 Feedback
|
Table Of Contents
FHRP—EOT Integration with EEM
First Hop Redundancy Protocol (FHRP) Enhanced Object Tracking (EOT) is now integrated with Embedded Event Manager (EEM) to allow EEM to report on a status change of a tracked object and to allow enhanced object tracking to track EEM objects.
Configuration Information
Configuration information is included in the "Configuring Enhanced Object Tracking" module of the Cisco IOS IP Application Services Configuration Guide, Release 12.4T, at the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124tcg/tiapp_c/taipbtrk.htm
The following sections provide information about this feature:
•
Enhanced Object Tracking and Embedded Event Manager
For a complete list of features included in the "Configuring Enhanced Object Tracking" module, see the Feature Information Table located toward the end of the module.
Command Reference Information
Command reference information is included in the Cisco IOS IP Application Services Command Reference, Release 12.2SR, at the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sr/cr/sriap_r/index.htm
New or Modified Commands
The following commands are new or modified for this feature:
•
•
•
•
•
•
•
•
List of All Release 12.2SR Commands
An alphabetical list of all Cisco IOS Release 12.2SR commands is in the Cisco IOS Master Commands List, Release 12.2SR, at the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sr/122srmdx/122sridx.htm
Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.
© 2007 Cisco Systems, Inc. All rights reserved.
