Downloads |
 Feedback
|
Table Of Contents
Embedded Event Manager 2.1
EEM is a flexible, policy-driven framework that supports in-box monitoring of different system components with the help of software agents known as event detectors. EEM 2.1 introduced the command-line interface (CLI), none, and online insertion and removal (OIR) event detectors. The CLI event detector screens CLI commands for a regular expression match. The none event detector publishes an event when the Cisco IOS event manager run CLI command executes an EEM policy. The OIR event detector publishes an event when a particular hardware insertion or removal event occurs. EEM 2.1 introduced the following actions:
•
Executing a Cisco IOS CLI command.
•
•
•
EEM 2.1 also permits multiple concurrent policies to be run using the new event manager scheduler script command. Support for Simple Network Management Protocol (SNMP) event detector rate-based events is provided as is the ability to create policies using Tool Command Language (Tcl).
Configuration Information
Configuration information is included in the "Embedded Event Manager Overview" module in the Embedded Event Manager section of the Cisco IOS Network Management Configuration Guide, Release 12.4T, at the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124tcg/tnm_c/eem/t_eemo.htm
The following sections provide information about this feature:
•
•
•
•
•
Configuration information is also included in the "Writing Embedded Event Manager Policies Using the Cisco IOS CLI" module in the Embedded Event Manager section of the Cisco IOS Network Management Configuration Guide, Release 12.4T, at the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124tcg/tnm_c/eem/t_eemc.htm
The following sections provide information about this feature:
•
•
•
•
•
Configuration information is also included in the "Writing Embedded Event Manager Policies Using Tcl" module in the Embedded Event Manager section of the Cisco IOS Network Management Configuration Guide, Release 12.4T, at the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124tcg/tnm_c/eem/t_eemt.htm
The following sections provide information about this feature:
•
•
•
•
For a complete list of features included in the "Embedded Event Manager Overview," the "Writing Embedded Event Manager Policies Using the Cisco IOS CLI," and the "Writing Embedded Event Manager Policies Using Tcl" modules, see the Feature Information Table located toward the end of the modules.
Command Reference Information
Command reference information is included in the Cisco IOS Network Management Command Reference, Release 12.2SR, at the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sr/cr/srnm_r/index.htm
New or Modified Commands
The following commands are new or modified for this feature:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.
© 2006 Cisco Systems, Inc. All rights reserved.