Cisco IOS Software Releases 12.2 SR

Table Of Contents

Any Transport over MPLS

Any Transport over MPLS

---

Any Transport over MPLS (AToM) transports Layer 2 packets over a Multiprotocol Label Switching (MPLS) backbone. AToM enables service providers to connect customer sites with existing data link layer (Layer 2) networks by using a single, integrated, packet-based network infrastructure—
a Cisco MPLS network. Instead of using separate networks with network management environments, service providers can deliver Layer 2 connections over an MPLS backbone. AToM provides a common framework to encapsulate and transport supported Layer 2 traffic types over an MPLS network core.

Configuration Information

Configuration information for AToM on the Cisco 7600 router in Cisco IOS Release 12.2(33)SRA is included in the following documents:

•The "Configuring PFC3BXL and PFC3B Mode Multiprotocol Label Switching" module of the Cisco 7600 Series Cisco IOS Software Configuration Guide, 12.2SR at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/core/cis7600/software/122sr/swcg/pfc3mpls.htm

•The "Configuring Multiprotocol Label Switching on the Optical Services Modules" module of the OSM Configuration Note, 12.2SR at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/core/cis7600/cfgnotes/optical/122sr/mpls.htm

•The "Configuring Multiprotocol Label Switching on FlexWAN and Enhanced FlexWAN Modules" module of the FlexWAN and Enhanced FlexWAN Modules Configuration Guide at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/core/cis7600/cfgnotes/flexport/combo/flexmpls.htm

•The "Configuring Any Transport over MPLS on a SIP" section and the "Configuring AToM VP Cell Mode Relay Support" section of the Cisco 7600 Series Router SIP, SSC, and SPA Software Configuration Guide at the following URLs, respectively:

http://www.cisco.com/univercd/cc/td/doc/product/core/cis7600/76sipspa/sipspasw/76sipssc/76cfgsip.htm#wp1162131

http://www.cisco.com/univercd/cc/td/doc/product/core/cis7600/76sipspa/sipspasw/76atmspa/76cfgatm.htm#wp1346992

•The Release Notes for Cisco IOS Release 12.2SR for the Cisco 7600 Series Routers at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122relnt/122srrn.htm

Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.

© 2006 Cisco Systems, Inc. All rights reserved.