Cisco IOS Software Releases 12.4 T

Table Of Contents

SCCP PLAR with DTMF Out-Pulse Digits for FXS Analog Phones

SCCP PLAR with DTMF Out-Pulse Digits for FXS Analog Phones

---

Last Updated: August 1, 2008

This feature provides private line automatic ring-down (PLAR) support and enhanced speed-dial capabilities for Skinny Client Control Protocol (SCCP) analog ports on a Cisco VG 224 voice gateway under the control of Cisco Unified Communication Manager or Cisco Unified Communications Manager Express (Cisco Unified CME).

Configuration Information

Configuration information is included in the "Configuring SCCP and STC Application" module in the Supplementary Services Features for FXS Ports on Cisco IOS Voice Gateways Configuration Guide at the following URL:

•http://www.cisco.com/en/US/docs/ios/voice/fxs/configuration/guide/fxsbasic.html

Command Reference Information

Command reference information is included in the the Cisco IOS Voice Command Reference, Release 12.4T, at the following URL:

•http://cisco.com/en/US/docs/ios/12_3t/voice/command/reference/123tvr.html

New or Modified Commands

The following commands are new or modified for this feature:

•debug condition voice-port

•digit

•sccp plar

•show stcapp feature codes

•speed dial

•voicemail (stcapp-fsd)

•voiceport

List of All Release 12.4T Commands

An alphabetical list of all Cisco IOS Release 12.4T commands is in the Cisco IOS Master Commands List, All Releases, at the following URL:

•http://www.cisco.com/en/US/docs/ios/mcl/allreleasemcl/all_book.html

List of All New, Modified, Removed, and Replaced Release 12.4T Commands

Alphabetized lists of all new, modified, removed, and replaced commands for each Cisco IOS Release 12.4T release are in the Cisco IOS New, Modified, Removed, and Replaced Commands, Release 12.4T, document at the following URL:

•http://www.cisco.com/en/US/products/ps6441/products_product_index09186a00805db026.html