Table Of Contents

Configuring Network Time and Time Zone Settings

Adding an NTP Server

Removing an NTP Server

Changing the Time Zone

Configuring Network Time and Time Zone Settings

---

•Adding an NTP Server

•Removing an NTP Server

•Changing the Time Zone

You must add an NTP server to your Cisco Unified SRSV system and configure the time zone to ensure that voicemails and system processes have the correct date and time associated with them.

Adding an NTP Server

Procedure

---

Step 1 Log in to the Cisco UMG GUI. See the Logging In to the Cisco UMG Graphical User Interface (GUI) module.

Step 2 Choose System > Network Time & Time Zone Settings.

The system displays the Network Time & Time Zone Settings page.

Step 3 Click Add.

The system displays the Add a NTP Server page.

Step 4 Enter the hostname or IP address of the NTP server. To make it the primary NTP server, check the Preferred checkbox.

Step 5 Click Add.

---

What To Do Next

Save and then reload the configuration. See the Saving the Cisco Unified Messaging Gateway Configuration and Reloading the Cisco Unified Messaging Gateway Configuration sections.

Removing an NTP Server

Procedure

---

Step 1 Log in to the Cisco UMG GUI. See the Logging In to the Cisco UMG Graphical User Interface (GUI) module.

Step 2 Choose System > Network Time & Time Zone Settings.

The system displays the Network Time & Time Zone Settings page.

Step 3 Check the checkbox next to the NTP server that you want to remove and click Delete.

Step 4 Click OK at the prompt.

---

What To Do Next

Save and then reload the configuration. See the Saving the Cisco Unified Messaging Gateway Configuration and Reloading the Cisco Unified Messaging Gateway Configuration sections.

Changing the Time Zone

Procedure

---

Step 1 Log in to the Cisco UMG GUI. See the Logging In to the Cisco UMG Graphical User Interface (GUI) module.

Step 2 Choose System > Network Time & Time Zone Settings.

The system displays the Network Time & Time Zone Settings page.

Step 3 Use the drop-down menu to select the correct country.

Step 4 Use the drop-down menu to select the correct time zone.

Step 5 Click Apply.

Step 6 Click OK at the information prompt.

---

What To Do Next

Save and then reload the configuration. See the Saving the Cisco Unified Messaging Gateway Configuration and Reloading the Cisco Unified Messaging Gateway Configuration sections.