Table Of Contents

C

clear counters interfaces

clear crashbuffer

C

---

Last Updated: August 5, 2011

---

Note For information about other CLI commands that are not listed in this document, see the Cisco Unity Express Command Reference for 3.0 and Later Versions.

---

clear counters interfaces

clear crashbuffer

clear counters interfaces

To clear interface counters, use the clear counters interfaces command in Cisco UMG EXEC mode.

clear counters interfaces

Syntax Description

This command has no arguments or keywords.

Command Default

None. Interface counters are not cleared.

Command Modes

Cisco UMG EXEC

Command History

Cisco UMG Version	Modification
1.0	This command was introduced.

Usage Guidelines

Use this command when you have interface counters you want to clear, for example, the general debug counters. This command clears all counters, including statistics counters.

Examples

The following example illustrates the use of the clear counters interfaces command.

umg-1> enable

umg-1# clear counters interfaces

umg-1# show interfaces ide 0

IDE hd0 is up, line protocol is up

     0 reads, 0 bytes

     0 read errors

     0 write, 0 bytes

     0 write errors

umg-1#

Related Commands

Command	Description
clear crashbuffer	Clears the kernel crash buffer.

clear crashbuffer

To clear the kernel crash buffer, use the clear crashbuffer command in Cisco UMG EXEC mode.

clear crashbuffer

Syntax Description

This command has no arguments or keywords.

Command Default

None. Crash buffer is not cleared.

Command Modes

Cisco UMG EXEC

Command History

Cisco UMG Version	Modification
1.0	This command was introduced.

Usage Guidelines

Use this command to clear the kernel crash buffer after the reasons for a crash are fully investigated.

Examples

The following example illustrates the use of the clear crashbuffer command.

umg-1 enable>

umg-1# clear crashbuffer

umg-1#

Related Commands

Command	Description
clear counters interfaces	Clears the interface counters.