SIP Protocol User Guide (Release 4.5.x)
Chapter 6: Counters, Alarms, Events and Messages

Table Of Contents

Measurements, Events, and Alarms

Measurements

Events and Alarms


Measurements, Events, and Alarms


Revised: May 3, 2007, OL-5352-12

This section describes the new Release 4.5.x measurements, events, and alarms related to the SIP protocol. For more complete information on these topics, see the following documents:

For CLI information, see the Cisco BTS 10200 Softswitch Command Line Interface Reference Guide.

For a full list of measurements, see the Cisco BTS 10200 Softswitch Operations and Maintenance Guide.

For complete information on events and alarms, see the Cisco BTS 10200 Softswitch Troubleshooting Guide.

Measurements

In this release, the following counters were renamed:

The common SIP counters were renamed from SIP_ to SIS_.

The application-specific SIA counters were renamed from SIP_ to SIA_.

The SIP audit counters were renamed from AUDIT_SIP to SIA_AUDIT.

The SIM audit counters were renamed from AUDIT_SIM to SIM_AUDIT.

The SIP memory audit counters were removed from the AUDIT category

The following counters were added to the SIA category:

SIA_AUDIT_CCB_FREED

SIA_AUDIT_CALL_RELEASED

SIA_AUDIT_BCM_CALL_RELEASED

SIA_AUDIT_REGCONTACT_FREED

The following counters were added to the SIM category:

SIM_AUDIT_CCB_FREED

SIM_AUDIT_SIP_CCB_FREED

The following SIA counters were deprecated; they will still be displayed in this release, but they will always contain a value of zero:

SIA_TOTAL_SUCC

SIA_TOTAL_FAIL

SIA_TOTAL_OUTG_MSG_FAIL

SIA_TOTAL_INCOM_MSG_FAIL

The following security-related measurements were added to the SIP Interface Adapter category.

SIA_SECURE_FQDN_VIOLATION_REQ

SIA_SECURE_FQDN_VIOLATION_RESP

The following T.38 fax-related measurements were added to the Call Processing category:

CALLP_T38_FAX_MEDIA_SETUP_SUCC

CALLP_T38_FAX_MEDIA_SETUP_FAIL

Events and Alarms

The following SIP-related events and alarms were introduced in Release 4.5.x.

SECURITY(6)—Secure SIP endpoint validation failure, WARNING

SIGNALING(146)—All retransmission attempts of SIP request or response failed, WARNING

SIGNALING(147)—DNS SRV addresses exhausted, WARNING