Feedback
Contents
BGP Commands: show ip through Z
- show ip as-path-access-list
- show ip bgp
- show ip bgp bmp
- show ip bgp all dampening
- show ip bgp cidr-only
- show ip bgp cluster-ids
- show ip bgp community
- show ip bgp community-list
- show ip bgp dampened-paths
- show ip bgp dampening dampened-paths
- show ip bgp dampening flap-statistics
- show ip bgp dampening parameters
- show ip bgp extcommunity-list
- show ip bgp filter-list
- show ip bgp flap-statistics
- show ip bgp inconsistent-as
- show ip bgp injected-paths
- show ip bgp ipv4
- show ip bgp ipv4 multicast
- show ip bgp ipv4 multicast summary
- show ip bgp ipv6 multicast
- show ip bgp ipv6 unicast
- show ip bgp l2vpn
- show ip bgp neighbors
- show ip bgp path-attribute discard
- show ip bgp path-attribute unknown
- show ip bgp paths
- show ip bgp peer-group
- show ip bgp quote-regexp
- show ip bgp regexp
- show ip bgp replication
- show ip bgp rib-failure
- show ip bgp rpki servers
- show ip bgp rpki table
- show ip bgp rtfilter
- show ip bgp summary
- show ip bgp template peer-policy
- show ip bgp template peer-session
- show ip bgp unicast route-server
- show ip bgp update-group
- show ip bgp vpnv4
- show ip bgp vpnv4 all dampening
- show ip bgp vpnv4 all sso summary
- show ip bgp vpnv6 unicast all dampening
- show ip community-list
- show ip extcommunity-list
- show ip policy-list
- show ip prefix-list
- show ip route
- show ip route vrf
- show tcp ha connections
- slow-peer detection
- slow-peer split-update-group dynamic
- slow-peer split-update-group static
- soo
- stats-reporting-period (bmp)
- synchronization
- table-map
- template peer-policy
- template peer-session
- timers bgp
- update-source (bmp)
- ve
show ip as-path-access-list
To display the contents of all current autonomous system (AS) path access lists, use the show ip as-path-access-list command in user EXEC or privileged EXEC mode.
Command Default
If the number argument is not specified, command output is displayed for all AS path access lists.
Command History
Release
Modification
11.3
This command was introduced.
12.2(33)SRC
This command was integrated into Cisco IOS Release 12.2(33)SRC.
12.2(33)SXI
This command was integrated into Cisco IOS Release 12.2(33)SXI.
12.2(31)SB
This command was integrated into Cisco IOS Release 12.2(31)SB.
Cisco IOS XE Release 2.1
This command was integrated into Cisco IOS XE Release 2.1.
Examples
The following is sample output from the show ip as-path-access-list command:
Router# show ip as-path-access-list AS path access list 34 deny RTR$ AS path access list 100 permit 100$The table below describes the fields shown in the display.
Table 1 show ip as-path-access-list Field Descriptions Field
Description
AS path access list
Indicates the AS path access list number.
deny
Indicates the number of packets that are rejected since the regular expression failed to match the representation of the AS path of the route as an ASCII string.
permit
Indicates the number of packets that are forwarded since the regular expression matched the representation of the AS path of the route as an ASCII string.
show ip bgp
To display entries in the Border Gateway Protocol (BGP) routing table, use the show ip bgp command in user EXEC or privileged EXEC mode.
show ip bgp [ ip-address [ mask [ longer-prefixes [ injected ] | shorter-prefixes [ length ] | bestpath | multipaths | subnets ] | bestpath | multipaths ] | all | oer-paths | prefix-list name | pending-prefixes | route-map name | version { version-number | recent offset-value } ]
Syntax Description
ip-address
(Optional) IP address entered to filter the output to display only a particular host or network in the BGP routing table.
mask
(Optional) Mask to filter or match hosts that are part of the specified network.
longer-prefixes
(Optional) Displays the specified route and all more-specific routes.
injected
(Optional) Displays more-specific prefixes injected into the BGP routing table.
shorter-prefixes
(Optional) Displays the specified route and all less-specific routes.
length
(Optional) The prefix length. The range is a number from 0 to 32.
bestpath
(Optional) Displays the best path for this prefix.
multipaths
(Optional) Displays multipaths for this prefix.
subnets
(Optional) Displays the subnet routes for the specified prefix.
all
(Optional) Displays all address family information in the BGP routing table.
oer-paths
(Optional) Displays Optimized Edge Routing (OER) controlled prefixes in the BGP routing table.
prefix-list name
(Optional) Filters the output based on the specified prefix list.
pending-prefixes
(Optional) Displays prefixes that are pending deletion from the BGP routing table.
route-map name
(Optional) Filters the output based on the specified route map.
version version-number
(Optional) Displays all prefixes with network versions greater than or equal to the specified version number. The range is from 1 to 4294967295.
recent offset-value
(Optional) Displays the offset from the current routing table version. The range is from 1 to 4294967295.
Command History
Release
Modification
10.0
This command was introduced.
12.0
This command was modified. The display of prefix advertisement statistics was added.
12.0(6)T
This command was modified. The display of a message indicating support for route refresh capability was added.
12.0(14)ST
This command was modified. The prefix-list, route-map, and shorter-prefixes keywords were added.
12.2(2)T
This command was modified. The output was modified to display multipaths and the best path to the specified network.
12.0(21)ST
This command was modified. The output was modified to show the number of Multiprotocol Label Switching (MPLS) labels that arrive at and depart from a prefix.
12.0(22)S
This command was modified. A new status code indicating stale routes was added to support BGP graceful restart.
12.2(14)S
This command was modified. A message indicating support for BGP policy accounting was added.
12.2(14)SX
This command was integrated into Cisco IOS Release 12.2(14)SX.
12.2(15)T
This command was modified. A new status code indicating stale routes was added to support BGP graceful restart.
12.3(2)T
This command was modified. The all keyword was added.
12.2(17b)SXA
This command was integrated into Cisco IOS Release 12.2(17b)SXA.
12.3(8)T
This command was modified. The oer-paths keyword was added.
12.4(15)T
This command was modified. The pending-prefixes, bestpath, multipaths, and subnets keywords were added.
12.2(33)SRA
This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2(31)SB2
This command was integrated into Cisco IOS Release 12.2(31)SB2.
12.0(32)S12
This command was modified. Support for displaying 4-byte autonomous system numbers in asdot notation was added.
12.0(32)SY8
This command was modified. Support for displaying 4-byte autonomous system numbers in asplain and asdot notation was added.
12.4(22)T
This command was modified. The version version-number and the recent offset-value keyword and argument pairs were added.
12.4(24)T
This command was modified. Support for displaying 4-byte autonomous system numbers in asdot notation was added.
Cisco IOS XE Release 2.3
This command was modified. Support for displaying 4-byte autonomous system numbers in asdot notation was added.
12.2(33)SXI1
This command was modified. Support for displaying 4-byte autonomous system numbers in asplain and asdot notation was added.
12.0(33)S3
This command was modified. Support for displaying 4-byte autonomous system numbers in asplain notation was added and the default display format was changed to asplain.
Cisco IOS XE Release 2.4
This command was modified. Support for displaying 4-byte autonomous system numbers in asplain notation was added and the default display format was changed to asplain.
12.2(33)SRE
This command was modified. The command output was modified to show the backup path and the best external path information. Support for the best external route and backup path was added. Support for displaying 4-byte autonomous system numbers in asplain and asdot notation was added.
12.2(33)XNE
This command was integrated into Cisco IOS Release 12.2(33)XNE.
15.0(1)S
This command was integrated into Cisco IOS Release 15.0(1)S.
15.2(1)S
This command was modified to display an Resource Public Key Infrastructure (RPKI) validation code per network, if one applies.
Cisco IOS XE Release 3.5S
This command was modified to display an RPKI validation code per network, if one applies.
15.1(1)SG
This command was modified. Support for displaying 4-byte autonomous system numbers in asplain and asdot notation was added.
Cisco IOS XE Release 3.3SG
This command was modified. Support for displaying 4-byte autonomous system numbers in asplain and asdot notation was added.
15.2(4)S
This command was modified. Output about discarded or unknown path attributes was added for the BGP Attribute Filter feature. Output about additional path selection was added for the BGP Additional Paths feature. Output about paths imported from a virtual routing and forwarding (VRF) table to the global table was added for the BGP Support for IP Prefix Export from a VRF table into the global table.
Cisco IOS XE Release 3.7S
This command was modified. Output about discarded or unknown path attributes was added for the BGP Attribute Filter feature. Output about additional path selection was added for the BGP Additional Paths feature. Output about paths imported from a VRF table to the global table was added for the BGP Support for IP Prefix Export from a VRF table into the global table.
15.1(1)SY
This command was integrated into Cisco IOS Release 15.1(1)SY.
15.2(1)E
This command was integrated into Cisco IOS Release 15.2(1)E.
Usage Guidelines
The show ip bgp command is used to display the contents of the BGP routing table. The output can be filtered to display entries for a specific prefix, prefix length, and prefixes injected through a prefix list, route map, or conditional advertisement.
When changes are made to the network address, the network version number is incremented. Use the version keyword to view a specific network version.
In Cisco IOS Release 12.0(32)SY8, 12.0(33)S3, 12.2(33)SRE, 12.2(33)XNE, 12.2(33)SXI1, Cisco IOS XE Release 2.4, and later releases, the Cisco implementation of 4-byte autonomous system numbers uses asplain—65538, for example—as the default regular expression match and output display format for autonomous system numbers, but you can configure 4-byte autonomous system numbers in both the asplain format and the asdot format as described in RFC 5396. To change the default regular expression match and output display of 4-byte autonomous system numbers to asdot format, use the bgp asnotation dot command followed by the clear ip bgp * command to perform a hard reset of all current BGP sessions.
In Cisco IOS Release 12.0(32)S12, 12.4(24)T, and Cisco IOS XE Release 2.3, the Cisco implementation of 4-byte autonomous system numbers uses asdot—1.2, for example—as the only configuration format, regular expression match, and output display, with no asplain support.
oer-paths Keyword
In Cisco IOS Release 12.3(8)T and later releases, BGP prefixes that are monitored and controlled by OER are displayed by entering the show ip bgp command with the oer-paths keyword.
Examples
The following sample output displays the BGP routing table:
Device# show ip bgp BGP table version is 6, local router ID is 10.0.96.2 Status codes: s suppressed, d damped, h history, * valid, > best, i - internal, r RIB-failure, S Stale, m multipath, b backup-path, x best-external, f RT-Filter, a additional-path Origin codes: i - IGP, e - EGP, ? - incomplete RPKI validation codes: V valid, I invalid, N Not found Network Next Hop Metric LocPrf Weight Path N* 10.0.0.1 10.0.0.3 0 0 3 ? N*> 10.0.3.5 0 0 4 ? Nr 10.0.0.0/8 10.0.0.3 0 0 3 ? Nr> 10.0.3.5 0 0 4 ? Nr> 10.0.0.0/24 10.0.0.3 0 0 3 ? V*> 10.0.2.0/24 0.0.0.0 0 32768 i Vr> 10.0.3.0/24 10.0.3.5 0 0 4 ?The table below describes the significant fields shown in the display.
The following sample output shows the BGP routing table with 4-byte autonomous system numbers, 65536 and 65550, shown under the Path field. This example requires Cisco IOS Release 12.0(32)SY8, 12.0(33)S3, 12.2(33)SRE, 12.2(33)XNE, 12.2(33)SXI1, Cisco IOS XE Release 2.4, or a later release.
Device# show ip bgp BGP table version is 4, local router ID is 172.16.1.99 Status codes: s suppressed, d damped, h history, * valid, > best, i - internal, r RIB-failure, S Stale Origin codes: i - IGP, e - EGP, ? - incomplete Network Next Hop Metric LocPrf Weight Path *> 10.1.1.0/24 192.168.1.2 0 0 65536 i *> 10.2.2.0/24 192.168.3.2 0 0 65550 i *> 172.16.1.0/24 0.0.0.0 0 32768 iThe following sample output displays information about the 192.168.1.0 entry in the BGP routing table:
Device# show ip bgp 192.168.1.0 BGP routing table entry for 192.168.1.0/24, version 22 Paths: (2 available, best #2, table default) Additional-path Advertised to update-groups: 3 10 10 192.168.3.2 from 172.16.1.2 (10.2.2.2) Origin IGP, metric 0, localpref 100, valid, internal, backup/repair 10 10 192.168.1.2 from 192.168.1.2 (10.3.3.3) Origin IGP, localpref 100, valid, external, best , recursive-via-connectedThe following sample output displays information about the 10.3.3.3 255.255.255.255 entry in the BGP routing table:
Device# show ip bgp 10.3.3.3 255.255.255.255 BGP routing table entry for 10.3.3.3/32, version 35 Paths: (3 available, best #2, table default) Multipath: eBGP Flag: 0x860 Advertised to update-groups: 1 200 10.71.8.165 from 10.71.8.165 (192.168.0.102) Origin incomplete, localpref 100, valid, external, backup/repair Only allowed to recurse through connected route 200 10.71.11.165 from 10.71.11.165 (192.168.0.102) Origin incomplete, localpref 100, weight 100, valid, external, best Only allowed to recurse through connected route 200 10.71.10.165 from 10.71.10.165 (192.168.0.104) Origin incomplete, localpref 100, valid, external, Only allowed to recurse through connected routeThe table below describes the significant fields shown in the display.
Table 3 show ip bgp ip-address Field Descriptions Field
Description
BGP routing table entry for
IP address or network number of the routing table entry.
version
Internal version number of the table. This number is incremented whenever the table changes.
Paths
The number of available paths, and the number of installed best paths. This line displays “Default-IP-Routing-Table” when the best path is installed in the IP routing table.
Multipath
This field is displayed when multipath load sharing is enabled. This field will indicate if the multipaths are iBGP or eBGP.
Advertised to update-groups
The number of each update group for which advertisements are processed.
Origin
Origin of the entry. The origin can be IGP, EGP, or incomplete. This line displays the configured metric (0 if no metric is configured), the local preference value (100 is default), and the status and type of route (internal, external, multipath, best).
Extended Community
This field is displayed if the route carries an extended community attribute. The attribute code is displayed on this line. Information about the extended community is displayed on a subsequent line.
The following is sample output from the show ip bgp command entered with the all keyword. Information about all configured address families is displayed.
Device# show ip bgp all For address family: IPv4 Unicast ***** BGP table version is 27, local router ID is 10.1.1.1 Status codes: s suppressed, d damped, h history, * valid, > best, i - internal, r RIB-failure Origin codes: i - IGP, e - EGP, ? - incomplete Network Next Hop Metric LocPrf Weight Path *> 10.1.1.0/24 0.0.0.0 0 32768 ? *> 10.13.13.0/24 0.0.0.0 0 32768 ? *> 10.15.15.0/24 0.0.0.0 0 32768 ? *>i10.18.18.0/24 172.16.14.105 1388 91351 0 100 e *>i10.100.0.0/16 172.16.14.107 262 272 0 1 2 3 i *>i10.100.0.0/16 172.16.14.105 1388 91351 0 100 e *>i10.101.0.0/16 172.16.14.105 1388 91351 0 100 e *>i10.103.0.0/16 172.16.14.101 1388 173 173 100 e *>i10.104.0.0/16 172.16.14.101 1388 173 173 100 e *>i10.100.0.0/16 172.16.14.106 2219 20889 0 53285 33299 51178 47751 e *>i10.101.0.0/16 172.16.14.106 2219 20889 0 53285 33299 51178 47751 e * 10.100.0.0/16 172.16.14.109 2309 0 200 300 e *> 172.16.14.108 1388 0 100 e * 10.101.0.0/16 172.16.14.109 2309 0 200 300 e *> 172.16.14.108 1388 0 100 e *> 10.102.0.0/16 172.16.14.108 1388 0 100 e *> 172.16.14.0/24 0.0.0.0 0 32768 ? *> 192.168.5.0 0.0.0.0 0 32768 ? *> 10.80.0.0/16 172.16.14.108 1388 0 50 e *> 10.80.0.0/16 172.16.14.108 1388 0 50 e For address family: VPNv4 Unicast ***** BGP table version is 21, local router ID is 10.1.1.1 Status codes: s suppressed, d damped, h history, * valid, > best, i - internal, r RIB-failure Origin codes: i - IGP, e - EGP, ? - incomplete Network Next Hop Metric LocPrf Weight Path Route Distinguisher: 1:1 (default for vrf vpn1) *> 10.1.1.0/24 192.168.4.3 1622 0 100 53285 33299 51178 {27016,57039,16690} e *> 10.1.2.0/24 192.168.4.3 1622 0 100 53285 33299 51178 {27016,57039,16690} e *> 10.1.3.0/24 192.168.4.3 1622 0 100 53285 33299 51178 {27016,57039,16690} e *> 10.1.4.0/24 192.168.4.3 1622 0 100 53285 33299 51178 {27016,57039,16690} e *> 10.1.5.0/24 192.168.4.3 1622 0 100 53285 33299 51178 {27016,57039,16690} e *>i172.17.1.0/24 10.3.3.3 10 30 0 53285 33299 51178 47751 ? *>i172.17.2.0/24 10.3.3.3 10 30 0 53285 33299 51178 47751 ? *>i172.17.3.0/24 10.3.3.3 10 30 0 53285 33299 51178 47751 ? *>i172.17.4.0/24 10.3.3.3 10 30 0 53285 33299 51178 47751 ? *>i172.17.5.0/24 10.3.3.3 10 30 0 53285 33299 51178 47751 ? For address family: IPv4 Multicast ***** BGP table version is 11, local router ID is 10.1.1.1 Status codes: s suppressed, d damped, h history, * valid, > best, i - internal, r RIB-failure Origin codes: i - IGP, e - EGP, ? - incomplete Network Next Hop Metric LocPrf Weight Path *> 10.40.40.0/26 172.16.14.110 2219 0 21 22 {51178,47751,27016} e * 10.1.1.1 1622 0 15 20 1 {2} e *> 10.40.40.64/26 172.16.14.110 2219 0 21 22 {51178,47751,27016} e * 10.1.1.1 1622 0 15 20 1 {2} e *> 10.40.40.128/26 172.16.14.110 2219 0 21 22 {51178,47751,27016} e * 10.1.1.1 2563 0 15 20 1 {2} e *> 10.40.40.192/26 10.1.1.1 2563 0 15 20 1 {2} e *> 10.40.41.0/26 10.1.1.1 1209 0 15 20 1 {2} e *>i10.102.0.0/16 10.1.1.1 300 500 0 5 4 {101,102} e *>i10.103.0.0/16 10.1.1.1 300 500 0 5 4 {101,102} e For address family: NSAP Unicast ***** BGP table version is 1, local router ID is 10.1.1.1 Status codes: s suppressed, d damped, h history, * valid, > best, i - internal, r RIB-failure Origin codes: i - IGP, e - EGP, ? - incomplete Network Next Hop Metric LocPrf Weight Path * i45.0000.0002.0001.000c.00 49.0001.0000.0000.0a00 100 0 ? * i46.0001.0000.0000.0000.0a00 49.0001.0000.0000.0a00 100 0 ? * i47.0001.0000.0000.000b.00 49.0001.0000.0000.0a00 100 0 ? * i47.0001.0000.0000.000e.00 49.0001.0000.0000.0a00The following is sample output from the show ip bgp longer-prefixes command:
Device# show ip bgp 10.92.0.0 255.255.0.0 longer-prefixes BGP table version is 1738, local router ID is 192.168.72.24 Status codes: s suppressed, * valid, > best, i - internal Origin codes: i - IGP, e - EGP, ? - incomplete Network Next Hop Metric LocPrf Weight Path *> 10.92.0.0 10.92.72.30 8896 32768 ? * 10.92.72.30 0 109 108 ? *> 10.92.1.0 10.92.72.30 8796 32768 ? * 10.92.72.30 0 109 108 ? *> 10.92.11.0 10.92.72.30 42482 32768 ? * 10.92.72.30 0 109 108 ? *> 10.92.14.0 10.92.72.30 8796 32768 ? * 10.92.72.30 0 109 108 ? *> 10.92.15.0 10.92.72.30 8696 32768 ? * 10.92.72.30 0 109 108 ? *> 10.92.16.0 10.92.72.30 1400 32768 ? * 10.92.72.30 0 109 108 ? *> 10.92.17.0 10.92.72.30 1400 32768 ? * 10.92.72.30 0 109 108 ? *> 10.92.18.0 10.92.72.30 8876 32768 ? * 10.92.72.30 0 109 108 ? *> 10.92.19.0 10.92.72.30 8876 32768 ? * 10.92.72.30 0 109 108 ?The following is sample output from the show ip bgp shorter-prefixes command. An 8-bit prefix length is specified.
Device# show ip bgp 172.16.0.0/16 shorter-prefixes 8 *> 172.16.0.0 10.0.0.2 0 ? * 10.0.0.2 0 0 200 ?The following is sample output from the show ip bgp prefix-list command:
Device# show ip bgp prefix-list ROUTE BGP table version is 39, local router ID is 10.0.0.1 Status codes:s suppressed, d damped, h history, * valid, > best, i - internal Origin codes:i - IGP, e - EGP, ? - incomplete Network Next Hop Metric LocPrf Weight Path *> 192.168.1.0 10.0.0.2 0 ? * 10.0.0.2 0 0 200 ?The following is sample output from the show ip bgp route-map command:
Device# show ip bgp route-map LEARNED_PATH BGP table version is 40, local router ID is 10.0.0.1 Status codes:s suppressed, d damped, h history, * valid, > best, i - internal Origin codes:i - IGP, e - EGP, ? - incomplete Network Next Hop Metric LocPrf Weight Path *> 192.168.1.0 10.0.0.2 0 ? * 10.0.0.2 0 0 200 ?The following output indicates (for each neighbor) whether any of the additional path tags (group-best, all, best 2 or best 3) are applied to the path. A line of output indicates rx pathid (received from neighbor) and tx pathid (announcing to neighbors). Note that the “Path advertised to update-groups:” is now per-path when the BGP Additional Paths feature is enabled.
Device# show ip bgp 10.0.0.1 255.255.255.224 BGP routing table entry for 10.0.0.1/28, version 82 Paths: (10 available, best #5, table default) Path advertised to update-groups: 21 25 Refresh Epoch 1 20 50, (Received from a RR-client) 192.0.2.1 from 192.0.2.1 (192.0.2.1) Origin IGP, metric 200, localpref 100, valid, internal, all Originator: 192.0.2.1, Cluster list: 2.2.2.2 mpls labels in/out 16/nolabel rx pathid: 0, tx pathid: 0x9 Path advertised to update-groups: 18 21 Refresh Epoch 1 30 192.0.2.2 from 192.0.2.2 (192.0.2.2) Origin IGP, metric 200, localpref 100, valid, internal, group-best, all Originator: 192.0.2.2, Cluster list: 4.4.4.4 mpls labels in/out 16/nolabel rx pathid: 0x1, tx pathid: 0x8 Path advertised to update-groups: 16 18 19 20 21 22 24 25 27 Refresh Epoch 1 10 192.0.2.3 from 192.0.2.3 (192.0.2.3) Origin IGP, metric 200, localpref 100, valid, external, best2, all mpls labels in/out 16/nolabel rx pathid: 0, tx pathid: 0x7 Path advertised to update-groups: 20 21 22 24 25 Refresh Epoch 1 10 192.0.2.4 from 192.0.2.4 (192.0.2.4) Origin IGP, metric 300, localpref 100, valid, external, best3, all mpls labels in/out 16/nolabel rx pathid: 0, tx pathid: 0x6 Path advertised to update-groups: 10 13 17 18 19 20 21 22 23 24 25 26 27 28 Refresh Epoch 1 10 192.0.2.5 from 192.0.2.5 (192.0.2.5) Origin IGP, metric 100, localpref 100, valid, external, best mpls labels in/out 16/nolabel rx pathid: 0, tx pathid: 0x0 Path advertised to update-groups: 21 Refresh Epoch 1 30 192.0.2.6 from 192.0.2.6 (192.0.2.6) Origin IGP, metric 200, localpref 100, valid, internal, all Originator: 192.0.2.6, Cluster list: 5.5.5.5 mpls labels in/out 16/nolabel rx pathid: 0x1, tx pathid: 0x5 Path advertised to update-groups: 18 23 24 26 28 Refresh Epoch 1 60 40, (Received from a RR-client) 192.0.2.7 from 192.0.2.7 (192.0.2.7) Origin IGP, metric 250, localpref 100, valid, internal, group-best Originator: 192.0.2.7, Cluster list: 3.3.3.3 mpls labels in/out 16/nolabel rx pathid: 0x2, tx pathid: 0x2 Path advertised to update-groups: 25 Refresh Epoch 1 30 40, (Received from a RR-client) 192.0.2.8 from 192.0.2.8 (192.0.2.8) Origin IGP, metric 200, localpref 100, valid, internal, all Originator: 192.0.2.8, Cluster list: 2.2.2.2 mpls labels in/out 16/nolabel rx pathid: 0x1, tx pathid: 0x3 Path advertised to update-groups: 18 21 23 24 25 26 28 Refresh Epoch 1 20 40, (Received from a RR-client) 192.0.2.9 from 192.0.2.9 (192.0.2.9) Origin IGP, metric 200, localpref 100, valid, internal, group-best, all Originator: 192.0.2.9, Cluster list: 2.2.2.2 mpls labels in/out 16/nolabel rx pathid: 0x1, tx pathid: 0x4 Path advertised to update-groups: 21 Refresh Epoch 1 30 40 192.0.2.9 from 192.0.2.9 (192.0.2.9) Origin IGP, metric 100, localpref 100, valid, internal, all Originator: 192.0.2.9, Cluster list: 4.4.4.4 mpls labels in/out 16/nolabel rx pathid: 0x1, tx pathid: 0x1The following is sample output from the show ip bgp command that displays unknown and discarded path attributes:
Device# show ip bgp 192.0.2.0/32 BGP routing table entry for 192.0.2.0/32, version 0 Paths: (1 available, no best path) Refresh Epoch 1 Local 192.168.101.2 from 192.168.101.2 (192.168.101.2) Origin IGP, localpref 100, valid, internal unknown transitive attribute: flag 0xE0 type 0x81 length 0x20 value 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 unknown transitive attribute: flag 0xE0 type 0x83 length 0x20 value 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 discarded unknown attribute: flag 0x40 type 0x63 length 0x64 value 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000The following is sample output from the show ip bgp version command:
Device# show ip bgp version BGP table version is 5, local router ID is 10.2.4.2 Status codes: s suppressed, d damped, h history, * valid, > best, i - internal, r RIB-failure, S Stale, m multipath, b backup-path, x best-external Origin codes: i - IGP, e - EGP, ? - incomplete Network Next Hop Metric LocPrf Weight Path *> 192.168.34.2/24 10.0.0.1 0 0 1 ? *> 192.168.35.2/24 10.0.0.1 0 0 1 ?The following example shows how to display the network version:
Device# show ip bgp 192.168.34.2 | include version BGP routing table entry for 192.168.34.2/24, version 5The following sample output from the show ip bgp version recent command displays the prefix changes in the specified version:
Device# show ip bgp version recent 2 BGP table version is 5, local router ID is 10.2.4.2 Status codes: s suppressed, d damped, h history, * valid, > best, i - internal, r RIB-failure, S Stale, m multipath, b backup-path, x best-external Origin codes: i - IGP, e - EGP, ? - incomplete Network Next Hop Metric LocPrf Weight Path *> 192.168.134.1/28 10.0.0.1 0 0 1 ? *> 192.168.134.19/28 10.0.0.1 0 0 1 ? *> 192.168.134.34/28 10.0.0.1 0 0 1 ?Related Commands
Command
Description
bgp asnotation dot
Changes the default display and the regular expression match format of BGP 4-byte autonomous system numbers from asplain (decimal values) to dot notation.
clear ip bgp
Resets BGP connections using hard or soft reconfiguration.
ip bgp community new-format
Configures BGP to display communities in the format AA:NN.
ip prefix-list
Creates a prefix list or adds a prefix-list entry.
route-map
Defines the conditions for redistributing routes from one routing protocol into another routing protocol.
router bgp
Configures the BGP routing process.
show ip bgp bmp
To display information about the BGP Monitoring Protocol (BMP) servers and neighbors, use the show ip bgp bmp command in privileged EXEC mode.
Syntax Description
neighbors Displays information about the BGP neighbors configured for BMP.
server Displays information about the BMP servers.
server-number Displays information about a particular BMP server. The range of BMP servers you can display is from 1 to 4.
details Displays detailed information about BMP servers.
summary Displays a summary of the BMP server status.
Command History
Release Modification 15.4(1)S
This command was introduced.
Cisco IOS XE Release 3.11S
This command was integrated into Cisco IOS XE Release 3.11S
Usage Guidelines
Use the neighbor bmp-activate and the bmp commands to configure the BMP servers, clients, and BGP neighbors. Once configured, use the show ip bgp bmp command to display the following information:
- Number of BMP servers configured.
- Number of BGP neighbors configured for BMP.
- Current state of the BMP servers.
- Duration of the initial refresh delay and buffer size for BMP.
- Various queues, such as TransitionQ, MonitoringQ, ConfigQ, and StatsQ, configured for the BGP BMP neighbors and BMP servers.
- The IP address or network address, port number, status, uptime, number of messages sent, and the number of active and configured BMP servers for a BGP BMP neighbor.
Examples
The following is sample output from the show ip bgp bmp server command for server number 1. The attributes displayed are configured in the BMP server configuration mode:
Device# show ip bgp bmp server 1 Print detailed info for 1 server number 1. bmp server 1 address: 10.1.1.1 port 8000 description SERVER1 up time 00:06:22 session-startup route-refresh initial-delay 20 failure-retry-delay 40 flapping-delay 120 activatedThe following is sample output from the show ip bgp bmp server command for server number 2. The attributes displayed are configured in the BMP server configuration mode:
Device# show ip bgp bmp server 2 Print detailed info for 1 server number 2. bmp server 2 address: 20.1.1.1 port 9000 description SERVER2 up time 00:06:23 session-startup route-refresh initial-delay 20 failure-retry-delay 40 flapping-delay 120 activatedThe following is sample output from the show ip bgp bmp server summary command after deactivating the BMP server 1 and 2 connections:
Device# show ip bgp bmp server summary Number of BMP servers configured: 2 Number of BMP neighbors configured: 10 Number of neighbors on TransitionQ: 0, MonitoringQ: 0, ConfigQ: 0 Number of BMP servers on StatsQ: 0 BMP Refresh not in progress, refresh not scheduled Initial Refresh Delay configured, refresh value 3s BMP buffer size configured, buffer size 2048 MB, buffer size bytes used 0 MB ID Host/Net Port TCB Status Uptime MsgSent LastStat 1 10.1.1.1 8000 0x0 Down 0 2 20.1.1.1 9000 0x0 Down 0The following is sample output from the show ip bgp bmp neighbors command, which shows the status of the BGP BMP neighbors after reactivating the BMP server 1 and 2 connections:
Device# show ip bgp bmp server neighbors Number of BMP neighbors configured: 10 BMP Refresh not in progress, refresh not scheduled Initial Refresh Delay configured, refresh value 3s BMP buffer size configured, buffer size 2048 MB, buffer size bytes used 0 MB Neighbor PriQ MsgQ CfgSvr# ActSvr# RM Sent 30.1.1.1 0 0 1 2 1 2 16 2001:DB8::2001 0 0 1 2 1 2 15 40.1.1.1 0 0 1 2 1 2 26 2001:DB8::2002 0 0 1 2 1 2 15 50.1.1.1 0 0 1 2 1 2 16 60.1.1.1 0 0 1 2 1 2 26 2001:DB8::2002 0 0 1 1 9 70.1.1.1 0 0 2 2 12 Neighbor PriQ MsgQ CfgSvr# ActSvr# RM Sent 80.1.1.1 0 0 1 1 10 2001:DB8::2002 0 0 1 2 1 2 16show ip bgp all dampening
To display BGP dampening information, use the show ip bgp all dampeningcommand in user EXEC or privileged EXEC mode.
show ip bgp all dampening { dampened-paths | flap-statistics [ filter-list filter-list | quote-regexp regexp | regexp regexp ] | parameters }
Syntax Description
dampened-paths
Display routes suppressed due to dampening.
flap-statistics
Displays flap statistics of routes.
filter-list filter-list
(Optional) Used with the flap-statistics keyword, displays routes that conform to the specified filter list in the range 1-500.
quote-regexp regexp
(Optional) Used with the flap-statistics keyword, displays routes matching the AS path “regular expression”.
regexp regexp
(Optional) Used with the flap-statistics keyword, displays routes matching the AS path regular expression.
parameters
Display details of configured dampening parameters.
Examples
The following example show how to display the BGP dampening parameters.
Router# show ip bgp all dampening parameters For address family: IPv4 Unicast % dampening not enabled for base For address family: VPNv4 Unicast % dampening not enabled for base For vrf: Cust_A dampening 15 750 2000 60 (DEFAULT) Half-life time : 15 mins Decay Time : 2320 secs Max suppress penalty: 12000 Max suppress time: 60 mins Suppress penalty : 2000 Reuse penalty : 750 For vrf: Cust_B dampening 15 750 2000 60 (DEFAULT) Half-life time : 15 mins Decay Time : 2320 secs Max suppress penalty: 12000 Max suppress time: 60 mins Suppress penalty : 2000 Reuse penalty : 750 For address family: IPv4 Multicast % dampening not enabled for base Router#The table below describes the significant fields shown in the display.
Table 4 show ip bgp all dampening Field Descriptions Field
Description
Half-life time
Time after which a penalty is decreased, in minutes. Once the interface has been assigned a penalty, the penalty is decreased by half after the half-life period. The process of reducing the penalty happens every 5 seconds. The range of the half-life is 1 to 45 minutes. The default is 1 minute.
Decay Time
Penalty value below which an unstable interface is unsuppressed, in seconds. The process of unsuppressing routers occurs at 10-second increments. The range of the reuse value is 1 to 20000 seconds. The default value is 750 seconds.
Max suppress penalty
Limit at which an interface is suppressed when its penalty exceeds that limit, in seconds. The default value is 2000 seconds.
Max suppress time
Maximum time that an interface can be suppressed, in minutes. This value effectively acts as a ceiling that the penalty value cannot exceed. The default value is four times the half-life period.
The following is sample output for the show ip bgp all dampening dampened-paths command. The output includes dampened paths for individual VRFs.
Router# show ip bgp all dampening dampened-paths For address family: IPv4 Unicast % dampening not enabled for base For address family: VPNv4 Unicast % dampening not enabled for base For vrf: Cust_A BGP table version is 42, local router ID is 144.124.23.2 Status codes: s suppressed, d damped, h history, * valid, > best, i - internal, r RIB-failure, S Stale, m multipath, b backup-path, x best-external Origin codes: i - IGP, e - EGP, ? - incomplete Network From Reuse Path Route Distinguisher: 1:100 (Cust_A) *d 10.10.10.10/32 172.16.1.2 00:04:49 65001 ? *d 20.20.20.20/32 172.16.1.2 00:04:59 65001 ? For address family: IPv4 Multicast % dampening not enabled for baseshow ip bgp cidr-only
To display routes with classless interdomain routing (CIDR), use the show ip bgp cidr-only command in user EXEC or privileged EXEC mode.
Command History
Release
Modification
10.0
This command was introduced.
12.2(31)SB
This command was integrated into Cisco IOS Release 12.2(31)SB.
12.2(33)SRA
This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2SX
This command is supported in the Cisco IOS Release 12.2SX train. Support in a specific 12.2SX release of this train depends on your feature set, platform, and platform hardware.
Examples
The following is sample output from the show ip bgp cidr-only command in privileged EXEC mode:
Router# show ip bgp cidr-only BGP table version is 220, local router ID is 172.16.73.131 Status codes: s suppressed, * valid, > best, i - internal Origin codes: i - IGP, e - EGP, ? - incomplete Network Next Hop Metric LocPrf Weight Path *> 192.168.0.0/8 172.16.72.24 0 1878 ? *> 172.16.0.0/16 172.16.72.30 0 108 ?The table below describes the significant fields shown in the display.
Table 5 show ip bgp cidr-only Field Descriptions Field
Description
BGP table version is 220
Internal version number of the table. This number is incremented whenever the table changes.
local router ID
IP address of the router.
Status codes
Status of the table entry. The status is displayed at the beginning of each line in the table. It can be one of the following values:
s—The table entry is suppressed.
*—The table entry is valid.
>—The table entry is the best entry to use for that network.
i—The table entry was learned via an internal BGP (iBGP) session.
Origin codes
Origin of the entry. The origin code is placed at the end of each line in the table. It can be one of the following values:
i—Entry originated from an Interior Gateway Protocol (IGP) and was advertised with a network router configuration command.
e—Entry originated from an Exterior Gateway Protocol (EGP).
?—Origin of the path is not clear. Usually, this is a router that is redistributed into BGP from an IGP.
Network
Internet address of the network the entry describes.
Next Hop
IP address of the next system that is used when forwarding a packet to the destination network. An entry of 0.0.0.0 indicates that the access server has some non-BGP route to this network.
Metric
If shown, the value of the interautonomous system metric.
LocPrf
Local preference value as set with the set local-preference route-map configuration command. The default value is 100.
Weight
Weight of the route as set via autonomous system filters.
Path
Autonomous system paths to the destination network. There can be one entry in this field for each autonomous system in the path. At the end of the path is the origin code for the path:
i—The entry was originated with the IGP and advertised with a network router configuration command.
e—The route originated with EGP.
?—The origin of the path is not clear. Usually this is a path that is redistributed into BGP from an IGP.
show ip bgp cluster-ids
To display the cluster IDs applied to any neighbor and other cluster information, use the show ip bgp cluster-ids command in user EXEC or privileged EXEC mode.
Usage Guidelines
Use this command to display cluster IDs, including the number of neighbors using each cluster ID, and those cluster IDs for which intracluster client-to-client route reflection has been disabled.
Examples
The following is sample output for the show ip bgp cluster-ids command:
Device# show ip bgp cluster-id Global cluster-id: 1.1.1.10 (configured: 0.0.0.0) BGP client-to-client reflection: Configured Used all (inter-cluster and intra-cluster): ENABLED intra-cluster: ENABLED ENABLED List of cluster-ids: Cluster-id #-neighbors C2C-rfl-CFG C2C-rfl-USE 0.0.0.1 1 ENABLED ENABLED 0.0.0.2 1 DISABLED DISABLED 0.0.0.3 1 DISABLED DISABLED 0.0.0.4 0 DISABLED DISABLEDThe table below describes the significant fields shown in the display.
Table 6 show ip bgp cluster-ids Field Descriptions Field
Description
Global cluster-id
Global cluster ID, which is either configured by the bgp cluster-id command or, in the absence of such configuration, the router ID of the local route reflector.
configured:
Global cluster ID configured by the bgp cluster-id command. The cluster ID 0.0.0.0 means no cluster ID was configured, so the router ID is used as the default cluster ID.
BGP client-to-client reflection:
Configured and Used are column headings for the data below them. Because of the order in which the software processes the commands, what is configured might not be what is used. See the bgp client-to-client reflection intra-cluster command for the rules that determine whether reflection is enabled or not.
all (inter-cluster and intra-cluster):
Intracluster and intercluster client-to-client reflection is ENABLED (which is the default) or DISABLED by the bgp client-to-client reflection command.
intra-cluster:
Intracluster client-to-client reflection is ENABLED (which is the default) or DISABLED by the bgp client-to-client reflection intra-cluster command. Values are displayed for what is Configured and what is Used because they could be different values. See the bgp client-to-client reflection intra-cluster command for the rules that determine whether reflection is enabled or not.
List of cluster-ids: Cluster-id
Cluster IDs configured on the device.
#-neighbors
Number of neighbors that are using each cluster ID (regardless of whether the cluster ID is configured directly or by a template).
C2C-rfl-CFG
Client-to-client reflection configured displays ENABLED (the default) or DISABLED, based on what is configured.
C2C-rfl-USE
Client-to-client reflection used displays ENABLED (the default) or DISABLED, based on what command value is used. See the bgp client-to-client reflection intra-cluster command for the rules that determine whether reflection is enabled or not.
Related Commands
Command
Description
bgp client-to-client reflection
Enables route reflection from a BGP route reflector to clients.
bgp client-to-client reflection intra-cluster
Enables intracluster client-to-client route reflection to clients for the specified clusters.
bgp cluster-id
Sets the global cluster ID on a route reflector.
neighbor cluster-id
Sets a cluster ID for a neighbor.
show ip bgp community
To display routes that belong to specified BGP communities, use the show ip bgp community command in user EXEC or privileged EXEC mode.
Syntax Description
community-number
(Optional) Displays routes that have a community number in the range from 1 to 4294967200, or AA:NN (autonomous system-community number/2-byte number).
gshut
(Optional) Displays routes that have the well-known Graceful Shutdown (GSHUT) community.
local-as
(Optional) Displays routes that have the well-known local-AS community, which means do not send outside the local autonomous system.
no-advertise
(Optional) Displays routes that have the well-known no-advertise community, which means do not advertise to any peer.
no-export
(Optional) Displays routes that have the well-known no-export community, which means do not export to the next autonomous system.
exact
(Optional) Displays only routes that have the same communities as the communities specified in this command.
Command History
Release
Modification
10.3
This command was introduced.
12.0
This command was modified. The local-as community was added.
12.2(33)SRA
This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2SX
This command is supported in the Cisco IOS Release 12.2SX train. Support in a specific 12.2SX release of this train depends on your feature set, platform, and platform hardware.
15.2(2)S
This command was modified. The gshut keyword was added.
Cisco IOS XE Release 3.6S
This command was modified. The gshut keyword was added.
Cisco IOS XE Release 3.7S
This command was implemented on the Cisco ASR 903 router.
15.2(4)M
This command was integrated into Cisco IOS Release 15.2(4)M.
15.2(4)S
This command was implemented on the Cisco 7200 series router.
Examples
The following is sample output from the show ip bgp community command:
Router# show ip bgp community 111:12345 local-as BGP table version is 10, local router ID is 224.0.0.10 Status codes: s suppressed, d damped, h history, * valid, > best, i - internal Origin codes: i - IGP, e - EGP, ? - incomplete Network Next Hop Metric LocPrf Weight Path *> 172.16.2.2/32 10.43.222.2 0 0 222 ? *> 10.0.0.0 10.43.222.2 0 0 222 ? *> 10.43.0.0 10.43.222.2 0 0 222 ? *> 10.43.44.44/32 10.43.222.2 0 0 222 ? * 10.43.222.0/24 10.43.222.2 0 0 222 i *> 172.17.240.0/21 10.43.222.2 0 0 222 ? *> 192.168.212.0 10.43.222.2 0 0 222 i *> 172.31.1.0 10.43.222.2 0 0 222 ?The table below describes the significant fields shown in the display.
The following is sample output from the show ip bgp community gshut command:
Router# show ip bgp community gshut BGP table version is 44, local router ID is 87.87.87.87 Status codes: s suppressed, d damped, h history, * valid, > best, i - internal, r RIB-failure, S Stale, m multipath, b backup-path, f RT-Filter, x best-external, a additional-path, c RIB-compressed, Origin codes: i - IGP, e - EGP, ? - incomplete RPKI validation codes: V valid, I invalid, N Not found Network Next Hop Metric LocPrf Weight Path *> 1.1.1.1/32 192.168.10.1 0 65546 14 i *> 1.1.1.2/32 192.168.10.1 0 65546 14 i *> 1.1.1.3/32 192.168.10.1 0 65546 14 i *> 1.1.1.4/32 192.168.10.1 0 65546 14 i *> 1.1.1.5/32 192.168.10.1 0 65546 14 i *> 1.1.1.6/32 192.168.10.1 0 65546 14 i *> 1.1.1.7/32 192.168.10.1 0 65546 14 i *> 1.1.1.8/32 192.168.10.1 0 65546 14 i *> 1.1.1.9/32 192.168.10.1 0 65546 14 i *> 1.1.1.10/32 192.168.10.1 0 65546 14 i *> 2.2.2.2/32 192.168.10.1 0 65546 4260036618 i *> 2.2.2.3/32 192.168.10.1 0 65546 4260036618 i *> 2.2.2.4/32 192.168.10.1 0 65546 4260036618 i *> 2.2.2.5/32 192.168.10.1 0 65546 4260036618 ishow ip bgp community-list
To display routes that are permitted by the Border Gateway Protocol (BGP) community list, use the show ip bgp community-list command in user EXEC or privileged EXEC mode.
Command History
Release
Modification
10.3
This command was introduced.
12.0(10)S
Named community list support was added.
12.0(16)ST
Named community lists support was integrated into Cisco IOS Release 12.0(16)ST.
12.1(9)E
Named community lists support was integrated into Cisco IOS Release 12.1(9)E.
12.2(8)T
Named community lists support was integrated into Cisco IOS Release 12.2(8)T.
12.2(14)S
This command was integrated into Cisco IOS Release 12.2(14)S.
12.2(31)SB
This command was integrated into Cisco IOS Release 12.2(31)SB to support the Cisco 10000 Series Routers.
12.2(33)SRA
This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2SX
This command is supported in the Cisco IOS Release 12.2SX train. Support in a specific 12.2SX release of this train depends on your feature set, platform, and platform hardware.
Usage Guidelines
This command requires you to specify an argument when used. The exact-match keyword is optional.
Examples
The following is sample output of the show ip bgp community-list command in privileged EXEC mode:
Router# show ip bgp community-list 20 BGP table version is 716977, local router ID is 192.168.32.1 Status codes: s suppressed, * valid, > best, i - internal Origin codes: i - IGP, e - EGP, ? - incomplete Network Next Hop Metric LocPrf Weight Path * i10.3.0.0 10.0.22.1 0 100 0 1800 1239 ? *>i 10.0.16.1 0 100 0 1800 1239 ? * i10.6.0.0 10.0.22.1 0 100 0 1800 690 568 ? *>i 10.0.16.1 0 100 0 1800 690 568 ? * i10.7.0.0 10.0.22.1 0 100 0 1800 701 35 ? *>i 10.0.16.1 0 100 0 1800 701 35 ? * 10.92.72.24 0 1878 704 701 35 ? * i10.8.0.0 10.0.22.1 0 100 0 1800 690 560 ? *>i 10.0.16.1 0 100 0 1800 690 560 ? * 10.92.72.24 0 1878 704 701 560 ? * i10.13.0.0 10.0.22.1 0 100 0 1800 690 200 ? *>i 10.0.16.1 0 100 0 1800 690 200 ? * 10.92.72.24 0 1878 704 701 200 ? * i10.15.0.0 10.0.22.1 0 100 0 1800 174 ? *>i 10.0.16.1 0 100 0 1800 174 ? * i10.16.0.0 10.0.22.1 0 100 0 1800 701 i *>i 10.0.16.1 0 100 0 1800 701 i * 10.92.72.24 0 1878 704 701 iThe table below describes the significant fields shown in the display.
Table 8 show ip bgp community-list Field Descriptions Field
Description
BGP table version
Internal version number of the table. This number is incremented whenever the table changes.
local router ID
IP address of the router.
Status codes
Status of the table entry. The status is displayed at the beginning of each line in the table. It can be one of the following values:
s—The table entry is suppressed.
*—The table entry is valid.
>—The table entry is the best entry to use for that network.
i—The table entry was learned via an internal BGP (iBGP) session.
Origin codes
Origin of the entry. The origin code is placed at the end of each line in the table. It can be one of the following values:
i—Entry originated from an Interior Gateway Protocol (IGP) and was advertised with a network router configuration command.
e—Entry originated from an Exterior Gateway Protocol (EGP).
?—Origin of the path is not clear. Usually, this is a router that is redistributed into BGP from an IGP.
Network
IP address of a network entity.
Next Hop
IP address of the next system that is used when forwarding a packet to the destination network. An entry of 0.0.0.0 indicates that the router has some non-BGP routes to this network.
Metric
If shown, this is the value of the interautonomous system metric. This field is frequently not used.
LocPrf
Local preference value as set with the set local-preference route-map configuration command. The default value is 100.
Weight
Weight of the route as set via autonomous system filters.
Path
Autonomous system paths to the destination network. There can be one entry in this field for each autonomous system in the path.
show ip bgp dampened-paths
To display BGP dampened routes, use the show ip bgp dampened-paths command in user EXEC or privileged EXEC mode.
Command History
Release
Modification
11.0
This command was introduced.
12.2(33)SRA
This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2SX
This command is supported in the Cisco IOS Release 12.2SX train. Support in a specific 12.2SX release of this train depends on your feature set, platform, and platform hardware.
Usage Guidelines
On the Cisco 10000 series router, use the show ip bgp dampening dampened-paths command to display BGP dampened routes.
Examples
The following is sample output from the show ip bgp dampened-paths command in privileged EXEC mode:
Router# show ip bgp dampened-paths BGP table version is 10, local router ID is 172.29.232.182 Status codes: s suppressed, d damped, h history, * valid, > best, i - internal Origin codes: i - IGP, e - EGP, ? - incomplete Network From Reuse Path *d 10.0.0.0 172.16.232.177 00:18:4 100 ? *d 10.2.0.0 172.16.232.177 00:28:5 100 ?The table below describes the significant fields shown in the display.
Table 9 show ip bgp dampened-paths Field Descriptions Field
Description
BGP table version
Internal version number of the table. This number is incremented whenever the table changes.
local router
IP address of the router where route dampening is enabled.
*d
Route to the network indicated is dampened.
From
IP address of the peer that advertised this path.
Reuse
Time (in hours:minutes:seconds) after which the path will be made available.
Path
Autonomous system path of the route that is being dampened.
show ip bgp dampening dampened-paths
To display Border Gateway Protocol (BGP) dampened routes on the Cisco 10000 series router, use the show ip bgp dampening dampened-paths command in user EXEC or privileged EXEC mode.
Usage Guidelines
For router platforms other than the Cisco 10000 series router, use the show ip bgp dampened-paths command to display BGP dampened routes.
Examples
The following example show how to display BGP dampened routes information:
Router# show ip bgp dampening dampened-paths BGP table version is 10, local router ID is 172.29.232.182 Status codes: s suppressed, d damped, h history, * valid, > best, i - internal Origin codes: i - IGP, e - EGP, ? - incomplete Network From Reuse Path *d 10.0.0.0 172.16.232.177 00:18:4 100 ? *d 10.2.0.0 172.16.232.177 00:28:5 100 ?The table below describes the significant fields shown in the display.
Table 10 show ip bgp dampening dampened-paths Field Descriptions Field
Description
BGP table version
Internal version number of the table. This number is incremented whenever the table changes.
local router ID
IP address of the router where route dampening is enabled.
*d
Route to the network is dampened.
From
IP address of the peer that advertised this path.
Reuse
Time (in hours:minutes:seconds) after which the path will be made available.
Path
Autonomous system (AS) path of the route that is being dampened.
Related Commands
Command
Description
bgp dampening
Enables BGP route dampening or changes various BGP route dampening factors.
clear ip bgp dampening
Clears BGP route dampening information and unsuppresses the suppressed routes.
show dampening interface
Displays a summary of the dampening parameters and status.
show ip bgp dampened-paths
Displays IPv6 Border Gateway Protocol (BGP) dampened routes.
show ip bgp dampening flap-statistics
To display Border Gateway Protocol (BGP) flap statistics for all paths on the Cisco 10000 series router, use the show ip bgp dampening flap-statistics command in privileged EXEC mode.
show ip bgp dampening flap-statistics [ ip-address [mask] | cidr-only | filter-list access-list-number | injected-paths | labels | prefix-list prefix-list | quote-regexp regexp | regexp regexp | route-map route-map-name | template { peer-policy template-name | peer-session template-name } ]
Syntax Description
ip-address
(Optional) IP address for the flap statistics that you want to display.
mask
(Optional) Mask to filter or match hosts that are part of the specified network.
cidr-only
(Optional) Displays flap statistics for routes with classless interdomain routing (CIDR).
filter-list access-list-number
(Optional) Displays flap statistics for routes that conform to the specified autonomous system (AS) path access list number.
injected-paths
(Optional) Displays flap statistics for all injected paths.
labels
(Optional) Displays flap statistics for IPv4 Network Layer Reachability Information (NLRI) labels.
prefix-list prefix-list
(Optional) Filters output based on the specified prefix list.
quote-regexp regexp
(Optional) Filters output based on the specified quoted expression.
regexp regexp
(Optional) Filters output based on the specified regular expression.
route-map route-map-name
(Optional) Filters output based on the specified route map.
template
(Optional) Displays peer-policy or peer-session template information.
peer-policy template-name
(Optional) Used with the template keyword, displays peer-policy template information for the specified template name.
peer-session template-name
(Optional) Used with the template keyword, displays peer-session template information for the specified template name.
Usage Guidelines
For router platforms other than the Cisco 10000 series router, use the show ip bgp flap-statistics command to display BGP flap statistics.
Examples
The following example show how to display the BGP flap statistics for routes with non-natural network masks (CIDR):
Router# show ip bgp dampening flap-statistics cidr-only BGP table version is 56, local router ID is 100.10.7.11 Status codes: s suppressed, d damped, h history, * valid, > best, i - internal, r RIB-failure, S Stale Origin codes: i - IGP, e - EGP, ? - incomplete Network Next Hop Metric LocPrf Weight Path *>i205.0.5.0/30 100.10.5.11 0 100 0 i *>i205.0.5.4/30 205.0.5.1 0 100 0 105 ? *>i205.10.5.9/32 205.0.5.1 2 100 0 105 ? *>i205.10.5.13/32 205.0.5.1 2 100 0 105 ? *>i206.0.6.0/30 100.10.5.11 0 100 0 i *>i206.0.6.4/30 206.0.6.1 0 100 0 106 ? *>i206.10.6.9/32 206.0.6.1 2 100 0 106 ? *>i206.10.6.13/32 206.0.6.1 2 100 0 106 ? *> 207.0.7.0/30 0.0.0.0 0 32768 i *> 207.0.7.4/30 207.0.7.1 0 0 107 ? *> 207.10.7.9/32 207.0.7.1 2 0 107 ? *> 207.10.7.13/32 207.0.7.1 2 0 107 ? *> 208.0.8.0/30 0.0.0.0 0 32768 i *> 208.0.8.4/30 208.0.8.1 0 0 108 ? *> 208.10.8.9/32 208.0.8.1 2 0 108 ? *> 208.10.8.13/32 208.0.8.1 2 0 108 ?The table below describes the significant fields shown in the display.
Table 11 show ip bgp dampening flap-statistics cidr-only Field Descriptions Field
Description
BGP table version
Internal version number of the table. This number is incremented whenever the table changes.
local router ID
IP address of the router where route dampening is enabled.
Status codes
Status of the table entry. The status is displayed at the beginning of each line in the table. It can be one of the following values:
s—The table entry is suppressed.
*—The table entry is valid.
>—The table entry is the best entry to use for that network.
i—The table entry was learned via an internal BGP (iBGP) session.
Network
Internet address of the network that the entry describes.
Next Hop
IP address of the next system that is used when forwarding a packet to the destination network. An entry of 0.0.0.0 indicates that the access server has some non-BGP route to this network.
Metric
If shown, the value of the interautonomous system metric.
LocPrf
Local preference value as set with the set local-preference route-map configuration command. The default value is 100.
Weight
Weight of the route as set via autonomous system filters.
Path
Autonomous system paths to the destination network. There can be one entry in this field for each autonomous system in the path. At the end of the path is the origin code for the path:
i—The entry was originated with the IGP and advertised with a network router configuration command.
e—The route originated with EGP.
?—The origin of the path is not clear. Usually this is a path that is redistributed into BGP from an IGP.
Related Commands
Command
Description
bgp dampening
Enables BGP route dampening or changes various BGP route dampening factors.
clear ip bgp flap-statistics
Clears BGP flap statistics.
show dampening interface
Displays a summary of the dampening parameters and status.
show ip bgpflap-statistics
Displays BGP flap statistics.
show ip bgp dampening parameters
To display detailed Border Gateway Protocol (BGP) dampening information on the Cisco 10000 series router, use the show ip bgp dampening parameters command in privileged EXEC mode.
Examples
The following example shows how to display detailed BGP dampening information:
Router# show ip bgp dampening parameters dampening 15 750 2000 60 (DEFAULT) Half-life time : 15 mins Decay Time : 2320 secs Max suppress penalty: 12000 Max suppress time: 60 minsThe table below describes the significant fields shown in the display.
Table 12 show ip bgp dampening parameters Field Descriptions Field
Description
Half-life time
Time after which a penalty is decreased, in minutes. Once the interface has been assigned a penalty, the penalty is decreased by half after the half-life period. The process of reducing the penalty happens every 5 seconds. The range of the half-life period is 1 to 45 minutes. The default is 1 minute.
Decay Time
Penalty value below which an unstable interface is unsuppressed, in seconds. The process of unsupressing routers occurs at 10 second increments. The range of the reuse value is 1 to 20000 seconds. The default value is 750 seconds.
Max suppress penalty
Limit at which an interface is suppressed when its penalty exceeds that limit, in seconds. The default value is 2000 seconds.
Max suppress time
Maximum time that an interface can be suppressed, in minutes. This value effectively acts as a ceiling that the penalty value cannot exceed. The default value is four times the half-life period.
show ip bgp extcommunity-list
To display routes that match the extended community list in the Border Gateway Protocol (BGP) routing table, use the show ip bgp extcommunity-list command in user EXEC or privileged EXEC mode.
Command History
Release
Modification
12.3(11)T
This command was introduced.
12.2(27)SBC
This command was integrated into the Cisco IOS Release 12.2(27)SBC.
12.2(33)SRA
This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2(33)SXH
This command was integrated into Cisco IOS Release 12.2(33)SXH.
Cisco IOS XE Release 2.3
This command was integrated into Cisco IOS XE Release 2.3.
Usage Guidelines
You need to configure the extended community lists by using the ip extcommunity-list command for the show ip bgp extcommunity-list command to display the output.
Examples
The following is sample output from the show ip bgp extcommunity-listcommand:
Router# show ip bgp extcommunity-list 1 Standard extended community-list list1 9 permit RT:1:100 RT:2:100 19 deny RT:5:100 RT:6:200 29 permit RT:4:100 39 permit RT:5:900 49 permit RT:4:100 RT:6:200The table below describes the significant fields shown in the display.
Table 13 show ip bgp extcommunity-list Field Descriptions Field
Description
Standard extended community-list
The standard named extended community list.
permit
Permits access for a matching condition. Once a permit value has been configured to match a given set of extended communities, the extended community list defaults to an implicit deny for all other values.
RT
The route target (RT) extended community attribute.
deny
Denies access for a matching condition.
show ip bgp filter-list
To display routes that conform to a specified filter list, use the show ip bgp filter-list command in EXEC mode.
Command History
Release
Modification
10.0
This command was introduced.
12.2(31)SB
This command was integrated into Cisco IOS Release 12.2(31)SB.
12.2(33)SRA
This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2SX
This command is supported in the Cisco IOS Release 12.2SX train. Support in a specific 12.2SX release of this train depends on your feature set, platform, and platform hardware.
Examples
The following is sample output from the show ip bgp filter-list command in privileged EXEC mode:
Router# show ip bgp filter-list 2 BGP table version is 1738, local router ID is 172.16.72.24 Status codes: s suppressed, * valid, > best, i - internal Origin codes: i - IGP, e - EGP, ? - incomplete Network Next Hop Metric LocPrf Weight Path * 172.16.0.0 172.16.72.30 0 109 108 ? * 172.16.1.0 172.16.72.30 0 109 108 ? * 172.16.11.0 172.16.72.30 0 109 108 ? * 172.16.14.0 172.16.72.30 0 109 108 ? * 172.16.15.0 172.16.72.30 0 109 108 ? * 172.16.16.0 172.16.72.30 0 109 108 ? * 172.16.17.0 172.16.72.30 0 109 108 ? * 172.16.18.0 172.16.72.30 0 109 108 ? * 172.16.19.0 172.16.72.30 0 109 108 ? * 172.16.24.0 172.16.72.30 0 109 108 ? * 172.16.29.0 172.16.72.30 0 109 108 ? * 172.16.30.0 172.16.72.30 0 109 108 ? * 172.16.33.0 172.16.72.30 0 109 108 ? * 172.16.35.0 172.16.72.30 0 109 108 ? * 172.16.36.0 172.16.72.30 0 109 108 ? * 172.16.37.0 172.16.72.30 0 109 108 ? * 172.16.38.0 172.16.72.30 0 109 108 ? * 172.16.39.0 172.16.72.30 0 109 108 ?The table below describes the significant fields shown in the display.
Table 14 show ip bgp filter-list Field Descriptions Field
Description
BGP table version
Internal version number of the table. This number is incremented whenever the table changes.
local router ID
IP address of the router.
Status codes
Status of the table entry. The status is displayed at the beginning of each line in the table. It can be one of the following values:
s—The table entry is suppressed.
*—The table entry is valid.
>—The table entry is the best entry to use for that network.
i—The table entry was learned via an internal BGP (iBGP) session.
Origin codes
Origin of the entry. The origin code is placed at the end of each line in the table. It can be one of the following values:
i—Entry originated from an Interior Gateway Protocol (IGP) and was advertised with a network router configuration command.
e—Entry originated from an Exterior Gateway Protocol (EGP).
?—Origin of the path is not clear. Usually, this is a router that is redistributed into BGP from an IGP.
Network
Internet address of the network the entry describes.
Next Hop
IP address of the next system that is used when forwarding a packet to the destination network. An entry of 0.0.0.0 indicates that the router has some non-BGP route to this network.
Metric
If shown, this is the value of the interautonomous system metric. This field is frequently not used.
LocPrf
Local preference value as set with the set local-preference route-map configuration command. The default value is 100.
Weight
Weight of the route as set via autonomous system filters.
Path
Autonomous system paths to the destination network. There can be one entry in this field for each autonomous system in the path. At the end of the path is the origin code for the path:
i—The entry was originated with the IGP and advertised with a network router configuration command.
e—The route originated with EGP.
?—The origin of the path is not clear. Usually this is a path that is redistributed into BGP from an IGP.
show ip bgp flap-statistics
show ip bgp flap-statistics [ regexp regexp | filter-list access-list | ip-address mask [ longer-prefix ] ]
Syntax Description
regexp regexp
(Optional) Clears flap statistics for all the paths that match the regular expression.
filter-list access-list
(Optional) Clears flap statistics for all the paths that pass the access list.
ip-address
(Optional) Clears flap statistics for a single entry at this IP address.
mask
(Optional) Network mask applied to the value.
longer-prefix
(Optional) Displays flap statistics for more specific entries.
Command History
Release
Modification
11.0
This command was introduced.
12.2(33)SRA
This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2SX
This command is supported in the Cisco IOS Release 12.2SX train. Support in a specific 12.2SX release of this train depends on your feature set, platform, and platform hardware.
Usage Guidelines
If no arguments or keywords are specified, the router displays flap statistics for all routes.
Examples
The following is sample output from the show ip bgp flap-statistics command in privileged EXEC mode:
Router# show ip bgp flap-statistics BGP table version is 10, local router ID is 172.29.232.182 Status codes: s suppressed, d damped, h history, * valid, > best, i - internal Origin codes: i - IGP, e - EGP, ? - incomplete Network From Flaps Duration Reuse Path *d 10.0.0.0 172.29.232.177 4 00:13:31 00:18:10 100 *d 10.2.0.0 172.29.232.177 4 00:02:45 00:28:20 100The table below describes the significant fields shown in the display.
Table 15 show ip bgp flap-statistics Field Descriptions Field
Description
BGP table version
Internal version number of the table. This number is incremented whenever the table changes.
local router ID
IP address of the router where route dampening is enabled.
Network
Route to the network indicated is dampened.
From
IP address of the peer that advertised this path.
Flaps
Number of times the route has flapped.
Duration
Time (in hours:minutes:seconds) since the router noticed the first flap.
Reuse
Time (in hours:minutes:seconds) after which the path will be made available.
Path
Autonomous system path of the route that is being dampened.
show ip bgp inconsistent-as
To display routes with inconsistent originating autonomous systems, use the show ip bgp inconsistent-as command in EXEC mode.
Command History
Release
Modification
11.0
This command was introduced.
12.2(31)SB
This command was integrated into Cisco IOS Release 12.2(31)SB.
12.2(33)SRA
This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2SX
This command is supported in the Cisco IOS Release 12.2SX train. Support in a specific 12.2SX release of this train depends on your feature set, platform, and platform hardware.
Examples
The following is sample output from the show ip bgp inconsistent-as command in privileged EXEC mode:
Router# show ip bgp inconsistent-as BGP table version is 87, local router ID is 172.19.82.53 Status codes: s suppressed, * valid, > best, i - internal Origin codes: i - IGP, e - EGP, ? - incomplete Network Next Hop Metric LocPrf Weight Path * 10.1.0.0 172.29.232.55 0 0 300 88 90 99 ? *> 172.29.232.52 2222 0 400 ? * 172.29.0.0 172.29.232.55 0 0 300 90 99 88 200 ? *> 172.29.232.52 2222 0 400 ? * 10.200.199.0 172.29.232.55 0 0 300 88 90 99 ? *> 172.29.232.52 2222 0 400 ?show ip bgp injected-paths
To display all the injected paths in the Border Gateway Protocol (BGP) routing table, use the show ip bgp injected-paths command in user or privileged EXEC mode.
Examples
The following is sample output from the show ip bgp injected-paths command in EXEC mode:
Router# show ip bgp injected-paths BGP table version is 11, local router ID is 10.0.0.1 Status codes:s suppressed, d damped, h history, * valid, > best, i - internal Origin codes:i - IGP, e - EGP, ? - incomplete Network Next Hop Metric LocPrf Weight Path *> 172.16.0.0 10.0.0.2 0 ? *> 172.17.0.0/16 10.0.0.2 0 ?The table below describes the significant fields shown in the display.
Table 16 show ip bgp injected-paths Field Descriptions Field
Description
BGP table version
Internal version number of the table. This number is incremented whenever the table changes.
local router ID
IP address of the router.
Status codes
Status of the table entry. The status is displayed at the beginning of each line in the table. It can be one of the following values:
s—The table entry is suppressed.
d—The table entry is dampened.
h—The table entry history.
*—The table entry is valid.
>—The table entry is the best entry to use for that network.
i—The table entry was learned via an internal BGP (iBGP) session.
Origin codes
Origin of the entry. The origin code is placed at the end of each line in the table. It can be one of the following values:
i—Entry originated from an Interior Gateway Protocol (IGP) and was advertised with a network router configuration command.
e—Entry originated from an Exterior Gateway Protocol (EGP).
?—Origin of the path is not clear. Usually, this is a router that is redistributed into BGP from an IGP.
Network
IP address of a network entity.
Next Hop
IP address of the next system that is used when forwarding a packet to the destination network. An entry of 0.0.0.0 indicates that the router has some non-BGP routes to this network.
Metric
The Multi Exit Discriminator (MED) metric for the path. (The name of this metric for BGP versions 2 and 3 is INTER_AS.)
LocPrf
Local preference value as set with the set local-preference route-map configuration command. The default value is 100.
Weight
Weight of the route as set via autonomous system filters.
Path
Autonomous system paths to the destination network. There can be one entry in this field for each autonomous system in the path.
show ip bgp ipv4
To display entries in the IP version 4 (IPv4) Border Gateway Protocol (BGP) routing table, use the show ip bgp ipv4 command in privileged EXEC mode.
show ip bgp ipv4 { mdt { all | rd route-distinguisher | vrf vrf-name } | mvpn { all | rd route-distinguisher | vrf vrf-name } | unicast prefix | multicast prefix | tunnel }
Syntax Description
mdt
Displays entries for multicast distribution tree (MDT) sessions.
all
Displays all the entries in the routing table.
rd route-distinguisher
Displays information about the specified VPN route distinguisher.
vrf vrf-name
Displays information about the specified VRF.
mvpn
Displays entries for multicast VPN (MVPN) sessions.
unicast
Displays entries for unicast sessions.
prefix
Displays entries for the specified prefix.
multicast
Displays entries for multicast sessions.
tunnel
Displays entries for tunnel sessions.
Command History
Release
Modification
12.0(7)T
This command was introduced.
12.0(29)S
This command was modified. The mdt keyword was added.
12.2(33)SRA
This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2(31)SB2
This command was integrated into Cisco IOS Release 12.2(31)SB2.
12.2SX
This command is supported in the Cisco IOS Release 12.2SX train. Support in a specific 12.2SX release of this train depends on your feature set, platform, and platform hardware.
12.4(20)T
This command was modified. The mdt keyword was added.
15.2(1)S
This command was modified. An RPKI validation code is displayed per network, if one applies.
Cisco IOS XE 3.5S
This command was modified. An RPKI validation code is displayed per network, if one applies.
Cisco IOS XE 3.7S
This command was modified. Imported paths from a VRF table to the global routing table are displayed, if any.
15.2(4)S
This command was implemented on the Cisco 7200 series routers.
Cisco IOS XE 3.8S
This command was modified. The mvpn keyword was added.
Examples
The following is sample output from the show ip bgp ipv4 unicast command:
Router# show ip bgp ipv4 unicast BGP table version is 4, local router ID is 10.0.40.1 Status codes: s suppressed, d damped, h history, * valid, > best, i - internal Origin codes: i - IGP, e - EGP, ? - incomplete Network Next Hop Metric LocPrf Weight Path *> 10.10.10.0/24 172.16.10.1 0 0 300 i *> 10.10.20.0/24 172.16.10.1 0 0 300 i * 10.20.10.0/24 172.16.10.1 0 0 300 iThe following is sample output from the show ip bgp ipv4 multicast command:
Router# show ip bgp ipv4 multicast BGP table version is 4, local router ID is 10.0.40.1 Status codes: s suppressed, d damped, h history, * valid, > best, i - internal Origin codes: i - IGP, e - EGP, ? - incomplete Network Next Hop Metric LocPrf Weight Path *> 10.10.10.0/24 172.16.10.1 0 0 300 i *> 10.10.20.0/24 172.16.10.1 0 0 300 i * 10.20.10.0/24 172.16.10.1 0 0 300 iThe table below describes the significant fields shown in the display.
The following is sample output from the show ip bgp ipv4 unicast prefix command. The output indicates the imported path information from a VRF named vpn1.
Device# show ip bgp ipv4 unicast 150.1.1.0 BGP routing table entry for 150.1.1.0/24, version 2 Paths: (1 available, best #1, table default) Not advertised to any peer Refresh Epoch 1 65002, imported path from 1:1:150.1.1.0/24 (vpn1) 4.4.4.4 (metric 11) from 4.4.4.4 (4.4.4.4) Origin IGP, metric 0, localpref 100, valid, internal, best Extended Community: RT:1:1 mpls labels in/out nolabel/16show ip bgp ipv4 multicast
To display IP Version 4 multicast database-related information, use the show ip bgp ipv4 multicast command in EXEC mode.
Command History
Release
Modification
12.0(7)T
This command was introduced.
12.2(31)SB
This command was integrated into Cisco IOS Release 12.2(31)SB.
12.2(33)SRA
This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2SX
This command is supported in the Cisco IOS Release 12.2SX train. Support in a specific 12.2SX release of this train depends on your feature set, platform, and platform hardware.
Usage Guidelines
Use this command in conjunction with the show ip rpf command to determine if IP multicast routing is using multiprotocol BGP routes.
To determine which multiprotocol BGP commands are supported by the show ip bgp ipv4 multicast command, enter the following command while in EXEC mode:
Router# show ip bgp ipv4 multicast ?The show ip bgp ipv4 multicast command replaces the show ip mbgp command.
Examples
The following is sample output from the show ip bgp ipv4 multicast command:
Router# show ip bgp ipv4 multicast MBGP table version is 6, local router ID is 192.168.200.66 Status codes: s suppressed, d damped, h history, * valid, > best, i - internal Origin codes: i - IGP, e - EGP, ? - incomplete Network Next Hop Metric LocPrf Weight Path *> 10.0.20.16/28 0.0.0.0 0 0 32768 i *> 10.0.35.16/28 0.0.0.0 0 0 32768 i *> 10.0.36.0/28 0.0.0.0 0 0 32768 i *> 10.0.48.16/28 0.0.0.0 0 0 32768 i *> 10.2.0.0/16 0.0.0.0 0 0 32768 i *> 10.2.1.0/24 0.0.0.0 0 0 32768 i *> 10.2.2.0/24 0.0.0.0 0 0 32768 i *> 10.2.3.0/24 0.0.0.0 0 0 32768 i *> 10.2.7.0/24 0.0.0.0 0 0 32768 i *> 10.2.8.0/24 0.0.0.0 0 0 32768 i *> 10.2.10.0/24 0.0.0.0 0 0 32768 i *> 10.2.11.0/24 0.0.0.0 0 0 32768 i *> 10.2.12.0/24 0.0.0.0 0 0 32768 i *> 10.2.13.0/24 0.0.0.0 0 0 32768 iThe table below describes the significant fields shown in the display.
Table 18 show ip bgp ipv4 multicast Field Descriptions Field
Description
MBGP table version
Internal version number of the table. This number is incremented whenever the table changes.
local router ID
IP address of the router.
Status codes
Status of the table entry. The status is displayed at the beginning of each line in the table. It can be one of the following values:
s—The table entry is suppressed.
d—The table entry is dampened.
h--The table entry is historical.
*—The table entry is valid.
>—The table entry is the best entry to use for that network.
i—The table entry was learned via an internal BGP (iBGP) session.
Origin codes
Origin of the entry. The origin code is placed at the end of each line in the table. It can be one of the following values:
i—Entry originated from an Interior Gateway Protocol (IGP) and was advertised with a network router configuration or address family configuration command.
e—Entry originated from an Exterior Gateway Protocol (EGP).
?—Origin of the path is not clear. Usually, this is a router that is redistributed into BGP from an IGP.
Network
IP address of a network entity.
Next Hop
IP address of the next system that is used when forwarding a packet to the destination network. An entry of 0.0.0.0 indicates that the router has some non-BGP routes to this network.
Metric
If shown, the value of the interautonomous system metric.
LocPrf
Local preference value as set with the set local-preference route-map configuration command. The default value is 100.
Weight
Weight of the route as set via autonomous system filters.
Path
Autonomous system paths to the destination network. There can be one entry in this field for each autonomous system in the path.
show ip bgp ipv4 multicast summary
To display a summary of IP Version 4 multicast database-related information, use the show ip bgp ipv4 multicast summary command in EXEC mode.
Command History
Release
Modification
12.0(7)T
This command was introduced.
12.2(31)SB
This command was integrated into Cisco IOS Release 12.2(31)SB.
12.2(33)SRA
This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2SX
This command is supported in the Cisco IOS Release 12.2SX train. Support in a specific 12.2SX release of this train depends on your feature set, platform, and platform hardware.
Usage Guidelines
The show ip bgp ipv4 multicast summary command replaces the show ip mbgp summary command.
Examples
The following is sample output from the show ip bgp ipv4 multicast summary command:
Router# show ip bgp ipv4 multicast summary BGP router identifier 10.0.33.34, local AS number 34 BGP table version is 5, main routing table version 1 4 network entries and 6 paths using 604 bytes of memory 5 BGP path attribute entries using 260 bytes of memory 1 BGP AS-PATH entries using 24 bytes of memory 2 BGP community entries using 48 bytes of memory 2 BGP route-map cache entries using 32 bytes of memory 0 BGP filter-list cache entries using 0 bytes of memory BGP activity 8/28 prefixes, 12/0 paths, scan interval 15 secs Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd 10.0.33.35 4 35 624 624 5 0 0 10:13:46 3The table below describes the significant fields shown in the display.
Table 19 show ip bgp ipv4 multicast summary Field Descriptions Field
Description
Neighbor
IP address of configured neighbor in the multicast routing table.
V
Version of multiprotocol BGP used.
AS
Autonomous system to which the neighbor belongs.
MsgRcvd
Number of messages received from the neighbor.
MsgSent
Number of messages sent to the neighbor.
TblVer
Number of the table version, which is incremented each time the table changes.
InQ
Number of messages received in the input queue.
OutQ
Number of messages ready to go in the output queue.
Up/Down
Days and hours that the neighbor has been up or down (no information in the State column means the connection is up).
State/PfxRcd
State of the neighbor/number of routes received. If no state is indicated, the state is up.
show ip bgp ipv6 multicast
To display multicast entries in the IPv6 BGP routing table, use the show ip bgp ipv6 multicast command in user EXEC or privileged EXEC mode.
Syntax Description
show ip bgp ipv6 unicast
To display entries in the Internet Protocol version 6 (IPv6) Border Gateway Protocol (BGP) routing table, use the show ip bgp ipv6 unicast command in user EXEC or privileged EXEC mode.
Syntax Description
Command History
Release
Modification
Cisco IOS XE Release 3.5S
This command was modified. The command displays the RPKI validation state, if present, as part of the path description.
15.2(1)S
This command was modified. The command displays the RPKI validation state, if present, as part of the path description.
Cisco IOS XE Release 3.7S
This command was modified. It displays information about imported paths from a VRF, if any.
15.2(4)S
This command was implemented on the Cisco 7200 series routers.
Usage Guidelines
The show ip bgp ipv6 unicast command provides output similar to the show ip bgp command, except that it is IPv6 specific.
Examples
The following is sample output from the show bgp ipv6 unicast prefix/length command, showing the RPKI state of the path:
Router# show bgp ipv6 unicast 2010::1/128 BGP routing table entry for 2010::1/128, version 5 Paths: (1 available, best #1, table default) Advertised to update-groups: 1 2 Refresh Epoch 1 3 2002::1 (FE80::A8BB:CCFF:FE00:300) from 2002::1 (10.0.0.3) Origin IGP, metric 0, localpref 100, valid, external, best path 079ECBD0 RPKI State not foundThe table below describes the significant fields shown in the display.
Table 20 show ip bgp ipv6 Field Descriptions Field
Description
BGP routing table entry for
IPv6 prefix and prefix length, internal version number of the table. This number is incremented whenever the table changes.
Paths:
Number of routes available to destination.
Advertised to update-groups:
Update group numbers.
3
Autonomous system number.
2002::1 (FE80::A8BB:CCFF:FE00:300) from 2002::1 (10.0.0.3)
Address of the neighbor from which the path was received, link local address of the neighbor, from address of the neighbor, BGP router ID of the neighbor.
Origin
Indicates the origin of the entry.
metric
If shown, the value of the interautonomous system metric.
localpref
Local preference value as set with the set local-preference route-map configuration command. The default value is 100.
valid
Path is legitimate.
external
Path is an External Border Gateway Protocol (EBGP) path.
best path
Path is flagged as the best path; number indicates which path in memory.
RPKI State
RPKI state of the network prefix shown at the beginning of the output. The state could be valid, invalid, or not found.
show ip bgp l2vpn
To display Layer 2 Virtual Private Network (L2VPN) address family information from the Border Gateway Protocol (BGP) table, use the show ip bgp l2vpn command in user EXEC or privileged EXEC mode.
With BGP show Command Argument
show ip bgp l2vpn vpls { all | [ summary | [ slow ] | ve-id id-value ] | { block-offset | [ value ] } | rd { route-distinguisher | [ ve-id | { block-offset | [ value ] } ] } } [ bgp-keyword ]
With IP Prefix and Mask Length Syntax
show ip bgp l2vpn vpls { all | rd route-distinguisher } [ ip-prefix/length [ [bestpath] ] [ longer-prefixes [ [injected] ] ] [ [multipaths] ] [ shorter-prefixes [ [mask-length] ] ] [ [subnets] ] ]
With Network Address Syntax
show ip bgp l2vpn vpls { all | rd route-distinguisher } [ network-address [ mask | bestpath | multipaths ] [bestpath] [ longer-prefixes [injected] ] [multipaths] [ shorter-prefixes [mask-length] ] [subnets] ]
Syntax Description
vpls
Displays L2VPN address family database information for the Virtual Private LAN Service (VPLS) subsequent address family identifier (SAFI).
all
Displays the complete L2VPN database.
rd route-distinguisher
Displays prefixes that match the specified route distinguisher.
ve-id id-value
(Optional) Displays the target VPLS Endpoint (VE) ID and ID value.
summary
(Optional) Displays a summary of BGP neighbor status.
slow
(Optional) Displays a summary of slow-peer status.
block-offset value
Displays the target block-offset value.
bgp-keyword
(Optional) Argument representing a show ip bgp command keyword that can be added to this command. See the table below.
ip-prefix/length
(Optional) The IP prefix address (in dotted decimal format) and the length of the mask (0 to 32). The slash mark must be included.
bestpath
(Optional) Displays the best path for the specified prefix.
longer-prefixes
(Optional) Displays the route and more specific routes.
injected
(Optional) Displays more specific routes that were injected because of the specified prefix.
multipaths
(Optional) Displays the multipaths for the specified prefix.
shorter-prefixes
(Optional) Displays the less specific routes.
mask-length
(Optional) The length of the mask as a number in the range from 0 to 32. Prefixes longer than the specified mask length are displayed.
subnets
(Optional) Displays the subnet routes for the specified prefix.
network-address
(Optional) The IP address of a network in the BGP routing table.
mask
(Optional) The mask of the network address, in dotted decimal format.
Command Default
If no arguments or keywords are specified, this command displays the complete L2VPN database.
Usage Guidelines
The table below displays optional show ip bgp command keywords that can be configured with the show ip bgp l2vpn command. Replace the bgp-keyword argument with the appropriate keyword from the table. For more details about each command in its show ip bgp bgp-keyword form, see the Cisco IOS IP Command Reference, Volume 2 of 3: Routing Protocols, Release 12.2.
Table 21 Optional show ip bgp Command Keywords and Descriptions Keyword
Description
community
Displays routes that match a specified community.
community-list
Displays routes that match a specified community list.
dampening
Displays paths suppressed because of dampening (BGP route from peer is up and down).
extcommunity-list
Displays routes that match a specified extcommunity list.
filter-list
Displays routes that conform to the filter list.
inconsistent-as
Displays only routes that have inconsistent autonomous systems of origin.
neighbors
Displays details about TCP and BGP neighbor connections.
oer-paths
Displays all OER-managed path information.
paths [regexp]
Displays autonomous system path information. If the optional regexp argument is entered, the autonomous system paths that are displayed match the autonomous system path regular expression.
peer-group
Displays information about peer groups.
pending-prefixes
Displays prefixes that are pending deletion.
prefix-list
Displays routes that match a specified prefix list.
quote-regexp
Displays routes that match the quoted autonomous system path regular expression.
regexp
Displays routes that match the autonomous system path regular expression.
replication
Displays the replication status update groups.
route-map
Displays routes that match the specified route map.
rt-filter-list
Displays the specified inbound route target filter list.
summary
Displays a summary of BGP neighbor status.
update-group
Displays information on update groups.
Examples
The following example shows output for the show ip bgp l2vpn command when the vpls and all keywords are used to display the complete L2VPN database:
Device# show ip bgp l2vpn vpls all BGP table version is 5, local router ID is 192.168.3.1 Status codes: s suppressed, d damped, h history, * valid, > best, i - internal, r RIB-failure, S Stale Origin codes: i - IGP, e - EGP, ? - incomplete Network Next Hop Metric LocPrf Weight Path Route Distinguisher: 45000:100 *> 45000:100:172.17.1.1/96 0.0.0.0 32768 ? *>i45000:100:172.18.2.2/96 172.16.1.2 0 100 0 ? Route Distinguisher: 45000:200 *> 45000:200:172.17.1.1/96 0.0.0.0 32768 ? *>i45000:200:172.18.2.2/96 172.16.1.2 0 100 0 ?The table below describes the significant fields shown in the display.
The following example shows output for the show ip bgp l2vpn command when the vpls and all keywords are used to display information about all VPLS BGP signaling prefixes (including local generated and received from remote):
Device#show ip bgp l2vpn vpls all BGP table version is 14743, local router ID is 1.1.1.1 Status codes: s suppressed, d damped, h history, * valid, > best, i - internal, r RIB-failure, S Stale, m multipath, b backup-path, f RT-Filter, x best-external, a additional-path, c RIB-compressed, Origin codes: i - IGP, e - EGP, ? - incomplete RPKI validation codes: V valid, I invalid, N Not found Network Next Hop Metric LocPrf Weight Path Route Distinguisher: 65000:1 *>i 65000:1:VEID-3:Blk-1/136 3.3.3.3 0 100 0 ? *> 65000:1:VEID-4:Blk-1/136 0.0.0.0 32768 ? *>i 65000:1:VEID-5:Blk-1/136 2.2.2.2 0 100 0 ? *>i 65000:1:VEID-6:Blk-1/136 4.4.4.4 0 100 0 ? Route Distinguisher: 65000:2 *> 65000:2:VEID-20:Blk-20/136 0.0.0.0 32768 ? *>i 65000:2:VEID-21:Blk-20/136 2.2.2.2 0 100 0 ? *>i 65000:2:VEID-22:Blk-20/136 3.3.3.3 0 100 0 ? *>i 65000:2:VEID-23:Blk-20/136 4.4.4.4 0 100 0 ?The following example shows output for the show ip bgp l2vpn command when the vpls, all and summary keywords are used to display information about the L2VPN VPLS address family:
Device# show ip bgp l2vpn vpls all summary BGP router identifier 10.1.1.1, local AS number 65000 BGP table version is 14743, main routing table version 14743 6552 network entries using 1677312 bytes of memory 6552 path entries using 838656 bytes of memory 3276/3276 BGP path/bestpath attribute entries using 760032 bytes of memory 1638 BGP extended community entries using 65520 bytes of memory 0 BGP route-map cache entries using 0 bytes of memory 0 BGP filter-list cache entries using 0 bytes of memory BGP using 3341520 total bytes of memory BGP activity 9828/3276 prefixes, 9828/3276 paths, scan interval 60 secs Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd 10.2.2.2 4 65000 90518 90507 14743 0 0 8w0d 1638 10.3.3.3 4 65000 4901 4895 14743 0 0 2d01h 1638 10.4.4.4 4 65000 4903 4895 14743 0 0 2d01h 1638The following example shows output for the show ip bgp l2vpn command when the vpls and rd rd keywords are used to display information about all VPLS BGP signaling prefixes with the specified rd, i.e. the same VPLS instance:
Device# show ip bgp l2vpn vpls rd 65000:3 BGP table version is 14743, local router ID is 1.1.1.1 Status codes: s suppressed, d damped, h history, * valid, > best, i - internal, r RIB-failure, S Stale, m multipath, b backup-path, f RT-Filter, x best-external, a additional-path, c RIB-compressed, Origin codes: i - IGP, e - EGP, ? - incomplete RPKI validation codes: V valid, I invalid, N Not found Network Next Hop Metric LocPrf Weight Path Route Distinguisher: 65000:3 *> 65000:3:VEID-30:Blk-30/136 0.0.0.0 32768 ? *>i 65000:3:VEID-31:Blk-30/136 2.2.2.2 0 100 0 ? *>i 65000:3:VEID-32:Blk-30/136 3.3.3.3 0 100 0 ? *>i 65000:3:VEID-33:Blk-30/136 4.4.4.4 0 100 0 ?The following example shows output for the show ip bgp l2vpn command when the vpls and rd keywords are used to display the L2VPN information that matches the route distinguisher 45000:100. Note that the information displayed is a subset of the information displayed using the all keyword.
Device# show ip bgp l2vpn vpls rd 45000:100 BGP table version is 5, local router ID is 192.168.3.1 Status codes: s suppressed, d damped, h history, * valid, > best, i - internal, r RIB-failure, S Stale Origin codes: i - IGP, e - EGP, ? - incomplete Network Next Hop Metric LocPrf Weight Path Route Distinguisher: 45000:100 *> 45000:100:172.17.1.1/96 0.0.0.0 32768 ? *>i45000:100:172.18.2.2/96 172.16.1.2 0 100 0 ?The following example shows output for the show ip bgp l2vpn command when the vpls and all keywords are used to display information about an individual prefix:
Device# show ip bgp l2vpn vpls all ve-id 31 block 30 BGP routing table entry for 65000:3:VEID-31:Blk-30/136, version 11 Paths: (1 available, best #1, table L2VPN-VPLS-BGP-Table) Not advertised to any peer Refresh Epoch 2 Local 2.2.2.2 (metric 2) from 2.2.2.2 (2.2.2.2) Origin incomplete, metric 0, localpref 100, valid, internal, best AGI version(0), VE Block Size(10) Label Base(16596) Extended Community: RT:65000:3 L2VPN L2:0x0:MTU-1500 rx pathid: 0, tx pathid: 0x0 0 100 0 ?show ip bgp neighbors
To display information about Border Gateway Protocol (BGP) and TCP connections to neighbors, use the show ip bgp neighbors command in user or privileged EXEC mode.
show ip bgp [ ipv4 { multicast | unicast } | vpnv4 all | vpnv6 unicast all ] neighbors [ slow | ip-address | ipv6-address [ advertised-routes | dampened-routes | flap-statistics | paths [reg-exp] | policy [detail] | received prefix-filter | received-routes | routes ] ]
Syntax Description
ipv4
(Optional) Displays peers in the IPv4 address family.
multicast
(Optional) Specifies IPv4 multicast address prefixes.
unicast
(Optional) Specifies IPv4 unicast address prefixes.
vpnv4 all
(Optional) Displays peers in the VPNv4 address family.
vpnv6 unicast all
(Optional) Displays peers in the VPNv6 address family.
slow
(Optional) Displays information about dynamically configured slow peers.
ip-address
(Optional) IP address of the IPv4 neighbor. If this argument is omitted, information about all neighbors is displayed.
ipv6-address
(Optional) IP address of the IPv6 neighbor.
advertised-routes
(Optional) Displays all routes that have been advertised to neighbors.
dampened-routes
(Optional) Displays the dampened routes received from the specified neighbor.
flap-statistics
(Optional) Displays the flap statistics of the routes learned from the specified neighbor (for external BGP peers only).
paths reg-exp
(Optional) Displays autonomous system paths learned from the specified neighbor. An optional regular expression can be used to filter the output.
policy
(Optional) Displays the policies applied to this neighbor per address family.
detail
(Optional) Displays detailed policy information such as route maps, prefix lists, community lists, access control lists (ACLs), and autonomous system path filter lists.
received prefix-filter
(Optional) Displays the prefix list (outbound route filter [ORF]) sent from the specified neighbor.
received-routes
(Optional) Displays all received routes (both accepted and rejected) from the specified neighbor.
routes
(Optional) Displays all routes that are received and accepted. The output displayed when this keyword is entered is a subset of the output displayed by the received-routes keyword.
Command History
Mainline and T Release
Modification
10.0
This command was introduced.
11.2
This command was modified. The received-routes keyword was added.
12.2(4)T
This command was modified. The received and prefix-filter keywords were added.
12.2(15)T
This command was modified. Support for the display of BGP graceful restart capability information was added.
12.3(7)T
This command was modified. The command output was modified to support the BGP TTL Security Check feature and to display explicit-null label information.
12.4(4)T
This command was modified. Support for the display of Bidirectional Forwarding Detection (BFD) information was added.
12.4(11)T
This command was modified. Support for the policy and detail keywords was added.
12.4(20)T
This command was modified. The output was modified to support BGP TCP path MTU discovery.
12.4(24)T
This command was modified. Support for displaying 4-byte autonomous system numbers in asdot notation was added.
Command History
S Release
Modification
12.0(18)S
This command was modifed. The output was modified to display the no-prepend configuration option.
12.0(21)ST
This command was modifed. The output was modified to display Multiprotocol Label Switching (MPLS) label information.
12.0(22)S
This command was modified. Support for the display of BGP graceful restart capability information was added. Support for the Cisco 12000 series routers (Engine 0 and Engine 2) was also added.
12.0(25)S
This command was modified. The policy and detail keywords were added.
12.0(27)S
This command was modified. The command output was modified to support the BGP TTL Security Check feature and to display explicit-null label information.
12.0(31)S
This command was modified. Support for the display of BFD information was added.
12.0(32)S12
This command was modified. Support for displaying 4-byte autonomous system numbers in asdot notation was added.
12.0(32)SY8
This command was modified. Support for displaying 4-byte autonomous system numbers in asplain and asdot notation was added.
12.0(33)S3
This command was modified. Support for displaying 4-byte autonomous system numbers in asplain notation was added and the default display format became asplain.
12.2(14)S
This command was integrated into Cisco IOS Release 12.2(14)S.
12.2(17b)SXA
This command was integrated into Cisco IOS Release 12.2(17b)SXA.
12.2(18)SXE
This command was modified. Support for the display of BFD information was added.
12.2(28)SB
This command was integrated into Cisco IOS Release 12.2(28)SB.
12.2(33)SRA
This command was modified. The output was modified to support BGP TCP path Maximum Transmission Unit (MTU) discovery.
12.2(33)SRB
This command was modified. Support for the policy and detail keywords was added.
12.2(33)SXH
This command was modified. Support for displaying BGP dynamic neighbor information was added.
12.2(33)SRC
This command was modified. Support for displaying BGP graceful restart information was added.
12.2(33)SB
This command was modified. Support for displaying BFD and the BGP graceful restart per peer information was added, and support for the policy and detail keywords was integrated into Cisco IOS Release 12.2(33)SB.
12.2(33)SXI1
This command was modified. Support for displaying 4-byte autonomous system numbers in asplain and asdot notation was added.
12.2(33)SRE
This command was modified. Support for displaying BGP best external and BGP additional path features information was added. Support for displaying 4-byte autonomous system numbers in asplain and asdot notation was added.
12.2(33)XNE
This command was modified. Support for 4-byte autonomous system numbers in asplain and asdot notation was added.
15.0(1)S
This command was modified. The slow keyword was added.
15.0(1)SY
This command was integrated into Cisco IOS Release 15.0(1)SY.
15.1(1)S
This command was modified. The Layer 2 VPN address family is displayed if graceful restart or nonstop forwarding (NSF) is enabled.
15.1(1)SG
This command was modified. Support for displaying 4-byte autonomous system numbers in asplain notation was added and the default display format became asplain.
15.2(4)S
This command was modified and implemented on the Cisco 7200 series router. The configured discard and treat-as-withdraw attributes are displayed, along with counts of incoming Updates with a matching discard attribute or treat-as-withdraw attribute, and number of times a malformed Update is treat-as-withdraw. The capabilities of the neighbor to send and receive additional paths that are advertised or received are added.
15.1(2)SNG
This command was implemented on the Cisco ASR 901 Series Aggregation Services Routers.
15.2(1)E
This command was integrated into Cisco IOS Release 15.2(1)E.
Command History
Cisco IOS XE
Modification
Cisco IOS XE Release 2.1
This command was integrated into Cisco IOS XE Release 2.1.
Cisco IOS XE Release 2.4
This command was modified. Support for displaying 4-byte autonomous system numbers in asplain notation was added and the default display format became asplain.
Cisco IOS XE Release 3.1S
This command was modified. The slow keyword was added.
Cisco IOS XE Release 3.6S
This command was modified. Support for displaying BGP BFD multihop and C-bit information was added.
Cisco IOS XE Release 3.3SG
This command was modified. Support for displaying 4-byte autonomous system numbers in asplain notation was added and the default display format became asplain.
Cisco IOS XE Release 3.7S
This command was implemented on the Cisco ASR 903 router and the output modified. The configured discard and treat-as-withdraw attributes are displayed, along with counts of incoming Updates with a matching discard attribute or treat-as-withdraw attribute, and number of times a malformed Update is treat-as-withdraw. The capabilities of the neighbor to send and receive additional paths that are advertised or received are added.
Cisco IOS XE Release 3.8S
This command was modified. In support of the BGP Multi-Cluster ID feature, the cluster ID of a neighbor is displayed if the neighbor is assigned a cluster.
Usage Guidelines
Use the show ip bgp neighbors command to display BGP and TCP connection information for neighbor sessions. For BGP, this includes detailed neighbor attribute, capability, path, and prefix information. For TCP, this includes statistics related to BGP neighbor session establishment and maintenance.
Prefix activity is displayed based on the number of prefixes that are advertised and withdrawn. Policy denials display the number of routes that were advertised but then ignored based on the function or attribute that is displayed in the output.
In Cisco IOS Release 12.0(32)SY8, 12.0(33)S3, 12.2(33)SRE, 12.2(33)XNE, 12.2(33)SXI1, Cisco IOS XE Release 2.4, and later releases, the Cisco implementation of 4-byte autonomous system numbers uses asplain—65538, for example—as the default regular expression match and output display format for autonomous system numbers, but you can configure 4-byte autonomous system numbers in both the asplain format and the asdot format as described in RFC 5396. To change the default regular expression match and output display of 4-byte autonomous system numbers to asdot format, use the bgp asnotation dot command followed by the clear ip bgp * command to perform a hard reset of all current BGP sessions.
In Cisco IOS Release 12.0(32)S12, 12.4(24)T, and Cisco IOS XE Release 2.3, the Cisco implementation of 4-byte autonomous system numbers uses asdot—1.2 for example—as the only configuration format, regular expression match, and output display, with no asplain support.
Cisco IOS Releases 12.0(25)S, 12.4(11)T, 12.2(33)SRB, 12.2(33)SB, and Later Releases
When BGP neighbors use multiple levels of peer templates, determining which policies are applied to the neighbor can be difficult.
In Cisco IOS Release 12.0(25)S, 12.4(11)T, 12.2(33)SRB, 12.2(33)SB, and later releases, the policy and detail keywords were added to display the inherited policies and the policies configured directly on the specified neighbor. Inherited policies are policies that the neighbor inherits from a peer group or a peer policy template.
Examples
Example output is different for the various keywords available for the show ip bgp neighbors command. Examples using the various keywords appear in the following sections.
Examples
The following example shows output for the BGP neighbor at 10.108.50.2. This neighbor is an internal BGP (iBGP) peer. This neighbor supports the route refresh and graceful restart capabilities.
Device# show ip bgp neighbors 10.108.50.2 BGP neighbor is 10.108.50.2, remote AS 1, internal link BGP version 4, remote router ID 192.168.252.252 BGP state = Established, up for 00:24:25 Last read 00:00:24, last write 00:00:24, hold time is 180, keepalive interval is 60 seconds Neighbor capabilities: Route refresh: advertised and received(old & new) MPLS Label capability: advertised and received Graceful Restart Capability: advertised Address family IPv4 Unicast: advertised and received Message statistics: InQ depth is 0 OutQ depth is 0 Sent Rcvd Opens: 3 3 Notifications: 0 0 Updates: 0 0 Keepalives: 113 112 Route Refresh: 0 0 Total: 116 115 Default minimum time between advertisement runs is 5 seconds For address family: IPv4 Unicast BGP additional-paths computation is enabled BGP advertise-best-external is enabled BGP table version 1, neighbor version 1/0 Output queue size : 0 Index 1, Offset 0, Mask 0x2 1 update-group member Sent Rcvd Prefix activity: ---- ---- Prefixes Current: 0 0 Prefixes Total: 0 0 Implicit Withdraw: 0 0 Explicit Withdraw: 0 0 Used as bestpath: n/a 0 Used as multipath: n/a 0 Outbound Inbound Local Policy Denied Prefixes: -------- ------- Total: 0 0 Number of NLRIs in the update sent: max 0, min 0 Connections established 3; dropped 2 Last reset 00:24:26, due to Peer closed the session External BGP neighbor may be up to 2 hops away. Connection state is ESTAB, I/O status: 1, unread input bytes: 0 Connection is ECN Disabled Local host: 10.108.50.1, Local port: 179 Foreign host: 10.108.50.2, Foreign port: 42698 Enqueued packets for retransmit: 0, input: 0 mis-ordered: 0 (0 bytes) Event Timers (current time is 0x68B944): Timer Starts Wakeups Next Retrans 27 0 0x0 TimeWait 0 0 0x0 AckHold 27 18 0x0 SendWnd 0 0 0x0 KeepAlive 0 0 0x0 GiveUp 0 0 0x0 PmtuAger 0 0 0x0 DeadWait 0 0 0x0 iss: 3915509457 snduna: 3915510016 sndnxt: 3915510016 sndwnd: 15826 irs: 233567076 rcvnxt: 233567616 rcvwnd: 15845 delrcvwnd: 539 SRTT: 292 ms, RTTO: 359 ms, RTV: 67 ms, KRTT: 0 ms minRTT: 12 ms, maxRTT: 300 ms, ACK hold: 200 ms Flags: passive open, nagle, gen tcbs IP Precedence value : 6 Datagrams (max data segment is 1460 bytes): Rcvd: 38 (out of order: 0), with data: 27, total data bytes: 539 Sent: 45 (retransmit: 0, fastretransmit: 0, partialack: 0, Second Congestion: 08The table below describes the significant fields shown in the display. Fields that are preceded by the asterisk character (*) are displayed only when the counter has a nonzero value.
Table 23 show ip bgp neighbors Field Descriptions Field
Description
BGP neighbor
IP address of the BGP neighbor and its autonomous system number.
remote AS
Autonomous system number of the neighbor.
local AS 300 no-prepend (not shown in display)
Verifies that the local autonomous system number is not prepended to received external routes. This output supports the hiding of the local autonomous systems when a network administrator is migrating autonomous systems.
internal link
“internal link” is displayed for iBGP neighbors; “external link” is displayed for external BGP (eBGP) neighbors.
BGP version
BGP version being used to communicate with the remote router.
remote router ID
IP address of the neighbor.
BGP state
Finite state machine (FSM) stage of session negotiation.
up for
Time, in hh:mm:ss, that the underlying TCP connection has been in existence.
Last read
Time, in hh:mm:ss, since BGP last received a message from this neighbor.
last write
Time, in hh:mm:ss, since BGP last sent a message to this neighbor.
hold time
Time, in seconds, that BGP will maintain the session with this neighbor without receiving messages.
keepalive interval
Time interval, in seconds, at which keepalive messages are transmitted to this neighbor.
Neighbor capabilities
BGP capabilities advertised and received from this neighbor. “advertised and received” is displayed when a capability is successfully exchanged between two routers.
Route refresh
Status of the route refresh capability.
MPLS Label capability
Indicates that MPLS labels are both sent and received by the eBGP peer.
Graceful Restart Capability
Status of the graceful restart capability.
Address family IPv4 Unicast
IP Version 4 unicast-specific properties of this neighbor.
Message statistics
Statistics organized by message type.
InQ depth is
Number of messages in the input queue.
OutQ depth is
Number of messages in the output queue.
Sent
Total number of transmitted messages.
Revd
Total number of received messages.
Opens
Number of open messages sent and received.
Notifications
Number of notification (error) messages sent and received.
Updates
Number of update messages sent and received.
Keepalives
Number of keepalive messages sent and received.
Route Refresh
Number of route refresh request messages sent and received.
Total
Total number of messages sent and received.
Default minimum time between...
Time, in seconds, between advertisement transmissions.
For address family:
Address family to which the following fields refer.
BGP table version
Internal version number of the table. This is the primary routing table with which the neighbor has been updated. The number increments when the table changes.
neighbor version
Number used by the software to track prefixes that have been sent and those that need to be sent.
1 update-group member
Number of the update-group member for this address family.
Prefix activity
Prefix statistics for this address family.
Prefixes Current
Number of prefixes accepted for this address family.
Prefixes Total
Total number of received prefixes.
Implicit Withdraw
Number of times that a prefix has been withdrawn and readvertised.
Explicit Withdraw
Number of times that a prefix has been withdrawn because it is no longer feasible.
Used as bestpath
Number of received prefixes installed as best paths.
Used as multipath
Number of received prefixes installed as multipaths.
* Saved (soft-reconfig)
Number of soft resets performed with a neighbor that supports soft reconfiguration. This field is displayed only if the counter has a nonzero value.
* History paths
This field is displayed only if the counter has a nonzero value.
* Invalid paths
Number of invalid paths. This field is displayed only if the counter has a nonzero value.
Local Policy Denied Prefixes
Prefixes denied due to local policy configuration. Counters are updated for inbound and outbound policy denials. The fields under this heading are displayed only if the counter has a nonzero value.
* route-map
Displays inbound and outbound route-map policy denials.
* filter-list
Displays inbound and outbound filter-list policy denials.
* prefix-list
Displays inbound and outbound prefix-list policy denials.
* Ext Community
Displays only outbound extended community policy denials.
* AS_PATH too long
Displays outbound AS_PATH length policy denials.
* AS_PATH loop
Displays outbound AS_PATH loop policy denials.
* AS_PATH confed info
Displays outbound confederation policy denials.
* AS_PATH contains AS 0
Displays outbound denials of autonomous system 0.
* NEXT_HOP Martian
Displays outbound martian denials.
* NEXT_HOP non-local
Displays outbound nonlocal next-hop denials.
* NEXT_HOP is us
Displays outbound next-hop-self denials.
* CLUSTER_LIST loop
Displays outbound cluster-list loop denials.
* ORIGINATOR loop
Displays outbound denials of local originated routes.
* unsuppress-map
Displays inbound denials due to an unsuppress map.
* advertise-map
Displays inbound denials due to an advertise map.
* VPN Imported prefix
Displays inbound denials of VPN prefixes.
* Well-known Community
Displays inbound denials of well-known communities.
* SOO loop
Displays inbound denials due to site-of-origin.
* Bestpath from this peer
Displays inbound denials because the best path came from the local router.
* Suppressed due to dampening
Displays inbound denials because the neighbor or link is in a dampening state.
* Bestpath from iBGP peer
Deploys inbound denials because the best path came from an iBGP neighbor.
* Incorrect RIB for CE
Deploys inbound denials due to RIB errors for a customer edge (CE) router.
* BGP distribute-list
Displays inbound denials due to a distribute list.
Number of NLRIs...
Number of network layer reachability attributes in updates.
Connections established
Number of times a TCP and BGP connection has been successfully established.
dropped
Number of times that a valid session has failed or been taken down.
Last reset
Time, in hh:mm:ss, since this peering session was last reset. The reason for the reset is displayed on this line.
External BGP neighbor may be...
Indicates that the BGP time to live (TTL) security check is enabled. The maximum number of hops that can separate the local and remote peer is displayed on this line.
Connection state
Connection status of the BGP peer.
unread input bytes
Number of bytes of packets still to be processed.
Connection is ECN Disabled
Explicit congestion notification status (enabled or disabled).
Local host: 10.108.50.1, Local port: 179
IP address of the local BGP speaker. BGP port number 179.
Foreign host: 10.108.50.2, Foreign port: 42698
Neighbor address and BGP destination port number.
Enqueued packets for retransmit:
Packets queued for retransmission by TCP.
Event Timers
TCP event timers. Counters are provided for starts and wakeups (expired timers).
Retrans
Number of times a packet has been retransmitted.
TimeWait
Time waiting for the retransmission timers to expire.
AckHold
Acknowledgment hold timer.
SendWnd
Transmission (send) window.
KeepAlive
Number of keepalive packets.
GiveUp
Number of times a packet is dropped due to no acknowledgment.
PmtuAger
Path MTU discovery timer.
DeadWait
Expiration timer for dead segments.
iss:
Initial packet transmission sequence number.
snduna:
Last transmission sequence number that has not been acknowledged.
sndnxt:
Next packet sequence number to be transmitted.
sndwnd:
TCP window size of the remote neighbor.
irs:
Initial packet receive sequence number.
rcvnxt:
Last receive sequence number that has been locally acknowledged.
rcvwnd:
TCP window size of the local host.
delrcvwnd:
Delayed receive window—data the local host has read from the connection, but has not yet subtracted from the receive window the host has advertised to the remote host. The value in this field gradually increases until it is higher than a full-sized packet, at which point it is applied to the rcvwnd field.
SRTT:
A calculated smoothed round-trip timeout.
RTTO:
Round-trip timeout.
RTV:
Variance of the round-trip time.
KRTT:
New round-trip timeout (using the Karn algorithm). This field separately tracks the round-trip time of packets that have been re-sent.
minRTT:
Shortest recorded round-trip timeout (hard-wire value used for calculation).
maxRTT:
Longest recorded round-trip timeout.
ACK hold:
Length of time the local host will delay an acknowledgment to carry (piggyback) additional data.
IP Precedence value:
IP precedence of the BGP packets.
Datagrams
Number of update packets received from a neighbor.
Rcvd:
Number of received packets.
out of order:
Number of packets received out of sequence.
with data
Number of update packets sent with data.
total data bytes
Total amount of data received, in bytes.
Sent
Number of update packets sent.
Second Congestion
Number of update packets with data sent.
Datagrams: Rcvd
Number of update packets received from a neighbor.
retransmit
Number of packets retransmitted.
fastretransmit
Number of duplicate acknowledgments retransmitted for an out of order segment before the retransmission timer expires.
partialack
Number of retransmissions for partial acknowledgments (transmissions before or without subsequent acknowledgments).
Second Congestion
Number of second retransmissions sent due to congestion.
Examples
The following partial example shows output for several external BGP neighbors in autonomous systems with 4-byte autonomous system numbers, 65536 and 65550. This example requires Cisco IOS Release 12.0(32)SY8, 12.0(33)S3, 12.2(33)SRE, 12.2(33)XNE, 12.2(33)SXI1, Cisco IOS XE Release 2.4, or a later release.
Router# show ip bgp neighbors BGP neighbor is 192.168.1.2, remote AS 65536, external link BGP version 4, remote router ID 0.0.0.0 BGP state = Idle Last read 02:03:38, last write 02:03:38, hold time is 120, keepalive interval is 70 seconds Configured hold time is 120, keepalive interval is 70 seconds Minimum holdtime from neighbor is 0 seconds . . . BGP neighbor is 192.168.3.2, remote AS 65550, external link Description: finance BGP version 4, remote router ID 0.0.0.0 BGP state = Idle Last read 02:03:48, last write 02:03:48, hold time is 120, keepalive interval is 70 seconds Configured hold time is 120, keepalive interval is 70 seconds Minimum holdtime from neighbor is 0 secondsExamples
The following example displays routes advertised for only the 172.16.232.178 neighbor:
Device# show ip bgp neighbors 172.16.232.178 advertised-routes BGP table version is 27, local router ID is 172.16.232.181 Status codes: s suppressed, d damped, h history, * valid, > best, i - internal Origin codes: i - IGP, e - EGP, ? - incomplete Network Next Hop Metric LocPrf Weight Path *>i10.0.0.0 172.16.232.179 0 100 0 ? *> 10.20.2.0 10.0.0.0 0 32768 iThe table below describes the significant fields shown in the display.
Examples
The following is sample output from the show ip bgp neighbors command entered with the check-control-plane-failure option configured:
Device# show ip bgp neighbors 10.10.10.1 BGP neighbor is 10.10.10.1, remote AS 10, internal link Fall over configured for session BFD is configured. BFD peer is Up. Using BFD to detect fast fallover (single-hop) with c-bit check-control-plane-failure. Inherits from template cbit-tps for session parameters BGP version 4, remote router ID 10.7.7.7 BGP state = Established, up for 00:03:55 Last read 00:00:02, last write 00:00:21, hold time is 180, keepalive interval is 60 seconds Neighbor sessions: 1 active, is not multisession capable (disabled) Neighbor capabilities: Route refresh: advertised and received(new) Four-octets ASN Capability: advertised and received Address family IPv4 Unicast: advertised and received Enhanced Refresh Capability: advertised and received Multisession Capability: Stateful switchover support enabled: NO for session 1Examples
The following is sample output from the show ip bgp neighbors command entered with the paths keyword:
Device# show ip bgp neighbors 172.29.232.178 paths 10 Address Refcount Metric Path 0x60E577B0 2 40 10 ?The table below describes the significant fields shown in the display.
Table 25 show ip bgp neighbors paths Field Descriptions Field
Description
Address
Internal address where the path is stored.
Refcount
Number of routes using that path.
Metric
Multi Exit Discriminator (MED) metric for the path. (The name of this metric for BGP versions 2 and 3 is INTER_AS.)
Path
Autonomous system path for that route, followed by the origin code for that route.
Examples
The following example shows that a prefix list that filters all routes in the 10.0.0.0 network has been received from the 192.168.20.72 neighbor:
Device# show ip bgp neighbors 192.168.20.72 received prefix-filter Address family:IPv4 Unicast ip prefix-list 192.168.20.72:1 entries seq 5 deny 10.0.0.0/8 le 32The table below describes the significant fields shown in the display.
Examples
The following sample output shows the policies applied to the neighbor at 192.168.1.2. The output displays both inherited policies and policies configured on the neighbor device. Inherited polices are policies that the neighbor inherits from a peer group or a peer-policy template.
Device# show ip bgp neighbors 192.168.1.2 policy Neighbor: 192.168.1.2, Address-Family: IPv4 Unicast Locally configured policies: route-map ROUTE in Inherited polices: prefix-list NO-MARKETING in route-map ROUTE in weight 300 maximum-prefix 10000Examples
The following is sample output from the show ip bgp neighbors command that verifies that Bidirectional Forwarding Detection (BFD) is being used to detect fast fallover for the BGP neighbor that is a BFD peer:
Device# show ip bgp neighbors BGP neighbor is 172.16.10.2, remote AS 45000, external link . . . Using BFD to detect fast falloverExamples
The following is sample output from the show ip bgp neighbors command that verifies that BGP TCP path maximum transmission unit (MTU) discovery is enabled for the BGP neighbor at 172.16.1.2:
Device# show ip bgp neighbors 172.16.1.2 BGP neighbor is 172.16.1.2, remote AS 45000, internal link BGP version 4, remote router ID 172.16.1.99 . . . For address family: IPv4 Unicast BGP table version 5, neighbor version 5/0 . . . Address tracking is enabled, the RIB does have a route to 172.16.1.2 Address tracking requires at least a /24 route to the peer Connections established 3; dropped 2 Last reset 00:00:35, due to Router ID changed Transport(tcp) path-mtu-discovery is enabled . . . SRTT: 146 ms, RTTO: 1283 ms, RTV: 1137 ms, KRTT: 0 ms minRTT: 8 ms, maxRTT: 300 ms, ACK hold: 200 ms Flags: higher precedence, retransmission timeout, nagle, path mtu capableExamples
The following is sample output from the show ip bgp neighbors command that verifies that the neighbor 192.168.3.2 is a member of the peer group group192 and belongs to the subnet range group 192.168.0.0/16, which shows that this BGP neighbor was dynamically created:
Device# show ip bgp neighbors 192.168.3.2 BGP neighbor is *192.168.3.2, remote AS 50000, external link Member of peer-group group192 for session parameters Belongs to the subnet range group: 192.168.0.0/16 BGP version 4, remote router ID 192.168.3.2 BGP state = Established, up for 00:06:35 Last read 00:00:33, last write 00:00:25, hold time is 180, keepalive intervals Neighbor capabilities: Route refresh: advertised and received(new) Address family IPv4 Unicast: advertised and received Message statistics: InQ depth is 0 OutQ depth is 0 Sent Rcvd Opens: 1 1 Notifications: 0 0 Updates: 0 0 Keepalives: 7 7 Route Refresh: 0 0 Total: 8 8 Default minimum time between advertisement runs is 30 seconds For address family: IPv4 Unicast BGP table version 1, neighbor version 1/0 Output queue size : 0 Index 1, Offset 0, Mask 0x2 1 update-group member group192 peer-group member . . .Examples
The following is partial output from the show ip bgp neighbors command that verifies the status of the BGP graceful restart capability for the external BGP peer at 192.168.3.2. Graceful restart is shown as disabled for this BGP peer.
Device# show ip bgp neighbors 192.168.3.2 BGP neighbor is 192.168.3.2, remote AS 50000, external link Inherits from template S2 for session parameters BGP version 4, remote router ID 192.168.3.2 BGP state = Established, up for 00:01:41 Last read 00:00:45, last write 00:00:45, hold time is 180, keepalive intervals Neighbor sessions: 1 active, is multisession capable Neighbor capabilities: Route refresh: advertised and received(new) Address family IPv4 Unicast: advertised and received . . . Address tracking is enabled, the RIB does have a route to 192.168.3.2 Connections established 1; dropped 0 Last reset never Transport(tcp) path-mtu-discovery is enabled Graceful-Restart is disabled Connection state is ESTAB, I/O status: 1, unread input bytes: 0Examples
The following is partial output from the show ip bgp neighbors command. For this release, the display includes the Layer 2 VFN address family information if graceful restart or NSF is enabled.
Device# show ip bgp neighbors Load for five secs: 2%/0%; one minute: 0%; five minutes: 0% Time source is hardware calendar, *21:49:17.034 GMT Wed Sep 22 2010 BGP neighbor is 10.1.1.3, remote AS 2, internal link BGP version 4, remote router ID 10.1.1.3 BGP state = Established, up for 00:14:32 Last read 00:00:30, last write 00:00:43, hold time is 180, keepalive interval is 60 seconds Neighbor sessions: 1 active, is not multisession capable (disabled) Neighbor capabilities: Route refresh: advertised and received(new) Four-octets ASN Capability: advertised and received Address family IPv4 Unicast: advertised and received Address family L2VPN Vpls: advertised and received Graceful Restart Capability: advertised and received Remote Restart timer is 120 seconds Address families advertised by peer: IPv4 Unicast (was not preserved), L2VPN Vpls (was not preserved) Multisession Capability: Message statistics: InQ depth is 0 OutQ depth is 0 Sent Rcvd Opens: 1 1 Notifications: 0 0 Updates: 4 16 Keepalives: 16 16 Route Refresh: 0 0 Total: 21 33 Default minimum time between advertisement runs is 0 seconds For address family: IPv4 Unicast Session: 10.1.1.3 BGP table version 34, neighbor version 34/0 Output queue size : 0 Index 1, Advertise bit 0 1 update-group member Slow-peer detection is disabled Slow-peer split-update-group dynamic is disabled Sent Rcvd Prefix activity: ---- ---- Prefixes Current: 2 11 (Consumes 572 bytes) Prefixes Total: 4 19 Implicit Withdraw: 2 6 Explicit Withdraw: 0 2 Used as bestpath: n/a 7 Used as multipath: n/a 0 Outbound Inbound Local Policy Denied Prefixes: -------- ------- NEXT_HOP is us: n/a 1 Bestpath from this peer: 20 n/a Bestpath from iBGP peer: 8 n/a Invalid Path: 10 n/a Total: 38 1 Number of NLRIs in the update sent: max 2, min 0 Last detected as dynamic slow peer: never Dynamic slow peer recovered: never For address family: L2VPN Vpls Session: 10.1.1.3 BGP table version 8, neighbor version 8/0 Output queue size : 0 Index 1, Advertise bit 0 1 update-group member Slow-peer detection is disabled Slow-peer split-update-group dynamic is disabled Sent Rcvd Prefix activity: ---- ---- Prefixes Current: 1 1 (Consumes 68 bytes) Prefixes Total: 2 1 Implicit Withdraw: 1 0 Explicit Withdraw: 0 0 Used as bestpath: n/a 1 Used as multipath: n/a 0 Outbound Inbound Local Policy Denied Prefixes: -------- ------- Bestpath from this peer: 4 n/a Bestpath from iBGP peer: 1 n/a Invalid Path: 2 n/a Total: 7 0 Number of NLRIs in the update sent: max 1, min 0 Last detected as dynamic slow peer: never Dynamic slow peer recovered: never Address tracking is enabled, the RIB does have a route to 10.1.1.3 Connections established 1; dropped 0 Last reset never Transport(tcp) path-mtu-discovery is enabled Graceful-Restart is enabled, restart-time 120 seconds, stalepath-time 360 seconds Connection state is ESTAB, I/O status: 1, unread input bytes: 0 Connection is ECN Disabled Mininum incoming TTL 0, Outgoing TTL 255 Local host: 10.1.1.1, Local port: 179 Foreign host: 10.1.1.3, Foreign port: 48485 Connection tableid (VRF): 0 Enqueued packets for retransmit: 0, input: 0 mis-ordered: 0 (0 bytes) Event Timers (current time is 0xE750C): Timer Starts Wakeups Next Retrans 18 0 0x0 TimeWait 0 0 0x0 AckHold 22 20 0x0 SendWnd 0 0 0x0 KeepAlive 0 0 0x0 GiveUp 0 0 0x0 PmtuAger 0 0 0x0 DeadWait 0 0 0x0 Linger 0 0 0x0 iss: 3196633674 snduna: 3196634254 sndnxt: 3196634254 sndwnd: 15805 irs: 1633793063 rcvnxt: 1633794411 rcvwnd: 15037 delrcvwnd: 1347 SRTT: 273 ms, RTTO: 490 ms, RTV: 217 ms, KRTT: 0 ms minRTT: 2 ms, maxRTT: 300 ms, ACK hold: 200 ms Status Flags: passive open, gen tcbs Option Flags: nagle, path mtu capable Datagrams (max data segment is 1436 bytes): Rcvd: 42 (out of order: 0), with data: 24, total data bytes: 1347 Sent: 40 (retransmit: 0 fastretransmit: 0),with data: 19, total data bytes: 579Examples
The following is sample output from the show ip bgp neighbors command that indicates the discard attribute values and treat-as-withdraw attribute values configured. It also provides a count of received Updates matching a treat-as-withdraw attribute, a count of received Updates matching a discard attribute, and a count of received malformed Updates that are treat-as-withdraw.
Device# show ip bgp vpnv4 all neighbors 10.0.103.1 BGP neighbor is 10.0.103.1, remote AS 100, internal link Path-attribute treat-as-withdraw inbound Path-attribute treat-as-withdraw value 128 Path-attribute treat-as-withdraw 128 in: count 2 Path-attribute discard 128 inbound Path-attribute discard 128 in: count 2 Outbound Inbound Local Policy Denied Prefixes: -------- ------- MALFORM treat as withdraw: 0 1 Total: 0 1Examples
The following output indicates that the neighbor is capable of advertising additional paths and sending additional paths it receives. It is also capable of receiving additional paths and advertised paths.
Device# show ip bgp neighbors 10.108.50.2 BGP neighbor is 10.108.50.2, remote AS 1, internal link BGP version 4, remote router ID 192.168.252.252 BGP state = Established, up for 00:24:25 Last read 00:00:24, last write 00:00:24, hold time is 180, keepalive interval is 60 seconds Neighbor capabilities: Additional paths Send: advertised and received Additional paths Receive: advertised and received Route refresh: advertised and received(old & new) Graceful Restart Capabilty: advertised and received Address family IPv4 Unicast: advertised and receivedExamples
In the following output, the cluster ID of the neighbor is displayed. (The vertical bar and letter “i” for “include” cause the device to display only lines that include the user's input after the “i”, in this case, “cluster-id.”) The cluster ID displayed is the one directly configured through a neighbor or a template.
Device# show ip bgp neighbors 192.168.2.2 | i cluster-id Configured with the cluster-id 192.168.15.6Related Commands
Command
Description
bgp asnotation dot
Changes the default display and the regular expression match format of BGP 4-byte autonomous system numbers from asplain (decimal values) to dot notation.
bgp enhanced-error
Restores the default behavior of treating Update messages that have a malformed attribute as withdrawn, or includes iBGP peers in the Enhanced Attribute Error Handling feature.
neighbor path-attribute discard
Configures the device to discard unwanted Update messages from the specified neighbor that contain a specified path attribute.
neighbor path-attribute treat-as-withdraw
Configures the device to withdraw from the specified neighbor unwanted Update messages that contain a specified attribute.
neighbor send-label
Enables a BGP router to send MPLS labels with BGP routes to a neighboring BGP router.
neighbor send-label explicit-null
Enables a BGP router to send MPLS labels with explicit-null information for a CSC-CE router and BGP routes to a neighboring CSC-PE router.
router bgp
Configures the BGP routing process.
show ip bgp path-attribute discard
To display all prefixes for which an attribute has been discarded, use the show ip bgp path-attribute discard command in user EXEC or privileged EXEC mode.
show ip bgp path-attribute unknown
To display all prefixes that have an unknown attribute, use the show ip bgp path-attribute unknown command in user EXEC or privileged EXEC mode.
show ip bgp paths
Command History
Release
Modification
10.0
This command was introduced.
12.2(31)SB
This command was integrated into Cisco IOS Release 12.2(31)SB.
12.2(33)SRA
This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2SX
This command is supported in the Cisco IOS Release 12.2SX train. Support in a specific 12.2SX release of this train depends on your feature set, platform, and platform hardware.
12.0(33)S3
This command was modified. Support for displaying 4-byte autonomous system numbers in asplain notation was added and the default display format is now asplain.
Cisco IOS XE Release 2.4
This command was modified. Support for displaying 4-byte autonomous system numbers in asplain notation was added and the default display format is now asplain.
12.2(33)SRE
This command was modified. Support for displaying 4-byte autonomous system numbers in asplain and asdot notation was added.
12.2(33)XNE
This command was modified. Support for 4-byte autonomous system numbers in asplain and asdot notation was added.
Examples
The following is sample output from the show ip bgp paths command in privileged EXEC mode:
Router# show ip bgp paths Address Hash Refcount Metric Path 0x60E5742C 0 1 0 i 0x60E3D7AC 2 1 0 ? 0x60E5C6C0 11 3 0 10 ? 0x60E577B0 35 2 40 10 ?The table below describes the significant fields shown in the display.
Table 29 show ip bgp paths Field Descriptions Field
Description
Address
Internal address where the path is stored.
Hash
Hash bucket where path is stored.
Refcount
Number of routes using that path.
Metric
The Multi Exit Discriminator (MED) metric for the path. (The name of this metric for BGP versions 2 and 3 is INTER_AS.)
Path
The autonomous system path for that route, followed by the origin code for that route.
show ip bgp peer-group
To display information about BGP peer groups, use the show ip bgp peer-group command in user EXEC or privileged EXEC mode.
Command History
Release
Modification
11.0
This command was introduced.
12.2(31)SB
This command was integrated into Cisco IOS Release 12.2(31)SB.
12.2(33)SRA
This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2(33)SXH
This command was integrated into Cisco IOS Release 12.2(33)SXH, and the output was modified to support BGP dynamic neighbors.
15.0(1)S
This command was integrated into Cisco IOS Release 15.0(1)S, with the modified output to support BGP dynamic neighbors.
Cisco IOS XE Release 3.1S
This command was integrated into Cisco IOS XE Release 3.1S, with the modified output to support BGP dynamic neighbors.
15.2.(4)S
This command was integrated into Cisco IOS Release 15.2(4)S.
Examples
The following is sample output from the show ip bgp peer-group command for a peer group named internal in privileged EXEC mode:
Router# show ip bgp peer-group internal BGP peer-group is internal, remote AS 100 BGP version 4 Minimum time between advertisement runs is 5 seconds For address family:IPv4 Unicast BGP neighbor is internal, peer-group internal, members: 10.1.1.1 10.1.1.2 Index 3, Offset 0, Mask 0x8 Incoming update AS path filter list is 53 Outgoing update AS path filter list is 54 Route map for incoming advertisements is MAP193 Route map for outgoing advertisements is MAP194 Update messages formatted 0, replicated 0The following output from the show ip bgp peer-group command shows information about a configured listen range group, group192. In Cisco IOS Release 12.2(33)SXH, 15.0(1)S, and XE Release 3.1S and later releases, the BGP dynamic neighbor feature introduced the ability to support the dynamic creation of BGP neighbor peers using a subnet range associated with a peer group (listen range group).
Router# show ip bgp peer-group group192 BGP peer-group is group192, remote AS 40000 BGP peergroup group192 listen range group members: 192.168.0.0/16 BGP version 4 Default minimum time between advertisement runs is 30 seconds For address family: IPv4 Unicast BGP neighbor is group192, peer-group external, members: *192.168.3.2 Index 0, Offset 0, Mask 0x0 Update messages formatted 0, replicated 0 Number of NLRIs in the update sent: max 0, min 0show ip bgp quote-regexp
To display routes matching the autonomous system path regular expression, use the show ip bgp quote-regexp command in privileged EXEC mode.
Syntax Description
Command History
Release
Modification
11.1
This command was introduced.
12.2(31)SB
This command was integrated into Cisco IOS Release 12.2(31)SB.
12.2(33)SRA
This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2(14)SX
This command was integrated into Cisco IOS Release 12.2(14)SX.
12.0(32)S12
This command was modified. Support for displaying 4-byte autonomous system numbers in asdot notation only was added.
12.0(32)SY8
This command was modified. Support for displaying 4-byte autonomous system numbers in asplain and asdot notation was added.
12.4(24)T
This command was modified. Support for displaying 4-byte autonomous system numbers in asdot notation only was added.
Cisco IOS XE Release 2.3
This command was modified. Support for displaying 4-byte autonomous system numbers in asdot notation only was added.
12.2(33)SXI1
This command was modified. Support for 4-byte autonomous system numbers in asplain and asdot notation was added.
12.0(33)S3
This command was modified. Support for displaying 4-byte autonomous system numbers in asplain notation was added and the default display format is now asplain.
Cisco IOS XE Release 2.4
This command was modified. Support for displaying 4-byte autonomous system numbers in asplain notation was added and the default display format is now asplain.
12.2(33)SRE
This command was modified. Support for displaying 4-byte autonomous system numbers in asplain and asdot notation was added.
12.2(33)XNE
This command was modified. Support for 4-byte autonomous system numbers in asplain and asdot notation was added.
15.1(1)SG
This command was modified. Support for displaying 4-byte autonomous system numbers in asplain and asdot notation was added.
Cisco IOS XE Release 3.3SG
This command was modified. Support for displaying 4-byte autonomous system numbers in asplain and asdot notation was added.
Usage Guidelines
In Cisco IOS Release 12.0(32)SY8, 12.0(33)S3, 12.2(33)SRE, 12.2(33)XNE, 12.2(33)SXI1, Cisco IOS XE Release 2.4, and later releases, the Cisco implementation of 4-byte autonomous system numbers uses asplain--65538 for example--as the default regular expression match and output display format for autonomous system numbers, but you can configure 4-byte autonomous system numbers in both the asplain format and the asdot format as described in RFC 5396. To change the default regular expression match and output display of 4-byte autonomous system numbers to asdot format, use the bgp asnotation dot command followed by the clear ip bgp * command to perform a hard reset of all current BGP sessions.
In Cisco IOS Release 12.0(32)S12, 12.4(24)T, and Cisco IOS XE Release 2.3, the Cisco implementation of 4-byte autonomous system numbers uses asdot--1.2 for example--as the only configuration format, regular expression match, and output display, with no asplain support.
Examples
The following is sample output from the show ip bgp quote-regexp command in EXEC mode:
Router# show ip bgp quote-regexp "^10_" | begin 10.40 *> 10.40.0.0/20 10.10.10.10 0 10 2548 1239 10643 i *> 10.40.16.0/20 10.10.10.10 0 10 2548 6172 i *> 10.40.32.0/19 10.10.10.10 0 10 2548 6172 i *> 10.41.0.0/19 10.10.10.10 0 10 2548 3356 3703 ? *> 10.42.0.0/17 10.10.10.10 0 10 2548 6172 i
NoteAlthough the columns in the above display are not labeled, see the Field Descriptions table below for detailed information.
The table below describes the significant fields shown in the display from left to right.
Table 30 show ip bgp quote-regexp Field Descriptions Field
Description
Status codes
Status of the table entry; for example, * in the above display. The status is displayed at the beginning of each line in the table. It can be one of the following values:
s—The table entry is suppressed.
d—The table entry is dampened.
h—The table entry history.
*—The table entry is valid.
>—The table entry is the best entry to use for that network.
i—The table entry was learned via an internal BGP (iBGP) session.
r—The table entry failed to install in the routing table.
S—The table entry is a stale route.
Network
IP address of a network entity; for example, 24.40.0.0/20 in the above display.
Next Hop
IP address of the next system that is used when forwarding a packet to the destination network; for example, 10.10.10.10. in the above display. An entry of 0.0.0.0 indicates that the router has some non-BGP routes to this network.
Metric
If shown, the value of the interautonomous system metric.; for example, 0 in the above display.
LocPrf
Local preference value as set with the set local-preference route-map configuration command; for example, 10 in the above display. The default value is 100.
Weight
Weight of the route as set via autonomous system filters; for example, 2548 in the above display.
Path
Autonomous system paths to the destination network; for example, 1239 in the above display. There can be one entry in this field for each autonomous system in the path.
Origin codes
Origin of the entry; for example, ? in the above display. The origin code is placed at the end of each line in the table. It can be one of the following values:
i--Entry originated from an Interior Gateway Protocol (IGP) and was advertised with a network router configuration command.
e—Entry originated from an Exterior Gateway Protocol (EGP).
?—Origin of the path is not clear. Usually, this is a router that is redistributed into BGP from an IGP.
The following output from the show ip bgp quote-regexp command shows routes that match the quoted regular expression for the 4-byte autonomous system number 65550. The 4-byte autonomous system number is displayed in the default asplain format. This example requires Cisco IOS Release 12.0(32)SY8, 12.0(33)S3, 12.(33)SRE, 12.2(33)XNE, 12.2(33)SXI1, Cisco IOS XE Release 2.4, or a later release.
Router# show ip bgp quote-regexp “^65550$” BGP table version is 4, local router ID is 172.17.1.99 Status codes: s suppressed, d damped, h history, * valid, > best, i - internal, r RIB-failure, S Stale Origin codes: i - IGP, e - EGP, ? - incomplete Network Next Hop Metric LocPrf Weight Path *> 10.2.2.0/24 192.168.3.2 0 0 65550 iRelated Commands
Command
Description
bgp asnotation dot
Changes the default display and the regular expression match format of BGP 4-byte autonomous system numbers from asplain (decimal values) to dot notation.
router bgp
Configures the BGP routing process.
show ip bgp regexp
Displays routes matching the autonomous system path regular expression.
show ip bgp regexp
To display routes matching the autonomous system path regular expression, use the show ip bgp regexp command in EXEC mode.
Syntax Description
regexp
Regular expression to match the BGP autonomous system paths.
- In Cisco IOS Release 12.0(32)SY8, 12.0(33)S3, 12.2(33)SRE, 12.2(33)XNE, 12.2(33)SXI1, Cisco IOS XE Release 2.4, and later releases, 4-byte autonomous system numbers are supported in the range from 65536 to 4294967295 in asplain notation and in the range from 1.0 to 65535.65535 in asdot notation.
- In Cisco IOS Release 12.0(32)S12, 12.4(24)T, and Cisco IOS XE Release 2.3, 4-byte autonomous system numbers are supported in the range from 1.0 to 65535.65535 in asdot notation only.
For more details about autonomous system number formats, see the router bgp command.
Command History
Release
Modification
10.0
This command was introduced.
12.2(31)SB
This command was integrated into Cisco IOS Release 12.2(31)SB.
12.2(33)SRA
This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2(14)SX
This command was integrated into Cisco IOS Release 12.2(14)SX.
12.0(32)S12
This command was modified. Support for displaying 4-byte autonomous system numbers in asdot notation only was added.
12.0(32)SY8
This command was modified. Support for displaying 4-byte autonomous system numbers in asplain and asdot notation was added.
12.4(24)T
This command was modified. Support for displaying 4-byte autonomous system numbers in asdot notation only was added.
Cisco IOS XE Release 2.3
This command was modified. Support for displaying 4-byte autonomous system numbers in asdot notation only was added.
12.2(33)SXI1
This command was modified. Support for 4-byte autonomous system numbers in asplain and asdot notation was added.
12.0(33)S3
This command was modified. Support for displaying 4-byte autonomous system numbers in asplain notation was added and the default display format is now asplain.
Cisco IOS XE Release 2.4
This command was modified. Support for displaying 4-byte autonomous system numbers in asplain notation was added and the default display format is now asplain.
12.2(33)SRE
This command was modified. Support for displaying 4-byte autonomous system numbers in asplain and asdot notation was added.
12.2(33)XNE
This command was modified. Support for 4-byte autonomous system numbers in asplain and asdot notation was added.
15.1(1)SG
This command was modified. Support for displaying 4-byte autonomous system numbers in asplain and asdot notation was added.
Cisco IOS XE Release 3.3SG
This command was modified. Support for displaying 4-byte autonomous system numbers in asplain and asdot notation was added.
Usage Guidelines
In Cisco IOS Release 12.0(32)SY8, 12.0(33)S3, 12.2(33)SRE, 12.2(33)XNE, 12.2(33)SXI1, Cisco IOS XE Release 2.4, and later releases, the Cisco implementation of 4-byte autonomous system numbers uses asplain--65538 for example--as the default regular expression match and output display format for autonomous system numbers, but you can configure 4-byte autonomous system numbers in both the asplain format and the asdot format as described in RFC 5396. To change the default regular expression match and output display of 4-byte autonomous system numbers to asdot format, use the bgp asnotation dot command followed by the clear ip bgp * command to perform a hard reset of all current BGP sessions.
In Cisco IOS Release 12.0(32)S12, 12.4(24)T, and Cisco IOS XE Release 2.3, the Cisco implementation of 4-byte autonomous system numbers uses asdot--1.2 for example--as the only configuration format, regular expression match, and output display, with no asplain support.
To ensure a smooth transition we recommend that all BGP speakers within an autonomous system that is identified using a 4-byte autonomous system number, are upgraded to support 4-byte autonomous system numbers.
Examples
The following is sample output from the show ip bgp regexp command in privileged EXEC mode:
Router# show ip bgp regexp 108$ BGP table version is 1738, local router ID is 172.16.72.24 Status codes: s suppressed, * valid, > best, i - internal Origin codes: i - IGP, e - EGP, ? - incomplete Network Next Hop Metric LocPrf Weight Path * 172.16.0.0 172.16.72.30 0 109 108 ? * 172.16.1.0 172.16.72.30 0 109 108 ? * 172.16.11.0 172.16.72.30 0 109 108 ? * 172.16.14.0 172.16.72.30 0 109 108 ? * 172.16.15.0 172.16.72.30 0 109 108 ? * 172.16.16.0 172.16.72.30 0 109 108 ? * 172.16.17.0 172.16.72.30 0 109 108 ? * 172.16.18.0 172.16.72.30 0 109 108 ? * 172.16.19.0 172.16.72.30 0 109 108 ? * 172.16.24.0 172.16.72.30 0 109 108 ? * 172.16.29.0 172.16.72.30 0 109 108 ? * 172.16.30.0 172.16.72.30 0 109 108 ? * 172.16.33.0 172.16.72.30 0 109 108 ? * 172.16.35.0 172.16.72.30 0 109 108 ? * 172.16.36.0 172.16.72.30 0 109 108 ? * 172.16.37.0 172.16.72.30 0 109 108 ? * 172.16.38.0 172.16.72.30 0 109 108 ? * 172.16.39.0 172.16.72.30 0 109 108 ?The following example requires Cisco IOS Release 12.0(32)SY8, 12.0(33)S3, 12.2(33)SRE, 12.2(33)XNE, 12.2(33)SXI1, Cisco IOS XE Release 2.4, or a later release. After the bgp asnotation dot command is configured, the regular expression match format for 4-byte autonomous system paths is changed to asdot notation format. Although a 4-byte autonomous system number can be configured in a regular expression using either asplain or asdot format, only 4-byte autonomous system numbers configured using the current default format are matched. In the first example, the show ip bgp regexp command is configured with a 4-byte autonomous system number in asplain format. The match fails because the default format is currently asdot format and there is no output. In the second example using asdot format, the match passes and the information about the 4-byte autonomous system path is shown using the asdot notation.
NoteThe asdot notation uses a period which is a special character in Cisco regular expressions. to remove the special meaning, use a backslash before the period.
Router# show ip bgp regexp ^65536$ Router# show ip bgp regexp ^1\.0$ BGP table version is 2, local router ID is 172.17.1.99 Status codes: s suppressed, d damped, h history, * valid, > best, i - internal, r RIB-failure, S Stale Origin codes: i - IGP, e - EGP, ? - incomplete Network Next Hop Metric LocPrf Weight Path *> 10.1.1.0/24 192.168.1.2 0 0 1.0 iThe following is sample output from the show ip bgp regexp command after the bgp asnotation dot command has been entered to display 4-byte autonomous system numbers in dot notation in Cisco IOS Release 12.0(32)SY8, 12.0(33)S3, 12.2(33)SRE, 12.2(33)XNE, 12.2(33)SXI1, Cisco IOS XE Release 2.4, or later release. The dot notation is the only format for 4-byte autonomous system numbers in Cisco IOS Release 12.0(32)S12, 12.4(24)T, or Cisco IOS XE Release 2.3.
NoteThe asdot notation uses a period which is a special character in Cisco regular expressions. to remove the special meaning, use a backslash before the period.
Router# show ip bgp regexp ^1\.14$ BGP table version is 4, local router ID is 172.17.1.99 Status codes: s suppressed, d damped, h history, * valid, > best, i - internal, r RIB-failure, S Stale Origin codes: i - IGP, e - EGP, ? - incomplete Network Next Hop Metric LocPrf Weight Path *> 10.1.1.0/24 192.168.1.2 0 0 1.14 iRelated Commands
Command
Description
bgp asnotation dot
Changes the default display and the regular expression match format of BGP 4-byte autonomous system numbers from asplain (decimal values) to dot notation.
router bgp
Configures the BGP routing process.
show ip bgp quote-regexp
Displays routes matching the autonomous system path regular expression.
show ip bgp replication
To display update replication statistics for Border Gateway Protocol (BGP) update groups, use the show ip bgp replication command in EXEC mode.
Command History
Release
Modification
12.0(24)S
This command was introduced.
12.2(18)S
This command was integrated into Cisco IOS Release 12.2(18)S.
12.3(4)T
This command was integrated into Cisco IOS Release 12.3(4)T.
12.2(27)SBC
This command was integrated into Cisco IOS Release 12.2(27)SBC.
12.2(33)SRA
This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2SX
This command is supported in the Cisco IOS Release 12.2SX train. Support in a specific 12.2SX release of this train depends on your feature set, platform, and platform hardware.
Usage Guidelines
The output of this command displays BGP update-group replication statistics.
When a change to outbound policy occurs, the router automatically recalculates update-group memberships and applies the changes by triggering an outbound soft reset after a 3-minute timer expires. This behavior is designed to provide the network operator with time to change the configuration if a mistake is made. You can manually enable an outbound soft reset before the timer expires by entering the clear ip bgp ip-address soft out command.
Examples
The following sample output from the show ip bgp replication command shows update-group replication information for all neighbors:
Router# show ip bgp replication BGP Total Messages Formatted/Enqueued : 0/0 Index Type Members Leader MsgFmt MsgRepl Csize Qsize 1 internal 1 10.4.9.21 0 0 0 0 2 internal 2 10.4.9.5 0 0 0 0The following sample output from the show ip bgp replicationcommand shows update-group statistics for the 10.4.9.5 neighbor:
Router# show ip bgp replication 10.4.9.5 Index Type Members Leader MsgFmt MsgRepl Csize Qsize 2 internal 2 10.4.9.5 0 0 0 0The table below describes the significant fields shown in the display.
show ip bgp rib-failure
To display Border Gateway Protocol (BGP) routes that failed to install in the Routing Information Base (RIB) table, use the show ip bgp rib-failure command in privileged EXEC mode.
Command History
Release
Modification
12.3
This command was introduced.
12.0(26)S
This command was integrated into Cisco IOS Release 12.0(26)S.
12.2(25)S
This command was integrated into Cisco IOS Release 12.2(25)S.
12.2(31)SB
This command was integrated into Cisco IOS Release 12.2(31)SB.
12.2(33)SRA
This command was integrated into Cisco IOS Release 12.2(33)SRA.
Examples
The following is sample output from the show ip bgp rib-failure command:
Router# show ip bgp rib-failure Network Next Hop RIB-failure RIB-NH Matches 10.1.15.0/24 10.1.35.5 Higher admin distance n/a 10.1.16.0/24 10.1.15.1 Higher admin distance n/aThe table below describes the significant fields shown in the display.
Table 32 show ip bgp rib-failure Field Descriptions Field
Description
Network
IP address of a network entity.
Next Hop
IP address of the next system that is used when forwarding a packet to the destination network. An entry of 0.0.0.0 indicates that the router has some non-BGP routes to this network.
RIB-failure
Cause of RIB failure. Higher admin distance means that a route with a better (lower) administrative distance such as a static route already exists in the IP routing table.
RIB-NH Matches
Route status that applies only when Higher admin distance appears in the RIB-failure column and bgp suppress-inactive is configured for the address family being used. There are three choices:
- Yes—Means that the route in the RIB has the same next hop as the BGP route or next hop recurses down to the same adjacency as the BGP nexthop.
- No—Means that the next hop in the RIB recurses down differently from the next hop of the BGP route.
- n/a—Means that bgp suppress-inactive is not configured for the address family being used.
show ip bgp rpki servers
To display the current state of communication with the Resource Public Key Infrastructure (RPKI) cache servers, use the show ip bgp rpki servers command in user EXEC or privileged EXEC mode.
Examples
The following is sample output from the show ip bgp rpki servers command:
Router# show ip bgp rpki servers BGP SOVC neighbor is 10.0.96.254 connected to port 32000 Flags 0, Refresh time is 5, Serial number is 1 InQ has 0 messages, OutQ has 0 messages, formatted msg 9 Session IO flags 0, Session flags 10000008 Neighbor Statistics: Nets Processed 13 Connection state is ESTAB, I/O status: 1, unread input bytes: 0 Connection is ECN Disabled Minimum incoming TTL 0, Outgoing TTL 255 Local host: 10.0.96.2, Local port: 56238 Foreign host: 10.0.96.254, Foreign port: 32000 Connection tableid (VRF): 0 Enqueued packets for retransmit: 0, input: 0 mis-ordered: 0 (0 bytes) Event Timers (current time is 0xCD931): Timer Starts Wakeups Next Retrans 10 0 0x0 TimeWait 0 0 0x0 AckHold 9 9 0x0 SendWnd 0 0 0x0 KeepAlive 0 0 0x0 GiveUp 0 0 0x0 PmtuAger 1 0 0x1554E6 DeadWait 0 0 0x0 Linger 0 0 0x0 iss: 1144343423 snduna: 1144343528 sndnxt: 1144343528 sndwnd: 5840 irs: 2151800169 rcvnxt: 2151800610 rcvwnd: 15944 delrcvwnd: 440 SRTT: 221 ms, RTTO: 832 ms, RTV: 611 ms, KRTT: 0 ms minRTT: 3 ms, maxRTT: 300 ms, ACK hold: 200 ms Status Flags: none Option Flags: higher precendence, nagle, path mtu capable Datagrams (max data segment is 1460 bytes): Rcvd: 11 (out of order: 0), with data: 9, total data bytes: 440 Sent: 20 (retransmit: 0 fastretransmit: 0),with data: 9, total data bytes: 104show ip bgp rpki table
To display the currently cached list of networks and associated autonomous system (AS) numbers received from the Resource Public Key Infrastructure (RPKI) server, use the show ip bgp rpki table command in user EXEC or privileged EXEC mode.
Usage Guidelines
This command is useful after configuring the bgp rpki server command to see the list of networks and corresponding AS numbers received from the RPKI server.
Examples
The following is sample output from the show ip bgp rpki table command:
Router# show ip bgp rpki table 12 BGP sovc network entries using 1056 bytes of memory 13 BGP sovc record entries using 260 bytes of memory Network Maxlen Origin-AS Source Neighbor 1.1.0.0/16 24 1 0 10.0.96.254 3.0.0.0/24 24 2 0 10.0.96.254 4.0.0.0/24 24 3 0 10.0.96.254 4.0.0.0/8 8 3 0 10.0.96.254 5.0.0.0/24 24 4 0 10.0.96.254 8.0.0.0/4 6 200 0 10.0.96.254 8.2.0.0/8 24 36394 0 10.0.96.254 9.2.0.0/16 24 34000 0 10.0.96.254 10.0.0.0/6 8 100 0 10.0.96.254The table below describes the significant fields shown in the display.
Table 33 show ip bgp rpki table Field Descriptions Field
Description
Network
Prefix and mask length received from RPKI server.
Maxlen
Limit on the prefix length of the corresponding network (the value is provided by the server).
Origin-AS
Number of the AS from which the prefix originated.
Source
Value is always 0.
Neighbor
IP address of the RPKI cache server from which the record came.
show ip bgp rtfilter
To display information about BGP route target (RT) filtering, use the show ip bgp rtfilter command in user EXEC or privileged EXEC mode.
Command History
Release
Modification
15.1(1)S
This command was introduced.
Cisco IOS XE Release 3.2S
This command was integrated into Cisco IOS XE Release 3.2S.
15.2(3)T
This command was integrated into Cisco IOS Release 15.2(3)T.
15.2(4)S
This command was integrated into Cisco IOS Release 15.2(4)S.
15.1(1)SY
This command was integrated into Cisco IOS Release 15.1(1)SY.
Usage Guidelines
Use this command if you have configured the BGP: RT Constrained Route Distribution feature and you want to display RT filter information.
NoteIf you enter the all keyword, many more optional keywords are available that are not shown here.
Examples
The following is sample output from the show ip bgp rtfilter all command:
Router# show ip bgp rtfilter all BGP table version is 14, local router ID is 192.168.7.7 Status codes: s suppressed, d damped, h history, * valid, > best, i - internal, r RIB-failure, S Stale, m multipath, b backup-path, x best-external, f RT-Filter Origin codes: i - IGP, e - EGP, ? - incomplete Network Next Hop Metric LocPrf Weight Path *>i0:0:0:0 192.168.2.2 0 100 0 i *>i1:2:1:100 192.168.6.6 0 100 0 i * i1:2:3:3 192.168.2.2 0 100 0 i *> 0.0.0.0 32768 i *>i1:2:150:1 192.168.6.6 0 100 0 i * i1:2:200:200 192.168.2.2 0 100 0 i *> 0.0.0.0 32768 iThe table below describes the fields shown in the display.
Table 34 show ip bgp rtfilter Field Descriptions Field
Description
Network
RT filter prefix.
Next Hop
Next hop in the RT filter prefix.
Metric
BGP metric associated with the RT filter prefix.
LocPref
BGP local preference.
Weight
BGP weight.
Path
Path information associated with the RT prefix.
The following is sample output from the show ip bgp rtfilter all summary command:
Router# show ip bgp rtfilter all summary BGP router identifier 192.168.7.7, local AS number 1 BGP table version is 14, main routing table version 14 5 network entries using 820 bytes of memory 7 path entries using 336 bytes of memory 2/2 BGP path/bestpath attribute entries using 256 bytes of memory 1 BGP rrinfo entries using 24 bytes of memory 2 BGP extended community entries using 48 bytes of memory 0 BGP route-map cache entries using 0 bytes of memory 0 BGP filter-list cache entries using 0 bytes of memory BGP using 1484 total bytes of memory BGP activity 7/0 prefixes, 14/5 paths, scan interval 60 secs Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd 192.168.2.2 4 1 13 12 14 0 0 00:03:21 5Related Commands
Command
Description
address-family rtfilter unicast
Enters address family configuration mode and enables Automated Route Target Filtering with a BGP peer.
neighbor default-originate
Allows a BGP speaker (the local router) to send the default route 0:0:0:0 to a neighbor for use as a default route.
show ip bgp rtfilter all summary
Displays summary information about RT filtering.
show ip bgp summary
To display the status of all Border Gateway Protocol (BGP) connections, use the show ip bgp summary command in user EXEC or privileged EXEC mode.
show ip bgp [ ipv4 { multicast | unicast } | vpnv4 all | vpnv6 unicast all | topology { * | routing-topology-instance-name } ] [update-group] summary [slow]
Syntax Description
ipv4 {multicast | unicast}
(Optional) Displays peers in the IPv4 address family.
vpnv4 all
(Optional) Displays peers in the VPNv4 address family.
vpnv6 unicast all
(Optional) Displays peers in the VPNv6 address family.
topology
(Optional) Displays routing topology information.
*
(Optional) Displays all routing topology instances.
routing-topology-instance-name
(Optional) Displays routing topology information for that instance.
update-group
(Optional) Includes information about the update group of the peers.
slow
(Optional) Displays only information about dynamically configured slow peers.
Command History
Release
Modification
10.0
This command was introduced.
12.0
Support for the neighbor maximum-prefix command was added to the output.
12.2
This command was modified.
12.2(33)SRA
This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.4(11)T
This command was modified. A line was added to the output to display the advertised bitfield cache entries and associated memory usage.
12.2(33)SXH
This command was integrated into Cisco IOS Release 12.2(33)SXH, and the output was modified to support BGP dynamic neighbors.
12.0(32)S12
This command was modified. Support for displaying 4-byte autonomous system numbers in asdot notation only was added.
12.0(32)SY8
This command was modified. Support for displaying 4-byte autonomous system numbers in asplain and asdot notation was added.
12.4(24)T
This command was modified. Support for displaying 4-byte autonomous system numbers in asdot notation only was added.
Cisco IOS XE Release 2.3
This command was modified. Support for displaying 4-byte autonomous system numbers in asdot notation only was added.
12.2(33)SXI1
This command was modified. Support for 4-byte autonomous system numbers in asplain and asdot notation was added.
12.0(33)S3
This command was modified. Support for displaying 4-byte autonomous system numbers in asplain notation was added and the default display format is now asplain.
Cisco IOS XE Release 2.4
This command was modified. Support for displaying 4-byte autonomous system numbers in asplain notation was added and the default display format is now asplain.
12.2(33)SRE
This command was modified. Support for displaying 4-byte autonomous system numbers in asplain and asdot notation was added.
12.2(33)XNE
This command was modified. Support for displaying 4-byte autonomous system numbers in asplain and asdot notation was added.
15.0(1)S
This command was modified. The slow keyword was added.
Cisco IOS XE Release 3.1S
This command was modified. The slow keyword was added.
15.2(1)S
This command was modified. It will show information about how many paths are in each RPKI state.
Cisco IOS XE Release 3.5S
This command was modified. It will show information about how many paths are in each RPKI state.
15.1(1)SG
This command was modified. Support for displaying 4-byte autonomous system numbers in asplain and asdot notation was added.
Cisco IOS XE Release 3.3SG
This command was modified. Support for displaying 4-byte autonomous system numbers in asplain and asdot notation was added.
15.2(4)S
This command was implemented on the Cisco 7200 series routers.
Usage Guidelines
The show ip bgp summary command is used to display BGP path, prefix, and attribute information for all connections to BGP neighbors.
A prefix is an IP address and network mask. It can represent an entire network, a subset of a network, or a single host route. A path is a route to a given destination. By default, BGP will install only a single path for each destination. If multipath routes are configured, BGP will install a path entry for each multipath route, and only one multipath route will be marked as the bestpath.
BGP attribute and cache entries are displayed individually and in combinations that affect the bestpath selection process. The fields for this output are displayed when the related BGP feature is configured or attribute is received. Memory usage is displayed in bytes.
In Cisco IOS Release 12.0(32)SY8, 12.0(33)S3, 12.2(33)SRE, 12.2(33)XNE, 12.2(33)SXI1, Cisco IOS XE Release 2.4, and later releases, the Cisco implementation of 4-byte autonomous system numbers uses asplain—65538 for example—as the default regular expression match and output display format for autonomous system numbers, but you can configure 4-byte autonomous system numbers in both the asplain format and the asdot format as described in RFC 5396. To change the default regular expression match and output display of 4-byte autonomous system numbers to asdot format, use the bgp asnotation dot command followed by the clear ip bgp * command to perform a hard reset of all current BGP sessions.
In Cisco IOS Release 12.0(32)S12, 12.4(24)T, and Cisco IOS XE Release 2.3, the Cisco implementation of 4-byte autonomous system numbers uses asdot—1.2 for example—as the only configuration format, regular expression match, and output display, with no asplain support.
Examples
The following is sample output from the show ip bgp summary command in privileged EXEC mode:
Router# show ip bgp summary BGP router identifier 172.16.1.1, local AS number 100 BGP table version is 199, main routing table version 199 37 network entries using 2850 bytes of memory 59 path entries using 5713 bytes of memory 18 BGP path attribute entries using 936 bytes of memory 2 multipath network entries and 4 multipath paths 10 BGP AS-PATH entries using 240 bytes of memory 7 BGP community entries using 168 bytes of memory 0 BGP route-map cache entries using 0 bytes of memory 0 BGP filter-list cache entries using 0 bytes of memory 90 BGP advertise-bit cache entries using 1784 bytes of memory 36 received paths for inbound soft reconfiguration BGP using 34249 total bytes of memory Dampening enabled. 4 history paths, 0 dampened paths BGP activity 37/2849 prefixes, 60/1 paths, scan interval 15 secs Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd 10.100.1.1 4 200 26 22 199 0 0 00:14:23 23 10.200.1.1 4 300 21 51 199 0 0 00:13:40 0The table below describes the significant fields shown in the display. Fields that are preceded by the asterisk character (*) are not shown in the above output.
Table 35 show ip bgp summary Field Descriptions Field
Description
BGP router identifier
In order of precedence and availability, the router identifier specified by the bgp router-id command, a loopback address, or the highest IP address.
BGP table version
Internal version number of BGP database.
main routing table version
Last version of BGP database that was injected into the main routing table.
...network entries
Number of unique prefix entries in the BGP database.
...using ... bytes of memory
Amount of memory, in bytes, that is consumed for the path, prefix, or attribute entry displayed on the same line.
...path entries using
Number of path entries in the BGP database. Only a single path entry will be installed for a given destination. If multipath routes are configured, a path entry will be installed for each multipath route.
...multipath network entries using
Number of multipath entries installed for a given destination.
* ...BGP path/bestpath attribute entries using
Number of unique BGP attribute combinations for which a path is selected as the bestpath.
* ...BGP rrinfo entries using
Number of unique ORIGINATOR and CLUSTER_LIST attribute combinations.
...BGP AS-PATH entries using
Number of unique AS_PATH entries.
...BGP community entries using
Number of unique BGP community attribute combinations.
*...BGP extended community entries using
Number of unique extended community attribute combinations.
BGP route-map cache entries using
Number of BGP route-map match and set clause combinations. A value of 0 indicates that the route cache is empty.
...BGP filter-list cache entries using
Number of filter-list entries that match an AS-path access list permit or deny statements. A value of 0 indicates that the filter-list cache is empty.
BGP advertise-bit cache entries using
(Cisco IOS Release 12.4(11)T and later releases only) Number of advertised bitfield entries and the associated memory usage. A bitfield entry represents a piece of information (one bit) that is generated when a prefix is advertised to a peer. The advertised bit cache is built dynamically when required.
...received paths for inbound soft reconfiguration
Number paths received and stored for inbound soft reconfiguration.
BGP using...
Total amount of memory, in bytes, used by the BGP process.
Dampening enabled...
Indicates that BGP dampening is enabled. The number of paths that carry an accumulated penalty and the number of dampened paths are displayed on this line.
BGP activity...
Displays the number of times that memory has been allocated or released for a path or prefix.
Neighbor
IP address of the neighbor.
V
BGP version number spoken to the neighbor.
AS
Autonomous system number.
MsgRcvd
Number of messages received from the neighbor.
MsgSent
Number of messages sent to the neighbor.
TblVer
Last version of the BGP database that was sent to the neighbor.
InQ
Number of messages queued to be processed from the neighbor.
OutQ
Number of messages queued to be sent to the neighbor.
Up/Down
The length of time that the BGP session has been in the Established state, or the current status if not in the Established state.
State/PfxRcd
Current state of the BGP session, and the number of prefixes that have been received from a neighbor or peer group. When the maximum number (as set by the neighbor maximum-prefix command) is reached, the string “PfxRcd” appears in the entry, the neighbor is shut down, and the connection is set to Idle.
An (Admin) entry with Idle status indicates that the connection has been shut down using the neighbor shutdown command.
The following output from the show ip bgp summary command shows that the BGP neighbor 192.168.3.2 was dynamically created and is a member of the listen range group, group192. The output also shows that the IP prefix range of 192.168.0.0/16 is defined for the listen range group named group192. In Cisco IOS Release 12.2(33)SXH and later releases, the BGP dynamic neighbor feature introduced the ability to support the dynamic creation of BGP neighbor peers using a subnet range associated with a peer group (listen range group).
Router# show ip bgp summary BGP router identifier 192.168.3.1, local AS number 45000 BGP table version is 1, main routing table version 1 Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd *192.168.3.2 4 50000 2 2 0 0 0 00:00:37 0 * Dynamically created based on a listen range command Dynamically created neighbors: 1/(200 max), Subnet ranges: 1 BGP peergroup group192 listen range group members: 192.168.0.0/16The following output from the show ip bgp summary command shows two BGP neighbors, 192.168.1.2 and 192.168.3.2, in different 4-byte autonomous system numbers, 65536 and 65550. The local autonomous system 65538 is also a 4-byte autonomous system number and the numbers are displayed in the default asplain format. This example requires Cisco IOS Release 12.0(32)SY8, 12.0(33)S3, 12.2(33)SRE, 12.2(33)XNE, 12.2(33)SXI1, Cisco IOS XE Release 2.4, or a later release.
Router# show ip bgp summary BGP router identifier 172.17.1.99, local AS number 65538 BGP table version is 1, main routing table version 1 Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down Statd 192.168.1.2 4 65536 7 7 1 0 0 00:03:04 0 192.168.3.2 4 65550 4 4 1 0 0 00:00:15 0The following output from the show ip bgp summary command shows the same two BGP neighbors, but the 4-byte autonomous system numbers are displayed in asdot notation format. To change the display format the bgp asnotation dot command must be configured in router configuration mode. This example requires Cisco IOS Release 12.0(32)SY8, 12.0(32)S12, 12.2(33)SRE, 12.2(33)XNE, 12.2(33)SXI1, 12.4(24)T, or Cisco IOS XE Release 2.3 or later releases.
Router# show ip bgp summary BGP router identifier 172.17.1.99, local AS number 1.2 BGP table version is 1, main routing table version 1 Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down Statd 192.168.1.2 4 1.0 9 9 1 0 0 00:04:13 0 192.168.3.2 4 1.14 6 6 1 0 0 00:01:24 0The following example displays sample output of the show ip bgp summary slow command:
Router# show ip bgp summary slow BGP router identifier 2.2.2.2, local AS number 100 BGP table version is 37, main routing table version 37 36 network entries using 4608 bytes of memory 36 path entries using 1872 bytes of memory 1/1 BGP path/bestpath attribute entries using 124 bytes of memory 1 BGP rrinfo entries using 24 bytes of memory 2 BGP AS-PATH entries using 48 bytes of memory 1 BGP extended community entries using 24 bytes of memory 0 BGP route-map cache entries using 0 bytes of memory 0 BGP filter-list cache entries using 0 bytes of memory BGP using 6700 total bytes of memory BGP activity 46/0 prefixes, 48/0 paths, scan interval 60 secs Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd 6.6.6.6 4 100 11 10 1 0 0 00:44:20 0The following example displays counts of prefix/AS pairs for each RPKI state. The fourth line of output indicates "Path RPKI states: x valid, x not found, x invalid." Of course the line of output indicating RPKI states can be displayed only if the bgp rpki server command or the neighbor announce rpki state command is configured.
Router> show ip bgp summary For address family: IPv4 Unicast BGP router identifier 10.0.96.2, local AS number 2 BGP table version is 8, main routing table version 8 Path RPKI states: 0 valid, 7 not found, 0 invalid 6 network entries using 888 bytes of memory 7 path entries using 448 bytes of memory 3/3 BGP path/bestpath attribute entries using 384 bytes of memory 2 BGP AS-PATH entries using 48 bytes of memory 0 BGP route-map cache entries using 0 bytes of memory 0 BGP filter-list cache entries using 0 bytes of memory BGP using 1768 total bytes of memory BGP activity 12/0 prefixes, 14/0 paths, scan interval 60 secs Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State /PfxRcd 10.0.0.3 4 3 6 9 8 0 0 00:01:04 3 10.0.2.4 4 2 5 8 8 0 0 00:01:15 0 10.0.3.5 4 4 6 7 8 0 0 00:01:14 3 10.0.96.254 4 1 0 0 1 0 0 never Idle For address family: IPv6 Unicast BGP router identifier 10.0.96.2, local AS number 2 BGP table version is 9, main routing table version 9 Path RPKI states: 3 valid, 4 not found, 0 invalid 6 network entries using 1032 bytes of memory 7 path entries using 616 bytes of memory 5/5 BGP path/bestpath attribute entries using 640 bytes of memory 2 BGP AS-PATH entries using 48 bytes of memory 0 BGP route-map cache entries using 0 bytes of memory 0 BGP filter-list cache entries using 0 bytes of memory BGP using 2336 total bytes of memory BGP activity 12/0 prefixes, 14/0 paths, scan interval 60 secs Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State /PfxRcd 2001::2 4 2 6 9 6 0 0 00:01:08 2 2002::1 4 3 7 11 9 0 0 00:01:07 2 2003::2 4 4 6 8 9 0 0 00:01:08 2Related Commands
Command
Description
bgp asnotation dot
Changes the default display and the regular expression match format of BGP 4-byte autonomous system numbers from asplain (decimal values) to dot notation.
bgp router-id
Configures a fixed router ID for the local BGP routing process.
neighbor maximum-prefix
Controls how many prefixes can be received from a BGP neighbor.
neighbor shutdown
Disables a BGP neighbor or peer group.
neighbor slow-peer split-update-group dynamic
Causes a dynamically detected slow peer to be moved to a slow update group.
router bgp
Configures the BGP routing process.
show ip bgp template peer-policy
To display locally configured peer policy templates, use the show ip bgp template peer-policy command in user EXEC or privileged EXEC mode.
Command Default
If a peer policy template is not specified using the policy-template-name argument, all peer policy templates will be displayed.
Command History
Release
Modification
12.0(24)S
This command was introduced.
12.0(25)S
The detail keyword was added.
12.2(18)S
This command was integrated into Cisco IOS Release 12.2(18)S.
12.3(4)T
This command was integrated into Cisco IOS Release 12.3(4)T.
12.2(27)SBC
This command was integrated into Cisco IOS Release 12.2(27)SBC.
12.4(11)T
Support for the detail keyword was integrated into Cisco IOS Release 12.4(11)T.
12.2(33)SRB
This command and support for the detail keyword were integrated into Cisco IOS Release 12.2(33)SRB.
12.2SX
This command is supported in the Cisco IOS Release 12.2SX train. Support in a specific 12.2SX release of this train depends on your feature set, platform, and platform hardware.
12.2(33)SB
Support for the detail keyword was integrated into Cisco IOS Release 12.2(33)SB.
15.1(1)SY
This command was integrated into Cisco IOS Release 15.1(1)SY.
Usage Guidelines
This command is used to display locally configured peer policy templates. The output can be filtered to display a single peer policy template using the policy-template-name argument. This command also supports all standard output modifiers.
When BGP neighbors use multiple levels of peer templates it can be difficult to determine which policies are associated with a specific template. In Cisco IOS Release 12.0(25)S, 12.4(11)T, 12.2(33)SRB, 12.2(33)SB, and later releases, the detail keyword was added to display the detailed configuration of local and inherited policies associated with a specific template. Inherited policies are policies that the template inherits from other peer-policy templates.
Examples
The show ip bgp template peer-policy command is used to verify the configuration of local peer policy templates. The following sample output shows the peer policy templates named GLOBAL and NETWORK1. The output also shows that the GLOBAL template was inherited by the NETWORK1 template.
Device# show ip bgp template peer-policy Template:GLOBAL, index:1. Local policies:0x80840, Inherited polices:0x0 *Inherited by Template NETWORK1, index:2 Locally configured policies: prefix-list NO-MARKETING in weight 300 maximum-prefix 10000 Inherited policies: Template:NETWORK1, index:2. Local policies:0x1, Inherited polices:0x80840 This template inherits: GLOBAL, index:1, seq_no:10, flags:0x1 Locally configured policies: route-map ROUTE in Inherited policies: prefix-list NO-MARKETING in weight 300 maximum-prefix 10000The table below describes the significant fields shown in the display.
Table 36 show ip bgp template peer-policy Field Descriptions Field
Description
Template
Name of the peer template.
index
The sequence number in which the displayed template is processed.
Local policies
Displays the hexadecimal value of locally configured policies.
Inherited polices
Displays the hexadecimal value of inherited policies. The 0x0 value is displayed when no templates are inherited.
Locally configured policies
Displays a list of commands that are locally configured in a peer policy template.
Inherited policies
Displays a list of commands that are inherited from a peer template.
The following sample output of the show ip bgp template peer-policy command with the detail keyword displays details of the template named NETWORK1, which includes the inherited template named GLOBAL. The output in this example displays the configuration commands of the locally configured route map and prefix list and the inherited prefix list.
Device# show ip bgp template peer-policy NETWORK1 detail Template:NETWORK1, index:2. Local policies:0x1, Inherited polices:0x80840 This template inherits: GLOBAL, index:1, seq_no:10, flags:0x1 Locally configured policies: route-map ROUTE in Inherited policies: prefix-list NO-MARKETING in weight 300 maximum-prefix 10000 Template:NETWORK1 <detail> Locally configured policies: route-map ROUTE in route-map ROUTE, permit, sequence 10 Match clauses: ip address prefix-lists: DEFAULT ip prefix-list DEFAULT: 1 entries seq 5 permit 10.1.1.0/24 Set clauses: Policy routing matches: 0 packets, 0 bytes Inherited policies: prefix-list NO-MARKETING in ip prefix-list NO-MARKETING: 1 entries seq 5 deny 10.2.2.0/24show ip bgp template peer-session
To display peer policy template configurations, use the show ip bgp template peer-session command in user EXEC or privileged EXEC mode.
Command Default
If a peer session template is not specified with the session-template-name argument, all peer session templates will be displayed.
Command History
Release
Modification
12.0(24)S
This command was introduced.
12.3(4)T
This command was integrated into Cisco IOS Release 12.3(4)T.
12.2(18)S
This command was integrated into Cisco IOS Release 12.2(18)S.
12.2(27)SBC
This command was integrated into Cisco IOS Release 12.2(27)SBC.
12.2(31)SB
This command was integrated into Cisco IOS Release 12.2(31)SB.
12.2SX
This command is supported in the Cisco IOS Release 12.2SX train. Support in a specific 12.2SX release of this train depends on your feature set, platform, and platform hardware.
Cisco IOS XE Release 3.8S
This command was modified. The cluster ID for the template is displayed.
Usage Guidelines
This command is used to display locally configured peer session templates. The output can be filtered to display a single peer session template with the peer-session-name argument. This command also supports all standard output modifiers.
Examples
The show ip bgp template peer-session command is used to verify the configuration of local peer session templates. The following example shows the peer session templates named INTERNAL-BGP and CORE1. The output also shows that INTERNAL-BGP is inherited by CORE1.
Device# show ip bgp template peer-session Template:INTERNAL-BGP, index:1 Local policies:0x21, Inherited policies:0x0 *Inherited by Template CORE1, index= 2 Locally configured session commands: remote-as 202 timers 30 300 Inherited session commands: Template:CORE1, index:2 Local policies:0x180, Inherited policies:0x21 This template inherits: INTERNAL-BGP index:1 flags:0x0 Locally configured session commands: update-source loopback 1 description CORE-123 Inherited session commands: remote-as 202 timers 30 300The table below describes the significant fields shown in the display.
Table 37 show ip bgp template peer-session Field Descriptions Field
Description
Template:
Name of the peer template.
index:
The sequence number in which the displayed template is processed.
Local policies:
Displays the hexadecimal value of locally configured policies.
Inherited policies:
Displays the hexadecimal value of inherited policies. The 0x0 value is displayed when no templates are inherited.
Locally configured session commands:
Displays a list of commands that are locally configured in a peer template.
Inherited session commands:
Displays a list of commands that are inherited from a peer session template.
The following sample output displays the cluster ID assigned to the template:
Device# show ip bgp template peer-session TS1 Template:TS1, index:1 Local policies:0x10000000, Inherited policies:0x0 Locally configured session commands: cluster-id 192.168.0.115 Inherited session commands:Related Commands
Command
Description
bgp cluster-id
Sets the global cluster ID on a route reflector.
inherit peer-session
Configures a peer session template to inherit the configuration from another peer session template.
neighbor cluster-id
Sets the cluster ID for a neighbor.
template peer-session
Creates a peer session template and enters session-template configuration mode.
show ip bgp unicast route-server
To display on a BGP route server which paths are chosen for a route server context, in particular if the normal bestpath was overridden or suppressed, use the show ip bgp unicast route-server command in privileged EXEC mode.
Usage Guidelines
Use this command on a BGP route server to see the next hop to network prefixes and additional information about the path.
Examples
The following output displays all the routes chosen by the policy for the context named example-context:
Route-Server# show ip bgp ipv4 unicast route-server context example-context Networks for route server context example-context: Network Next Hop Metric LocPrf Weight Path * 1.1.1.1/32 10.10.10.22 123 0 22 ? * 1.1.2.0/24 10.10.10.22 123 0 22 ? * 1.3.0.0/16 10.10.10.22 123 0 22 ? * 8.8.0.0/16 10.10.10.22 123 0 22 ? 100.100.100.21/32 (suppressed) *> 100.100.100.22/32 10.10.10.22 123 0 22 ? * 100.100.100.23/32 10.10.10.23 123 0 23 ? *> 100.100.100.24/32 10.10.10.24 123 0 24 ? *> 100.100.100.25/32 10.10.10.25 123 0 25 ? *> 100.100.100.26/32 10.10.10.26 123 0 26 ?Three types of routes can be in a context, as shown in the preceding output. They are:
- Those where the policy for the context chooses the same path as the regular BGP best path algorithm (for example, 100.100.100.25/32, denoted by “>”).
- Those where the policy for the context excluded the regular best path, but found a suitable alternative path to advertise to the client (for example, 1.1.1.1/32, not denoted with “>”, but still valid “*”).
- Those where the policy for the context excluded all available paths and therefore those routes will not be sent to the client; for example, 100.100.100.21/32, denoted by “(suppressed)”.
In the following example, specifying all instead of a specific context reveals that different contexts may have differing routes due to the configured policy:
Route-Server# show ip bgp ipv4 unicast route-server all Networks for route server context all-base: Network Next Hop Metric LocPrf Weight Path *> 1.1.1.1/32 10.10.10.21 23 0 21 ? *> 1.1.2.0/24 10.10.10.21 23 0 21 ? *> 1.3.0.0/16 10.10.10.21 23 0 21 ? *> 8.8.0.0/16 10.10.10.21 23 0 21 ? *> 100.100.100.21/32 10.10.10.21 23 0 21 ? *> 100.100.100.22/32 10.10.10.22 123 0 22 ? *> 100.100.100.23/32 10.10.10.21 23 0 21 ? * 100.100.100.24/32 10.10.10.24 123 0 24 ? *> 100.100.100.25/32 10.10.10.25 123 0 25 ? *> 100.100.100.26/32 10.10.10.26 123 0 26 ? Networks for route server context all-policy-deny: Network Next Hop Metric LocPrf Weight Path 1.1.1.1/32 (suppressed) 1.1.2.0/24 (suppressed) 1.3.0.0/16 (suppressed) 8.8.0.0/16 (suppressed) 100.100.100.21/32 (suppressed) 100.100.100.22/32 (suppressed) 100.100.100.23/32 (suppressed) 100.100.100.24/32 (suppressed) 100.100.100.25/32 (suppressed) 100.100.100.26/32 (suppressed) Networks for route server context all-policy: Network Next Hop Metric LocPrf Weight Path * 1.1.1.1/32 10.10.10.27 878 0 27 ? * 1.1.2.0/24 10.10.10.27 878 0 27 ? * 1.3.0.0/16 10.10.10.27 878 0 27 ? * 8.8.0.0/16 10.10.10.27 878 0 27 ? * 100.100.100.21/32 10.10.10.27 878 0 27 ? * 100.100.100.22/32 10.10.10.27 878 0 27 ? * 100.100.100.23/32 10.10.10.27 878 0 27 ? * 100.100.100.24/32 10.10.10.27 878 0 27 ? * 100.100.100.25/32 10.10.10.27 878 0 27 ? * 100.100.100.26/32 10.10.10.27 878 0 27 ? Networks for route server context example-context: Network Next Hop Metric LocPrf Weight Path * 1.1.1.1/32 10.10.10.23 123 0 23 ? * 1.1.2.0/24 10.10.10.23 123 0 23 ? * 1.3.0.0/16 10.10.10.23 123 0 23 ? * 8.8.0.0/16 10.10.10.23 123 0 23 ? 100.100.100.21/32 (suppressed) *> 100.100.100.22/32 10.10.10.22 123 0 22 ? * 100.100.100.23/32 10.10.10.23 123 0 23 ? * 100.100.100.24/32 10.10.10.24 123 0 24 ? *> 100.100.100.25/32 10.10.10.25 123 0 25 ? *> 100.100.100.26/32 10.10.10.26 123 0 26 ?In the following example, the summary keyword displays output similar to the show ip bgp summary command in that it shows the neighbor state for route server clients in the specified context (or all contexts):
Route-Server# show ip bgp ipv4 unicast route-server context example-context summary Route server clients assigned to context example-context: Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd 10.10.10.18 4 18 283 291 13 0 0 04:13:21 0In the following example, the allkeyword and the summary keyword display summary output for all contexts:
Route-Server# show ip bgp ipv4 unicast route-server all summary Route server clients without assigned contexts: Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd 10.10.10.12 4 12 12 17 12 0 0 00:08:29 0 Route server clients assigned to context all-base: Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd 10.10.10.14 4 14 12 17 12 0 0 00:08:25 0 Route server clients assigned to context all-policy-deny: Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd 10.10.10.16 4 16 12 13 12 0 0 00:08:24 0 Route server clients assigned to context all-policy: Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd 10.10.10.13 4 13 11 14 12 0 0 00:08:22 0 Route server clients assigned to context example-context: Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd 10.10.10.18 4 18 12 17 12 0 0 00:08:30 0show ip bgp update-group
To display information about the Border Gateway Protocol (BGP) update groups, use the show ip bgp update-group command in user EXEC or privileged EXEC mode.
Syntax Description
index-group
(Optional) Update group type with its corresponding index number. The range of update-group index numbers is from 1 to 4294967295.
ip-address
(Optional) IP address of a single neighbor that is a member of an update group.
ipv6-address
(Optional) IPv6 address of a single neighbor that is member of an update group.
summary
(Optional) Displays a summary of update-group member information. The output can be filtered to show information for a single index group or peer with the index-group, ip-address, or ipv6-address argument.
Command History
Release
Modification
12.0(24)S
This command was introduced.
12.2(18)S
This command was integrated into Cisco IOS Release 12.2(18)S. The ipv6-address argument was added.
12.3(4)T
This command was integrated into Cisco IOS Release 12.3(4)T.
12.2(27)SBC
This command was integrated into Cisco IOS Release 12.2(27)SBC.
12.2SX
This command is supported in the Cisco IOS Release 12.2SX train. Support in a specific 12.2SX release of this train depends on your feature set, platform, and platform hardware.
Cisco IOS XE Release 3.8S
This command was modified. The cluster ID for the update group is displayed.
Usage Guidelines
Use this command to display information about BGP update groups. When a change to BGP outbound policy occurs, the router automatically recalculates update group memberships and applies the changes by triggering an outbound soft reset after a 1-minute timer expires. This behavior is designed to provide the network operator with time to change the configuration if a mistake is made. You can manually enable an outbound soft reset before the timer expires by entering the clear ip bgp ip-address soft out command.
NoteIn Cisco IOS Release 12.0(25)S, 12.3(2)T, and earlier releases, the update group recalculation delay timer is set to 3 minutes.
Neighbors with different cluster IDs are assigned to different update groups.
Examples
The following sample output from the show ip bgp update-group command shows update group information for all neighbors:
Device# show ip bgp update-group BGP version 4 update-group 1, internal, Address Family: IPv4 Unicast BGP Update version : 0, messages 0/0 Route map for outgoing advertisements is COST1 Update messages formatted 0, replicated 0 Number of NLRIs in the update sent: max 0, min 0 Minimum time between advertisement runs is 5 seconds Has 1 member: 10.4.9.21 BGP version 4 update-group 2, internal, Address Family: IPv4 Unicast BGP Update version : 0, messages 0/0 Update messages formatted 0, replicated 0 Number of NLRIs in the update sent: max 0, min 0 Minimum time between advertisement runs is 5 seconds Has 2 members: 10.4.9.5 10.4.9.8The table below describes the significant fields shown in the display.
Table 38 show ip bgp update-group Field Descriptions Field
Description
BGP version
BGP version.
update-group
Update-group number and type (internal or external).
Update messages formatted 0, replicated 0
Number of update messages that have been formatted and replicated.
Number of NLRIs...
NLRI sent in an update.
Minimum time between advertisement runs
Minimum time, in seconds, between update advertisements.
Has 2 members
Number of members listed by IP address in the update group.
The following sample output from the show ip bgp update-group command shows a summary of update-group information for the 10.4.9.8 neighbor:
Device# show ip bgp update-group 10.4.9.8 summary Summary for Update-group 2 : ------------------------------ BGP router identifier 10.4.9.4, local AS number 101 BGP table version is 1, main routing table version 1 Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd 10.4.9.5 4 101 35 35 1 0 0 00:26:22 0 10.4.9.8 4 101 39 39 1 0 0 00:26:21 0The table below describes the significant fields shown in the display.
Table 39 show ip bgp update-group summary Field Descriptions Field
Description
Summary for Update-group 2
Update-group number.
BGP router identifier 10.4.9.4
IP address and AS number for the specified peer.
BGP table version...
Displays incremental changes in the BGP routing table.
Neighbor...
Specific peer information and statistics, including IP address and AS number.
The following sample output displays the cluster ID assigned to the update group:
Device# show ip bgp update-group 1.1.1.1 BGP version 4 update-group 60, internal, Address Family: IPv4 Unicast BGP Update version : 391/0, messages 0 Route-Reflector Client Configured with the cluster-id 4.0.0.115 Topology: global, highest version: 391, tail marker: 391 Format state: Current working (OK, last not in list) Refresh blocked (not in list, last not in list) Update messages formatted 0, replicated 0, current 0, refresh 0, limit 1000 Number of NLRIs in the update sent: max 0, min 0 Minimum time between advertisement runs is 0 seconds Has 1 member: 1.1.1.1Related Commands
Command
Description
bgp cluster-id
Sets the global cluster ID on a route reflector.
clear ip bgp
Resets a BGP connection or session.
clear ip bgp update-group
Clears BGP update-group member sessions.
debug ip bgp groups
Displays information related to the processing of BGP update groups.
neighbor cluster-id
Sets the cluster ID for a neighbor.
show ip bgp replication
Displays BGP update-group replication statistics.
show ip bgp vpnv4
To display VPN Version 4 (VPNv4) address information from the Border Gateway Protocol (BGP) table, use the show ip bgp vpnv4 command in user EXEC or privileged EXEC mode.
show ip bgp vpnv4 { all | rd route-distinguisher | vrf vrf-name } [ [ ip-prefix /length [ mask | bestpath | multipaths ] | network-address [ mask | bestpath | longer-prefixes | multipaths | shorter-prefixes | subnets ] ] | cidr-only | cluster-ids | community | community-list | dampening | extcommunity-list extcommunity-list-name | filter-list | inconsistency nexthop-label | inconsistent-as | labels | neighbors [ { ip-address | ipv6-address } [ advertised-routes | dampened-routes | flap-statistics | paths | policy [detail] | received | received-routes | routes ] | slow ] | nexthops | oer-paths | path-attribute { discard | unknown } | paths [line] | peer-group | pending-prefixes | prefix-list prefix-list-name | quote-regexp | regexp | replication [update-group-index] [update-group-member-address] | rib-failure | route-map route-map-name | summary | update-group | update-source | version { version-number | recent offset-value } ]
Syntax Description
all
Displays the complete VPNv4 database.
rd route-distinguisher
Displays Network Layer Reachability Information (NLRI) prefixes that match the named route distinguisher.
vrf vrf-name
Displays NLRI prefixes associated with the named VPN routing and forwarding (VRF) instance.
ip-prefix/length
(Optional) IP prefix address (in dotted decimal format) and the length of the mask (0 to 32). The slash mark must be included.
longer-prefixes
(Optional) Displays the entry, if any, that exactly matches the specified prefix parameter and all entries that match the prefix in a “longest-match” sense. That is, prefixes for which the specified prefix is an initial substring.
network-address
(Optional) IP address of a network in the BGP routing table.
mask
(Optional) Mask of the network address, in dotted decimal format.
cidr-only
(Optional) Displays only routes that have nonclassful netmasks.
cluster-ids
(Optional) Displays configured cluster IDs.
community
(Optional) Displays routes that match this community.
community-list
(Optional) Displays routes that match this community list.
dampening
(Optional) Displays paths suppressed because of dampening (BGP route from peer is up and down).
extcommunity-list extended-community-list-name
(Optional) Displays routes that match the extended community list.
filter-list
(Optional) Displays routes that conform to the filter list.
inconsistency nexthop-label
(Optional) Displays all inconsistent paths.
inconsistent-as
(Optional) Displays only routes that have inconsistent autonomous systems of origin.
labels
(Optional) Displays incoming and outgoing BGP labels for each NLRI prefix.
neighbors
(Optional) Displays details about TCP and BGP neighbor connections.
ip-address
(Optional) Displays information about the neighbor at this IPv4 address.
ipv6-address
(Optional) Displays information about the neighbor at this IPv6 address.
advertised-routes
(Optional) Displays advertised routes from the specified neighbor.
dampened-routes
(Optional) Displays dampened routes from the specified neighbor.
flap-statistics
(Optional) Displays flap statistics about the specified neighbor.
paths
(Optional) Displays path information.
line
(Optional) A regular expression to match the BGP autonomous system paths.
policy [detail]
(Optional) Displays configured policies for the specified neighbor.
slow
(Optional) Displays BGP slow peer information.
nexthops
(Optional) Displays nexthop address table.
oer-paths
(Optional) Displays all OER-controlled paths.
path-attribute
(Optional) Displays path-attribute-specific information.
discard
(Optional) Displays prefixes with discarded path attribute.
unknown
(Optional) Displays prefixes with unknown path attribute.
paths
(Optional) Displays path information.
line
(Optional) A regular expression to match the BGP autonomous system paths.
peer-group
(Optional) Displays information about peer groups.
pending-prefixes
(Optional) Displays prefixes that are pending deletion.
prefix-list prefix-list
(Optional) Displays routes that match the prefix list.
quote-regexp
(Optional) Displays routes that match the autonomous system path regular expression.
regexp
(Optional) Displays routes that match the autonomous system path regular expression.
replication
(Optional) Displays replication status of update group(s).
rib-failure
(Optional) Displays BGP routes that failed to install in the VRF table.
route-map
(Optional) Displays routes that match the route map.
summary
(Optional) Displays BGP neighbor status.
update-group
(Optional) Displays information on update groups.
update-source
(Optional) Displays update source interface table.
version
(Optional) Displays prefixes with matching version numbers.
version-number
(Optional) If the version keyword is specified, either a version-number or the recent keyword and an offset-value are required.
recent offset-value
(Optional) Displays prefixes with matching version numbers.
Command History
Release
Modification
12.0(5)T
This command was introduced.
12.2(2)T
This command was modified. The output of the show ip bgp vpnv4 all ip-prefix command was enhanced to display attributes including multipaths and a best path to the specified network.
12.0(21)ST
This command was modified. The tags keyword was replaced by the labels keyword to conform to the MPLS guidelines.
12.2(14)S
This command was integrated into Cisco IOS Release 12.2(14)S.
12.0(22)S
This command was integrated into Cisco IOS Release 12.0(22)S.
12.2(13)T
This command was integrated into Cisco IOS Release 12.2(13)T.
12.0(27)S
This command was modified. The output of the show ip bgp vpnv4 all labels command was enhanced to display explicit-null label information.
12.3
This command was modified. The rib-failure keyword was added for VRFs.
12.2(22)S
This command was modified. The output of the show ip bgp vpnv4 vrf vrf-name labels command was modified so that directly connected VRF networks no longer display as aggregate; no label appears instead.
12.2(25)S
This command was updated to display MPLS VPN nonstop forwarding information.
12.2(28)SB
This command was integrated into Cisco IOS Release 12.2(28)SB and implemented on the Cisco 10000 series router. The display output was modified to indicate whether BGP nonstop routing (NSR) with stateful switchover (SSO) is enabled and the reason the last BGP lost SSO capability.
12.2(33)SRA
This command was modified. The output was modified to support per-VRF assignment of the BGP router ID.
12.2(31)SB2
This command was modified. The output was modified to support per-VRF assignment of the BGP router ID.
12.2(33)SXH
This command was modified. The output was modified to support per-VRF assignment of the BGP router ID.
Note In Cisco IOS Release 12.2(33)SXH, the command output does not display on the standby Route Processor in NSF/SSO mode.
12.4(20)T
This command was modified. The output was modified to support per-VRF assignment of the BGP router ID.
15.0(1)M
This command was modified. The output was modified to support the BGP Event-Based VPN Import feature.
12.2(33)SRE
This command was modified. The command output was modified to support the BGP Event-Based VPN Import, BGP best external, and BGP additional path features.
12.2(33)XNE
This command was integrated into Cisco IOS Release 12.2(33)XNE.
Cisco IOS XE Release 2.5
This command was integrated into Cisco IOS XE Release 2.5.
15.0(1)S
This command was integrated into Cisco IOS Release 15.0(1)S.
15.0(1)SY
This command was integrated into Cisco IOS Release 15.0(1)SY.
15.2(3)T
This command was integrated into Cisco IOS Release 15.2(3)T.
15.2(4)S
This command was implemented on the Cisco 7200 series router and the output was modified to display unknown attributes and discarded attributes associated with a prefix.
Cisco IOS XE Release 3.7S
This command was implemented on the Cisco ASR 903 router and the output modified to display unknown attributes and discarded attributes associated with a prefix.
15.2(2)SNG
This command was implemented on the Cisco ASR 901 Series Aggregation Services Routers.
Usage Guidelines
Use this command to display VPNv4 information from the BGP database. The show ip bgp vpnv4 all command displays all available VPNv4 information. The show ip bgp vpnv4 all summary command displays BGP neighbor status. The show ip bgp vpnv4 all labels command displays explicit-null label information.
Examples
The following example shows all available VPNv4 information in a BGP routing table:
Router# show ip bgp vpnv4 all BGP table version is 18, local router ID is 10.14.14.14 Status codes: s suppressed, d damped, h history, * valid, > best, i - internal Origin codes: i - IGP, e - EGP,? - incomplete Network Next Hop Metric LocPrf Weight Path Route Distinguisher: 1:101 (default for vrf vpn1) *>i10.6.6.6/32 10.0.0.21 11 100 0 ? *> 10.7.7.7/32 10.150.0.2 11 32768 ? *>i10.69.0.0/30 10.0.0.21 0 100 0 ? *> 10.150.0.0/24 0.0.0.0 0 32768 ?The table below describes the significant fields shown in the display.
Table 40 show ip bgp vpnv4 all Field Descriptions Field
Description
Network
Displays the network address from the BGP table.
Next Hop
Displays the address of the BGP next hop.
Metric
Displays the BGP metric.
LocPrf
Displays the local preference.
Weight
Displays the BGP weight.
Path
Displays the BGP path per route.
The following example shows how to display a table of labels for NLRI prefixes that have a route distinguisher value of 100:1.
Router# show ip bgp vpnv4 rd 100:1 labels Network Next Hop In label/Out label Route Distinguisher: 100:1 (vrf1) 10.0.0.0 10.20.0.60 34/nolabel 10.0.0.0 10.20.0.60 35/nolabel 10.0.0.0 10.20.0.60 26/nolabel 10.20.0.60 26/nolabel 10.0.0.0 10.15.0.15 nolabel/26The table below describes the significant fields shown in the display.
Table 41 show ip bgp vpnv4 rd labels Field Descriptions Field
Description
Network
Displays the network address from the BGP table.
Next Hop
Specifies the BGP next hop address.
In label
Displays the label (if any) assigned by this router.
Out label
Displays the label assigned by the BGP next-hop router.
The following example shows VPNv4 routing entries for the VRF named vpn1:
Router# show ip bgp vpnv4 vrf vpn1 BGP table version is 18, local router ID is 10.14.14.14 Status codes: s suppressed, d damped, h history, * valid, > best, i - internal, r RIB-failure, S Stale, m multipath, b backup-path, x best-external Origin codes: i - IGP, e - EGP, ? - incomplete Network Next Hop Metric LocPrf Weight Path Route Distinguisher: 100:1 (default for vrf test1) *> 10.1.1.1/32 192.168.1.1 0 0 100 i *bi 10.4.4.4 0 100 0 100 i *> 10.2.2.2/32 192.168.1.1 0 100 i *bi 10.4.4.4 0 100 0 100 i *> 172.16.1.0/24 192.168.1.1 0 0 100 i * i 10.4.4.4 0 100 0 100 i r> 192.168.1.0 192.168.1.1 0 0 100 i rbi 10.4.4.4 0 100 0 100 i *> 192.168.3.0 192.168.1.1 0 100 i *bi 10.4.4.4 0 100 0 100 iThe table below describes the significant fields shown in the display.
Table 42 show ip bgp vpnv4 vrf Field Descriptions Field
Description
Network
Displays the network address from the BGP table.
Next Hop
Displays the address of the BGP next hop.
Metric
Displays the BGP metric.
LocPrf
Displays the local preference.
Weight
Displays the BGP weight.
Path
Displays the BGP path per route.
The following example shows attributes for network 192.168.9.0 that include multipaths, best path, and a recursive-via-host flag:
Router# show ip bgp vpnv4 vrf vpn1 192.168.9.0 255.255.255.0 BGP routing table entry for 100:1:192.168.9.0/24, version 44 Paths: (2 available, best #2, table test1) Additional-path Advertised to update-groups: 2 100, imported path from 400:1:192.168.9.0/24 10.8.8.8 (metric 20) from 10.5.5.5 (10.5.5.5) Origin IGP, metric 0, localpref 100, valid, internal, backup/repair Extended Community: RT:100:1 RT:200:1 RT:300:1 RT:400:1 Originator: 10.8.8.8, Cluster list: 10.5.5.5 , recursive-via-host mpls labels in/out nolabel/17 100, imported path from 300:1:192.168.9.0/24 10.7.7.7 (metric 20) from 10.5.5.5 (10.5.5.5) Origin IGP, metric 0, localpref 100, valid, internal, best Extended Community: RT:100:1 RT:200:1 RT:300:1 RT:400:1 Originator: 10.7.7.7, Cluster list: 10.5.5.5 , recursive-via-host mpls labels in/out nolabel/17The table below describes the significant fields shown in the display.
Table 43 show ip bgp vpnv4 all network-address Field Descriptions Field
Description
BGP routing table entry for ... version
Internal version number of the table. This number is incremented whenever the table changes.
Paths
Number of autonomous system paths to the specified network. If multiple paths exist, one of the multipaths is designated the best path.
Multipath
Indicates the maximum paths configured (iBGP or eBGP).
Advertised to non peer-group peers
IP address of the BGP peers to which the specified route is advertised.
10.22.7.8 (metric 11) from 10.11.3.4 (10.0.0.8)
Indicates the next hop address and the address of the gateway that sent the update.
Origin
- IGP—Entry originated from Interior Gateway Protocol (IGP) and was advertised with a network router configuration command.
- incomplete—Entry originated from other than an IGP or Exterior Gateway Protocol (EGP) and was advertised with the redistribute router configuration command.
- EGP—Entry originated from an EGP.
metric
If shown, the value of the interautonomous system metric.
localpref
Local preference value as set with the set local-preference route-map configuration command. The default value is 100.
valid
Indicates that the route is usable and has a valid set of attributes.
internal/external
The field is internal if the path is learned via iBGP. The field is external if the path is learned via eBGP.
multipath
One of multiple paths to the specified network.
best
If multiple paths exist, one of the multipaths is designated the best path and this path is advertised to neighbors.
Extended Community
Route Target value associated with the specified route.
Originator
The router ID of the router from which the route originated when route reflector is used.
Cluster list
The router ID of all the route reflectors that the specified route has passed through.
The following example shows routes that BGP could not install in the VRF table:
Router# show ip bgp vpnv4 vrf xyz rib-failure Network Next Hop RIB-failure RIB-NH Matches Route Distinguisher: 2:2 (default for vrf bar) 10.1.1.2/32 10.100.100.100 Higher admin distance No 10.111.111.112/32 10.9.9.9 Higher admin distance YesThe table below describes the significant fields shown in the display.
Table 44 show ip bgp vpnv4 vrf rib-failure Field Descriptions Field
Description
Network
IP address of a network entity.
Next Hop
IP address of the next system that is used when forwarding a packet to the destination network. An entry of 0.0.0.0 indicates that the router has some non-BGP routes to this network.
RIB-failure
Cause of the Routing Information Base (RIB) failure. Higher admin distance means that a route with a better (lower) administrative distance, such as a static route, already exists in the IP routing table.
RIB-NH Matches
Route status that applies only when Higher admin distance appears in the RIB-failure column and the bgp suppress-inactive command is configured for the address family being used. There are three choices:
- Yes—Means that the route in the RIB has the same next hop as the BGP route or that the next hop recurses down to the same adjacency as the BGP next hop.
- No—Means that the next hop in the RIB recurses down differently from the next hop of the BGP route.
- n/a—Means that the bgp suppress-inactive command is not configured for the address family being used.
The following example shows the information displayed on the active and standby Route Processors when they are configured for NSF/SSO: MPLS VPN.
NoteIn Cisco IOS Release 12.2(33)SXH, the Cisco IOS Software Modularity: MPLS Layer 3 VPNs feature incurred various infrastructure changes. The result of those changes affects the output of this command on the standby Route Processor (RP). In Cisco IOS Release 12.2(33)SXH, the standby RP does not display any output from the show ip bgp vpnv4 command.
Router# show ip bgp vpnv4 all labels Network Next Hop In label/Out label Route Distinguisher: 100:1 (vpn1) 10.12.12.12/32 0.0.0.0 16/aggregate(vpn1) 10.0.0.0/8 0.0.0.0 17/aggregate(vpn1) Route Distinguisher: 609:1 (vpn0) 10.13.13.13/32 0.0.0.0 18/aggregate(vpn0) Router# show ip bgp vpnv4 vrf vpn1 labels Network Next Hop In label/Out label Route Distinguisher: 100:1 (vpn1) 10.12.12.12/32 0.0.0.0 16/aggregate(vpn1) 10.0.0.0/8 0.0.0.0 17/aggregate(vpn1)Router# show ip bgp vpnv4 all labels Network Masklen In label Route Distinguisher: 100:1 10.12.12.12 /32 16 10.0.0.0 /8 17 Route Distinguisher: 609:1 10.13.13.13 /32 18 Router# show ip bgp vpnv4 vrf vpn1 labels Network Masklen In label Route Distinguisher: 100:1 10.12.12.12 /32 16 10.0.0.0 /8 17The table below describes the significant fields shown in the display.
Table 45 show ip bgp vpnv4 labels Field Descriptions Field
Description
Network
The network address from the BGP table.
Next Hop
The BGP next-hop address.
In label
The label (if any) assigned by this router.
Out label
The label assigned by the BGP next-hop router.
Masklen
The mask length of the network address.
The following example displays output, including the explicit-null label, from the show ip bgp vpnv4 all labels command on a CSC-PE router:
Router# show ip bgp vpnv4 all labels Network Next Hop In label/Out label Route Distinguisher: 100:1 (v1) 10.0.0.0/24 10.0.0.0 19/aggregate(v1) 10.0.0.1/32 10.0.0.0 20/nolabel 10.1.1.1/32 10.0.0.0 21/aggregate(v1) 10.10.10.10/32 10.0.0.1 25/exp-null 10.168.100.100/32 10.0.0.1 23/exp-null 10.168.101.101/32 10.0.0.1 22/exp-nullThe table below describes the significant fields shown in the display.
Table 46 show ip bgp vpnv4 all labels Field Descriptions Field
Description
Network
Displays the network address from the BGP table.
Next Hop
Displays the address of the BGP next hop.
In label
Displays the label (if any) assigned by this router.
Out label
Displays the label assigned by the BGP next-hop router.
Route Distinguisher
Displays an 8-byte value added to an IPv4 prefix to create a VPN IPv4 prefix.
The following example displays separate router IDs for each VRF in the output from an image in Cisco IOS Release 12.2(31)SB2, 12.2(33)SRA, 12.2(33)SXH, 12.4(20)T, Cisco IOS XE Release 2.1, and later releases with the Per-VRF Assignment of BGP Router ID feature configured. The router ID is shown next to the VRF name.
Router# show ip bgp vpnv4 all BGP table version is 5, local router ID is 172.17.1.99 Status codes: s suppressed, d damped, h history, * valid, > best, i - internal, r RIB-failure, S Stale Origin codes: i - IGP, e - EGP, ? - incomplete Network Next Hop Metric LocPrf Weight Path Route Distinguisher: 1:1 (default for vrf vrf_trans) VRF Router ID 10.99.1.2 *> 192.168.4.0 0.0.0.0 0 32768 ? Route Distinguisher: 42:1 (default for vrf vrf_user) VRF Router ID 10.99.1.1 *> 192.168.5.0 0.0.0.0 0 32768 ?The table below describes the significant fields shown in the display.
Table 47 show ip bgp vpnv4 all (VRF Router ID) Field Descriptions Field
Description
Route Distinguisher
Displays an 8-byte value added to an IPv4 prefix to create a VPN IPv4 prefix.
vrf
Name of the VRF.
VRF Router ID
Router ID for the VRF.
In the following example, the BGP Event-Based VPN Import feature is configured in Cisco IOS Release 15.0(1)M, 12.2(33)SRE, and later releases. When the import path selection command is configured, but the strict keyword is not included, then a safe import path selection policy is in effect. When a path is imported as the best available path (when the best path or multipaths are not eligible for import), the imported path includes the wording “imported safety path,” as shown in the output.
Router# show ip bgp vpnv4 all 172.17.0.0 BGP routing table entry for 45000:1:172.17.0.0/16, version 10 Paths: (1 available, best #1, table vrf-A) Flag: 0x820 Not advertised to any peer 2, imported safety path from 50000:2:172.17.0.0/16 10.0.101.1 from 10.0.101.1 (10.0.101.1) Origin IGP, metric 200, localpref 100, valid, internal, best Extended Community: RT:45000:100In the following example, BGP Event-Based VPN Import feature configuration information is shown for Cisco IOS Release 15.0(1)M, 12.2(33)SRE, and later releases. When the import path selection command is configured with the all keyword, any path that matches an RD of the specified VRF will be imported, even though the path does not match the Route Targets (RT) imported by the specified VRF. In this situation, the imported path is marked as “not-in-vrf” as shown in the output. Note that on the net for vrf-A, this path is not the best path because any paths that are not in the VRFs appear less attractive than paths in the VRF.
Router# show ip bgp vpnv4 all 172.17.0.0 BBGP routing table entry for 45000:1:172.17.0.0/16, version 11 Paths: (2 available, best #2, table vrf-A) Flag: 0x820 Not advertised to any peer 2 10.0.101.2 from 10.0.101.2 (10.0.101.2) Origin IGP, metric 100, localpref 100, valid, internal, not-in-vrf Extended Community: RT:45000:200 mpls labels in/out nolabel/16 2 10.0.101.1 from 10.0.101.1 (10.0.101.1) Origin IGP, metric 50, localpref 100, valid, internal, best Extended Community: RT:45000:100 mpls labels in/out nolabel/16In the following example, the unknown attributes and discarded attributes associated with the prefix are displayed.
Device# show ip bgp vpnv4 all 10.0.0.0/8 BGP routing table entry for 100:200:10.0.0.0/8, version 0 Paths: (1 available, no best path) Not advertised to any peer Refresh Epoch 1 Local 10.0.103.1 from 10.0.103.1 (10.0.103.1) Origin IGP, localpref 100, valid, internal Extended Community: RT:1:100 Connector Attribute: count=1 type 1 len 12 value 22:22:10.0.101.22 mpls labels in/out nolabel/16 unknown transitive attribute: flag E0 type 129 length 32 value 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 unknown transitive attribute: flag E0 type 140 length 32 value 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 unknown transitive attribute: flag E0 type 120 length 32 value 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 discarded unknown attribute: flag C0 type 128 length 32 value 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000The following example is based on the BGP—VPN Distinguisher Attribute feature. The output displays an Extended Community attribute, which is the VPN distinguisher (VD) of 104:1.
Device# show ip bgp vpnv4 unicast all 1.4.1.0/24 BGP routing table entry for 104:1:1.4.1.0/24, version 28 Paths: (1 available, best #1, no table) Advertised to update-groups: 1 Refresh Epoch 1 1001 19.0.101.1 from 19.0.101.1 (19.0.101.1) Origin IGP, localpref 100, valid, external, best Extended Community: VD:104:1 mpls labels in/out nolabel/16 rx pathid: 0, tx pathid: 0x0The following example includes “allow-policy” in the output, indicating that the BGP—Support for iBGP Local-AS feature was configured for the specified neighbor by configuring the neighbor allow-policy command.
Device# show ip bgp vpnv4 all neighbors 192.168.3.3 policy Neighbor: 192.168.3.3, Address-Family: VPNv4 Unicast Locally configured policies: route-map pe33 out route-reflector-client allow-policy send-community bothRelated Commands
Command
Description
import path limit
Specifies the maximum number of BGP paths, per VRF importing net, that can be imported from an exporting net.
import path selection
Specifies the BGP import path selection policy for a specific VRF instance.
neighbor allow-policy
Allows iBGP policies to be configured for the specified neighbor.
set extcommunity vpn-distinguisher
Sets a VPN distinguisher attribute to routes that pass a route map.
show ip vrf
Displays the set of defined VRFs and associated interfaces.
show ip bgp vpnv4 all dampening
To display BGP dampening information for the Virtual Private Network Version 4 (VPNv4) address family, use the show ip bgp vpnv4 all dampening command in user EXEC or privileged EXEC mode.
show ip bgp vpnv4 all dampening {dampened-paths | flap-statistics [network-address [mask | bestpath | multipaths] | ip-prefix / length| cidr-only | filter-list filter-list| oer-paths| prefix-list prefix-list| quote-regexp regexp | regexp regexp | route-map map-name| version {number | recent }] | parameters}
Syntax Description
dampened-paths
Display routes suppressed due to dampening.
flap-statistics
Displays flap statistics of routes.
network-address
(Optional) Used with the flap-statistics keyword, network in the BGP routing table to display.
mask
(Optional) Used with the network-address argument, network mask that determines the networks displayed.
bestpath
(Optional) Used with the network-address argument, displays the bestpath for this prefix.
multipaths
(Optional) Used with the network-address argument, displays the multipaths for this prefix.
ip-prefix/length
(Optional) Used with the flap-statistics keyword, IP prefix/network length, such as 10.0.0.0/8.
cidr-only
(Optional) Used with the flap-statistics keyword, displays only routes with non-natural netmasks.
filter-list filter-list
(Optional) Used with the flap-statistics keyword, displays routes that conform to the specified filter list in the range 1-500.
oer-paths
(Optional) Used with the flap-statistics keyword, displays all OER controlled paths.
prefix-list prefix-list
(Optional) Used with the flap-statistics keyword, displays routes allowed by the prefix list.
quote-regexp regexp
(Optional) Used with the flap-statistics keyword, displays routes matching the AS path “regular expression”.
regexp regexp
(Optional) Used with the flap-statistics keyword, displays routes matching the AS path regular expression.
route-map map-name
(Optional) Used with the flap-statistics keyword, displays routes allowed by the route map.
version number
(Optional) Used with the flap-statistics keyword, displays version of BGP table.
recent
(Optional) Used with the flap-statistics keyword, displays recent version of BGP table.
parameters
Display details of configured dampening parameters.
Examples
The following example shows dampening flap-statistics for the VPNv4 address family:
Router# show ip bgp vpnv4 all dampening flap-statistics For_address_family: VPNv4 Unicast % dampening not enabled for base For vrf: Cust_A BGP table version is 15, local router ID is 144.124.23.2 Status codes: s suppressed, d damped, h history, * valid, > best, i - internal, r RIB-failure, S Stale, m multipath, b backup-path, x best-external, f RT-Filter Origin codes: i - IGP, e - EGP, ? - incomplete Network From Flaps Duration Reuse Path *> 20.20.20.20/32 172.16.1.2 1 00:01:05 65001 For vrf: Cust_B *d 11.11.11.11/32 192.168.1.2 3 00:04:22 00:04:49 65001 Router#show ip bgp vpnv4 all sso summary
To display information about Border Gateway Protocol (BGP) peers that support BGP nonstop routing (NSR) with stateful switchover (SSO), use the show ip bgp vpn4 sso summary command in privileged EXEC mode.
Usage Guidelines
The show ip bgp vpnv4 all sso summary command is used to display the number of BGP neighbors that are in SSO mode.
show ip bgp vpnv6 unicast all dampening
To display BGP dampening information for the Virtual Private Network Version 6 (VPNv6) address family, use the show ip bgp vpnv6 unicast all dampeningcommand in user EXEC or privileged EXEC mode.
show ip bgp vpnv6 unicast all dampening {dampened-paths| flap-statistics[network / length | filter-list filter-list| injected-paths| prefix-list prefix-list| quote-regexp regexp | regexp regexp | route-map map-name] | parameters}
Syntax Description
dampened-paths
Display routes suppressed due to dampening.
flap-statistics
Displays flap statistics of routes.
network / length
(Optional) Used with the flap-statistics keyword, IPv6 prefix network/length in the format X:X:X:X::X / <0-128>.
filter-list filter-list
(Optional) Used with the flap-statistics keyword, displays routes that conform to the specified filter list in the range 1-500.
injected-paths
(Optional) Used with the flap-statistics keyword, displays all injected paths.
prefix-list list
(Optional) Used with the flap-statistics keyword, displays routes allowed by the prefix list.
quote-regexp regexp
(Optional) Used with the flap-statistics keyword, displays routes matching the AS path “regular expression”.
regexp regexp
(Optional) Used with the flap-statistics keyword, displays routes matching the AS path regular expression.
route-map map-name
(Optional) Used with the flap-statistics keyword, displays routes allowed by the route map.
parameters
Display details of configured dampening parameters.
Usage Guidelines
Use this command to display BGP dampening information for the VPNv6 address family.
Examples
The following example shows dampening VPNv6 information:
Router# show ip bgp vpnv6 unicast all dampening flap-statistics For_address_family: VPNv6 Unicast % dampening not enabled for base For vrf: RED For vrf: BLUE BGP table version is 36, local router ID is 10.0.0.1 Status codes: s suppressed, d damped, h history, * valid, > best, i - internal, r RIB-failure, S Stale, m multipath, b backup-path, x best-external, f RT-Filter Origin codes: i - IGP, e - EGP, ? - incomplete Network From Flaps Duration Reuse Path *d 11::/64 20::2 3 00:03:17 00:05:59 2 *d 22::/64 20::2 3 00:03:17 00:05:59 2 *d 33::/64 20::2 3 00:03:17 00:05:59 2 *d 44::/64 20::2 3 00:03:17 00:05:59 2 *d 55::/64 20::2 3 00:03:17 00:05:59 2 R1#show ip community-list
To display co nfigured community lists, use the show ip community-list command in user or privileged EXEC mode.
Command History
Release
Modification
11.0
This command was introduced.
12.0(10)S
Named community list support was added.
12.0(16)ST
Named community lists support was integrated into Cisco IOS Release 12.0(16)ST.
12.1(9)E
Named community lists support was integrated into Cisco IOS Release 12.1(9)E.
12.2(8)T
Named community lists support was integrated into Cisco IOS Release 12.2(8)T.
12.2(14)S
This command was integrated into Cisco IOS Release 12.2(14)S.
12.2(33)SRA
This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2SX
This command is supported in the Cisco IOS Release 12.2SX train. Support in a specific 12.2SX release of this train depends on your feature set, platform, and platform hardware.
Usage Guidelines
This command can be used without any arguments or keywords. If no arguments are specified, this command will display all community lists. However, the community list name or number can be specified when entering the show ip community-list command. This option can be useful for filtering the output of this command and verifying a single named or numbered community list.
Examples
The following sample output is similar to the output that will be displayed when the show ip community-listcommand is entered in privileged EXEC mode:
Router# show ip community-list Community standard list 1 permit 3 deny 5 Community (expanded) access list 101 deny 4 permit 6 Named Community standard list COMMUNITY_LIST_NAME permit 1 deny 7 Named Community expanded list COMMUNITY_LIST_NAME_TWO deny 2 permit 8The Field Descriptions table below describes the significant fields shown in the display.
Table 49 show ip community-list Field Descriptions Field
Description
Community standard list
If shown, this value will display a standard community list number (1 to 99). The standard community list number will immediately follow this value.
Community (expanded) access list
If shown, this value will display an expanded community list number (100 to 500). The expanded community list number will immediately follow this value.
Named community standard list
If shown, this value will display a standard community list name. The standard community list name will immediately follow this value.
Named community expanded list
If shown, this value will display an expanded community list name. The expanded community list name will immediately follow this value.
show ip extcommunity-list
To display routes that are permitted by an extended community list, use the show ip extcommunity-list command in user EXEC or privileged EXEC mode.
Syntax Description
list-number
(Optional) Specifies an extended community list number from 1 to 500. A standard extended community list number is from 1 to 99. An expanded extended list is from 100 to 500.
list-name
(Optional) Specifies an extended community list name. If a specific extended community list number is not specified, all locally configured extended community lists will be displayed by default.
Command History
Release
Modification
12.1
This command was introduced.
12.2(25)S
Support for named extended community lists was added. Minor formatting changes were made to the output.
12.3(11)T
Support for named extended community lists was added. Minor formatting changes were made to the output.
12.2(27)SBC
This command was integrated into the Cisco IOS Release 12.2(27)SBC.
12.2(33)SRA
This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2(33)SXH
This command was integrated into Cisco IOS Release 12.2(33)SXH.
12.0(32)S12
This command was modified. Support for displaying 4-byte autonomous system numbers in asdot notation only was added.
12.0(32)SY8
This command was modified. Support for displaying 4-byte autonomous system numbers in asplain and asdot notation was added.
12.4(24)T
This command was modified. Support for displaying 4-byte autonomous system numbers in asdot notation only was added.
Cisco IOS XE Release 2.3
This command was modified. Support for displaying 4-byte autonomous system numbers in asdot notation only was added.
12.2(33)SXI1
This command was modified. Support for 4-byte autonomous system numbers in asplain and asdot notation was added.
12.0(33)S3
This command was modified. Support for displaying 4-byte autonomous system numbers in asplain notation was added and the default display format is now asplain.
Cisco IOS XE Release 2.4
This command was modified. Support for displaying 4-byte autonomous system numbers in asplain notation was added and the default display format is now asplain.
12.2(33)SRE
This command was modified. Support for displaying 4-byte autonomous system numbers in asplain and asdot notation was added.
12.2(33)XNE
This command was modified. Support for displaying 4-byte autonomous system numbers in asplain and asdot notation was added.
15.1(1)SG
This command was modified. Support for displaying 4-byte autonomous system numbers in asplain and asdot notation was added.
Cisco IOS XE Release 3.3SG
This command was modified. Support for displaying 4-byte autonomous system numbers in asplain and asdot notation was added.
15.2(1)E
This command was integrated into Cisco IOS Release 15.2(1)E.
Usage Guidelines
In Cisco IOS Release 12.0(32)SY8, 12.0(33)S3, 12.2(33)SRE, 12.2(33)XNE, 12.2(33)SXI1, Cisco IOS XE Release 2.4, and later releases, the Cisco implementation of 4-byte autonomous system numbers uses asplain--65538 for example--as the default regular expression match and output display format for autonomous system numbers, but you can configure 4-byte autonomous system numbers in both the asplain format and the asdot format as described in RFC 5396. To change the default regular expression match and output display of 4-byte autonomous system numbers to asdot format, use the bgp asnotation dot command followed by the clear ip bgp * command to perform a hard reset of all current BGP sessions.
In Cisco IOS Release 12.0(32)S12, 12.4(24)T, and Cisco IOS XE Release 2.3, the Cisco implementation of 4-byte autonomous system numbers uses asdot--1.2 for example--as the only configuration format, regular expression match, and output display, with no asplain support.
If the route target--RT in the output--contains a 4-byte autonomous system number as part of the extended community list, it will be displayed in the appropriate format.
Examples
The following is sample output from the show ip extcommunity-listcommand:
Router# show ip extcommunity-list Standard extended community-list 1 10 permit RT:64512:10 20 permit SoO:65400:20 30 deny RT:65424:30 SoO:64524:40 Standard extended community-list 99 10 permit RT:65504:40 SoO:65505:50 20 deny RT:65406:60 SoO:65307:70 Expanded extended community-list LIST_NAME 10 permit 0-9* A-Z* a-z*The table below describes the significant fields shown in the display.
Table 50 show ip extcommunity-list Field Descriptions Field
Description
... extended community-list....
The type of extended community-list (standard or expanded), and the name or number of the extended community list.
10
The sequence number of the extended community list entry. 10 is the lowest default sequence number. Extended community lists increment by 10 when default values are configured.
permit/deny
Indicates a permit or deny sequence entry.
RT/SoO
Indicates the route target or the site of origin used in a standard extended community list.
0-9* A-Z* a-z*
Regular expression used in an expanded extended community list.
The following output is from the show ip extcommunity-listcommand after a 4-byte autonomous system number has been configured as part of the route target. The 4-byte autonomous system number, 65537, is displayed in the default asplain format. This example requires Cisco IOS Release 12.0(32)SY8, 12.0(33)S3, 12.2(33)SRE, 12.2(33)XNE, 12.2(33)SXI1, Cisco IOS XE Release 2.4, or a later release.
Router# show ip extcommunity-list 1 Extended community standard list 1 permit RT:65537:100The following output displays a 4-byte autonomous system number that has been configured as part of the route target. The 4-byte autonomous system number--1.1--is displayed in asdot notation. The dot notation is the only format for 4-byte autonomous system numbers in Cisco IOS Release 12.0(32)S12, 12.4(24)T, or Cisco IOS XE Release 2.3. This output can also be seen in Cisco IOS Release 12.0(32)SY8, 12.0(33)S3, 12.2(33)SRE, 12.2(33)XNE, 12.2(33)SXI1, Cisco IOS XE Release 2.4, or later releases. after the bgp asnotation dot command has been entered to display 4-byte autonomous system numbers in dot notation.
Router# show ip extcommunity-list 1 Extended community standard list 1 permit RT:1.1:100show ip policy-list
To display information about a configured policy list and policy list entries, use the show ip policy-list command in EXEC mode.
Examples
The following is sample output from the show ip policy-list command. The output of this command will display the policy-list name and configured match clauses. The following sample output is similar to the output that will be displayed:
Router> show ip policy-list policy-list POLICY-LIST-NAME-1 permit Match clauses: metric 20 policy-list POLICY-LIST-NAME-2 permit Match clauses: as-path (as-path filter): 1show ip prefix-list
To display information about a prefix list or prefix list entries, use the show ip prefix-list command in user EXEC or privileged EXEC mode.
show ip prefix-list [ detail | summary ] { prefix-list-name [ seq sequence-number | network/length [ longer | first-match ] ] }
Syntax Description
detail | summary
(Optional) Displays detailed or summarized information about all prefix lists.
prefix-list-name
(Optional) Displays the entries in a specific prefix list.
seq sequence-number
(Optional) Displays only the prefix list entry with the specified sequence number in the specified prefix-list.
network / length
(Optional) Displays all entries in the specified prefix list that use this network address and netmask length (in bits).
longer
(Optional) Displays all entries of the specified prefix list that match or are more specific than the given network/length.
first-match
(Optional)Displays the first entry of the specified prefix list that matches the given network / length.
Command History
Release
Modification
12.0
This command was introduced.
12.2(33)SRA
This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2SX
This command was integrated into Cisco IOS Release 12.2SX train. Support in a specific 12.2SX release of this train depends on your feature set, platform, and platform hardware.
Examples
The following example shows the output of the show ip prefix-list command with details about the prefix list named test:
Router# show ip prefix-list detail test ip prefix-list test: Description: test-list count: 1, range entries: 0, sequences: 10 - 10, refcount: 3 seq 10 permit 10.0.0.0/8 (hit count: 0, refcount: 1)Related Commands
Command
Description
clear ip prefix-list
Resets the hit count of the prefix list entries.
distribute-list in (BGP)
Filters networks received in updates.
distribute-list out (BGP)
Suppresses networks from being advertised in updates.
ip prefix-list
Creates an entry in a prefix list.
ip prefix-list description
Adds a text description of a prefix list.
match ip address
Distributes any routes that have a destination network number address that is permitted by a standard or extended access list, and performs policy routing on packets.
neighbor prefix-list
Distributes BGP neighbor information as specified in a prefix list.
show ip route
To display contents of the routing table, use the show ip route command in user EXEC or privileged EXEC mode.
show ip route [ ip-address [ repair-paths | next-hop-override [dhcp] | mask [longer-prefixes] ] | protocol [process-id] | list [ access-list-number | access-list-name ] | static download | update-queue ]
Syntax Description
ip-address
(Optional) IP address for which routing information should be displayed.
repair-paths
(Optional) Displays the repair paths.
next-hop-override
(Optional) Displays the Next Hop Resolution Protocol (NHRP) next-hop overrides that are associated with a particular route and the corresponding default next hops.
dhcp
(Optional) Displays routes added by the Dynamic Host Configuration Protocol (DHCP) server.
mask
(Optional) Subnet mask.
longer-prefixes
(Optional) Displays output for longer prefix entries.
protocol
(Optional) The name of a routing protocol or the keyword connected, mobile, static, or summary. If you specify a routing protocol, use one of the following keywords: bgp, eigrp, hello, isis, odr, ospf, nhrp, or rip.
process-id
(Optional) Number used to identify a process of the specified protocol.
list
(Optional) Filters output by an access list name or number.
access-list-number
(Optional) Access list number.
access-list-name
(Optional) Access list name.
static
(Optional) Displays static routes.
download
(Optional) Displays routes installed using the authentication, authorization, and accounting (AAA) route download function. This keyword is used only when AAA is configured.
update-queue
(Optional) Displays Routing Information Base (RIB) queue updates.
Command History
Release
Modification
9.2
This command was introduced.
10.0
This command was modified. The “D—EIGRP, EX—EIGRP, N1—SPF NSSA external type 1 route” and “N2—OSPF NSSA external type 2 route” codes were included in the command output.
10.3
This command was modified. The process-id argument was added.
11.0
This command was modified. The longer-prefixes keyword was added.
11.1
This command was modified. The “U—per-user static route” code was included in the command output.
11.2
This command was modified. The “o—on-demand routing” code was included in the command output.
12.2(33)SRA
This command was integrated into Cisco IOS Release 12.2(33)SRA, and the update-queue keyword was added.
11.3
This command was modified. The command output was enhanced to display the origin of an IP route in Intermediate System-to-Intermediate System (IS-IS) networks.
12.0(1)T
This command was modified. The “M—mobile” code was included in the command output.
12.0(3)T
This command was modified. The “P—periodic downloaded static route” code was included in the command output.
12.0(4)T
This command was modified. The “ia—IS-IS” code was included in the command output.
12.2(2)T
This command was modified. The command output was enhanced to display information on multipaths to the specified network.
12.2(13)T
This command was modified. The egp and igrp arguments were removed because the Exterior Gateway Protocol (EGP) and the Interior Gateway Routing Protocol (IGRP) were no longer available in Cisco software.
12.2(14)S
This command was integrated into Cisco IOS Release 12.2(14)S.
12.2(14)SX
This command was integrated into Cisco IOS Release 12.2(14)SX.
12.3(2)T
This command was modified. The command output was enhanced to display route tag information.
12.3(8)T
This command was modified. The command output was enhanced to display static routes using DHCP.
12.2(27)SBC
This command was integrated into Cisco IOS Release 12.2(27)SBC.
12.2(33)SRE
This command was modified. The dhcp and repair-paths keywords were added.
12.2(33)XNE
This command was integrated into Cisco IOS Release 12.2(33)XNE.
Cisco IOS XE Release 2.5
This command was integrated into Cisco IOS XE Release 2.5. The next-hop-override and nhrp keywords were added.
15.2(2)S
This command was modified. The command output was enhanced to display route tag values in dotted decimal format.
Cisco IOS XE Release 3.6S
This command was modified. The command output was enhanced to display route tag values in dotted decimal format.
15.2(4)S
This command was implemented on the Cisco 7200 series router.
15.1(1)SY
This command was integrated into Cisco IOS Release 15.1(1)SY.
Examples
The following is sample output from the show ip route command when an IP address is not specified:
Device# show ip route Codes: R - RIP derived, O - OSPF derived, C - connected, S - static, B - BGP derived, * - candidate default route, IA - OSPF inter area route, i - IS-IS derived, ia - IS-IS, U - per-user static route, o - on-demand routing, M - mobile, P - periodic downloaded static route, D - EIGRP, EX - EIGRP external, E1 - OSPF external type 1 route, E2 - OSPF external type 2 route, N1 - OSPF NSSA external type 1 route, N2 - OSPF NSSA external type 2 route Gateway of last resort is 10.119.254.240 to network 10.140.0.0 O E2 10.110.0.0 [160/5] via 10.119.254.6, 0:01:00, Ethernet2 E 10.67.10.0 [200/128] via 10.119.254.244, 0:02:22, Ethernet2 O E2 10.68.132.0 [160/5] via 10.119.254.6, 0:00:59, Ethernet2 O E2 10.130.0.0 [160/5] via 10.119.254.6, 0:00:59, Ethernet2 E 10.128.0.0 [200/128] via 10.119.254.244, 0:02:22, Ethernet2 E 10.129.0.0 [200/129] via 10.119.254.240, 0:02:22, Ethernet2 E 10.65.129.0 [200/128] via 10.119.254.244, 0:02:22, Ethernet2 E 10.10.0.0 [200/128] via 10.119.254.244, 0:02:22, Ethernet2 E 10.75.139.0 [200/129] via 10.119.254.240, 0:02:23, Ethernet2 E 10.16.208.0 [200/128] via 10.119.254.244, 0:02:22, Ethernet2 E 10.84.148.0 [200/129] via 10.119.254.240, 0:02:23, Ethernet2 E 10.31.223.0 [200/128] via 10.119.254.244, 0:02:22, Ethernet2 E 10.44.236.0 [200/129] via 10.119.254.240, 0:02:23, Ethernet2 E 10.141.0.0 [200/129] via 10.119.254.240, 0:02:22, Ethernet2 E 10.140.0.0 [200/129] via 10.119.254.240, 0:02:23, Ethernet2The following sample output from the show ip route command includes routes learned from IS-IS Level 2:
Device# show ip route Codes: R - RIP derived, O - OSPF derived, C - connected, S - static, B - BGP derived, * - candidate default route, IA - OSPF inter area route, i - IS-IS derived, ia - IS-IS, U - per-user static route, o - on-demand routing, M - mobile, P - periodic downloaded static route, D - EIGRP, EX - EIGRP external, E1 - OSPF external type 1 route, E2 - OSPF external type 2 route, N1 - OSPF NSSA external type 1 route, N2 - OSPF NSSA external type 2 route Gateway of last resort is not set 10.89.0.0 is subnetted (mask is 255.255.255.0), 3 subnets C 10.89.64.0 255.255.255.0 is possibly down, routing via 10.0.0.0, Ethernet0 i L2 10.89.67.0 [115/20] via 10.89.64.240, 0:00:12, Ethernet0 i L2 10.89.66.0 [115/20] via 10.89.64.240, 0:00:12, Ethernet0The following is sample output from the show ip route ip-address mask longer-prefixes command. When this keyword is included, the address-mask pair becomes the prefix, and any address that matches that prefix is displayed. Therefore, multiple addresses are displayed. The logical AND operation is performed on the source address 10.0.0.0 and the mask 10.0.0.0, resulting in 10.0.0.0. Each destination in the routing table is also logically ANDed with the mask and compared with 10.0.0.0. Any destinations that fall into that range are displayed in the output.
Device# show ip route 10.0.0.0 10.0.0.0 longer-prefixes Codes: R - RIP derived, O - OSPF derived, C - connected, S - static, B - BGP derived, * - candidate default route, IA - OSPF inter area route, i - IS-IS derived, ia - IS-IS, U - per-user static route, o - on-demand routing, M - mobile, P - periodic downloaded static route, D - EIGRP, EX - EIGRP external, E1 - OSPF external type 1 route, E2 - OSPF external type 2 route, N1 - OSPF NSSA external type 1 route, N2 - OSPF NSSA external type 2 route Gateway of last resort is not set S 10.134.0.0 is directly connected, Ethernet0 S 10.10.0.0 is directly connected, Ethernet0 S 10.129.0.0 is directly connected, Ethernet0 S 10.128.0.0 is directly connected, Ethernet0 S 10.49.246.0 is directly connected, Ethernet0 S 10.160.97.0 is directly connected, Ethernet0 S 10.153.88.0 is directly connected, Ethernet0 S 10.76.141.0 is directly connected, Ethernet0 S 10.75.138.0 is directly connected, Ethernet0 S 10.44.237.0 is directly connected, Ethernet0 S 10.31.222.0 is directly connected, Ethernet0 S 10.16.209.0 is directly connected, Ethernet0 S 10.145.0.0 is directly connected, Ethernet0 S 10.141.0.0 is directly connected, Ethernet0 S 10.138.0.0 is directly connected, Ethernet0 S 10.128.0.0 is directly connected, Ethernet0 10.19.0.0 255.255.255.0 is subnetted, 1 subnets C 10.19.64.0 is directly connected, Ethernet0 10.69.0.0 is variably subnetted, 2 subnets, 2 masks C 10.69.232.32 255.255.255.240 is directly connected, Ethernet0 S 10.69.0.0 255.255.0.0 is directly connected, Ethernet0The following sample outputs from the show ip route command display all downloaded static routes. A “p” indicates that these routes were installed using the AAA route download function.
Device# show ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, * - candidate default U - per-user static route, o - ODR, P - periodic downloaded static route T - traffic engineered route Gateway of last resort is 172.16.17.1 to network 10.0.0.0 172.31.0.0/32 is subnetted, 1 subnets P 172.31.229.41 is directly connected, Dialer1 10.0.0.0/8 is subnetted, 3 subnets P 10.1.1.0 [200/0] via 172.31.229.41, Dialer1 P 10.1.3.0 [200/0] via 172.31.229.41, Dialer1 P 10.1.2.0 [200/0] via 172.31.229.41, Dialer1 Device# show ip route static 172.16.4.0/8 is variably subnetted, 2 subnets, 2 masks P 172.16.1.1/32 is directly connected, BRI0 P 172.16.4.0/8 [1/0] via 10.1.1.1, BRI0 S 172.31.0.0/16 [1/0] via 172.16.114.65, Ethernet0 S 10.0.0.0/8 is directly connected, BRI0 P 10.0.0.0/8 is directly connected, BRI0 172.16.0.0/16 is variably subnetted, 5 subnets, 2 masks S 172.16.114.201/32 is directly connected, BRI0 S 172.16.114.205/32 is directly connected, BRI0 S 172.16.114.174/32 is directly connected, BRI0 S 172.16.114.12/32 is directly connected, BRI0 P 10.0.0.0/8 is directly connected, BRI0 P 10.1.0.0/16 is directly connected, BRI0 P 10.2.2.0/24 is directly connected, BRI0 S* 0.0.0.0/0 [1/0] via 172.16.114.65, Ethernet0 S 172.16.0.0/16 [1/0] via 172.16.114.65, Ethernet0The following sample output from the show ip route static download command displays all active and inactive routes installed using the AAA route download function:
Device# show ip route static download Connectivity: A - Active, I - Inactive A 10.10.0.0 255.0.0.0 BRI0 A 10.11.0.0 255.0.0.0 BRI0 A 10.12.0.0 255.0.0.0 BRI0 A 10.13.0.0 255.0.0.0 BRI0 I 10.20.0.0 255.0.0.0 172.21.1.1 I 10.22.0.0 255.0.0.0 Serial0 I 10.30.0.0 255.0.0.0 Serial0 I 10.31.0.0 255.0.0.0 Serial1 I 10.32.0.0 255.0.0.0 Serial1 A 10.34.0.0 255.0.0.0 192.168.1.1 A 10.36.1.1 255.255.255.255 BRI0 200 name remote1 I 10.38.1.9 255.255.255.0 192.168.69.1The following sample outputs from the show ip route nhrp command display shortcut switching on the tunnel interface:
Device# show ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route, H - NHRP Gateway of last resort is not set 10.0.0.0/16 is variably subnetted, 3 subnets, 2 masks C 10.1.1.0/24 is directly connected, Tunnel0 C 172.16.22.0 is directly connected, Ethernet1/0 H 172.16.99.0 [250/1] via 10.1.1.99, 00:11:43, Tunnel0 10.11.0.0/24 is subnetted, 1 subnets C 10.11.11.0 is directly connected, Ethernet0/0 Device# show ip route nhrp H 172.16.99.0 [250/1] via 10.1.1.99, 00:11:43, Tunnel0The following are sample outputs from the show ip route command when the next-hop-override keyword is used. When this keyword is included, the NHRP next-hop overrides that are associated with a particular route and the corresponding default next hops are displayed.
=============================================================== 1) Initial configuration =============================================================== Device# show ip route Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route, H - NHRP + - replicated route Gateway of last resort is not set 10.2.0.0/16 is variably subnetted, 2 subnets, 2 masks C 10.2.1.0/24 is directly connected, Loopback1 L 10.2.1.1/32 is directly connected, Loopback1 10.0.0.0/24 is subnetted, 1 subnets S 10.10.10.0 is directly connected, Tunnel0 10.11.0.0/24 is subnetted, 1 subnets S 10.11.11.0 is directly connected, Ethernet0/0 Device# show ip route next-hop-override Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route, H - NHRP + - replicated route Gateway of last resort is not set 10.2.0.0/16 is variably subnetted, 2 subnets, 2 masks C 10.2.1.0/24 is directly connected, Loopback1 L 10.2.1.1/32 is directly connected, Loopback1 10.0.0.0/24 is subnetted, 1 subnets S 10.10.10.0 is directly connected, Tunnel0 10.11.0.0/24 is subnetted, 1 subnets S 10.11.11.0 is directly connected, Ethernet0/0 Device# show ip cef Prefix Next Hop Interface . . . 10.2.1.255/32 receive Loopback1 10.10.10.0/24 attached Tunnel0 <<<<<<<< 10.11.11.0/24 attached Ethernet0/0 172.16.0.0/12 drop . . . =============================================================== 2) Add a next-hop override address = 10.10.10.0 mask = 255.255.255.0 gateway = 10.1.1.1 interface = Tunnel0 =============================================================== Device# show ip route Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route, H - NHRP + - replicated route Gateway of last resort is not set 10.2.0.0/16 is variably subnetted, 2 subnets, 2 masks C 10.2.1.0/24 is directly connected, Loopback1 L 10.2.1.1/32 is directly connected, Loopback1 10.0.0.0/24 is subnetted, 1 subnets S 10.10.10.0 is directly connected, Tunnel0 10.11.0.0/24 is subnetted, 1 subnets S 10.11.11.0 is directly connected, Ethernet0/0 Device# show ip route next-hop-override Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route, H - NHRP + - replicated route Gateway of last resort is not set 10.2.0.0/16 is variably subnetted, 2 subnets, 2 masks C 10.2.1.0/24 is directly connected, Loopback1 L 10.2.1.1/32 is directly connected, Loopback1 10.0.0.0/24 is subnetted, 1 subnets S 10.10.10.0 is directly connected, Tunnel0 [NHO][1/0] via 10.1.1.1, Tunnel0 10.11.0.0/24 is subnetted, 1 subnets S 10.11.11.0 is directly connected, Ethernet0/0 Device# show ip cef Prefix Next Hop Interface . . . 10.2.1.255/32 receive Loopback110.10.10.0/24 10.10.10.0/24 10.1.1.1 Tunnel0 10.11.11.0/24 attached Ethernet0/0 10.12.0.0/16 drop . . . =============================================================== 3) Delete a next-hop override address = 10.10.10.0 mask = 255.255.255.0 gateway = 10.11.1.1 interface = Tunnel0 =============================================================== Device# show ip route Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route, H - NHRP + - replicated route Gateway of last resort is not set 10.2.0.0/16 is variably subnetted, 2 subnets, 2 masks C 10.2.1.0/24 is directly connected, Loopback1 L 10.2.1.1/32 is directly connected, Loopback1 10.0.0.0/24 is subnetted, 1 subnets S 10.10.10.0 is directly connected, Tunnel0 10.11.0.0/24 is subnetted, 1 subnets S 10.11.11.0 is directly connected, Ethernet0/0 Device# show ip route next-hop-override Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route, H - NHRP + - replicated route Gateway of last resort is not set 10.2.0.0/16 is variably subnetted, 2 subnets, 2 masks C 10.2.1.0/24 is directly connected, Loopback1 L 10.2.1.1/32 is directly connected, Loopback1 10.0.0.0/24 is subnetted, 1 subnets S 10.10.10.0 is directly connected, Tunnel0 10.11.0.0/24 is subnetted, 1 subnets S 10.11.11.0 is directly connected, Ethernet0/0 Device# show ip cef Prefix Next Hop Interface . . . 10.2.1.255/32 receive Loopback110.10.10.0/24 10.10.10.0/24 attached Tunnel0 10.11.11.0/24 attached Ethernet0/0 10.120.0.0/16 drop . . .The table below describes the significant fields shown in the displays:
Table 51 show ip route Field Descriptions Field
Description
Codes (Protocol)
Indicates the protocol that derived the route. It can be one of the following values:
- B—BGP derived
- C—Connected
- D—Enhanced Interior Gateway Routing Protocol (EIGRP)
- EX—EIGRP external
- H—NHRP
- i—IS-IS derived
- ia—IS-IS
- L—Local
- M—Mobile
- o—On-demand routing
- O—Open Shortest Path First (OSPF) derived
- P—Periodic downloaded static route
- R—Routing Information Protocol (RIP) derived
- S—Static
- U—Per-user static route
- +—Replicated route
Codes (Type)
Type of route. It can be one of the following values:
- *—Indicates the last path used when a packet was forwarded. This information is specific to nonfast-switched packets.
- E1—OSPF external type 1 route
- E2—OSPF external type 2 route
- IA—OSPF interarea route
- L1—IS-IS Level 1 route
- L2—IS-IS Level 2 route
- N1—OSPF not-so-stubby area (NSSA) external type 1 route
- N2—OSPF NSSA external type 2 route
10.110.0.0
Indicates the address of the remote network.
[160/5]
The first number in brackets is the administrative distance of the information source; the second number is the metric for the route.
via 10.119.254.6
Specifies the address of the next device to the remote network.
0:01:00
Specifies the last time the route was updated (in hours:minutes:seconds).
Ethernet2
Specifies the interface through which the specified network can be reached.
Examples
The following is sample output from the show ip route command when an IP address is specified:
Device# show ip route 10.0.0.1 Routing entry for 10.0.0.1/32 Known via "isis", distance 115, metric 20, type level-1 Redistributing via isis Last update from 10.191.255.251 on Fddi1/0, 00:00:13 ago Routing Descriptor Blocks: * 10.22.22.2, from 10.191.255.247, via Serial2/3 Route metric is 20, traffic share count is 1 10.191.255.251, from 10.191.255.247, via Fddi1/0 Route metric is 20, traffic share count is 1When an IS-IS router advertises its link-state information, the router includes one of its IP addresses to be used as the originator IP address. When other routers calculate IP routes, they store the originator IP address with each route in the routing table.
The preceding example shows the output from the show ip route command for an IP route generated by IS-IS. Each path that is shown under the Routing Descriptor Blocks report displays two IP addresses. The first address (10.22.22.2) is the next-hop address. The second is the originator IP address from the advertising IS-IS router. This address helps you determine the origin of a particular IP route in your network. In the preceding example, the route to 10.0.0.1/32 was originated by a device with IP address 10.191.255.247.
The table below describes the significant fields shown in the display.
Table 52 show ip route with IP Address Field Descriptions Field
Description
Routing entry for 10.0.0.1/32
Network number and mask.
Known via...
Indicates how the route was derived.
Redistributing via...
Indicates the redistribution protocol.
Last update from 10.191.255.251
Indicates the IP address of the router that is the next hop to the remote network and the interface on which the last update arrived.
Routing Descriptor Blocks
Displays the next-hop IP address followed by the information source.
Route metric
This value is the best metric for this Routing Descriptor Block.
traffic share count
Indicates the number of packets transmitted over various routes.
The following sample output from the show ip route command displays the tag applied to the route 10.22.0.0/16. You must specify an IP prefix to see the tag value. The fields in the display are self-explanatory.
Device# show ip route 10.22.0.0 Routing entry for 10.22.0.0/16 Known via “isis”, distance 115, metric 12 Tag 120, type level-1 Redistributing via isis Last update from 172.19.170.12 on Ethernet2, 01:29:13 ago Routing Descriptor Blocks: * 172.19.170.12, from 10.3.3.3, via Ethernet2 Route metric is 12, traffic share count is 1 Route tag 120Examples
The following example shows that IP route 10.8.8.0 is directly connected to the Internet and is the next-hop (option 3) default gateway. Routes 10.1.1.1 [1/0], 10.3.2.1 [24/0], and 172.16.2.2 [1/0] are static, and route 10.0.0.0/0 is a default route candidate. The fields in the display are self-explanatory.
Device# show ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is 10.0.19.14 to network 0.0.0.0 10.0.0.0/24 is subnetted, 1 subnets C 10.8.8.0 is directly connected, Ethernet1 10.0.0.0/32 is subnetted, 1 subnets S 10.1.1.1 [1/0] via 10.8.8.1 10.0.0.0/32 is subnetted, 1 subnets S 10.3.2.1 [24/0] via 10.8.8.1 172.16.0.0/32 is subnetted, 1 subnets S 172.16.2.2 [1/0] via 10.8.8.1 10.0.0.0/28 is subnetted, 1 subnets C 10.0.19.0 is directly connected, Ethernet0 10.0.0.0/24 is subnetted, 1 subnets C 10.15.15.0 is directly connected, Loopback0 S* 10.0.0.0/0 [1/0] via 10.0.19.14The following sample output from the show ip route repair-paths command shows repair paths marked with the tag [RPR]. The fields in the display are self-explanatory:
Device# show ip route repair-paths Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route, H - NHRP + - replicated route, % - next hop override Gateway of last resort is not set 10.0.0.0/32 is subnetted, 3 subnets C 10.1.1.1 is directly connected, Loopback0 B 10.2.2.2 [200/0] via 172.16.1.2, 00:31:07 [RPR][200/0] via 192.168.1.2, 00:31:07 B 10.9.9.9 [20/0] via 192.168.1.2, 00:29:45 [RPR][20/0] via 192.168.3.2, 00:29:45 172.16.0.0/16 is variably subnetted, 2 subnets, 2 masks C 172.16.1.0/24 is directly connected, Ethernet0/0 L 172.16.1.1/32 is directly connected, Ethernet0/0 192.168.1.0/24 is variably subnetted, 2 subnets, 2 masks C 192.168.1.0/24 is directly connected, Serial2/0 L 192.168.1.1/32 is directly connected, Serial2/0 B 192.168.3.0/24 [200/0] via 172.16.1.2, 00:31:07 [RPR][200/0] via 192.168.1.2, 00:31:07 B 192.168.9.0/24 [20/0] via 192.168.1.2, 00:29:45 [RPR][20/0] via 192.168.3.2, 00:29:45 B 192.168.13.0/24 [20/0] via 192.168.1.2, 00:29:45 [RPR][20/0] via 192.168.3.2, 00:29:45 Device# show ip route repair-paths 10.9.9.9 >Routing entry for 10.9.9.9/32 > Known via "bgp 100", distance 20, metric 0 > Tag 10, type external > Last update from 192.168.1.2 00:44:52 ago > Routing Descriptor Blocks: > * 192.168.1.2, from 192.168.1.2, 00:44:52 ago, recursive-via-conn > Route metric is 0, traffic share count is 1 > AS Hops 2 > Route tag 10 > MPLS label: none > [RPR]192.168.3.2, from 172.16.1.2, 00:44:52 ago > Route metric is 0, traffic share count is 1 > AS Hops 2 > Route tag 10 > MPLS label: noneshow ip route vrf
To display the IP routing table associated with a specific VPN routing and forwarding (VRF) instance, use the show ip route vrf command in user EXEC or privileged EXEC mode.
show ip route vrf vrf-name [ connected | protocol [ as-number ] | list [ list-number ] | profile | static | summary | [ ip-prefix | ip-address ] [ mask | longer-prefixes ] | repair-paths | dhcp | supernets-only | tag { tag-value | tag-value-dotted-decimal [ mask ] } ]
Syntax Description
vrf-name
Name of the VRF.
connected
(Optional) Displays all connected routes in a VRF.
protocol
(Optional) Routing protocol. To specify a routing protocol, use one of the following keywords: bgp, egp, eigrp, hello, igrp, isis, ospf, or rip.
as-number
(Optional) Autonomous system number.
list number
(Optional) Specifies the IP access list to be displayed.
profile
(Optional) Displays the IP routing table profile.
static
(Optional) Displays static routes.
summary
(Optional) Displays a summary of routes.
ip-prefix
(Optional) Network for which routing information is displayed.
ip-address
(Optional) Address for which routing information is displayed.
mask
(Optional) Network mask.
longer-prefixes
(Optional) Displays longer prefix entries.
repair-paths
(Optional) Displays repair paths.
dhcp
(Optional) Displays routes added by the DHCP server.
supernets-only
(Optional) Displays only supernet entries.
tag
(Optional) Displays information about route tags in the VRF table.
tag-value
(Optional) Route tag values as a plain decimals.
tag-value-dotted-decimal
(Optional) Route tag values as a dotted decimals.
mask
(Optional) Route tag wildcard mask.
Command History
Release
Modification
12.0(5)T
This command was introduced.
12.2(2)T
This command was modified. The ip-prefix argument was added. The command output was enhanced to display information on multipaths to the specified network.
12.2(14)S
This command was integrated into Cisco IOS Release 12.2(14)S.
12.0(22)S
This command was modified. Support for Enhanced Interior Gateway Routing Protocol (EIGRP) VRFs was added.
12.2(15)T
This command was modified. Support for EIGRP VRFs was added.
12.2(27)SBC
This command was integrated into Cisco IOS Release 12.2(27)SBC.
12.2(33)SRA
This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2(33)SXH
This command was integrated into Cisco IOS Release 12.2(33)SXH. The output was enhanced to display remote label information and corresponding Multiprotocol Label Switching (MPLS) flags for prefixes that have remote labels stored in the Routing Information Base (RIB).
12.2(33)SRE
This command was modified. The repair-paths, dhcp, and supernets-only keywords were added. Support for the Border Gateway Protocol (BGP) Best External and BGP Additional Path features was added.
12.2(33)XNE
This command was integrated into Cisco IOS Release 12.2(33)XNE.
Cisco IOS XE Release 2.5
This command was integrated into Cisco IOS XE Release 2.5.
15.2(2)S
This command was modified. The tag keyword and tag-value, tag-value-dotted-decimal, and mask arguments were added to enable the display of route tags as plain or dotted decimals in the command output.
Cisco IOS XE Release 3.6S
This command was modified. The tag keyword and tag-value, tag-value-dotted-decimal, and mask arguments were added to enable the display of route tags as plain or dotted decimals in the command output.
15.2(4)S
This command was implemented on the Cisco 7200 series router.
15.1(1)SY
This command was integrated into Cisco IOS Release 15.1(1)SY.
Examples
The following sample output displays the IP routing table associated with the VRF named vrf1:
Device# show ip route vrf vrf1 Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP I - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, * - candidate default U - per-user static route, o - ODR T - traffic engineered route Gateway of last resort is not set B 10.0.0.0/8 [200/0] via 10.13.13.13, 00:24:19 C 10.0.0.0/8 is directly connected, Ethernet1/3 B 10.0.0.0/8 [20/0] via 10.0.0.1, 02:10:22 B 10.0.0.0/8 [200/0] via 10.13.13.13, 00:24:20This following sample output shows BGP entries in the IP routing table associated with the VRF named vrf1:
Device# show ip route vrf vrf1 bgp B 10.0.0.0/8 [200/0] via 10.13.13.13, 03:44:14 B 10.0.0.0/8 [20/0] via 10.0.0.1, 03:44:12 B 10.0.0.0/8 [200/0] via 10.13.13.13, 03:43:14The following sample output displays the IP routing table associated with a VRF named PATH:
Device# show ip route vrf PATH 10.22.22.0 Routing entry for 10.22.22.0/24 Known via "bgp 1", distance 200, metric 0 Tag 22, type internal Last update from 10.22.5.10 00:01:07 ago Routing Descriptor Blocks: * 10.22.7.8 (Default-IP-Routing-Table), from 10.11.3.4, 00:01:07 ago Route metric is 0, traffic share count is 1 AS Hops 1 10.22.1.9 (Default-IP-Routing-Table), from 10.11.1.2, 00:01:07 ago Route metric is 0, traffic share count is 1 AS Hops 1 10.22.6.10 (Default-IP-Routing-Table), from 10.11.6.7, 00:01:07 ago Route metric is 0, traffic share count is 1 AS Hops 1 10.22.4.10 (Default-IP-Routing-Table), from 10.11.4.5, 00:01:07 ago Route metric is 0, traffic share count is 1 AS Hops 1 10.22.5.10 (Default-IP-Routing-Table), from 10.11.5.6, 00:01:07 ago Route metric is 0, traffic share count is 1 AS Hops 1The following sample output from the show ip route vrf vrf-name tag command displays route tag information for routes associated with vrf1. The route tags in the sample output are displayed in dotted decimal format.
Device# show ip route vrf vrf1 tag 5 Routing Table: vrf1 Routing entry for 10.0.0.1/24 Known via "static", distance 1, metric 0 (connected) Tag 0.0.0.5 Routing Descriptor Blocks: * directly connected, via Null0 Route metric is 0, traffic share count is 1 Route tag 0.0.0.5The following sample outputs from the show ip route vrf command include recursive-via-host and recursive-via-connected flags:
Device# show ip route vrf v2 10.2.2.2 Routing Table: v2 Routing entry for 10.2.2.2/32 Known via "bgp 10", distance 20, metric 0 Tag 100, type external Last update from 192.168.1.1 00:15:54 ago Routing Descriptor Blocks: * 192.168.1.1, from 192.168.1.1, 00:15:54 ago, recursive-via-conn Route metric is 0, traffic share count is 1 AS Hops 1 Route tag 100 MPLS label: none Device# show ip route vrf v2 10.2.2.2 Routing Table: v2 Routing entry for 10.2.2.2/32 Known via "bgp 10", distance 200, metric 0 Tag 100, type internal Last update from 10.3.3.3 00:18:11 ago Routing Descriptor Blocks: * 10.3.3.3 (default), from 10.5.5.5, 00:18:11 ago, recursive-via-host Route metric is 0, traffic share count is 1 AS Hops 1 Route tag 100 MPLS label: 16 MPLS Flags: MPLS RequiredThe table below describes the significant fields shown in the displays.
Table 53 show ip route vrf Field Descriptions Field
Description
Routing entry for 10.22.22.0/24
Network number.
Known via ...
Indicates how the route was derived.
distance
Administrative distance of the information source.
metric
Metric used to reach the destination network.
Tag
Integer used to tag the route.
type
Indicates whether the route is an L1 type or L2 type of route.
Last update from 10.22.5.10
Indicates the IP address of the device that is the next hop to the remote network and identifies the interface on which the last update arrived.
00:01:07 ago
Specifies the last time the route was updated (in hours:minutes:seconds).
Routing Descriptor Blocks
Displays the next-hop IP address followed by the information source.
10.22.6.10, from 10.11.6.7, 00:01:07 ago
Indicates the next-hop address, the address of the gateway that sent the update, and the time that has elapsed since this update was received (in hours:minutes:seconds).
Route metric
This value is the best metric for this routing descriptor block.
Traffic share count
Indicates the number of packets transmitted over various routes.
AS Hops
Number of hops to the destination or to the device where the route first enters internal BGP (iBGP).
The following is sample output from the show ip route vrf command on devices using the Cisco IOS Software Modularity for Layer 3 VPNs feature. The output includes remote label information and corresponding MPLS flags for prefixes that have remote labels stored in the RIB if BGP is the label distribution protocol.
Device# show ip route vrf v2 10.2.2.2 Routing entry for 10.2.2.2/32 Known via "bgp 1", distance 200, metric 0, type internal Redistributing via ospf 2 Advertised by ospf 2 subnets Last update from 10.0.0.4 00:22:59 ago Routing Descriptor Blocks: * 10.0.0.4 (Default-IP-Routing-Table), from 10.0.0.31, 00:22:59 ago Route metric is 0, traffic share count is 1 AS Hops 0 MPLS label: 1300 MPLS Flags: MPLS RequiredThe table below describes the significant fields shown in the display.
Table 54 show ip route vrf Field Descriptions Field
Description
MPLS label
Displays the BGP prefix from the BGP peer. The output shows one of the following values:
- A label value (16–1048575).
- A reserved label value, such as explicit-null or implicit-null.
- The word “none” if no label is received from the peer.
The MPLS label field is not displayed if any of the following conditions is true:
- BGP is not the Label Distribution Protocol (LDP). However, Open Shortest Path First (OSPF) prefixes learned via sham links display an MPLS label.
- MPLS is not supported.
- The prefix is imported from another VRF, where the prefix was an Interior Gateway Protocol (IGP) prefix and LDP provided the remote label for it.
MPLS Flags
Name of the MPLS flag. One of the following MPLS flags is displayed:
- MPLS Required—Indicates that packets are forwarded to this prefix because of the presence of the MPLS label stack. If MPLS is disabled on the outgoing interface, the packets are dropped.
- No Global—Indicates that MPLS packets for this prefix are forwarded from the VRF interface and not from the interface in the global table. VRF interfaces prevent loops in scenarios that use iBGP multipaths.
- NSF—Indicates that the prefix is from a nonstop forwarding (NSF)-aware neighbor. If the routing information temporarily disappears due to a disruption in the control plane, packets for this prefix are preserved.
The following sample output from the show ip route vrf command shows repair paths in the routing table. The fields in the display are self-explanatory.
Device> show ip route vrf test1 repair-paths 192.168.3.0 Routing Table: test1 Routing entry for 192.168.3.0/24 Known via "bgp 10", distance 20, metric 0 Tag 100, type external Last update from 192.168.1.1 00:49:39 ago Routing Descriptor Blocks: * 192.168.1.1, from 192.168.1.1, 00:49:39 ago, recursive-via-conn Route metric is 0, traffic share count is 1 AS Hops 1 Route tag 100 MPLS label: none [RPR]10.4.4.4 (default), from 10.5.5.5, 00:49:39 ago, recursive-via-host Route metric is 0, traffic share count is 1 AS Hops 1 Route tag 100 MPLS label: 29 MPLS Flags: MPLS Required, No Globalshow tcp ha connections
To display connection-ID-to-TCP mapping data, use the show tcp ha connections command in privileged EXEC mode.
Usage Guidelines
The show tcp ha connections command is used to display connection-ID-to-TCP mapping data.
Examples
The following is sample output from the show tcp ha connections command:
Router# show tcp ha connections SSO enabled for 40 connections TCB Local Address Foreign Address (state) Conn Id 71EACE60 10.0.56.1.179 10.0.56.3.58671 ESTAB 37 71EA9320 10.0.53.1.179 10.0.53.3.58659 ESTAB 34 71EA35F8 10.0.41.1.179 10.0.41.3.58650 ESTAB 22 71A21FE0 10.0.39.1.179 10.0.39.3.58641 ESTAB 20 71EAA6E0 10.0.54.1.179 10.0.54.3.58663 ESTAB 35 71EA2238 10.0.40.1.179 10.0.40.3.58646 ESTAB 21 71EABAA0 10.0.55.1.179 10.0.55.3.58667 ESTAB 36 71EAE710 10.0.28.1.179 10.0.28.3.58676 ESTAB 9 71EA2728 10.0.50.1.179 10.0.50.3.58647 ESTAB 31 720541D8 10.0.49.1.179 10.0.49.3.58642 ESTAB 30 71EAA1F0 10.0.44.1.179 10.0.44.3.58662 ESTAB 25 2180B3A8 10.0.33.1.179 10.0.33.3.58657 ESTAB 14 71EAB5B0 10.0.45.1.179 10.0.45.3.58666 ESTAB 26 21809FE8 10.0.32.1.179 10.0.32.3.58653 ESTAB 13 71EA8E30 10.0.43.1.179 10.0.43.3.58658 ESTAB 24 71EAD350 10.0.27.1.179 10.0.27.3.58672 ESTAB 8 2180A9C8 10.0.52.1.179 10.0.52.3.58655 ESTAB 33 2180A4D8 10.0.42.1.179 10.0.42.3.58654 ESTAB 23 71EABF90 10.0.26.1.179 10.0.26.3.58668 ESTAB 7 71EA3AE8 10.0.51.1.179 10.0.51.3.58651 ESTAB 32 720546C8 10.0.59.1.179 10.0.59.3.58643 ESTAB 40The table below describes the significant fields shown in the display.
Table 55 show tcp ha connections Field Descriptions Field
Description
SSO enabled for
Displays the number of TCP connections that support BGP Nonstop Routing (NSR) with SSO.
TCB
An internal identifier for the endpoint.
Local Address
The local IP address and port.
Foreign Address
The foreign IP address and port (at the opposite end of the connection).
(state)
TCP connection state. A connection progresses through a series of states during its lifetime. The states that follow are shown in the order in which a connection progresses through them.
- LISTEN--Waiting for a connection request from any remote TCP and port.
- SYNSENT--Waiting for a matching connection request after having sent a connection request.
- SYNRCVD--Waiting for a confirming connection request acknowledgment after having both received and sent a connection request.
- ESTAB--Indicates an open connection; data received can be delivered to the user. This is the normal state for the data transfer phase of the connection.
- FINWAIT1--Waiting for a connection termination request from the remote TCP or an acknowledgment of the connection termination request previously sent.
Conn id
Identifying number of the TCP connection.
slow-peer detection
To use a policy template to specify a threshold time that dynamically determines a BGP slow peer, use the slow-peer detection command in policy template configuration mode. To restore the default value, use the no form of this command.
Usage Guidelines
Update messages are timestamped when they are formatted. The timestamp of the oldest update message in a peers queue is compared to the current time to determine if the peer is lagging more than the configured number of seconds. When a peer is dynamically detected to be a slow peer, the system will send a syslog message. The peer will be marked as recovered and another syslog message will be generated only after the peer’s update group converges.
NoteThe neighbor slow-peer detection command performs the same function as the bgp slow-peer detection command (at the address-family level), except that the neighbor slow-peer detection command overrides the address-family level command. When the neighbor slow-peer detection command is unconfigured, the system will function according to the address-family level configuration. The slow-peer detection command performs the same function through a peer policy template.
Examples
The following example specifies that if the timestamp on a peer’s update message is more than 360 seconds before the current time, the peer that sent the update message is considered to be slow. The commands configured under the peer-policy template will be applied to the neighbor once it inherits the peer-policy.
Router(config)# router bgp 13 Router(config-router)# template peer-policy ipv4_ucast_pp1 Router(config-router-ptmp)# slow-peer detection threshold 360 Router(config-router-ptmp)# slow-peer split-update-group dynamicRelated Commands
Command
Description
bgp slow-peer detection
Specifies a threshold time that dynamically determines a slow peer.
bgp slow-peer split-update-group dynamic
Moves a dynamically detected slow peer to a slow update group.
clear ip bgp slow
Moves dynamically configured slow peers back to their original update groups.
neighbor slow-peer split-update-group dynamic
Moves a dynamically detected slow peer to a slow update group.
slow-peer split-update-group dynamic
Moves a dynamically detected slow peer to a slow update group.
slow-peer split-update-group dynamic
To use a policy template to move a dynamically detected slow peer to a slow update group, use the slow-peer split-update-group dynamic command in policy template configuration mode. To disable dynamically detected slow peers from being moved to a slow update group, use the no form of this command.
Syntax Description
permanent
(Optional) Specifies that after the slow peer becomes a regular peer (converges), it is not moved back to its original update group automatically. It remains in the slow update group until the network administrator uses one of the clear slowcommands to move the peer to its original update group.
Usage Guidelines
When a peer is dynamically detected to be a slow peer, the slow peer is moved to a slow update group. If a static slow peer update group exists, the dynamic slow peer is moved to the static slow peer update group; otherwise, a new slow peer update group is created and the peer is moved to that group.
- We recommend you configure the permanent keyword. If the permanent keyword is configured, the peer is not automatically moved to its original update group. After you resolve the root cause of the slow peer, you can use the clear bgp slowcommand to move the peer back to its original update group.
- If the permanent keyword is not configured, the slow peer will be moved back to its regular original update group after it becomes a regular peer (converges).
NoteThe neighbor slow-peer split-update-group dynamiccommand performs the same function as the bgp slow-peer split-update-group dynamic command (at the address-family level), except that the neighbor slow-peer split-update-group dynamic command overrides the address-family level command. When the neighbor slow-peer split-update-group dynamic command is unconfigured, the system will function according to the address-family level configuration. The slow-peer split-update-group dynamic command performs the same function through a policy template.
If slow-peer split-update-group dynamicis configured, but no slow peer detection is configured, the detection will be done at the default threshold of 300 seconds. That is, detection is enabled automatically with its default threshold.
Examples
In the following example, the timestamp of the oldest message in a peers queue is compared to the current time to determine if the peer is lagging more than 360 seconds. If it is, the neighbor that sent the message is determined to be a slow peer, and is put in the slow peer update group. Because the permanent keyword is not configured, the slow peer will be moved back to its regular original update group after it becomes a regular peer (converges).
Router(config)# router bgp 13 Router(config-router)# template peer-policy ipv4_ucast_pp1 Router(config-router-ptmp)# slow-peer detection threshold 360 Router(config-router-ptmp)# slow-peer split-update-group dynamicslow-peer split-update-group static
To mark a BGP neighbor as a slow peer and move it to a slow update group, use the slow-peer split-update-group static command by using a peer policy template. To unmark the slow peer and return it to its original update group, use the no form of this command.
Command Default
No peer is marked as slow and moved to a slow peer update group in a static manner using a peer policy template.
Usage Guidelines
Configure a static slow peer when the peer is known to be slow (perhaps due to a slow link or low processing power).
The neighbor slow-peer split-update-group staticcommand performs the same function in address-family mode.
soo
To set the site-of-origin (SoO) value for a Border Gateway Protocol (BGP) peer policy template, use the soo command in policy-template configuration mode. To remove the SoO value, use the no form of this command.
Syntax Description
extended-community-value
Specifies the VPN extended community value. The value takes one of the following formats:
- A 16-bit autonomous system number, a colon, and a 32-bit number, for example: 45000:3
- A 32-bit IP address, a colon, and a 16-bit number, for example: 192.168.10.2:51
In Cisco IOS Release 12.4(24)T, 4-byte autonomous system numbers are supported in the range from 1.0 to 65535.65535 in asdot notation only.
In Cisco IOS XE Release 2.4, and later releases, 4-byte autonomous system numbers are supported in the range from 65536 to 4294967295 in asplain notation and in the range from 1.0 to 65535.65535 in asdot notation.
For more details about autonomous system number formats, see the router bgp command.
Command History
Release
Modification
12.4(11)T
This command was introduced.
12.2(33)SRB
This command was integrated into Cisco IOS Release 12.2(33)SRB.
12.2(33)SB
This command was integrated into Cisco IOS Release 12.2(33)SB.
12.4(24)T
Support for 4-byte autonomous system numbers in asdot notation only was added.
Cisco IOS XE Release 2.4
This command was modified. Support for asplain notation was added and the default format for 4-byte autonomous system numbers is now asplain.
12.2(33)SRE
This command was modified. Support for displaying 4-byte autonomous system numbers in asplain and asdot notation was added.
12.2(33)XNE
This command was modified. Support for displaying 4-byte autonomous system numbers in asplain and asdot notation was added.
15.0(1)SY
This command was integrated into Cisco IOS Release 15.0(1)SY.
15.1(1)SG
This command was modified. Support for displaying 4-byte autonomous system numbers in asplain and asdot notation was added.
Cisco IOS XE Release 3.3SG
This command was modified. Support for displaying 4-byte autonomous system numbers in asplain and asdot notation was added.
Usage Guidelines
Use this command to set the SoO value for a BGP peer policy template that a BGP neighbor can inherit. The SoO value is set for a peer policy template, and a BGP neighbor is identified under address family IPv4 VRF configuration mode to inherit the peer policy that contains the SoO value.
The SoO extended community is a BGP extended community attribute that is used to identify routes that have originated from a site so that the readvertisement of that prefix back to the source site can be prevented. The SoO extended community uniquely identifies the site from which a router has learned a route. BGP can use the SoO value associated with a route to prevent routing loops.
In releases prior to Cisco IOS Release 12.4(11)T, 12.2(33)SRB, and 12.2(33)SB, the SoO extended community attribute is configured using an inbound route map that sets the SoO value during the update process. The introduction of the neighbor soo and soo commands simplifies the SoO value configuration.
In Cisco IOS Release 12.4(24)T, the Cisco implementation of 4-byte autonomous system numbers uses asdot--1.2 for example--as the only configuration format, regular expression match, and output display, with no asplain support.
In Cisco IOS XE Release 2.4, and later releases, the Cisco implementation of 4-byte autonomous system numbers uses asplain--65538 for example--as the default regular expression match and output display format for autonomous system numbers, but you can configure 4-byte autonomous system numbers in both the asplain format and the asdot format as described in RFC 5396. To change the default regular expression match and output display of 4-byte autonomous system numbers to asdot format, use the bgp asnotation dot command followed by the clear ip bgp * command to perform a hard reset of all current BGP sessions.
NoteIf a BGP peer inherits from several peer policy templates that specify different SoO values, the SoO value in the last template applied takes precedence and is applied to the peer. However, direct configuration of the SoO value on the BGP neighbor overrides any inherited template configurations of the SoO value.
Examples
The following example shows how to create a peer policy template and configure an SoO value as part of the peer policy. Under address family IPv4 VRF, a neighbor is identified and configured to inherit the peer policy that contains the SoO value.
router bgp 45000 template peer-policy SOO_POLICY soo 45000:3 exit-peer-policy address-family ipv4 vrf SOO_VRF neighbor 192.168.3.2 remote-as 50000 neighbor 192.168.3.2 activate neighbor 192.168.3.2 inherit peer-policy SOO_POLICY endThe following example shows how to create a peer policy template and configure an SoO value using a 4-byte autonomous system number, 1.2 in asdot format, as part of the peer policy. Under address family IPv4 VRF, a neighbor is identified and configured to inherit the peer policy that contains the SoO value. This example requires Cisco IOS Release 12.4(24)T, Cisco IOS XE Release 2.4, or a later release.
router bgp 1.2 template peer-policy SOO_POLICY soo 1.2:3 exit-peer-policy address-family ipv4 vrf SOO_VRF neighbor 192.168.3.2 remote-as 1.14 neighbor 192.168.3.2 activate neighbor 192.168.3.2 inherit peer-policy SOO_POLICY endRelated Commands
Command
Description
address-family ipv4 (BGP)
Enters address family configuration mode to configure a routing session using standard IP Version 4 address prefixes.
neighbor soo
Sets the SoO value for a BGP neighbor or peer group.
router bgp
Configures the BGP routing process.
template peer-policy
Creates a peer policy template and enters policy-template configuration mode.
stats-reporting-period (bmp)
To configure the time interval in which the BGP Monitoring Protocol (BMP) server receives the statistics report from the BGP BMP neighbors, use the stats-reporting-period command in BMP server configuration mode. To disable the reporting period for statistics, use the no form of the command.
Syntax Description
report-period Specifies the interval, in seconds, in which a specific BMP server receives the statistics report from its connected BGP BMP neighbors. The value of the reporting period that you can configure, ranges from 1 to 3600 seconds.
Command Default
The BMP server does not receive statistics reporting from the BGP BMP neighbors at periodic intervals.
Command Modes
BMP server configuration (config-router-bmpsrvr)
Command History
Release Modification 15.4(1)S
This command was introduced.
Cisco IOS XE Release 3.11S
This command was integrated into Cisco IOS XE Release 3.11S.
Usage Guidelines
Use the bmp server command to enter BMP server configuration mode and configure a specific BMP server. To configure BGP BMP neighbors to which the BMP servers establish a connection, use the neighbor bmp-activate command in router configuration mode. Use the show ip bgp bmp command to verify the statistics reporting period that is configured for BMP server.
Examples
The following example show how to enter BMP server configuration mode and configure the statistics reporting period for BMP server 1 and 2:
Device> enable Device# configure terminal Device(config)# router bgp 65000 Device(config-router)# bmp server 1 Device(config-router-bmpsrvr)# activate Device(config-router-bmpsrvr)# address 10.1.1.1 port-number 8000 Device(config-router-bmpsrvr)# stats-reporting-period 30 Device(config-router-bmpsrvr)# exit-bmp-server-mode Device(config-router)# bmp server 2 Device(config-router-bmpsrvr)# activate Device(config-router-bmpsrvr)# address 20.1.1.1 port-number 9000 Device(config-router-bmpsrvr)# stats-reporting-period 30 Device(config-router-bmpsrvr)# endThe following is sample output from the show ip bgp bmp server command for BMP server number 1 and 2. The statistics reporting interval on BMP server 1 and 2 has been set to 30 seconds, therefore each server receives statistics messages from its connected BGP BMP neighbor in each cycle of 30 seconds:
Device# show ip bgp bmp server summary Number of BMP servers configured: 2 Number of BMP neighbors configured: 10 Number of neighbors on TransitionQ: 0, MonitoringQ: 0, ConfigQ: 0 Number of BMP servers on StatsQ: 0 BMP Refresh not in progress, refresh not scheduled Initial Refresh Delay configured, refresh value 30s BMP buffer size configured, buffer size 2048 MB, buffer size bytes used 0 MB ID Host/Net Port TCB Status Uptime MsgSent LastStat 1 10.1.1.1 8000 0x2A98B07138 Up 00:38:49 162 00:00:09 2 20.1.1.1 9000 0x2A98E17C88 Up 00:38:49 46 00:00:04 Device# show ip bgp bmp server summary Number of BMP servers configured: 2 Number of BMP neighbors configured: 10 Number of neighbors on TransitionQ: 0, MonitoringQ: 0, ConfigQ: 0 Number of BMP servers on StatsQ: 0 BMP Refresh not in progress, refresh not scheduled Initial Refresh Delay configured, refresh value 30s BMP buffer size configured, buffer size 2048 MB, buffer size bytes used 0 MB ID Host/Net Port TCB Status Uptime MsgSent LastStat 1 10.1.1.1 8000 0x2A98B07138 Up 00:40:19 189 00:00:07 2 20.1.1.1 9000 0x2A98E17C88 Up 00:40:19 55 00:00:02
Note
If we configure several BGP BMP neighbors to be monitored by the BMP servers, for example 10, then 10 statistics messages are received by both servers in each periodic cycle that is configured.synchronization
To enable the synchronization between BGP and your Interior Gateway Protocol (IGP) system, use the synchronization command in address family or router configuration mode. To enable the Cisco IOS software to advertise a network route without waiting for the IGP, use the no form of this command.
Command History
Release
Modification
10.0
This command was introduced.
12.0(7)T
Address family configuration mode was added.
12.2(8)T
Command default behavior changed to disabled.
12.2(33)SRA
This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2SX
This command is supported in the Cisco IOS Release 12.2SX train. Support in a specific 12.2SX release of this train depends on your feature set, platform, and platform hardware.
Usage Guidelines
Usually, a BGP speaker does not advertise a route to an external neighbor unless that route is local or exists in the IGP. By default, synchronization between BGP and the IGP is turned off to allow the Cisco IOS software to advertise a network route without waiting for route validation from the IGP. This feature allows routers and access servers within an autonomous system to have the route before BGP makes it available to other autonomous systems.
Use the synchronization command if routers in the autonomous system do not speak BGP.
Examples
The following example shows how to enable synchronization in router configuration mode. The router validates the network route in its IGP before advertising the route externally.
router bgp 65120 synchronizationThe following example shows how to enable synchronization in address family configuration mode. The router validates the network route in its IGP before advertising the route externally.
router bgp 65120 address-family ipv4 unicast synchronizationRelated Commands
Command
Description
address-family ipv4 (BGP)
Places the router in address family configuration mode for configuring routing sessions such as BGP, RIP, or static routing sessions that use standard IP Version 4 address prefixes.
address-family vpnv4
Places the router in address family configuration mode for configuring routing sessions such as BGP, RIP, or static routing sessions that use standard VPN Version 4 address prefixes.
table-map
To specify a route map that modifies a metric, tag, or traffic index value (of routes that pass the route map) when the IP routing table is updated with BGP learned routes, or to selectively download BGP routes to the RIB, use the table-map command in address family or router configuration mode. To disable either function, use the no form of the command.
Syntax Description
Command History
Release
Modification
10.0
This command was introduced.
12.0(7)T
This command was modified. Address family configuration mode was added.
12.2(33)SRA
This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2SX
This command is supported in the Cisco IOS Release 12.2SX train. Support in a specific 12.2SX release of this train depends on your feature set, platform, and platform hardware.
15.1(2)SNG
This command was implemented on the Cisco ASR 901 Series Aggregation Services Routers.
Cisco IOS XE Release 2.5
This command was modified. The filter keyword was added.
Cisco IOS XE Release 3.9S
This command was modified. Support for the IPv6 address family was added.
Usage Guidelines
A table map references a route map that sets metrics, a tag value, or a traffic index for routes that are updated in the BGP routing table, or controls whether routes are downloaded to the RIB.
When the table-map command:
- Does not include the filter keyword, the route map referenced is used to set certain properties of a route before the route is installed (downloaded) into the RIB. The route is always downloaded, regardless of whether it is permitted or denied by the route map.
- Includes the filter keyword, the route map referenced also controls whether the BGP route is downloaded to the RIB. A BGP route is not downloaded to the RIB if it is denied by the route map.
You can use match clauses in the route map that the table map references. The route map can support existing policies similar to the ones available for inbound and outbound route maps of a neighbor, including match as-path, match community, match extcommunity, match ip address prefix-list, and match ip next-hop.
Unlike a route map, a table map is not followed by match or set commands.
Note
After changing the table-map configuration or the route map that it references, you must issue the clear ip bgp table-map command in order for the changes to take effect. The clear ip bgp table-map command causes a re-download of routes from BGP to the RIB.Examples
In the following example, a prefix list called NEWNAME permits certain routes. Those routes are subject to the route map named TRAFFIC_BUCKET, which sets the traffic index of those routes to 5. That route map is referenced by the table map, which means that those routes are downloaded and installed in the RIB with their traffic index set to 5. The table map controls which routes had their traffic index set. Because the filter keyword is omitted, the table map does not filter routes from being downloaded and installed in the RIB.
ip prefix-list NEWNAME permit 192.168.35.0/24 permit 192.168.36.0/24 ! route-map TRAFFIC_BUCKET match ip address prefix-list NEWNAME set traffic-index 5 ! router bgp 100 address-family ipv4 unicast table-map TRAFFIC_BUCKET ! clear ip bgp ipv4 unicast table-mapIn the following example, the Selective Route Download feature is configured by specifying the filter keyword. Only routes that pass the route map named FEW_ROUTES are downloaded to the RIB:
ip prefix-list NAME3 permit 192.168.1.1/24 permit 192.168.5.1/24 route-map FEW_ROUTES permit 10 match ip address prefix-list NAME3 ! router bgp 100 neighbor 192.168.1.1 remote-as neighbor 192.168.5.1 remote-as address-family ipv4 unicast table-map FEW_ROUTES filter ! clear ip bgp ipv4 unicast table-mapRelated Commands
Command
Description
address-family ipv4 (BGP)
Places the router in address family configuration mode for configuring routing sessions such as BGP, RIP, or static routing sessions that use standard IP Version 4 address prefixes.
address-family ipv6
Places the router in IPv6 address family configuration mode for configuring routing sessions, such as BGP, that use standard IPv6 address prefixes.
clear ip bgp table-map
Initiates a re-download of BGP routes to the RIB.
match as-path
Matches a BGP autonomous system path access list.
match community
Matches a community list number or name.
match extcommunity
Matches an extended community list name.
match ip address prefix-list
Matches routes that pass a prefix list.
match ip next-hop
Matches routes that have a next hop address passed by one of the access lists specified.
route-map (IP)
Defines the conditions for redistributing routes from one routing protocol into another, or enables policy routing.
template peer-policy
To create a peer policy template and enter policy-template configuration mode, use the template peer-policy command in router configuration mode. To remove a peer policy template, use the no form of this command.
Command Default
Removing a peer policy template by using the no form of this command removes all policy configurations inside of the template.
Command History
Release
Modification
12.0(24)S
This command was introduced.
12.2(18)S
This command was integrated into Cisco IOS Release 12.2(18)S.
12.3(4)T
This command was integrated into Cisco IOS Release 12.3(4)T.
12.2(27)SBC
This command was integrated into Cisco IOS Release 12.2(27)SBC.
12.2SX
This command is supported in the Cisco IOS Release 12.2SX train. Support in a specific 12.2SX release of this train depends on your feature set, platform, and platform hardware.
Usage Guidelines
Peer policy templates are used to group and apply the configuration of commands that are applied within specific address-families and NLRI configuration mode. Peer policy templates are created and configured in peer policy configuration mode. BGP policy commands that are configured for specific address-families or NLRI configuration modes are configured in a peer policy template. The following BGP policy commands are supported by peer policy templates:
- advertisement-interval
- allowas-in
- as-override
- capability
- default-originate
- distribute-list
- dmzlink-bw
- exit-peer-policy
- filter-list
- inherit peer-policy
- maximum-prefix
- next-hop-self
- next-hop-unchanged
- prefix-list
- remove-private-as
- route-map
- route-reflector-client
- send-community
- send-label
- soft-reconfiguration
- unsuppress-map
- weight
Peer policy templates are used to configure BGP policy commands that are configured for neighbors that belong to specific address-families and NLRI configuration modes. Like peer session templates, peer policy templates are configured once and then applied to many neighbors through the direct application of a peer policy template or through inheritance from peer policy templates. The configuration of peer policy templates simplifies the configuration of BGP policy commands that are applied to all neighbors within an autonomous system.
Peer policy templates support direct and indirect inheritance from up to eight peer policy templates. Inherited peer policy templates are configured with sequence numbers like route-maps. An inherited peer policy template, like a route-map, is evaluated starting with the inherit statement with the lowest sequence number and ending with the highest sequence number. However, there is a difference; a peer policy template will not fall through like a route-map. Every sequence is evaluated, and if a BGP policy command is reapplied with different value, it will overwrite any previous value from a lower sequence number.
Peer policy templates support only general policy commands. BGP policy configuration commands that are configured only for specific address families or NLRI configuration modes are configured with peer policy templates.
NoteA BGP neighbor cannot be configured to work with both peer groups and peer templates. A BGP neighbor can be configured to belong only to a peer group or to inherit policies from only peer templates.
Examples
The following example creates a peer policy template named CUSTOMER-A. This peer policy template is configured to inherit the configuration from the peer policy templates named PRIMARY-IN and GLOBAL.
Router(config-router)# template peer-policy CUSTOMER-A Router(config-router-ptmp)# route-map SET-COMMUNITY in Router(config-router-ptmp)# filter-list 20 in Router(config-router-ptmp)# inherit peer-policy PRIMARY-IN 20 Router(config-router-ptmp)# inherit peer-policy GLOBAL 10 Router(config-router-ptmp)# exit-peer-policy Router(config-router)#Related Commands
Command
Description
advertisement-interval
Sets the minimum interval between the sending of BGP routing updates.
allowas-in
Configures PE routers to allow readvertisement of all prefixes containing duplicate autonomous system numbers.
as-override
Configures a PE router to override the ASN of a site with the ASN of a provider.
capability orf prefix-list
Configures outbound route filtering and advertises the capability to send and receive ORF updates to the neighbor routers.
default-originate
Originates a default route to the local router.
distribute-list
Distributes BGP neighbor information as specified in an access list.
dmzlink-bw
Advertises the bandwidth of links that are used to exit an autonomous system.
exit peer-policy
Exits policy-template configuration mode and enters router configuration mode.
filter-list
Sets up a BGP filter.
inherit peer-policy
Configures a peer policy template to inherit the configuration from another peer policy template.
maximum-prefix
Controls how many prefixes can be received from a neighbor.
neighbor inherit peer-policy
Configures a router to send a peer policy template to a neighbor so that the neighbor can inherit the configuration.
neighbor send-label
Enables a BGP router to send MPLS labels with BGP routes to a neighboring BGP router.
next-hop-self
Disables next-hop processing of BGP updates on the router.
next-hop-unchanged
Propagates the next- hop unchanged for iBGP paths to this router.
prefix-list
Specifies a prefix list, a CLNS filter set, or a CLNS filter expression to be used to filter BGP advertisements.
remove-private-as
Removes the private autonomous system number from outbound routing updates.
route-map
Defines the conditions for redistributing routes from one routing protocol into another, or enables policy routing.
route-reflector-client
Configures the router as a BGP route reflector and configures the specified neighbor as its client.
send-community
Specifies that the BGP community attribute should be sent to the specified neighbor.
show ip bgp template peer-policy
Displays locally configured peer policy templates.
show ip bgp template peer-session
Displays locally configured peer session templates.
soft-reconfiguration
Configures the Cisco IOS software to start storing updates.
template peer-session
Creates a peer session template and enters session-template configuration mode.
unsuppress-map
Selectively unsuppresses surpressed routes.
weight
Assigns a weight to a neighbor connection.
template peer-session
To create a peer session template and enter session-template configuration mode, use the template peer-session command in router configuration mode. To remove a peer session template, use the no form of this command.
Command Default
Removing a peer session template by using the no form of this command removes all session command configurations inside of the template.
Command History
Release
Modification
12.0(24)S
This command was introduced.
12.2(18)S
This command was integrated into Cisco IOS Release 12.2(18)S.
12.3(4)T
This command was integrated into Cisco IOS Release 12.3(4)T.
12.2(27)SBC
This command was integrated into Cisco IOS Release 12.2(27)SBC.
12.2SX
This command is supported in the Cisco IOS Release 12.2SX train. Support in a specific 12.2SX release of this train depends on your feature set, platform, and platform hardware.
Usage Guidelines
Peer session templates are used to group and apply the configuration of general session commands to groups of neighbors that share common session configuration elements. General session commands that are common for neighbors that are configured in different address families can be configured within the same peer session template. Peer session templates are created and configured in peer session configuration mode. Only general session commands can be configured in a peer session template. The following general session commands are supported by peer session templates:
- description
- disable-connected-check
- ebgp-multihop
- exit peer-session
- inherit peer-session
- local-as
- password
- remote-as
- shutdown
- timers
- translate-update
- update-source
- version
General session commands can be configured once in a peer session template and then applied to many neighbors through the direct application of a peer session template or through indirect inheritance from a peer session template. The configuration of peer session templates simplify the configuration of general session commands that are commonly applied to all neighbors within an autonomous system.
Peer session templates support direct and indirect inheritance. A peer can be configured with only one peer session template at a time, and that peer session template can contain only one indirectly inherited peer session template. However, each inherited session template can also contain one indirectly inherited peer session template. So, only one directly applied peer session template and up to seven additional indirectly inherited peer session templates can be applied, allowing you to apply up to a maximum of eight peer session configurations to a neighbor: the configuration from the directly inherited peer session template and the configurations from up to seven indirectly inherited peer session templates. Inherited peer session templates are evaluated first, and the directly applied template will be evaluated and applied last. So, if a general session command is reapplied with a different value, the subsequent value will have priority and overwrite the previous value that was configured in the indirectly inherited template.
Peer session templates support only general session commands. BGP policy configuration commands that are configured only for specific address families or NLRI configuration modes are configured with peer policy templates.
NoteA BGP neighbor cannot be configured to work with both peer groups and peer templates. A BGP neighbor can be configured only to belong to a peer group or to inherit policies from peer templates.
Examples
The following example creates a peer session template named CORE1. This example inherits the configuration of the peer session template named INTERNAL-BGP.
Router(config-router)# template peer-session CORE1 Router(config-router-stmp)# description CORE-123 Router(config-router-stmp)# update-source loopback 1 Router(config-router-stmp)# inherit peer-session INTERNAL-BGP Router(config-router-stmp)# exit-peer-session Router(config-router)#Related Commands
Command
Description
description
Configures a description to be displayed by the local or a peer router.
disable-connected-check
Disables connection verification for eBGP peers no more than one hop away when the eBGP peer is configured with a loopback interface.
ebgp-multihop
Accepts or initiates BGP connections to external peers residing on networks that are not directly connected.
exit peer-session
Exits session-template configuration mode and enters router configuration mode.
inherit peer-session
Configures a peer session template to inherit the configuration from another peer session template.
local-as
Allows the customization of the autonomous system number for eBGP peer groupings.
neighbor inherit peer-session
Configures a router to send a peer session template to a neighbor so that the neighbor can inherit the configuration.
neighbor translate-update
Upgrades a router running BGP in the NLRI format to support multiprotocol BGP.
password
Enables MD5 authentication on a TCP connection between two BGP peers.
remote-as
Adds an entry to the BGP or multiprotocol BGP neighbor table.
show ip bgp template peer-policy
Displays locally configured peer policy templates.
show ip bgp template peer-session
Displays locally configured peer session templates.
shutdown
Disables a neighbor or peer group.
timers bgp
Adjusts BGP network timers.
update-source
Specifies that the Cisco IOS software allow internal BGP sessions to use any operational interface for TCP connections.
version
Configures the Cisco IOS software to accept only a particular BGP version.
timers bgp
To adjust BGP network timers, use the timers bgp command in router configuration mode. To reset the BGP timing defaults, use the noform of this command.
Syntax Description
keepalive
Frequency (in seconds) with which the Cisco IOS software sends keepalive messages to its peer. The default is 60 seconds. The range is from 0 to 65535.
holdtime
Interval (in seconds) after not receiving a keepalive message that the software declares a peer dead. The default is 180 seconds. The range is from 0 to 65535.
min-holdtime
(Optional) Interval (in seconds) specifying the minimum acceptable hold-time from a BGP neighbor. The minimum acceptable hold-time must be less than, or equal to, the interval specified in the holdtimeargument. The range is from 0 to 65535.
Command History
Release
Modification
10.0
This command was introduced.
12.0(26)S
The min-holdtime argument was added.
12.3(7)T
The min-holdtime argument was added.
12.2(22)S
The min-holdtime argument was added.
12.2(27)SBC
The min-holdtime argument was added and this command was integrated into Cisco IOS Release 12.2(27)SBC.
12.2(33)SRA
The min-holdtime argument was added and this command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2(33)SXH
The min-holdtime argument was added and this command was integrated into Cisco IOS Release 12.2(33)SXH.
Usage Guidelines
When configuring the holdtime argument for a value of less than twenty seconds, the following warning is displayed:
% Warning: A hold time of less than 20 seconds increases the chances of peer flappingIf the minimum acceptable hold-time interval is greater than the specified hold-time, a notification is displayed:
% Minimum acceptable hold time should be less than or equal to the configured hold time
NoteWhen the minimum acceptable hold-time is configured on a BGP router, a remote BGP peer session is established only if the remote peer is advertising a hold-time that is equal to, or greater than, the minimum acceptable hold-time interval. If the minimum acceptable hold-time interval is greater than the configured hold-time, the next time the remote session tries to establish, it will fail and the local router will send a notification stating “unacceptable hold time.”
update-source (bmp)
To configure the interface source for routing updates on the BGP Monitoring Protocol (BMP) server, use the update-source command in BMP server configuration mode. To disable configuration of the interface source, use the no form of the command.
update-source interface-type interface-number
Syntax Description
interface-type interface-number Specifies the interface type and number as the source for the BMP server routing updates.
Command Default
No interface source is configured on the BMP servers.
Command Modes
BMP server configuration (config-router-bmpsrvr)
Command History
Release Modification 15.4(1)S
This command was introduced.
Cisco IOS XE Release 3.11S
This command was integrated into Cisco IOS XE Release 3.11S.
Usage Guidelines
Use the bmp server command to enter BMP server configuration mode and configure a specific BMP server. To configure BGP BMP neighbors to which the BMP servers establish a connection, use the neighbor bmp-activate command in router configuration mode. Use the show running-config command to verify the interface that has been configured.
Examples
The following example show how to enter BMP server configuration mode and configure an interface source for routing updates:
Device> enable Device# configure terminal Device(config)# router bgp 65000 Device(config-router)# bmp server 1 Device(config-router-bmpsrvr)# activate Device(config-router-bmpsrvr)# address 10.1.1.1 port-number 8000 Device(config-router-bmpsrvr)# update-source ethernet 0/0 Device(config-router-bmpsrvr)# exit-bmp-server-mode Device(config-router)# bmp server 2 Device(config-router-bmpsrvr)# activate Device(config-router-bmpsrvr)# address 20.1.1.1 port-number 9000 Device(config-router-bmpsrvr)# update-source ethernet 2/0 Device(config-router-bmpsrvr)# endThe following is sample output from the show ip bgp bmp server command for BMP server number 1 and 2. The “update-source” field in the output displays the interface source configured for BMP servers 1 and 2 for routing updates:
Device# show running-config | section bmp bmp server 1 address 10.1.1.1 port-number 8000 description SERVER1 session-startup route-refresh initial-delay 20 failure-retry-delay 40 flapping-delay 120 update-source Ethernet0/0 activate exit-bmp-server-mode bmp server 2 address 20.1.1.1 port-number 9000 description SERVER2 session-startup route-refresh initial-delay 20 failure-retry-delay 40 flapping-delay 120 update-source Ethernet2/0 activate exit-bmp-server-mode neighbor 30.1.1.1 bmp-activate all neighbor 40.1.1.1 bmp-activate all neighbor 50.1.1.1 bmp-activate allve
To specify the Virtual Private LAN Service (VPLS) endpoint (VE) ID value or ID range value for a VPLS configuration, use the ve command in L2VPN VFI autodiscovery configuration mode. To remove the entry, use the no form of this command.
Usage Guidelines
The ve id id-value command specifies the local VE identifier for the VFI for a VPLS configuration.
The VE ID identifies a VFI within a VPLS service. This means that VFIs in the same VPLS service cannot share the same VE ID. The scope of the VE ID is only within a bridge domain. Therefore, VFIs in different bridge domains within a PE can still use the same VE ID.
The ve range range-value command overrides the minimum size of the VE block. The default minimum size is 10. Any configured VE range must be higher than 10.
