Cisco IOS Software Releases 12.4 T

Table Of Contents

Optional OCSP Nonce

Optional OCSP Nonce

---

This feature provides users with the ability to configure the sending of a nonce, or unique identifier for an Online Certificate Status Protocol (OCSP) request, during OCSP communications.

Configuration Information

Configuration information is included in the "Configuring Authorization and Revocation of Certificates in a PKI" chapter in the Cisco IOS Security Configuration Guide, Release 12.4T at the following URL:

•http://www.cisco.com/en/US/docs/ios/sec_secure_connectivity/configuration/guide/sec_cfg_auth_rev_cert_ps6441_TSD_Products_Configuration_Guide_Chapter.html

Command Reference Information

Command reference information is included in the Cisco IOS Security Command Reference.

New or Modified Commands

The following command is new or modified for this feature:

•crypto pki trustpoint

List of All Release 12.4T Commands

An alphabetical list of all Cisco IOS Release 12.4T commands is in the Cisco IOS Master Commands List, Release 12.4T, at the following URL:

•http://www.cisco.com/en/US/docs/ios/mcl/124tmcl/124t_book.html

List of All New, Modified, Removed, and Replaced Release 12.4T Commands

Alphabetized lists of all new, modified, removed, and replaced commands for each Cisco IOS Release 12.4T release are in the Cisco IOS New, Modified, Removed, and Replaced Commands, Release 12.4T, document at the following URL:

•https://www.cisco.com/en/US/docs/ios/mcl/124tmcl/124t_nml.html