Cisco IOS Software Releases 12.4 T

Table Of Contents

Clear IP Traffic CLI

Contents

How to Clear IP Traffic Statistics

Clearing IP Traffic Statistics

Examples

Additional References

Related Documents

Standards

MIBs

RFCs

Technical Assistance

Command Reference

clear ip traffic

Clear IP Traffic CLI

---

The Clear IP Traffic CLI feature introduces the clear ip traffic command to clear all IP traffic statistics on a router instead of reloading the router. For added safety, the user will see a confirmation prompt when entering this new command.

History for the Clear IP Traffic Statistics Feature

Release	Modification
12.4(2)T	This feature was introduced.

Finding Support Information for Platforms and Cisco IOS Software Images

Use Cisco Feature Navigator to find information about platform support and Cisco IOS software image support. Access Cisco Feature Navigator at http://www.cisco.com/go/fn. You must have an account on Cisco.com. If you do not have an account or have forgotten your username or password, click Cancel at the login dialog box and follow the instructions that appear.

Contents

•How to Clear IP Traffic Statistics

•Additional References

•Command Reference

How to Clear IP Traffic Statistics

This section has the following procedure:

•Clearing IP Traffic Statistics

Clearing IP Traffic Statistics

Perform this task to clear all IP traffic statistics. Use the clear ip traffic command in conjunction with the show ip traffic command.

SUMMARY STEPS

1. enable

2. clear ip traffic

3. end

DETAILED STEPS

	Command or Action	Purpose
Step 1	enable Example: Router> enable	Enables privileged EXEC mode. •Enter your password if prompted.
Step 2	clear ip traffic Example: Router# clear ip traffic	Clears all IP traffic statistical counters on all interfaces.
Step 3	end Example: Router# end	Exits to EXEC mode.

Examples

The following example shows how to clear the IP traffic statistics.

Router# clear ip traffic

Clear "show ip traffic" counters [confirm]

Y

The following example shows that the IP traffic statistics have been cleared.

Router# show ip traffic

IP statistics:

 Rcvd:  0 total, 0 local destination

        0 format errors, 0 checksum errors, 0 bad hop count

        0 unknown protocol, 0 not a gateway

        0 security failures, 0 bad options, 0 with options

 Opts:  0 end, 0 nop, 0 basic security, 0 loose source route

        0 timestamp, 0 extended security, 0 record route

        0 stream ID, 0 strict source route, 0 alert, 0 cipso

        0 other

 Frags: 0 reassembled, 0 timeouts, 0 couldn't reassemble

        0 fragmented, 0 couldn't fragment

 Bcast: 0 received, 0 sent

 Mcast: 0 received, 0 sent

 Sent: 0 generated, 0 forwarded

 Drop: 0 encapsulation failed, 0 unresolved, 0 no adjacency

       0 no route, 0 unicast RPF, 0 forced drop

ICMP statistics:

 Rcvd: 0 format errors, 0 checksum errors, 0 redirects, 0 unreachable

       0 echo, 0 echo reply, 0 mask requests, 0 mask replies, 0 quench

       0 parameter, 0 timestamp, 0 info request, 0 other

       0 irdp solicitations, 0 irdp advertisements

 Sent: 0 redirects, 0 unreachable, 0 echo, 0 echo reply

       0 mask requests, 0 mask replies, 0 quench, 0 timestamp

       0 info reply, 0 time exceeded, 0 parameter problem

       0 irdp solicitations, 0 irdp advertisements

UDP statistics:

 Rcvd: 0 total, 0 checksum errors, 0 no port

 Sent: 0 total, 0 forwarded broadcasts

TCP statistics:

 Rcvd: 0 total, 0 checksum errors, 0 no port

 Sent: 0 total

Probe statistics:

 Rcvd: 0 address requests, 0 address replies

       0 proxy name requests, 0 where-is requests, 0 other

 Sent: 0 address requests, 0 address replies (0 proxy)

       0 proxy name replies, 0 where-is replies

EGP statistics:

 Rcvd: 0 total, 0 format errors, 0 checksum errors, 0 no listener

 Sent: 0 total

IGRP statistics:

 Rcvd: 0 total, 0 checksum errors

 Sent: 0 total

OSPF statistics:

 Rcvd: 0 total, 0 checksum errors

       0 hello, 0 database desc, 0 link state req

       0 link state updates, 0 link state acks

 Sent: 0 total

IP-IGRP2 statistics:

 Rcvd: 0 total

 Sent: 0 total

PIMv2 statistics: Sent/Received

 Total: 0/0, 0 checksum errors, 0 format errors

 Registers: 0/0, Register Stops: 0/0, Hellos: 0/0

 Join/Prunes: 0/0, Asserts: 0/0, grafts: 0/0

 Bootstraps: 0/0, Candidate_RP_Advertisements: 0/0

IGMP statistics: Sent/Received

 Total: 0/0, Format errors: 0/0, Checksum errors: 0/0

 Host Queries: 0/0, Host Reports: 0/0, Host Leaves: 0/0 

 DVMRP: 0/0, PIM: 0/0

Additional References

The following sections provide references related to the Clear IP Traffic feature.

Related Documents

Related Topic	Document Title
IP application services configuration tasks	Cisco IOS IP Application Services Configuration Guide, Release 12.4
IP application services commands: complete command syntax, command mode, command history, defaults, usage guidelines, and examples	Cisco IOS IP Application Services Command Reference, Release 12.4

Standards

Standard	Title
No new or modified standards are supported by this feature, and support for existing standards has not been modified by this feature.	—

MIBs

MIBs	MIBs Link
No new or modified MIBs are supported by this feature, and support for existing MIBs has not been modified by this feature.	To locate and download MIBs for selected platforms, Cisco IOS releases, and feature sets, use Cisco MIB Locator found at the following URL: http://www.cisco.com/go/mibs

RFCs

RFCs	Title
No new or modified RFCs are supported by this feature, and support for existing RFCs has not been modified by this feature.	—

Technical Assistance

Description	Link
The Cisco Technical Support website contains thousands of pages of searchable technical content, including links to products, technologies, solutions, technical tips, and tools. Registered Cisco.com users can log in from this page to access even more content.	http://www.cisco.com/techsupport

Command Reference

This section documents one new command only.

•clear ip traffic

clear ip traffic

To clear all IP traffic statistics on all interfaces of a router, use the clear ip traffic command in privileged EXEC mode.

clear ip traffic

Syntax Description

This command has no arguments or keywords.

Command Modes

Privileged EXEC

Command History

Release	Modification
12.4(2)T	This command was introduced.

Examples

The following example clears all IP traffic statistics on all interfaces:

Router# clear ip traffic

Related Commands

Command	Description
show ip traffic	Displays statistics about IP traffic.

Copyright © 2005 Cisco Systems, Inc. All rights reserved.