Table Of Contents

Preface

Document Revision History

Audience

Organization

Obtaining Documentation and Submitting a Service Request

Preface

---

This guide describes the implementation of the Simple Network Management Protocol (SNMP) and Management Information Base (MIB) for Cisco RF Gateway-10 (RFGW-10).

SNMP provides a set of commands for setting and retrieving the values of operating parameters on the RFGW-10. RFGW-10 information is stored in a virtual storage area called a MIB, which contains many objects that describe RFGW-10 components and provides information about the status of the components. This chapter provides an overview of this guide with the following sections:

•Document Revision History

•Audience

•Organization

•Obtaining Documentation and Submitting a Service Request

Document Revision History

The following Revision History tables record technical changes, additions, and corrections to this document. The table shows the release number and document revision number for the change, the date of the change, and a brief summary of the change.

Release	Part Number	Publication Date	Change Summary
Cisco IOS-XE Release 3.3.0SQ	OL-18688-04	July 2013	Updated SCTE-HMS-MPEG-MIB
Cisco IOS-XE Release 3.2.0SQ	OL-18688-03	October 2012	Added DOCS-DRF-MIB
Cisco IOS Release 12.2(50)SQ	OL-18688-02	November 2009	Updated SCTE-HMS-MPEG-MIB

Audience

This guide is intended for system and network administrators who must configure the RFGW-10 for operation and monitor its performance in the network.

This guide may also be useful for application developers who are developing management applications for the RFGW-10.

Organization

This guide contains the following chapters:

•Chapter 1 "Cisco RFGW-10 MIB Overview," provides background information about SNMP and its implementation on Cisco RFGW-10.

•Chapter 2 "Configuring SNMP and MIB Support," provides instructions for configuring SNMP management support on the RFGW-10.

•Chapter 3 "MIB Specifications," describes each MIB included in the software image. Each description lists any constraints as to how the MIB is implemented on the RFGW-10.

•Chapter 4 "Monitoring Notifications," describes the SNMP traps and notifications supported by the RFGW-10.

•Chapter  "," describes how to perform common tasks on the RFGW-10.

• —Glossary provides a list of terms and the definitions.

Obtaining Documentation and Submitting a Service Request

For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation:

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html

Subscribe to the What's New in Cisco Product Documentation as an RSS feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service. Cisco currently supports RSS Version 2.0.