![]() |
Table Of Contents
CNS Config Retrieve Enhancement with Retry and Interval
CNS Config Retrieve Enhancement with Retry and Interval
The Cisco Networking Services (CNS) Config Retrieve Enhancement with Retry and Interval feature adds new functionality to the cns config retrieve command enabling you to specify the retry interval and an amount of time in seconds to wait before attempting to retrieve a configuration from a trusted server. The number of retries is restricted to 100 to prevent the configuration agent from indefinitely attempting to reach an unreachable server. Use the keyboard combination Ctrl-Shift-6 to abort the cns config retrieve command.
Configuration Information
Configuration information is included in the "Cisco Networking Services" module of the Cisco IOS Network Management Configuration Guide, Release 12.4T, at the following URL:
http://www.cisco.com/en/US/docs/ios/netmgmt/configuration/guide/12_4t/nm_12_4t_book.html
The following sections provide information about this feature:
•
CNS Config Retrieve Enhancement with Retry and Interval
•
Retrieving a CNS Configuration from a Server
For a complete list of features included in the "Cisco Networking Services" module, see the Feature Information Table located toward the end of the module.
Command Reference Information
Command reference information is included in the Cisco IOS Network Management Command Reference, Release 12.4T, at the following URL:
http://www.cisco.com/en/US/docs/ios/netmgmt/command/reference/nm_book.html
New or Modified Commands
The following command is modified for this feature:
•
cns config retrieve
List of All Release 12.4T Commands
An alphabetical list of all Cisco IOS Release 12.4T commands is in the Cisco IOS Master Commands List, Release 12.4T, at the following URL:
http://www.cisco.com/en/US/docs/ios/mcl/124tmcl/124t_book.html
List of All New, Modified, Removed, and Replaced Release 12.4(15)T Commands
Alphabetized lists of all new, modified, removed, and replaced commands for each Cisco IOS Release 12.4T release are in the Cisco IOS New, Modified, Removed, and Replaced Commands, Release 12.4T, document at the following URL:
http://www.cisco.com/en/US/products/ps6441/products_product_index09186a00805db026.html
Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.
© 2007 Cisco Systems, Inc. All rights reserved.