Administration Guide for Cisco Unified Messaging Gateway Release 8.6 - Logging In to the Cisco UMG Graphical User Interface (GUI) [Cisco Unified Messaging Gateway]

Table Of Contents

Logging In to the Cisco UMG Graphical User Interface (GUI)

Logging In to the Cisco UMG Graphical User Interface (GUI)

Last updated: August 5, 2011

Restrictions

The Cisco UMG GUI only supports the following web browsers:

•Internet Explorer Releases 6, 7, and 8

•Mozilla Firefox Release 3

Before You Begin

•Install the Cisco UMG software. See the Installation and Upgrade Guide for Cisco Unified Messaging Gateway Release 8.6 for information.

•Gather the administrator username and password that you entered during the installation.

Procedure

Step 1 Open a web browser.

Step 2 Enter the IP address of the Cisco UMG system.

The system displays the log-in screen.

Step 3 Enter the administrator name.

Step 4 Enter the administrator password.

Step 5 Click Log In.

The system displays the Cisco UMG dashboard within the Cisco UMG GUI.

About the Cisco UMG Dashboard

You should periodically monitor the status of the system to ensure that the deployment remains ready for failover events. You can monitor the system from the Cisco UMG dashboard.

The Cisco UMG dashboard provides an at-a-glance view of the state of the system. The dashboard contains a summary of items that would typically require the attention of the administrator, such as error and warning messages. When the system is functioning normally, with no alerts or activity, the dashboard shows minimal information.

You can return to the dashboard from anywhere in the system by clicking Dashboard on the top right.

The dashboard is comprised of three areas:

•Provisioning Status: Displays a summary of the results of the most recent provisioning cycle. If all sites have been successfully provisioned, a single success message is displayed. If any sites are disabled, have failed provisioning, or have never been provisioned, the provisioning status panes displays a site count for each provisioning outcome respectively. For provisioning failures, the system generates a system alert message for each site that indicates the reason for the failure. To review site specific results by status, click the corresponding report link.

•Activity Log: Displays a summary of recent site activity. Each voicemail upload process is counted on the dashboard, and recorded in the SRSV Activity History report, which is described in Viewing the SRSV Activity History Report. To clear the activity log, click Clear Activity Log. This also clears the information from the SRSV Activity History report.

•System Alerts: Displays the number of critical, warning, error, and informational alert messages that require attention. To review system alert details by level, click the corresponding link. See System Alerts for more description of the alerts.

	Administration Guide for Cisco Unified Messaging Gateway Release 8.6
	Logging In to the Cisco UMG Graphical User Interface (GUI)
Administration Guide for Cisco Unified Messaging Gateway Release 8.6 Overview and Initial Configuration Cisco Unified Messaging Gateway Overview Cisco Unified Messaging Gateway Administration Interfaces About the Cisco Unified Messaging Gateway GUI Overview of Configuration Tasks Logging In to the Cisco UMG Graphical User Interface (GUI) How to Enable SMTP Support for Cisco UMG on Cisco Unity Connection Configuring E-SRST Site Provisioning Using the Setup Wizard Supporting High Availability Using the Central Call Agent Wizard to Add Cisco Unified Communications Manager Information Using the Central Voicemail Server Wizard to Add Cisco Unity Connection Information Using the Add Branch Voicemail Server Wizard to Add an SRSV-CUE Device Configuring Users Setting User Defaults Configuring Groups Configuring Privileges Configuring Authentication, Authorization, and Accounting Viewing and Removing Central Voicemail Servers Viewing and Updating a Central Voicemail Server Viewing the Cluster Nodes Associated With a Central Voicemail Server Viewing the Call Handlers Associated With a Central Voicemail Server Viewing and Removing the Central Call Agent Viewing and Updating the Central Call Agent Viewing the Cisco Unified SRST References Viewing and Removing Branch Voicemail Servers Viewing the Cluster Nodes Associated With a Central Call Agent Viewing and Updating a Branch Voicemail Server Managing the Branch Voicemail Server Software Viewing and Provisioning Sites Changing the Information for a Single Cisco Unified SRST Site Changing the Information for Multiple Cisco Unified SRST Sites at Once Using Site Templates Creating, Changing, and Viewing a Site Template Configuring Unassigned Branch Voicemail Servers Changing Cisco Unified SRSV System Settings Making Updates to the System Working With DNS Servers Working With Network Time and Time Zone Settings Configuring the System Login Banner Configuring SNMP Settings Displaying System Information About Security for Cisco UMG Working With Trusted TLS Certificates Monitoring and Maintaining the System Monitoring the Learned Cisco Unified Communications Manager Express Routers Monitoring the Provisioning Status of a Branch Device Monitoring the Voicemail Upload Monitoring the Software Upgrade Status Monitoring the System Maintaining the Cisco UMG System Viewing Reports Backing Up and Restoring Data Configuring Backup and Restore Backing Up and Restoring Data Using the CLI Saving and Reloading the Cisco Unified Messaging Gateway Configuration Displaying Cisco UMG License Information Troubleshooting Troubleshooting Using the GUI Troubleshooting Using the CLI CLI Reference Information How to Use the Cisco UMG CLI Scheduling CLI Commands C CLI Commands D CLI Commands L CLI Commands M CLI Commands P CLI Commands S CLI Commands T CLI Commands Glossary	Download this chapter Logging In to the Cisco UMG Graphical User Interface (GUI) Download the complete book Administration Guide for Cisco Unified Messaging Gateway Release 8.6 -- Full-book PDF (PDF - 5 MB) Feedback Table Of Contents Logging In to the Cisco UMG Graphical User Interface (GUI) Logging In to the Cisco UMG Graphical User Interface (GUI) Last updated: August 5, 2011 Restrictions The Cisco UMG GUI only supports the following web browsers: •Internet Explorer Releases 6, 7, and 8 •Mozilla Firefox Release 3 Before You Begin •Install the Cisco UMG software. See the Installation and Upgrade Guide for Cisco Unified Messaging Gateway Release 8.6 for information. •Gather the administrator username and password that you entered during the installation. Procedure Step 1 Open a web browser. Step 2 Enter the IP address of the Cisco UMG system. The system displays the log-in screen. Step 3 Enter the administrator name. Step 4 Enter the administrator password. Step 5 Click Log In. The system displays the Cisco UMG dashboard within the Cisco UMG GUI. About the Cisco UMG Dashboard You should periodically monitor the status of the system to ensure that the deployment remains ready for failover events. You can monitor the system from the Cisco UMG dashboard. The Cisco UMG dashboard provides an at-a-glance view of the state of the system. The dashboard contains a summary of items that would typically require the attention of the administrator, such as error and warning messages. When the system is functioning normally, with no alerts or activity, the dashboard shows minimal information. You can return to the dashboard from anywhere in the system by clicking Dashboard on the top right. The dashboard is comprised of three areas: •Provisioning Status: Displays a summary of the results of the most recent provisioning cycle. If all sites have been successfully provisioned, a single success message is displayed. If any sites are disabled, have failed provisioning, or have never been provisioned, the provisioning status panes displays a site count for each provisioning outcome respectively. For provisioning failures, the system generates a system alert message for each site that indicates the reason for the failure. To review site specific results by status, click the corresponding report link. •Activity Log: Displays a summary of recent site activity. Each voicemail upload process is counted on the dashboard, and recorded in the SRSV Activity History report, which is described in Viewing the SRSV Activity History Report. To clear the activity log, click Clear Activity Log. This also clears the information from the SRSV Activity History report. •System Alerts: Displays the number of critical, warning, error, and informational alert messages that require attention. To review system alert details by level, click the corresponding link. See System Alerts for more description of the alerts.
	Terms & Conditions \| Privacy Statement \| Cookie Policy \| Trademarks