internet port numbers, autonomous system numbers, and the length of an Internet address prefix.
|
OLD-CISCO-INTERFACES-
MIB.my
|
Defines interfaces for the Cisco enterprise.
|
OLD-CISCO-SYS-MIB.my
|
Provides a means of gathering basic information for an IOS node.
|
PerfHist-TC-MIB.my
|
Provides Textual Conventions to be used by systems supporting 15 minute-based performance history counts.
|
RFC1213-MIB.my
|
Provides basic management information on the ITP (RFC 1213).
|
RFC1315-MIB.my
|
Frame Relay MIB file.
|
RFC-1406-MIB.my
|
Contains DS1 (T1/E1) line information.
|
RMON2-MIB.my
|
Module for managing remote monitoring device implementations. This MIB module augments the original RMON MIB as specified in RFC 1757.
|
RMON-MIB.my
|
Remote network monitoring devices, often called monitors or probes, are instruments that exist for the purpose of managing a network. This MIB defines objects for managing remote network monitoring devices.
|
SNMP-FRAMEWORK-MIB.my
|
Defines the SNMP Management Architecture.
|
SNMP-TARGET-MIB.my
|
Defines the MIB objects that provide mechanisms to remotely configure the parameters used by an SNMP entity for the generation of SNMP messages.
|
SNMPv2-CONF.my
|
Defines SNMPv2 conformance.
|
SNMPv2-MIB.my
|
Defines SNMPv2 entities.
|
SNMPv2-SMI.my
|
Defines the Structure of Management Information for SNMPv2.
|
SNMPv2-TC.my
|
Defines textual conventions for SNMPv2.
|
TOKEN-RING-RMON-MIB.my
|
Contains Token Ring monitoring information.
|
Feedback