Table Of Contents

Symbols - A - B - C - D - E - F - G - H - I - J - L - M - N - O - P - Q - R - S - T - U - V - W - X - Z

Index

Symbols

/etc configuration files

description 7-2

managing with VQE CMS 7-2

A

access link bandwidth for each VQE-C A-9

access routes 2-13

address and port-dependent mapping (with NAT) 1-10

alarms B-4

anycast addresses 2-18, 3-8, 3-10

Apache Tomcat application server 1-8, 2-31, D-22, D-39

Application Monitoring Tool (AMT)

See VQE-S Application Monitoring Tool (AMT)

-apply option to vqe_cfgtool 7-18

Area ID parameter 2-28

Area Type parameter 2-28

average stream rate 4-11

B

-backup option to vqe_cfgtool 7-19

bandwidth

conserving with RCC A-6, A-7, A-8

excess fraction A-9, A-10

maximum receive for a VQE-C A-11

on the access link for each VQE-C A-9

per VQE Client policing A-5

reserved for Unicast Retransmission A-5

reserving for incoming unicast traffic A-9

binding requests to STUN Server 1-10

BIOS settings on CDE110 server G-1

Bit Rate field 3-10

Bond interfaces

configuring A-15, A-16, D-5

description 2-12

boot sequence on CDE110 server G-1

C

cable connections 2-4, D-31

cache time A-6

capacity statistics 4-23

CD/DVD drive G-1

centralized logging 2-27, D-22, D-39

certificate authority (CA) certificates

deploying commercial certificates 2-10

generating 2-6

installing 2-9

Certificate Signing Request (CSR)

generating 2-7

Certificate-Signing Request (CSR)

signing 2-8

channel change time 1-5

Channel Lineups window 4-7

channel-provisioning servers 2-27, D-21

channels

associating with servers 1-15

cloning with VCPT 3-13

configuration database in VQE-S 1-9

configuring 3-9

copying associations with a server 3-19

defining server associations 3-19

defining with VCPT 1-15, 3-10

deleting with VCPT 3-13

enabling Rapid Channel Change 3-10

error-repair options 3-11

lineups 1-7, 1-15, 1-22

Member Receiver Population 4-7

modifying configuration C-3

multicast streams 3-10, 4-11

provisioning with VCPT 1-7, 1-16

rules for adding 3-11

viewing configuration with VQE-S AMT 4-8

viewing details with VCPT 3-12

viewing details with VQE-S AMT 1-21

viewing statistics with VQE-S AMT 4-10, 5-7

check_daemons script 2-31, D-23, D-40

Cisco CDA Visual Quality Experience Application

See Cisco VQE

Cisco CDE 1-4, 1-7, 1-9

Cisco CDE110 1-26

bandwidth limits H-1

configuring MIBs D-20, D-22, D-37, D-39

initial configuring for VQE-S 2-22, D-2

initial configuring for VQE Tools 2-22, D-30

restarting D-28, D-44

terminal emulation software 2-3

viewing hardware information 4-6, 5-4

Cisco CDE111

bandwidth limits H-1

Cisco CDE250

bandwidth limits H-1

Cisco Digital Content Manager (DCM) 1-3, 1-7, 1-12

Cisco end-to-end IPTV solution model 1-14

Cisco set-top boxes 1-4, 1-12, 1-14

CISCO-SYSLOG-MIB

See SNMP

Cisco technical support 6-30

Cisco VQE

benefits 1-8

deployment options 1-14

deployment requirements 1-14

Hybrid Error Repair 1-4

major components 1-3

overview 1-2

reference architecture model 1-14

software components 1-4

software installation and upgrade 2-1

Cisco VQE Client (VQE-C)

See VQE Client (VQE-C)

Cisco VQE Server (VQE-S)

See VQE Server (VQE-S)

CISCO-VQES-MIB B-5

See SNMP

client database file 1-19, 1-20, F-1, F-2

cloning channels 3-13

commands

su and sudo 2-4

vcds_send_file F-1

vqe_cfgtool 7-18

vqereport 6-29

-config option to vqe_cfgtool 7-19

configuration delivery infrastructure (CDI) E-1, E-2, F-1

Configuration Engine (CE) 7-1

configuration files

managing with VQE CMS 7-2

Configuration Management System

See VQE Configuration Management System (VQE CMS)

configuration parameters (VCDB)

description A-1

network parameters A-15

OSPF parameters A-18

Rapid Channel Change parameters A-6, A-9

RTCP Exporter parameters A-12

system parameters A-12

Unicast Retransmission parameters A-5, A-9

VQE-S global parameters A-2

See also VCDB parameters

Configuration Tool (CT)

description 7-1, 7-3

information on parameters 7-5

parsing errors 7-3

Root Menu 7-4

using 7-4, 7-5

vqe_cfgtool command 7-18

configuring VQE-S and VQE Tools servers 2-1

manually D-1

Control Plane process

monitoring by Process Monitor 1-10

monitoring with Linux commands 2-39, D-28

monitoring with VQE-S AMT 4-5

CPE (customer premises equipment) 1-3, 1-4

VQE-C integration 1-14

VQE-C interface to VQE-S 1-11

D

Data Plane process

monitoring by Process Monitor 1-10

monitoring with Linux commands 2-39, D-28

monitoring with VQE-S AMT 4-5

date and time

changing with Network Time Protocol 6-9, 6-31

changing with the date command 6-10

dead interval (OSPF) A-20

Dead Interval parameter 2-29

debugging

configuring options 4-33

messages written to vqe.log file 4-33, 5-9

options in VQE-S AMT 1-22

dedicated interfaces 2-15, D-15

defining a channel 3-8

defining channel associations with VCPT 3-19

delay of IPTV packets 1-2, 1-13, 1-23

Delete button in VCPT 3-4

deleting channels 3-13

Differentiated Services Code Point (DSCP)

configuring for RCC A-8

configuring for RTCP packets A-4

configuring for STUN Server binding requests A-4

configuring for Unicast Retransmission A-6

description 1-10

viewing configuration 4-17

Digital Content Manager (DCM) 1-3, 1-5, 1-7, 1-14

directories

for VCPT 6-4

for VQE-S 6-4

Domain Name System (DNS) servers 1-17, 2-24, A-12, E-1

DSL

Cisco VQE for 1-2

noise issues 1-8

Dynamic Host Configuration Protocol (DHCP) servers E-1

dynamic routing feature 2-14

E

Enable MD5 parameter 2-28

Entitlement Control Messages (ECM) 1-6

Equal Cost Multipath (ECMP) routes 2-19, 2-26, A-17, D-8

error messages C-4

error repair

average rate 4-12, 4-19

configuring 3-11

options 3-8, 3-11

See also FEC

See also Unicast Retransmission

Ethernet ports

CDE110 1-26

configuring 2-24, A-15

Layer 3 connection 2-4

MIB B-4

numbering D-3, D-31

excess bandwidth fraction A-9, A-10

configuring A-9, A-10

maximum A-11

minimum A-11

viewing configuration 4-16

viewing distributions 4-21

Export button in VCPT 3-4

exporting RTP statistics 1-13, 1-23

F

facility codes C-1

failover protection 2-18

Fast Decoder Buffer Fill (FDBF) 1-7, A-6

FEC

configuring 3-11

description 1-2, 1-12

Hybrid Error Repair 1-4

one and two dimensions 1-12

stream generator 1-3

VQE-C implementation 1-12

feedback target addresses

anycast addresses 2-18, 3-8, 3-10

static routes on attached router 2-47

Feedback Target IP field 3-10, 3-11

feedback target routes 2-13

filenames

VCPT configuration files 3-4

VQE-S and VCPT 6-3

files

for VCPT 3-3, 6-4

for VQE-S 6-4

replacing a lost file 6-5

-fix_checksum -option to vqe_cfgtool 7-19

-fix_config option to vqe_cfgtool 7-19

Force Update button 3-6

forward error correction

See FEC

G

group attribute file 1-19, 1-20, F-1, F-2

H

hello interval (OSPF) A-19

Hello Interval parameter 2-29

hostname

configuring 2-24, D-4, D-33

parameter A-12

HOST-RESOURCE-MIB B-4

httpd service

automatic start 2-31

error log 4-6, 5-4

log files 6-11, 6-15

restarting 6-11, 6-14

verifying status D-22, D-39

HTTPS clients (trusted)

configuring on a VQE-S 2-27, D-21

configuring on a VQE Tools server D-38

Hybrid Error Repair

Cisco VQE benefit 1-8

configuring 3-11

description 1-4

See also error repair

HyperText Transfer Protocol daemon 2-31, D-22, D-39

I

If A-3

ifconfig command D-6, D-34

IF-MIB B-4

I-frames 1-6

IGMP

channel change delay 1-2

fast leave in access node A-7

join variability A-6

latency data 4-6

VQE-S and multicast groups 1-9

Import button in VCPT 3-4

ingest of multicast streams 2-14, 2-29, 2-30, A-3, D-16

initial configuration tasks 2-1

with manual configuration D-1

Input Bandwidth Table 4-27

installing software 2-1

INTEL-SERVER-BASEBOARD5 MIB B-4

Interface parameters

reference information A-15

interfaces

configuring 2-24, 2-25, A-3, D-4, D-5, D-15, D-18, D-33

configuring with Configuration Tool 7-6

configuring with VCDB parameters A-3, A-4

dedicated 2-15, D-15

for VQE-S ingest and services traffic 2-30, A-3, D-17

for VQE-S ingest traffic 2-29, A-3, D-16, D-17

for VQE-S services traffic 2-29, A-4, D-16, D-17

shared 2-15, D-15

Interface Summary Table 4-26

ip link show command D-6, D-34

IPTV

existing and new deployments 1-14

packet loss 1-2, 1-23

packets 1-7

statistics 1-9

subscribers 1-2

video services 1-2

IPTV Packet Loss Monitoring

description 1-2

with VQE-S RTCP Exporter 1-23

IPTV Services Delivery Server (ISDS)

cannot send channel information 6-13

J

jitter 1-2, 1-13, 1-23

L

Linux operating system 1-4, 1-8, 1-9, 1-26

initial configuration D-3, D-31

MIBs D-20, D-37

load balancing

of VQE-S services 1-9

on VQE-Ss 2-18

log files (VQE-related) 4-6, 5-4, 6-2

logging

configuring levels 4-33, 5-7, A-2

levels A-2

messages written to vqe.log file 4-33, 5-7, A-2

viewing log files 4-6, 5-4

look-aside mode 1-8

Loss RLE report block type 1-23, 4-8

lost files 6-5

M

management networks

configuring for VQE-S hosts 2-13, D-6

configuring for VQE Tools hosts 2-22, D-34

configuring with VQE Configuration Tool 2-26

maximum receive bandwidth (MRB) A-9, A-11

MD5 authentication VCDB parameters A-19

MD5 Key ID parameter 2-28

MD5 Key parameter 2-28

Member Receiver Population 1-22, 4-7

messages

See system messages

Microsoft Internet Explorer 2-2

Mozilla Firefox 2-2

MPEG Parser 1-9

Multicast Group Table 4-28

multicast IP addresses 3-10

Multicast IP field 3-10

multicast IPTV 1-2

multicast latency 1-6

Multicast Load Balancer process

description 4-27

monitoring 4-5, 4-26

Process Monitor role 1-10

verifying it is running 2-39, D-28

viewing statistics 1-21

multicast streams

average rate 4-11

for channels 1-9, 1-26, 3-10

monitoring 6-8

multiple definitions of VCDB parameters 7-15

N

NACK messages

statistics 1-22, 4-11, 4-18

NAT

See Network Address Translation

Net-SNMP B-3, D-20, D-37

Network Address Translation (NAT)

description 1-10

STUN Server A-4, D-20

network configuration file 1-18

network information 4-6, 5-4

network parameters

configuring 7-4

Network Time Protocol (NTP)

configuring 2-24, D-19, D-36

daemon 2-31

parameter A-12

with SSL certificates 2-8

New Config button 3-4

ntpd service 2-31

configuring and starting D-22, D-40

started automatically 2-31

verifying it is running 2-39, 2-41

O

Open Configuration button 3-4

open-source software 1-14

OpenSSL Project 2-5

original stream for a channel 3-10

OSPF

configuring for VQE-S traffic D-10

configuring system services D-23

initial configuration parameters 2-28

on router attached to VQE-S host 2-44

on VQE-S host 2-14

routing type VCDB parameter A-18

status in VQE-S AMT 4-6

VCDB parameters A-18

verifying edge router configuration D-13

verifying system services D-25

verifying VQE-S configuration D-11

VQE-S host in area 0 2-46

VQE-S host in separate area 2-45

ospfd service 2-31, D-23

P

packet loss 1-2, 1-13, 1-23

packets

for IPTV 1-7

lost 4-11

received 4-11

repair 4-11

repair statistics 4-18

RTCP 4-12

parameters

See VCDB parameters

passwords

for root user 2-24

for vqe user 2-4, 2-24

requirements 2-24

per-client network configuration 1-18

permissions for files and directories

changing 6-5

for VCPT 6-4

for VQE-S 6-4

policing A-5

port usage on VQE-S 3-11

Process Monitor process 1-10, 2-39, D-28

Program Association Tables (PAT) 1-6

Program Clock Reference (PCR) 1-6

Program Map Tables (PMT) 1-6

Q

Quagga

processes 2-31, D-23

routing package 2-14

R

random access points (RAPs) 1-6, 4-17

Rapid Channel Change (RCC) 1-2, 1-4

conserving bandwidth A-6, A-8

e-factor histograms 4-14, 4-15, 4-21, 4-22

enabling with VCPT 3-10

monitoring statistics 1-22, 4-18, 4-23

parameters A-6

viewing configuration 4-8, 4-16

viewing statistics 4-12

VQE-S role 1-9

Re-Activate button in VQE-S 4-7

Real Time Streaming Protocol (RTSP) 1-17

Real-Time Transport Protocol (RTP) 1-2, 1-3, 1-7, 1-14

repair packet statistics 4-18

rebooting

VQE-S C-3, D-28

VQE Tools server D-44

recovery procedures C-3

Red Hat Enterprise Linux 5.1 operating system 1-26, D-3

redundancy for VQE-S 1-10, 2-18, 3-8

repair packets 4-11

reset counters 4-31

Resetting the root password 6-31

resiliency of VQE-S 1-10

restarting

VCDS 6-31

VQE-S 6-30

VQE-S channels C-3

restore counters 4-32

-restore option to vqe_cfgtool 7-19

RMON MIB B-4

root user 2-4, 2-23, 2-32

router attached to VQE-S host

OSPF routing guidance 2-44

static routes for feedback targets 2-47, 3-8

Router ID parameter 2-28

router ID VCDB parameter A-18

routing configuration

for shared interfaces 2-15

overview 2-12

See also OSPF

routing types with VQE-S 2-27

RTCP Exporter

See VQE-S RTCP Exporter

RTCP Port field 3-10, 3-11

RTCP Reports

description 1-23

viewing configuration 4-8

RTP Control Protocol (RTCP)

compound packets 1-23

description 1-7, 1-15

enabling and disabling 3-10

industry standards 1-2

packet statistics 4-12

sender and receiver reports 1-13

RTP inactivity timeout A-4

RTP Port field 3-10, 3-11

RTSP DESCRIBE E-2

S

-sanity_check option to vqe_cfgtool 7-20

Scientific-Atlanta IPTV Layer (SAIL) 1.x and 2.x 1-4

screen resolution requirements 2-2

SDP files created by VCPT 3-3

Secure Shell (SSH) 2-4

Secure Shell daemon 2-31, D-22, D-39

Secure Sockets Layer (SSL) certificates

See SSL certificates D-3

security restrictions 2-4

selective retransmission

See Unicast Retransmission

Send button 3-5

sending channel information 3-5

serial ports 1-26

server.crt file 2-9, 2-10

server.key file 2-9, 2-11

servers

adding 3-16

defining with VCPT 3-14

deleting with VCPT 3-18

viewing server information 3-17

services

configuring and starting D-23, D-43

started automatically 2-31

traffic for VQE-S 2-14

VQE-S 1-10, 2-31, 6-30

Session Description Protocol (SDP) 1-7

set-top boxes 1-4, 1-7, 1-12, 1-14

severity levels C-2

shared interfaces 2-15, D-15

SMPTE 2022 standard

stream orderings 1-13

VQE-C extensions 1-13

SNMP

agent B-2

AgentX B-3

CISCO-SYSLOG-CAPABILITY B-5

CISCO-SYSLOG-MIB B-5

CISCO-VQES-MIB B-5

CISCO-VQE-TOOLS-MIB B-5, B-8

columnar objects B-1

community strings 2-27

configuring 2-27, D-20, D-37

events 1-27

Intel subagent B-3

management hosts 2-27, A-13

MIB 1-12, B-1

object identifier B-2

parameters A-13

protocol-related counters B-4

scalar objects B-1

snmp manager B-1

SNMP subagent B-3, D-22

snmp subagent B-1

SNMPv2 B-2

trap 2-27, B-2

viewing SNMP configuration 4-6, 5-4

snmpd service 2-31, D-22, D-39

SNMP-NOTIFICATION-MIB B-4

snmpsa service 2-31, D-22, D-39

SNMP subagent D-39

SNMP subagent daemon 2-31

SNMPv2-MIB MIB B-4

software components of Cisco VQE 1-4

software development kit (SDK) for VQE-C 1-13

software installation and upgrade 2-1

Source IP field 3-10, 3-11

SSH certificates 3-19

sshd service 2-31, D-22, D-39

SSL certificates

deploying commercial 2-10

deploying your own 2-7

error log 4-6, 5-4

setting up 2-5, D-3, D-31

VQE Configuration Tool 2-26

stackedChain.pem file 2-9, 2-10, 2-11

starting

VCDS 6-31, D-43

VQE-S 6-30, D-27

static routes

configuring for VQE-S traffic D-8

for a distribution network D-6

for a management network D-6, D-34

for feedback targets 2-44, 3-8

limitations 2-13

on VQE-S 2-13

statistics

channels 4-10, 5-7

Error Repair 4-16, 4-18, 4-23

packet-loss monitoring 1-21

RTCP Exporter 4-29

Status of Last Send messages 3-15

Status of Last Send Time 3-16

status of VQE-S processes 1-7

stopping

VCDS 6-31

VQE-S 6-30

Store As button 3-4

Store button 3-4

stream generators for FEC 1-3, 1-12

STUN Client 1-10

STUN Server 1-10

configuration 1-11

enabling A-4, D-20

monitoring 4-5

su or sudo commands 2-4

symmetric NAT 1-10

syslog_snmpsa service 2-31, D-39

syslog messages

See system messages C-1

syslog snmp service D-22

system.iptables.trusted_provisioner parameter A-14, D-38

system console 2-5

system information

system status 4-6, 5-4

system messages

description C-1

no channel configuration D-27

online file with reference information C-4

setting logging level 4-33

severity C-2

structure C-1

viewing system log 4-6, 5-4

VQE-S logging 6-2

written to vqe.log 4-33, 5-7, 6-2

system parameters

configuring 7-4

reference information A-12

See also VCDB parameters

system services

on VQE-S host 2-31, D-23

on VQE Tools host 2-31, D-40

system time

changing with Network Time protocol 6-9, 6-31

changing with the date command 6-10

T

Telco Alarm Management 1-27

terminal emulation software 2-3

terminal servers 2-5

time zones 2-24, A-13, D-19, D-36

tomcat5 service

automatic start 2-31

log files 6-11, 6-15

restarting 6-11, 6-14

verifying status D-22, D-39

Tomcat log 4-6, 5-4

TR-135 statistics 1-12

TRAP listeners B-4

troubleshooting

channels not displayed in VQE-S AMT 6-11

internal server error in VCPT 6-15

multicast streams 6-8

no graphs in VQE-S AMT 6-12

repeated messages on Cisco CDE110 6-9

VCPT cannot send channel information 6-13, 6-15

VCPT unavailable 6-10

VQE-S, VQE-S AMT, and VCPT 6-7

VQE-S AMT unavailable 6-10

trustedca file 2-10, 2-11

trusted provisioning clients 2-27, 6-13, A-14

trusted provisioning servers 2-27, 6-13, A-14

U

unicast reservation A-9

Unicast Retransmission

bandwidth reserved A-5

configuring 3-11

description 1-2

Hybrid Error Repair 1-4

monitoring statistics 1-21, 1-22, 4-16

parameters A-5

per VQE Client policing A-5

viewing statistics 4-18, 4-23

VQE-C role 1-11

VQE-S AMT 1-7, 4-16

VQE-S role 1-4, 1-9

Unicast Retransmission Stream fields 3-11

upgrading software 2-1

usage statistics for channels 1-22

V

vcdb.conf.sample file 7-15

description 7-15

on VQE-S 6-4

on VQE Tools server 6-4

parameter information in 7-16

vcdb.conf.tools.sample file 6-4

VCDB file (vcdb.conf)

RTCP Exporter 2-42

VCDB parameters

entering data 7-6

multiple definitions allowed or not allowed 7-15

order of 7-15

reference information A-1

those not configurable with CT 7-5

VCDB Parser

parsing errors 7-3

VCDS

See VQE Client Configuration Delivery Server (VCDS)

vcds_send_file command F-1, F-2

vcds_snmpsa service 2-31

VCDS AMT

SeeVQE Client Configuration Delivery Server (VCDS)

VCDS Application Monitoring Tool (VCDS AMT) 5-1

configuring VCDS debugging 5-9

description 1-7

log files 5-7

logging in 5-2

navigating 5-2

VCDS Configuration Window 1-25

VCDS Status Information 1-24

VCDServer process D-43

vcds service

configuring and starting D-43

started automatically 2-31

verifying status D-45

vcds snmp service D-39

VCPT

See VQE Channel Provisioning Tool (VCPT)

verifying host system

for VCPT D-44

for VQE-S D-28

verifying system services 2-38, 2-40, D-23, D-39, D-40

video quality 1-2, 1-8, 1-23

video-quality monitoring (VQM) application 1-23

viewing channel details 3-12

VQE

See Cisco VQE

vqe.log file 4-33, 5-7, 5-9

vqe_cfgtool command 7-18

-config option 7-3

VQE Channel Provisioning Tool

managing files 3-3

VQE Channel Provisioning Tool (VCPT)

adding servers 3-16

cloning channels 3-13

configuration filenames 3-4

configuration files 3-3

copying channel associations 3-19

csv I-25

csv format I-21

defining channel associations 3-18

defining channels 2-18, 3-8, 3-9

defining servers 3-14

deleting channels 3-13

deleting servers 3-18

description 1-7, 1-15

exporting I-1

export to remote server 1-17

GUI 1-16

importing I-1

initial configuring 2-1, D-1

interactions with VQE Client Configuration Delivery Server 1-16

interactions with VQE-S 1-16

log files 6-3

logging in 3-2

provisioning channels 3-7

sending channel information 3-7

software 1-26

SSL certificates 2-5

Status of Last Send messages 3-15

troubleshooting 6-7

trusted HTTPS clients D-21

using 3-1

verifying status D-44

viewing channel information 3-12

viewing server information 3-17

VQE deployment 1-15

VQE reference architecture model 1-14

xml schema I-1, I-8

VQE Client (VQE-C)

Cisco end-to-end IPTV solution model 1-14

description 1-4, 1-11

DHCP and DNS servers E-1

Error Repair 1-11

FEC 1-12

IPTV Packet Loss Monitoring 1-11

maximum receive bandwidth A-11

Network Address Translation (NAT) 1-10

network configuration 1-20

network connectivity 1-15

number receiving a channel 1-22

per-client policing A-5

policing A-6

policing for Unicast Retransmission A-5

Rapid Channel Change 1-7

set-top box integration 1-14

software development kit 1-13

system configuration provisioning server 2-27, D-38

VQE reference architecture model 1-14

VQE Client Configuration Delivery Server (VCDS)

defining with VCPT 1-15

description 1-7

DHCP and DNS servers E-1, F-1

interactions with VQE Client 1-17

log files C-1

role in VQE-C network configuration 1-20

software 1-26

starting D-43

starting and stopping 6-31

system messages C-1

verifying status D-43, D-45

VQE reference architecture 1-14

VQE Configuration Database (VCDB)

description 7-1

parameters A-1

used for multiple CDE110 servers 7-3

VQE Configuration Management System (VQE CMS)

description 7-2

vqe_cfgtool command 7-18

VQE Configuration Tool

configuration items 2-23

See Configuration Tool

VQE-C system configuration provisioning server 1-19, 1-20

VQE-GROUPATTR keyword F-2

VQE-GROUPMAP keyword F-2

vqereport command 6-29

vqes_snmpsa service 2-31

VQE-S Application Monitoring Tool (AMT)

configuring logging 4-33, 5-7

configuring VQE-S debugging 4-33, 5-9

log files 6-3

logging in 4-2, 5-2

monitoring health of VQE-S processes 4-4, 5-3

monitoring interfaces 4-26

monitoring Multicast Load Balancer 4-26

monitoring VQE-S RTCP Exporter 4-28

navigating 4-4, 5-2

troubleshooting 6-7

using 4-1

viewing channel configuration and status 4-7, 5-4

viewing log files 4-6, 5-4

web application 1-22

VQE-S Application Monitoring Tool (VQE-S AMT)

description 1-21

VQE Server (VQE-S)

bandwidth reserved for inbound requests A-9

cable connections 2-4

configuring 2-1, D-2

configuring static routes D-5, D-8

configuring VCDB parameters 7-4

counters restarted 1-22

current status 4-5

debugging levels 1-21

defining with VCPT 1-15

description 1-4, 1-7, 1-9

Equal Cost Multipath (ECMP) routes 2-26, A-17, D-8

global parameters A-2

ingest and services traffic A-3, D-17

ingest traffic 2-14, 2-29, A-3, D-17

initial configuring 2-1, D-1

log files 6-2

logging levels 1-21

monitoring health of processes 1-21

network connectivity 1-15

per-client policing A-5

policers 1-9

processes 1-10, 2-39, 4-5, D-28

Rapid Channel Change 1-9

redundancy 1-10, 2-18

resiliency 1-10

routing overview 2-13, 2-14

service (vqes) 1-10, 2-31, 6-30

services traffic 2-14, 2-29, A-4, D-16

software 1-26

software version 4-5, 5-4

starting D-27

starting and stopping 6-30

static routes D-10

STUN Server A-4, D-20

system messages C-1

system up time 4-5, 5-3

trusted channel-provisioning servers 2-27, D-21

Unicast Retransmission 1-9

verifying status D-28

viewing log file 4-6

VQE-S RTCP Exporter

configuring and enabling 2-42, A-12

description 1-23

IPTV Packet Loss Monitoring 1-2

monitoring with VQE-S AMT 4-28

RTCP packet statistics 1-21, 4-29, 4-31

vqe-s snmpsa service D-22

VQE Startup Configuration Utility

pre-configuration worksheets 2-32

Root Menu choices 2-35, 2-36

routing configuration 2-12

VQE Tools server

configuring 2-1, D-30

verifying status 2-40

vqe user ID 2-4, 2-24, 2-32, 2-34, 2-40, 2-41, D-4, D-33

vqm_host parameter A-12

vqm_port parameter A-12

VQM Host information 4-29

VQM TCP Port

information 4-29

W

watchquagga process 2-31, D-23

web browser requirements 2-2

wheel group 2-4

X

xDSL 1-2

XML schema and examples

for client database file 1-20, F-1

for group attribute file 1-20, F-1

Z

zebra service 2-31, D-23