 Feedback
|
Table Of Contents
Release Notes for Cisco
Secure Services Client Release 4.2.3Unsupported Environmental Features
Roaming and Disk Protection Applications
User Certificates from the Windows Certificate Store
Obtaining Documentation and Submitting a Service Request
Release Notes for Cisco
Secure Services Client Release 4.2.3
May, 2009
Contents
•
Obtaining Documentation and Submitting a Service Request
Introduction
This document describes important notes, limitations, open caveats, resolved caveats, and closed caveats for Cisco Secure Services Client (SSC) Release 4.2.3.
System Requirements
Supported OS Environments
XP Professional (SP1, SP2), 2K (SP4), Win2K Servers (SP4), Win2003 Server
Novell Client version 4.91 SP1 with Hotfix TID2972711
New and Changed Information
New Features
This is a maintenance release and does not contain any new features.
Limitations and Restrictions
Unsupported Environmental Features
The following environmental features are not supported in release 4.0.5 or 4.1.0:
•
For example, SSC does not function properly with IBM ThinkVantage Fingerprint device software versions earlier than version 5. It is recommended that users update to the most recent version available (5.6 at the time of this note) before evaluating compatibility with their individual machine. This update can be obtained at the following URL:
http://www-307.ibm.com/pc/support/site.wss/TVAN-EAPFPR.html
•
•
Important Notes
Roaming and Disk Protection Applications
Software that is designed to protect a laptop's disk drive from physical jarring prevents any disk drive access while vibration is sensed. When using this feature, moving a laptop from one access point to another can cause roaming delays (interruptions in network connectivity). Such delays should not significantly affect applications that are designed to withstand network interruptions. Users can, at some risk, disable the disk-protection utility. Many laptop manufacturers suggest that users stabilize computers by placing them in standby mode before they are in transit which should prevent any problems. SSC has been tested with one such application, the ThinkVantage Active Protection System, to confirm this.
Disabling Multiple Clients
Do not configure multiple client applications (such as Windows Zero Config (WCZ) and Cisco Aironet Desktop Utility) in addition to SSC to control an access point with the same SSID. Allowing multiple applications to carry out write operations (as well as carry on EAPOL messaging required for making a connection) through the same network adapter might disrupt both applications, resulting in unpredictable behavior in both client applications.
If you must configure multiple applications with the same network, you must disable all but one of the client applications and use the enabled client to make connections.
Note
SSC can be disabled easily from the Client main menu or from the system icon. Individual adapters can be disabled easily from the Manage Adapter dialog. Disabling other third-party clients might not be a simple operation. If a third-party client cannot be disabled, it should be uninstalled. For example, the Cisco Aironet Desktop Utility (ADU) must be uninstalled to allow SSC to control the wireless adapter.
User Certificates from the Windows Certificate Store
If you use user client certificates from the Windows certificate store, ensure that you understand the requirements for certificate storage and accessibility by machine and user profiles. For example, the use of client certificates from the Windows store is not supported when configuring a user-only network that requires pre-logon authentication. For more information, use the SSC's help or user guide.
Restarting the SSC Service
If SSC becomes suspended inadvertently, the SSC service must be restarted. If the service fails to stop or restart properly, you must restart the machine.
The service can always be restarted by restarting the machine.
If you have Windows administrative privileges, you can manually stop and start the SSC service by choosing Start > Control Panel > Administrative Tools > Services > Cisco Secure Services Client.
Managing Adapters
If you get a message that a Serious Adapter Problem has been encountered and SSC automatically releases control of the adapter, Cisco recommends that you reactivate control of the adapter through the SSC's Manage Adapters menu item. If this fails, you must stop and restart the Cisco Secure Services Client service through the Windows Services dialog or restart the PC.
Caveats
Open Caveats
These issues are open for SSC Release 4.2.3:
•
A lockup condition has been observed that causes the current network access device to cycle between failed (red) and connecting (yellow) as observed in the Manage Networks window. Network connectivity is lost and the system tray icon is either steady-state idle (grey) or connecting (yellow).
Workaround: Disable and then re-enabled the network adapter (Using either the client or adapter controls of the SSC is not sufficient). From the Windows Network Connections window, select the Wireless Network Connection and right-click. Then click Disable in the resulting pop-up menu. Repeat and click Enable.
Resolved Caveats
These caveats are resolved for SSC Release 4.2.3:
•
•
In addition, the following issues are also resolved in this release:
•
•
•
Closed Caveats
These caveats are closed for SSC Release 4.2.3:
•
Workaround: None available in SSC. A possible work around is to change the ACS configuration to allow authenticated in-band provisioning.
•
Workaround: None.
•
If the PC experiences a high system load during logoff, SSC may suffer from resource starvation. If the network profile stores credentials and has remember forever enabled, the credentials may not be stored properly.
Workaround: None.
Troubleshooting
For the most up-to-date, detailed troubleshooting information, refer to the Cisco TAC website at this URL:
http://www.cisco.com/en/US/support/index.html
Related Documentation
For more information about Cisco Secure Services Client, refer to the following documents:
Cisco Secure Services Client for Windows 2K/XP User Guide Release 4.2
http://www.cisco.com/en/US/products/ps7034/products_user_guide_list.html
The user guide contains detailed information on operating, and locally configuring the client. The single guide covers the three distinct versions of the client: the out-of-the-box version, the deployed Configurable End-User's version and the deployed Preset End-User's version. The content is taken directly from the client's embedded help system documentation.
Cisco Secure Services Client Administrator Guide Release 4.2
http://www.cisco.com/en/US/products/ps7034/prod_maintenance_guides_list.html
The administrator guide contains detailed information on deploying preconfigured end-user SSCs. This document describes the components of the underlying XML schema which controls the content and format of the deployment distribution package (configuration file). It also describes several Administrator utilities that are available to assist in the deployment process.
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0.
This document is to be used in conjunction with the documents listed in the "Related Documentation" section.
CCDE, CCSI, CCENT, Cisco Eos, Cisco HealthPresence, the Cisco logo, Cisco Lumin, Cisco Nexus, Cisco Nurse Connect, Cisco Stackpower, Cisco StadiumVision, Cisco TelePresence, Cisco WebEx, DCE, and Welcome to the Human Network are trademarks; Changing the Way We Work, Live, Play, and Learn and Cisco Store are service marks; and Access Registrar, Aironet, AsyncOS, Bringing the Meeting To You, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, CCVP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Collaboration Without Limitation, EtherFast, EtherSwitch, Event Center, Fast Step, Follow Me Browsing, FormShare, GigaDrive, HomeLink, Internet Quotient, IOS, iPhone, iQuick Study, IronPort, the IronPort logo, LightStream, Linksys, MediaTone, MeetingPlace, MeetingPlace Chime Sound, MGX, Networkers, Networking Academy, Network Registrar, PCNow, PIX, PowerPanels, ProConnect, ScriptShare, SenderBase, SMARTnet, Spectrum Expert, StackWise, The Fastest Way to Increase Your Internet Quotient, TransPath, WebEx, and the WebEx logo are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.
All other trademarks mentioned in this document or website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0903R)
© 2009 Cisco Systems, Inc. All rights reserved.
